Full size not recognize? - 8125, K-JAM, P4300, MDA Vario General

I have a 2gb sandisk minisd for my tmobile mda and the system only recognizes 1 gb. What could be the problem?

Sorry to hear your misfortune. Did you just get this card? Did you get it from eBay? Have you read it from anything other than the phone? A 2gb card should work just fine, but some card problems have definitely been reported before...
Your chip could be a fake 2g card. If it reads short of memory on your PC as well as the phone, then this is likely the problem.
It may also be a multiple-layer card, which historically have problems when being read by Wizards/MDAs. If the card reads fine on your computer, but reads short on your phone, this may be the problem. Check this thread and you may get confirmation from others.
If you have had it for a while and are experiencing this as a new problem, you might just have it poorly seated. Try ejecting and reinstalling the card with the phone turned all the way off (Press and hold power until prompted, then click "Yes"). If that doesn't fix it, test it on your computer with a card reader to verify formatting and files are still present (i.e. it hasn't been wiped out by some error).

It came with my phone which I bought off of ebay. I'm guessing is a fake too since I tested on my friend's phone and it still showed 973 megabyte total. It's a damn good fake too since it came with everything a genuine does.

All they really have to do is re-label the chip, stuff it in the wrong package...so not too surprising. Test it on a computer before passing final judgment.
Try to get a partial refund from the seller, and when that fails, and it probably will, for the love of all that is good, REPORT THOSE BASTARDS.

Should I just keep on using the fake card or replace it? Will it potentially damage my phone?

It is safe. As long as you are not put out by having less storage, go for it, but you really should pursue action against the seller for fraud/misrepresentation, or eBay will just keep letting them sell bogus goods.

Related

Micro SD not recognised on insertion!!!

