Related
Just installed and used Tom Tom 3 for my xda, amazing bit of kit. One problem though, if I am navigating around in my car and someone calls me, I answer it and then hang up when finished and the xda says that Tom Tom is running in the header bar but does not show it. Hard restart is the only way back.
Anyone come accross this???
Are you using bluetooth?
The easiest way that I find is to configure one of the hardware buttons (Start | Settings - Buttons) to launch TomTom, i.e. the Contacts Button.
Then when you have finished taking a call simply tap the Contacts button to bring TomTom to the foreground.
This is where mamaich's phone extension comes in handy.
He not only offers a contacts interface from within the phone app that can be accesed with the finger, but also the red hangup button can 'close' the phone app (in call: first button press ends call, second button press 'end' phone app).
Normally then TTN3 come to the foreground again and start talking again.
(I have BT)
cruisin-thru said:
Are you using bluetooth?
Click to expand...
Click to collapse
Yes it is the TomTom Bluetooth device, amazing, no connection issues or dropping satalite yet.
Thanks for the advice on the other matter will give it a go.
Well just used it for a couple of hours switching between TomTom and the phone, perfect,,,,,how strange.
It did however lock up mid navigation, bugger
about the lockup: If your maps are on sd card, try to disable all POI.
9-to-1 that it wont lock up again.
has to do with the limited data-transfer rate of many SD cards.
edsub said:
about the lockup: If your maps are on sd card, try to disable all POI.
9-to-1 that it wont lock up again.
has to do with the limited data-transfer rate of many SD cards.
Click to expand...
Click to collapse
Will give it ago, all I have on is the fuel stations. Any way in telling what version of TOMTOM I am running, I have just updated it to 3.03 or 3.04 but would like comfirmation that it has done it.
Switch to 'Map' View and click 'File | About' and you will see the current version information.
I noticed the lock-ups (and so have others referring to a certain thread on pocketgps.co.uk) in 3.03
It doesnt matter how many POI categories are 'on'. Just having the file open was enough for my installation to make it lock-up.
Work-around is to disable POI
Solution is buy faster sd card
Used it all weekend, PIO's on, no lock ups. The problem with answering a call and not being able to go back to Tom Tom is due to the fact that after the caller hangs up, the phone app will not shut down. Have used one of the freeware menu/task manager apps, gets round it.
Then the issue for sure is not with your sd card (lucky you!).
Could it be that the gsm was very busy at the time of the lockup (blind spot, getting out of flight mode) These actions can also make your TomTom freeze
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
mgumbs said:
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
Click to expand...
Click to collapse
I dont think that the people here see it as a problem like you and myself I started a thread weeks ago
http://forum.xda-developers.com/showthread.php?t=507358
1300 views but still no solution, its prob too hard to do Dammm HTC
Martyn
Ps if you find a solution please let me know
I also experienced a problem with switching screens when turning the device back on. Uninstalling TouchLockPro solved the problem for me...
@Brempie
I took your comment about uninstalling TouchLockPro. I didnt have that program installed but i took the PIN lock off my phone temporarily, and hey presto, phone works as it should!
So now we know what causes the problem, hopefully HTC will have a fix for it....eventually.
I'll live with the bug for the moment, i prefer a phone which is PIN locked.
Cheers,
M
I have never had this happen to me. I also installed throttle lock and it always goes back to where it was when I unlock. I just uninstalled throttle lock and did a soft reset to test and make sure it never reverted back to the home screen. Nothing.
No matter what program I am in it wakes up to that same spot. I don't know what the registry hack for this is but there probably is one.
Could you possibly try this? Install ThrotleLock v0.6 and then see if it will work. If it wakes back up to the same screen and not TF3D uninstall it and see if it goes back to TF3D or not.
*warming up this thread*
So, has anyone yet found a solution for this?
It's annoying for me as i have set the device to go to standby after 2 minutes of inactivity when on battery. When i listen to music with the musicplayer in foreground, or when i write an email and someone interrupts me, i put the device in standby by myself or it does automatically after the defined time.
In 95-99%, when i turn back on the device, it has returned back to the touchflo home screen. Very rarely, and it could not yet find any system, the device wakes up exactly where i left it. This is, what it should do everytime but sadly it doesn't.
