Hi can anybody help i have a 6915 tht i have tried to upgrade from spannish to english .Everyhing seemed to go fine but at the end had to hard reset now its stuck on hp logo screen. Now i have tried various fixes for this but to no avail. I cannot even connect to it via activesync.ive tried leaving battery out all night.Ive also tried the uni_exitbootloader but as i said before i cant even connect to it.Is there any other way of connecting apart from the cradle?Ie
perhaps some sort of serial cable or perhaps booting from sd card or something.I really am fed up as you can imagie as i think i now have a 600 euro paper weight lol.
Anyway if anyone can help or pehaps point me in the right direction it would be really apreciated .phil.
no joy
its still the same has anyone else had this same fault.
regards phil
Yup.... mine is also stuck on HP logo.... nothing is getting the sucker out of it at the moment...! If i manage to get it goin, ill let u know.... but if anyone else knows a way around this...... PLEASE let us know! Havin major hassles getting mine to an english OS......
help still
anyone have an answer to this or is it a brick regards phil
Follow these steps and should be fine:
1.Battery up 70 % charge;
2. Pull and try one of these archives:
http://rapidshare.com/files/79905049/_Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar.html
http://rapidshare.com/files/154798440/HW6915_ROM_FOR_G4-121UK_.exe.html
3.from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend.
4.Аnd you should be happy with the restored 600 $
Good luck
Need help
I fail ungrade OS
I got stuck in HP logo and not connected ActiveSync
I think i must boot from mini-SD card.
Please someone help me!!!
WOOOHOOOO
Heya!
The repair above worked.... ALTHOUGH.... no GSM tho... at least i got my 6915 back up AND IN ENGLISH! THANK YOU!!!!!!!!!!
Sulphy said:
Heya!
The repair above worked.... ALTHOUGH.... no GSM tho... at least i got my 6915 back up AND IN ENGLISH! THANK YOU!!!!!!!!!!
Click to expand...
Click to collapse
Hi Sulphy! How did you get that? Mine stuck on HP logo too and can't connect to Activesync, any PERTICULAR way to connect?
3circles said:
Hi Sulphy! How did you get that? Mine stuck on HP logo too and can't connect to Activesync, any PERTICULAR way to connect?
Click to expand...
Click to collapse
Heya! Ok, what i did was the following,
1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english....
mine has been in brick phase for weeks now, its the first time i managed to get the OS back up! Now i need to sort out the GSM problem....!
Hope this helps!!!
Thank you guys
It worked!!!!
I change it English too
Thanks a lot!!!!!!!!!!!!!!!!!!!!!
Hi Sulphy,
Many thanks for your guide! Mine ok now!
You are really a good man!
whooooooooo hurrraaaaaaayyyyyy
tried it and it works 100% even radio . You dont know how happy i am .regards phil. Thanks spgi
Same Programme for HP 614C Posible?
My HP 614C not boot SD Loader not Works
Any GSM fixes yet??
Hey people¬!
Glad to hear that some got thier phones back and workin.... although, has anyone got the NO GSM sorted yet please? I have tried a few 'fixes' out on the forum to no avail!
please let me know if you got your GSM sorted.....
As for the 614, i dont think this fix will work.... i dont have a 614, so cant help out much there....!!!!
If i get my GSM sorted, ill do a full rom dump and post.....! So, anyone, please let us know!!
Cheers
Sulphy
Flashing
If you do not know what you are flashing, do not flash it. Do your research before you flash anything.
We have alot of hw69xx bricks because of this, including mine.
I have to this day only fixed 2 "NO GSM" phones, I am asking anyones help to fix others.
Post in my thread "OFFICIAL hw6900 NO GSM FIX FOR SOME PHONES / WM 6 PORT "
Thank You
Error 501
spgi said:
Follow these steps and should be fine:
1.Battery up 70 % charge;
2. Pull and try one of these archives:
http://rapidshare.com/files/79905049/_Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar.html
http://rapidshare.com/files/154798440/HW6915_ROM_FOR_G4-121UK_.exe.html
3.from folder delete CEBL.nbf, RadioFS.nbf, RadioOS.nbf, and view picture from attachmend.
4.Аnd you should be happy with the restored 600 $
Good luck
Click to expand...
Click to collapse
Error 501, os...
Help!!!
hi
i have the same serial, hp logo, vG.39 problem, i want to repair it but with spanish languaje, can anybody helps me?
when appears serial in the screen , must i plug the pda to the pc with serial cable to repair it or usb cable?
thanks
Hello...this is my problem too...my hw6915 screen: hp+ logo...
I probed this solution:
"1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english...."
but this is the end (see the attachments)...
What my problem? Help please...
Ooops...this solution working on xp, not working x64 Vista...
THX!
Working...!
yes ,it is vevy good
Sulphy said:
Heya! Ok, what i did was the following,
1: hold down the 2 function buttons on either side of the joystick (NOT the call answer and call kill buttons, between them )
2: while holding the buttons down, use the pen and press the reset button at the bottom of the phone.
You should now have a bootloader screen, with an HP logo, and SERIAL or USB line of text at the top, and a G.39 version text at the bottom of the screen....
Activsync need not be connected at this stage, just your USB cradle or cable....
3: Download and extract the _Sable___G3_DEVICE_ONLY_hw6915-1.21uk.rar file from above... remember to delete the files from folder - CEBL.nbf, RadioFS.nbf, RadioOS.nbf..
4: run the sableRUU.exe ... this will now install the CE OS in english....
mine has been in brick phase for weeks now, its the first time i managed to get the OS back up! Now i need to sort out the GSM problem....!
Hope this helps!!!
Click to expand...
Click to collapse
yes .thanks...............
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
Hello ,
after install some programs and games today i switch off the phone and when i turn on , he ask me for aligned de screen and makes automatic instalation of O2
software , and now he not recognized the SIM (not O2), so i cant make phone
call's.
can anyone help me?
regards
hello everyone! i have read some topics of the forum and i really liked it!
well here is my problem!
I just bought an HTC Touch 3g mobile phone... and i downloaded a program named "LEng" in order to translate windows into greek! When the program asked me to restart device i clicked "yes".
From then the device "stucks" on the windows loading screen and never goes on!!
Well my question is:
Is there any way to format the device and reinstall windows? or should i do something else?
thanks in advance!
You should do a hard reset, don't have a HTC device myself but found this page which seems to help you with it http://www.flickr.com/photos/ryjones/2193904710/
to follow those steps the device should be activated.. Mine cant load windows
btw thx for posting
The guide says only "power on", it doesn't require you to load Windows. I understood your device does power on, it just can't boot Windows.
yesterday I installed an input method and my touch pro can not bootup it stuck at loading touchflo...
I can open start menu, but I can not run any application from there.
Also, I can not connect my mobile with computer. my computer do detected my phone when it is starting, but then it just lost connection.
But I have very important SMS from my boss~~
How can I dump sms from my phone?
is there any software on pc can help dump sms from the phone in that red,green,blue and white screen?
anybody can help me, please~~