Hi All,
Wonder if this is common or should I return the unit now. Had my Dopod 838 Pro for a week now. Great phone/PDA but since new, it does not always recognise a Micro SD card at first insertion. Tried 1x512 Sandisk and 2x1gb Ultra II cards with same issue. Phone has latest ROM from factory, 1.03.707.4. The insertion seems "clunky" too, that is, it doesn't go in smoothly like regular SD and Mini SD devices I have got.
What I have noticed is that if I only insert just enough to lock the card in it seems okay, but if I push it firmly home, it is more likely to remain unrecognised.
In every case, once recognised, it runs, saves, reads from the card flawlessly so it does seem like this is a hardware issue. But if all the Hermes phones are similar, it may be just one of those characteristics of the phone and nothing too much to worry about. Just like to know so I can relax or act as the case may be.
Thanks for any feedback guys...
John
Yes, I have found a similar issue. If I remove and re-insert the card a few times it eventually gets noticed.
It's the only glitch I have had on the device after 3 flawless months
MarkD said:
Yes, I have found a similar issue. If I remove and re-insert the card a few times it eventually gets noticed.
It's the only glitch I have had on the device after 3 flawless months
Click to expand...
Click to collapse
Quite a few seem to take a few goes before recognised but usually seem to work fine once recognised.
Might be a bit concerned about jpfe8851's clunky slot and if it seems to go past the normal stopping point - Have not seen reports about this and mine does not do this.
Mike
I've noticed that it works everytime for me if I insert the card with the device turned off.
Martin
If you use your camera application to save the pictures on a memorycard, try to run the camera after inserting the card if it doesn't detect it. The camera app. then informs you that there's a new memcard inserted and do you wanna use it to save the files on.
Not so much of an hasle, considering how often you really remove/insert memory cards and the hermes has the camera button just opposite to card slot. And the application doesn't stay on the process list if you close it from the X (cross on upper right corner). The OK button doesn't completely close the application.
Inc said:
I've noticed that it works everytime for me if I insert the card with the device turned off.
Martin
Click to expand...
Click to collapse
Same with me I turn it off to remove and then turn it off to insert and it will pick up the card
y2whisper said:
Same with me I turn it off to remove and then turn it off to insert and it will pick up the card
Click to expand...
Click to collapse
This sounds like good practice and I'm sure for most folks this works. I think though there some people that struggle to get Hermes to recognise the card even when inserting it when off. Generally it does recognise it in the end but there could be a few reasons for these issues (formatting, fragmentation, poor physical contact and so on).
I think your advice is good though and should become routine whenever the card is removed/inserted.
Mike
I've used a 1GB PQI, a 2GB normal Sandisk, and a 2GB Sandisk Ultra, and all have worked fine. Except one of the 2GB doesn't like my card reader
i found formatting the card help. Originally it would only be detected if the phone was turned off.
Unfortunately I didn't have a card reader, so used an adapter to format it in my digital camera and have no idea how it formatted it. But it now works everytime without fail!
Thanks Guys...
Sounds like this is fairly common. I've found even since I posted the original question, that provided I just push the card until it clicks, it starts up every time. With my old Axim x50v and Atom, I had to really push the SD cards as far as possible to engage the lock whereas the Dopod clicks just after the edge of the card is past flush. Gently does it seems the rule.
Mike, I appreciate your concern but the clunkiness I think is more related to the card design, having the bumps along one side, than the slot. Also, these things are all rated as hot swappable, so we should all not have to turn off just to change a card. I don't change cards that often, but when I travel, I swap cards a bit as I take a couple cards with music on to listen to while flying.
For all with the issue, I suggest you do as I said in the first paragraph as that seems to be the clue, just press the card until you feel it engage the lock and see what happens.
Thanks all for your feedback. I'll carry on without a visit to service as the phone is terrific and the keyboard (my reason to replace the Atom) is superb.
Best regards,
John
*Solution*
I've also had the same problem, but I think I've figured it out and it's a hardware issue.