I'm using the Stock-ROM, activated PIN-Lock of my SIM, having a (WinMobile default) device Lock (4-digits) set to activate after 24 hours (this way it does not activate itself during normal usage, unless i long-press the end-call-button), using 2ndToday with SPB Diary.
It gets more annoying for me every day, because especially during working time i frequently turn the device on and off. Reading RSS-news, turning the device off for an incoming call, turning the device on just to get welcomed by the home-screen instead of staying on the news i previously read isn't that comfortable
Having to open the taskmanager and reactivating the program means at least two more clicks everytime i use the device... so - any solution?
edit: I think i tracked down the source of the problem, watch in this thread:
http://forum.xda-developers.com/showpost.php?p=4366357&postcount=14
Every time I install G-Alarm on my phone, TouchFlo seems to get disabled.
It is still enabled in the settings menu, but the home screen is just a HTC wallpaper, and when I press the windows key the start menu is opened.
I have tried rebooting multiple times, but nothing seems to help...
Only removing the application has worked so far for me
Any ideas?
EDIT: I'm having the same problem with G-Profile!
It seems that the programs just disables the TF service from launching/running...
Haven't experienced that problem myself, using G-Alarm v1.5.1 here.
Hmm.. Strange.
I have heard more people say the are using some of the "G-programs" on the Touch Pro 2. So it must be something in the ROM I guess.
I am using an unbranded Dutch version. But I have no clue on how to fix this...
Ok. I have figured out that if I remove the PIN entry screen from the start up sequence (so no PIN has to be entered anymore) G-Profiles works. I haven't tried the others yet, but I'm sure they'll work as well.
The thing is... I would like my phone to have a bit of protection by the PIN code
I don't use G-alarm on my Dutch TP2. But I have this issue with not starting TouchFlo3D also. On HTC advise I resetted the device. Then it worked for abou 4 hours and after that it wouldn't start anymore. The screen staus black with the fancy HTC in the sceen... but no "starting touchflo".
Als for that reason I instaled SPB mobile shell latest... but this will not update new SMS or Mails in the main screen... more people on SPBCLUB have this issue... I think it has something to do with the TP2 and not with SPB... more people with same problems?
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
I don't think this problem is just with G-applications, I am having the same problem withouth any g-apps installed. After a few reboots it usually works again, but I think this is a more genereal TP2 issue.
michaelra said:
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
Click to expand...
Click to collapse
I've asked on his forum, and he said it probably was a TouchFLO bug...
Thread here: http://forum.ageye.de/viewtopic.php?f=22&t=721&start=0
(I'm BiT on there...)
I've had the exact same issue but found out that with me it wasn't linked to G-Alarm but to the 'Background4AllTabs' plugin,
I've hard reset tons of times, tried several alternate installs, but once I start changing TF3D options like th background or clocks, it slows down tremendously in screen rotation and it often won't start after reboot...
hmm i dont know if you still have these problems but a few days ago i figured out a solution^^
The problem is the entry. I've got an htc touch pro 2.
Soo to get TF3D starting try fallowing thing:
-Go to "Settings-->Connections" and turn ON the flightmode (this will disconnect all)
-Then restart your phone... wait a few seconds and TADAAA TF3D SHOULD start.
-Go to "Settings-->Connections" turn OFF the flightmode
-Enter your PIN
-Now your phone should connect to your provider.
So if this work you have to do this every time you restart your phone... so turn on flightmode --> restart--> turn off flightmode
I hope this way is not only working on my phone
btw sorry about my english xD
GreeZ $me
Flightmode works for me
Indeed it works now. But I have another interesting thing.
I was used of waiting nicely looking at the PIN input screen. Wait, lets say,. 20 seconds; cancel the pin input and see the Touchflow coming up in 100% of the cases. So I could live with the problem.
Now I installed Navigon who puts a file in the autorun folder. And now Touchflow never starts up any more with the exception of the Flightmode trick.
Is navigon guilty?
i never used G-Alarm but i have the same problem.
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile
I don't know if this is really just a "screen lock with disabled bits" or if this is some full-blown idle mode, but I was wondering...
