I've got O2 IIs in HK last week. and tried to find another Bluletooth Phone such as Nokia/Sony Ericcson/Motorola Im using.
My O2IIs could find them as Obex/Serial Port on them, but couldnt find any Dial Up Modem.
Also tried to find Network connection. no this function,eighter!!
Installed to try BluetoothGPS.zip on IIs, Bluetooth is not turned on any more. also copy and paste some excuting files of BluetoothGPS.zip to IIs
also couldnt work.
@I think IIs doesn't have the function of Dial Up Modem Client.......
@Do anyone of you get infromation to use IIs as a Dial Up Modem Client of GPRS with another BT Mobile Phone???
Hello everybody !
I have problems connecting my Jamin to wireless networks. When I start wireless Jamin can't find any of the 3 wireless networks that my laptop can find in my area, but when I move it in another room it finds some other networks that are present there. Is there a registry hack to make him connect only to some specific type networks? The network I'm interested has a Cisco Aironet access point and uses a 128 bits WEP key and open authetication. I've had before a Qtek 8310 and I've got the same symptoms.
Any ideas ? And another question: whch is the best registry editor for this device ?
Thank You very much for Your time !
me to
I have Jamin . and i can't find wireless networks even after SR \ HR
I'm not sure if I'm the only daft bat that does this. But in the past i would use my Hermes under wm6 as a Bluetooth Pan Internet sharing connection with my BA as it had the ability to either Host or establish a Bluetooht PAN link.
Since i've upgraded the BA to Wm6 I've noticed that as with my hermes the betowrk options are severly depreciated. and now when i search for Bluetooth services on the hermes it only shows Dial up networking but doesn't give you the option of Bluetooth PAN as a service it can find or give. also Can not set the init string to send to Bluetooth modem if choosen. thusly cannot tell it the access point etc.etc.
Is there any advise possible to help me link the BA with my hermes using Bluetooth PAN for the internet sharing through the hermes ( yea i know but HSDPA is far faster then the BA's basic 3g hehehe)
RESOLVED: the problem is in the Bluetooth stack of this rom. in short the Wm6 rom appearantly can't find a PAN connection at all as I tried to find the one on my PC at home and it definatly didnt' show anything accept a serial port. However my hermes could see the personal network conenction and once reflashed to the t-mobile latest rom it can now establish a PAN network conenction with pc or hermes300.
guess the bluetooth profiles in the rom for the BA in wm6 are a bit lacking at moment
It works great in Vista
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
edwardgonen said:
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
Click to expand...
Click to collapse
cool, only problem here is that my Hermes 300 ( t-mobile vario II) using Schaps 3.54c Wm6 Rom has the bluetooth Pan driver for internet sharing, as well as the modem link yea? And the Blue angel now being Windows mobile 6 doesn't show like Wm2003 did. in Wm2003 you could create a Bluetooth Netowrk connection for PAN to the hermes. Or a bluetooth serial connection to the hermes Modem link. Now it only shows Dial up networking in both since they are both wm6. And also doesn't give you the option of an init string entry in the advance network options for the AT+CGD init string that also lists the part "ip", "general.t-mobile.uk" which is the access point when doing Bluetooth DUN.
How would i establish a PAN connection to the hermes Internet sharing with the BA under Wm6 from helmi is the real question?
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other then me has tried this.
Hermes300 windows mobile 6
Blue angel Helmi Windows mobile 6
cannot make a Pan connection in either direction Hermes to Blue angel, or Blue angel to hermes.
this means potentially people with Pda's ( ie: Compaq or HP Ipaq's runnign Wm6 ) or other mobile with wm6 will not be able to use the Helmi rom for internet sharing and really are better off leaving WM2003se on as has more compatability in that regard.
If however others have tried this and found a way to get it working please post =)
Me too
cyberjak said:
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other than me has tried this.
Click to expand...
Click to collapse
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
HeMan321 said:
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
Click to expand...
Click to collapse
you can still use the Modem link if you can get it to create a serial port bluetooth link , ie: pair the devices and select Serial Port. then under the connections then you would tell it to use Bluetooth Modem
and put in the advanced dialing string for bluetooth DUN.
there are a few threads about bluetooth DUN on this forum.
the only thing i can thnk of that would make this not work however is if the roms your using are cooked roms and the profiles in the bluetooth stack are missing on 1 or both for the features suggested.
this is what stopped me from having this work as the wm6 on the Hermes and on the Helmi rom are missing the profile for HOSTING a PAN directly without internet sharing and dont' offer bluetooth serial port as an option
Hi,
got a little problem, here in germany we've got flatrates for calls to the landline (<- hope this is correct). And there it is possible to to connect to an internetprovider wich uses such a number. At my SonyEricsson K610i it wasn't a problem to set it the way that everytime I opened the internet explorer it connected automaticaly with this number insted of the gprs connection.
Now my question is, could I set it the same way on my Thyphoon with WM06? I tried to creat a dial-up connection but I don't know which connection he choose, because there is only the connected symbol in at the taskbar!
Could someone help me?
Tanks a lot!
Hi,
Anyone can guide me how connect the universal with a nokia phone via Bluetooth.
The reason is to connect to the internet via the nokia phone.
I have pair the Universal and the Nokia but cannot connect (it connects and disconnects)
I think I miss the APN , but I cannot find where to put it in.
Please help
JoseF
Solved
Fixed.
Get a regeditor,
1. Go to HKEY_LOCAL_MACHINE\DRIVERS\Unimodem\Init
2. Right-click value 1 and select Edit
3. Change value data to :
AT+CGDCONT =1,"IP","APN.intenet.yoursprovider."
This if you are running WM6.
Regards
JoseF