If you don't pay attention to how you put the card in, it will go in "crooked". The problem is that the little notch on the side of the microSD won't activate the switch inside the phone that tells it that "the card is in".
The solution is to watch very closely how the card goes in. If you make sure that the side of the microSD card with the notch, goes in straight and flush with the side of the slot, it will recognize it every time.
i've done all the suggestions given on this topic but i still can't get my JasJam, which is about 13hours old, to recognice my microSD card. I've tried a 512mb and a 1gb and no luck... i'm leaving tomorrow and i'm worried if the service center will want to repair it rather than exchange it.
hi fone_fanatic,
if its a fault with the jasjam, you will receive a replacement if its under 30 days old. but the replacement procedure sucks.
Are you in Australia and a Telstra customer? If so, telstra calls imate support to obtain a service reference number, then they will send your pda to mobile phone solutions (MPS) in QLD, they will inspect it and then return a new jasjam to your retail outlet. once the retail outlet receives it they will give you a call to come and collect it.
the warranty is Imate, not telstra, so once it leaves their stores, imate are the ones who do the replacement through Mobile Phone Solutions.
Turn around time, 1 week for my replacement to be couriered to QLD from Melbourne, 5 days turn around time from MPS, 4 days for the new replacement to be couriered back to melbourne, 1 day for me to pick it up. so around 3 weeks.
Now, MPS is closed from Dec 22 to Jan 3 and they are out of JASJAMS, they are awaiting more from imate for warranty replacements (my friend is wating for his replacement) so turn around time could be longer.
life sucks sometimes......
Thanks for that info Jasjamming. I'm in saudi arabia visiting family and friends for the holidays, and the process you just described soounds very similar to the one that was described to me today. BUT... turns out the device is fine, the cards i tried were both Nokia MicroSD cards that came with nokia phones and for some reason the jasjam won't read them. So i bought a 1gig Sandisk and it works fine!
Im having the same issue with my Hermes and a Sandisk 2gb card. It worked fine for a few weeks, but now wont detect at all. Interestingly the screen comes on when the card is inserted or removed - I'll test the card in a reader to see what shows...
A soft reset always seems to work for me
aprmike said:
Im having the same issue with my Hermes and a Sandisk 2gb card. It worked fine for a few weeks, but now wont detect at all. Interestingly the screen comes on when the card is inserted or removed - I'll test the card in a reader to see what shows...
Click to expand...
Click to collapse
There's a thread here http://forum.xda-developers.com/showthread.php?t=294324 which gives some fixes to this problem. The thread is a bit long so it may be best to read from the end backwards.
Also, I believe this problem has been taken care of in the cooked WM6 roms. My SD card hasn't disappeared since upgrading to WM6, but did all the time when with Vodafones UK rom.
broken microSD card?
I have a Sandisk 2GB microSD card, that after a few days stopped working. Whenever I insert it, the device hangs completely. It doesn't matter whether I had turned off the device before inserting. The device stays unresponsive when I eject the card again, I always have to do a soft reset to bring the device back to live. I tried to insert the card carefully (as someone here mentioned the issue with the little notch), but it doesn't make any difference. The card is never recognized, not even after a soft reset. This is obviously very frustrating, as I had just installed a couple of useful apps on the card.
Do I need a new card or is there anything else I could try? ( I do not have a card reader....)
ROM: 1.23.78.3
ROM date: 08/01/06
Radio: 1.06.00.00
it must be the sandisk 2GB microSD cards as i have one to worked great for a week, then stopped working....i formated using the pc and now it is recognized as a 1 GB card, in both phone and pc..
QuachMD said:
I've also had the same problem, but I think I've figured it out and it's a hardware issue.
If you don't pay attention to how you put the card in, it will go in "crooked". The problem is that the little notch on the side of the microSD won't activate the switch inside the phone that tells it that "the card is in".
The solution is to watch very closely how the card goes in. If you make sure that the side of the microSD card with the notch, goes in straight and flush with the side of the slot, it will recognize it every time.
Click to expand...
Click to collapse
Quoted for truth.