I don't have any car-accessories, but I'd still like to use TomTom. Now, TT offers some nice voice guidance, which is more than enough for just getting around (if I ever get really lost, I can pull over and pick the thing out of my pocket).
However, leaving TT running in my pocket means that the screen is on, the display changes and thus battery will be drained considerably faster than if the thing would be locked... not to mention an accidental press of a button (it's in my pocket, after all).
However, locking the phone turns the GPS off, so even if I leave TT running in the background it does me no good.
Is there anything I could try out in such a case?
So... this is impossible? :/
Nothing specially made for that has been released that I know of.
But from info I could gather around, RunGPS has the capability to be set to turn off the display leaving the GPS running.
So you could just install rungps as well, set it to turn off the display with GPS on, and at the same time also run your fav GPS app, tomtom in this case.
What should happen is that the screen will go off with the GPS still working (thanks to rungps) and tomtom will run in background being now able to access the gps device (still thanks to rungps).
Still worse for battery than having only the useful app running (as rungps will take some cpu cycles for itself and will cause more load on the device) but should still be better than leaving the display on at all times.
Let us know your results.
hey what do you know, 900th post
Hmmm... strange... Last I've noticed my GPS kept runnung while the device was locked. I used NaviComputer to track a walk I did with a friend and had my HD2 locked in my pocket most of the time.
ThoroSOE said:
Hmmm... strange... Last I've noticed my GPS kept runnung while the device was locked. I used NaviComputer to track a walk I did with a friend and had my HD2 locked in my pocket most of the time.
Click to expand...
Click to collapse
uhm, don't let that fool you.
First times I used navicomputer just for fun, I thought gps was running in background, but only later I realized that the GPS signal was restored right after turning on the display, and navicomputer was showing a straight line going from my latest positiotn before turning off the display, to the first positiotn it got after wakeup... and I'm sure of that since I double checked several times
In case you check and you DO have your GPS on at all times with device in standby using navicomputer, please let me know the list of installed programs you have (I doubt it tho)
jan-willem3 said:
Change this with your registery
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Unattended]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"gps0:"=dword:00000001
"gpd0:"=dword:00000001
Normaly the numbers are on "4" - put this on "1" and gps should stay awake even when you put the phone in standby.
It will stay on until a program stops using the gps.
Click to expand...
Click to collapse
Bib_x said:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\State\Unattended]
"gps0:"=dword:00000001
This was already "0". I changed it to "1", too.
Click to expand...
Click to collapse
Try this. It works on my HD2. I use Run.GPS to log my tracks while jogging or mountain biking.
Other way to keep gps-fix while screen is off - you have to do only a "screen off", not "standby". I did it with AEButtons+ (e.g. screen off on long-press green call-button) - but with this reg-changes it works better for me.
Or you can only lock your phone and let it go to standby on its own. Then gps-fix will still keep alive. GPS-fix only gets lost if you press hardware-power-button (red end call button) - and registry not changed like above.
Bib_x said:
Try this. It works on my HD2. I use Run.GPS to log my tracks while jogging or mountain biking.
Other way to keep gps-fix while screen is off - you have to do only a "screen off", not "standby". I did it with AEButtons+ (e.g. screen off on long-press green call-button) - but with this reg-changes it works better for me.
Or you can only lock your phone and let it go to standby on its own. Then gps-fix will still keep alive. GPS-fix only gets lost if you press hardware-power-button (red end call button) - and registry not changed like above.
Click to expand...
Click to collapse
Awesome, thanks!
I'll try it out tomorrow. A bit too late to go for a walk now.
Bib_x said:
Try this. It works on my HD2. I use Run.GPS to log my tracks while jogging or mountain biking.
Other way to keep gps-fix while screen is off - you have to do only a "screen off", not "standby". I did it with AEButtons+ (e.g. screen off on long-press green call-button) - but with this reg-changes it works better for me.
Or you can only lock your phone and let it go to standby on its own. Then gps-fix will still keep alive. GPS-fix only gets lost if you press hardware-power-button (red end call button) - and registry not changed like above.
Click to expand...
Click to collapse
as far as I know rungps is able to use the gps during screenoff as a feature.
I tried locking the device without pressing endbutton, but navicomputer loses the fix no matter what.
I also noticed thos reg patchesin some other thread but I also read there that other users tried them with no avail; did you test those registry fixes with software other than rungps by any chance?
Without these reg-changes i tested RunGPS and when i press hardware-power-button - GPS-fix was getting lost.
If i only did a screen off - then GPS-fix was still there.
Now with these reg-changes i can press hardware-power-button during running RunGPS and GPS-fix is still there.
I did only test with RunGPS because that is the only GPS-app i want to use while screen is off/device in standby.
If i use a navigation software (iGo8), then i want to have screen always on- so i didn´t test this scenario.
Bib_x said:
I did only test with RunGPS because that is the only GPS-app i want to use while screen is off/device in standby.
If i use a navigation software (iGo8), then i want to have screen always on- so i didn´t test this scenario.
Click to expand...
Click to collapse
I see, thank you, let's wait for the OP to test this himself.
Since I already knew rungps has a feature to turn off screen without losing gps signal, I don't think it's the reg settings, but rather it's rungps itself that allows you to do that; since you couldn't test different apps we don't even have a verification
I may try to get at it tomorrow, no guarantee I'll have the time tho
I´ve installed sportypal, too. Maybe i can make some tests this weekend.
Bib_x said:
I´ve installed sportypal, too. Maybe i can make some tests this weekend.
Click to expand...
Click to collapse
us wants tests with navicomputer
No really, navicomputer is cool anyway, so install that too since you're at it
All right! I'm back with some results. Now, a quick note: I switched to MapaMap, a Polish map application, as it has a lot better maps for Poland.
I performed two tests: firstly, I started a route around the street and used the softftware lock to lock the screen. Result? MM application kept running and kept talking to me. Nice. However, this is still vulnerable to the physical button being pressed and locking the phone; when that happens, MM looses GPS and, in fact, I think the system somehow pauses this applicaiton altogether (more on that in the next bit).
So, since the physical button is still possibly a problem (after all, during driving the phone is in my pocket, and it's not really difficult for that button to be pressed), I tweaked the registry as Bib_x suggested. However, it seems that even IF the GPS module was still running, the MM application enters this weird suspended state, and whenever I resumed it, it would always greet me with a "searching for GPS signal" message. Granted, it would find the signal very quickly, but it still didn't work while the screen was off.
The odd thing is that mode the application went into. Normally, when it's minimised, I can pick it from the task-switcher and bingo! It's instantly back up. But when I press the hardware lock button and then unlock the phone, I get the Windows "please wait, I'm working" wheel in the centre for a while, before the app is restored.
I can check with TT again to see if the problem is restricted to only MM, but something tells me it's not an isolated case. So now I'd need to figure out a way to keep MM working when the phone is locked; kind of like the music player.
EDIT: TomTom resumes a lot faster, but it still looses GPS; right after resuming it says "no GPS device", and that's with the registry changes applied and after restarting the phone.
Shaamaan said:
EDIT: TomTom resumes a lot faster, but it still looses GPS; right after resuming it says "no GPS device", and that's with the registry changes applied and after restarting the phone.
Click to expand...
Click to collapse
exactly my experience with any other gps software.
Didn't even try the reg tweaks as I didn't trust them that much.
Just try installing rungps as per my suggestion and using that at the same time with your fav navigation software, maybe the fact that rungps keeps the gps subsystem working while screen is off makes also the other app do its job.
After some more fooling around, I've made it, albeit I fear this method might be limited to MapaMap only.
When installing MM there are two options: either installing onto the HD2 or directly onto the MicroSD card. The former option will always install something called "wake up plugin" (might be worded differently in English) which doesn't show up in the "remove applications" menu, so it's more of an integral part of MM and probably can't be removed in this case. In the latter option, this plugin won't be installed, and in fact, is unavailable.
Initially, I've installed the app directly onto the phone, so that plugin was included automatically. My guess is that THIS was the bit responsible for putting the app into some sort of "sleep" state. However, when I installed the app onto the SD card without the plugin, I could lock the phone using the end-call button and the app wouldn't shut itself down like that; it even kept talking to me during the ride, so everything worked. Once more, I can confirm: THE SYSTEM KEPT ON WORKING DESPITE BEING LOCKED - I drove quite a distance and took some different turns, and the phone kept nicely informing me of the new distance and of upcoming turns.
This was all done using the registry settings suggested in this thread! Without them, the app will loose GPS data when the phone is locked, and if I set it to record my movements, it'll create a straight line between the start and end point, with a "no GPS signal" in the middle
EDIT: Do the registry values 1 and 4 mean "always on" and "always off"? What about values 2 and 3? I'm assuming there's no way to make the GPS module "smart", so that it's turned on only when needed? Or is it possible to add a manual switch for the GPS module to the Comm Manager?
GPS will only be on if a program sends this comand. And if you end the program, then this program sends a kill-comand to gps.
Have you tried with Pocketshield screen lock?
There is a setting at Locking > "Except when...", there you add exceptions to applications which will be allowed to continue running with the screen turned off.
The reg edits work for me with GPS Tuner and google maps, not with iGO8. I had actually tried that myself, but only the ones in "unattended" and set to 0 instead of 1 (as that's the fix that's used to keep music playing in Coreplayer and that works), but apparently it wasn't enough for the GPS. Good news
I have a big problem,it happens once a day(it happend before MR1,with MR1,and with MR2). Cant unlock the screen,when I need to drag padlock left or right it just cant,padlock stays on the left or right side, I can get it back to the middle but unlock - NO (sometimes it promts for some ''unlock code'' but it is not usuall lock code,one REFERENCE it is NOT set to use a screen lock code). Only soft reset helps. Somebody have something to say???
hi
this is a strange thing you said, and i can't imagine what are you saying.
but try to set a unlock code and set the setting not to ask the code.
i can't tell the step by step cause i'm updating the MR2 right now.
I had similar problem after upgrading my X2 to MR1. It used to happen frequently.
Yesterday evening I upgraded my X2 to MR2, since then I have encoutered the same problem once.
Any solution?
that problem makes me very.........i cant use basic functions like answering the call when it happens. and that was happening to me also before i installed mr1and now with mr2.
I solved problem when set the device to promt for a pass when unlock,but when i turn off that option problem comes back. I must use my phone with that option turned ON or it will freeze every day.
Ah had this all the time initially, after MR1 it never happened at all.
In about a couple weeks of MR2 usage, it happened once. Hasn't happened again, but ever since then my sms alerts randomly become silent.
Guess MR2 is still quite buggy. I'm about to jump ship.
I've had a lock bug on the MR1 a lot but with MR2 i've only had it once (where it would tell me that my pass was invalid when it wasn't). A quick reboot of the phone and it hasn't happen again (thankfully).
Maybe every once in a while (every 1-2 weeks) give your phone a full reboot (pop out the battery, put it back and turn the phone on). Maybe that will keep you from getting it as frequently (maybe).
guys,
do you use Autolock activated mode when you see unexpected password to unlock prompt or when you can't unlock unit by moving bubble on the screen?
I sow this issue a lot of times - but it's interesting that I never sow this issue when unit is in autolock and in sleep mode, I receive input call and I see bubbles like Answer or Skip but I always can unlock my unit and answer or skip Call. Do you know anything about similar issues for other WinMob products?
fila87 said:
I have a big problem,it happens once a day(it happend before MR1,with MR1,and with MR2). Cant unlock the screen,when I need to drag padlock left or right it just cant,padlock stays on the left or right side, I can get it back to the middle but unlock - NO (sometimes it promts for some ''unlock code'' but it is not usuall lock code,one REFERENCE it is NOT set to use a screen lock code). Only soft reset helps. Somebody have something to say???
Click to expand...
Click to collapse
Hello I have face the same problem and still I am facing after the firmware upgrade using the sony ericssion update service.
Phone ring tone selection problem
I have another issue with the X2 Sony Ericssion. I select the ring tone called "Adventure" after some time phone automatically changes the ring tone to window default which is Ring01-WindowsPhone.
Please advise how to fix this issue
that's beacouse your sdcard enters standby,put the sdfix cab and youll be ok
mrqro said:
that's beacouse your sdcard enters standby,put the sdfix cab and youll be ok
Click to expand...
Click to collapse
Can you link me to sdfix cab?