[Q] SD Card for newbies

Hi, I recently purchased a Dell Venue Pro and I am going to get it some time this weekend. The main concern I have with this phone is the small amount of storage. 8gb is simply not enough for me. Perhaps I missed something, but I've been reading through this forum and haven't found a very good explanation for newbies on how to replace the SD Card. I have actually seen some posts that say that they managed to exchange their 8gb SD Card for a Sandisk 32GB micro SD card Class 2. However, I would like to have some guidance and instruction from someone experienced doing this; I wouldn't want a bricked Dell Venue Pro.
Therefore, could anyone please instruct me with a step by step guide on how to replace my SD card without crashing my system and which sd cards are compatible? Thank you.
Believe me when I tell you this will not work. What you will end up with is a bricked phone that needs to be replaced.
If you have a device that was shipped between December and now you don't have an engineering sample, those are the only devices that can actually format the sd card to the proper filesystem and lock the card down in way you'd expect it to.
If you'd like to test that theory, simply replace the card while it's off. Perform a hard reset on the device (the CAM + VOL DN combination does not work), shut it down and put the card back in an SD reader. It won't be formatted and won't be locked down.
You might be able to format the card on a Windows CE machine with storage manager, but the most I've been able to do is get the SD card test to show a 114 not ok instead of a 115 not ok.
After that, if you're lucky, you'll be able to simply throw the old card back in the device and proceed with enjoying your phone with the original SD card. If you're unlucky your phone will not boot.
Food for thought:
In the diagnostics application there is a button for "Service Center" which displays two boxes: Zune and Composite.
When you press the CAM key during boot this puts the device into a "restore" mode that Zune is supposed to work with at some point in the future.
I'm guessing if we can figure out a way to flip the mode to Composite (currently requires a password) that the "test/debug" bootloader will allow us to format the cards properly.
It's also entirely possible that the reason the engineering samples work and the retail devices don't is that the eng samples are in this mode already.
Wow thanks a lot for the very thorough answer. Do you think we will see memory expansion as a possibility in the near future?
Ok, without trying to insult anyone, 'm gonna call Bullshxt. I now have 3 VP's in my possession. Ok....1 I dropped and it doesn't start any more. But that still leaves 2. On both of them I have removed the SD card, replaced hte card with bigger and smaller SD cards and have even left the SD card slot empty. I have NEVER bricked my phone.
Let's leave performance behind first...and not consider it. Lets just talk about changing cards.
The key to changing cards is process. Take the card out and restart your device, it won't boot. there is no external keys for hard reset. Place that same card back in your device, it will start.
To change out a card, do this:
1. Hard reset your device
2. On the reboot portion, remove the battery and then remove the card
3. Put the battery back in and let the device start up
4. Walk through startup and your phone is ready to use.
Keep this same process each time. You cannot remove a card, without first going through the hard reset process. You cannot add a card with out first going through the hard reset process. The hard reset process initializes the card to the device.
I've done this at least a dozen times, with cards ranging from 2,4, 8 and 16g. I've done it with cards pulled out of Google phones and an HD2. I've done it with cards that have never been used before. Its 1, 2, 3, 4. No matter what combination of removal and add....1,2, 3, 4. Remove a card, its 1,2 ,3, 4. Add a card, 1,2,3,4. Simple.
Now...if you want to talk about Performance....thats another conversation....
Again....no insult intended with the BS call.
Sorry...forgot to add 1 thing.....this has been described on this forum several weeks ago...so...what I'm saying is not a huge discovery from me...but rather from the guy that posted this around christmas.....I just repeated it is all !!!
Oh OK, sweet thanks for the thorough step by step guide! This is exactly what I needed.
A few questions though.
On step 2. you mention a reboot portion. What does that mean? After hard resetting what is my "queue" to remomving my battery and SD Card
Also, you never state in the 4 step process when exactly I put my alternative SD Card in. Would I put it in step 3 when I put my battery in?
Finally, you say Performance is a different story. Are you saying that replacing SD Cards will make the phone slower or more prone to crashing or working less stably?
Thank you.
I think once the phone is ready to use again, you then start the process over again at Step 1, except instead of removing the SD card in Step 2, you put the new one in.
What I want to know is, if taking out the provided SD card voids the warranty, how do you get a new phone without paying for it? Or does the warranty not cover that specification?
none taken, but your claim about the device not booting if you remove the card is false.
It will boot, sans card, with ~15mb of free storage space with no customizations. It's also likely though that if your device does boot into this state, you will never be able to get another SD card to work in it ever again.
Even if it boots into the "no storage" state it's still possible to put in the old card (in most cases) and have it work. I'm just saying that has not been the case for everyone.
Looks like I've found quite a good amount of posts from people stating that they have swapped SD cards succcessfully so might try this if I feel like I require more storage. Would anyone happen to know if there are certain types of SD Cards I should use to make this work? Also, alodar1, you have stated something about performance being another story? Would I be sacrificing performance by swapping cards? What kinds of issues would I be having?
1) Open settings-> about menu in phone
2) Press "reset"
3) Press "yes" twice. The phone will start to reboot.
4) Wait until the phone shuts down and begins to reboot, and take the battery out. NOTE: If you take out the battery too early, it will not work correctly. I waited until I first saw the Dell logo pop up and then pulled the battery, and that worked.
5) Remove the old SD card (I used a very small eyeglass screwdriver to gently pry it out since it isn't spring loaded)
6) Put in new card, replace battery, restart phone
7) Go through the setup process
That should do it. My phone hasn't crashed since I replaced the card on Sunday, so its been a success for me. I have not had any performance issues with my new card - but I suppose that really depends on your card. Granted, I actually downgraded - I went to a Sandisk Class 4 8GB card. Soon enough I'll be getting a 32GB card and trying that one out.
Ah things are much clearer now thank you very much, will try this. I'll pray my phone doesn't go bad... gulp.
Also, are you saying you were a victim of the crashes and replacing the SD Card fixed it?
OK so I'm going to buy an SD Card, a 16gb, so should I go for a class 2 or class 4? What's the difference between the two and is any one of those two incompatible with the venue pro?
Erchino said:
Ah things are much clearer now thank you very much, will try this. I'll pray my phone doesn't go bad... gulp.
Also, are you saying you were a victim of the crashes and replacing the SD Card fixed it?
Click to expand...
Click to collapse
Yes - my phone crashed very frequently with the 16GB card. Many times a day. I've now gone a full week without a crash with the new card.
Erchino said:
OK so I'm going to buy an SD Card, a 16gb, so should I go for a class 2 or class 4? What's the difference between the two and is any one of those two incompatible with the venue pro?
Click to expand...
Click to collapse
Mine is class 4. The problem here is that there is no official specification. The class rating refers to data transfer speed - but the requirement for Windows Phone 7 is random access speed, which the card manufacturers don't advertise. Early reports actually showed that higher class (6+ cards) actually perform worse in WP7.
I don't have the DVP yet. Will the warranty be void when the SD card is replaced/removed? Thanks.
NeverSummer07 said:
I don't have the DVP yet. Will the warranty be void when the SD card is replaced/removed? Thanks.
Click to expand...
Click to collapse
Yes, the black tape shows "VOID" after you remove it. A prior warning would be nice, since the tape doesn't say that on the outside.
DeekoVB5 said:
Yes, the black tape shows "VOID" after you remove it. A prior warning would be nice, since the tape doesn't say that on the outside.
Click to expand...
Click to collapse
Does it really say "VOID"? I removed the tape but I can't discern any letters left on the device. However, I can see an "O" on the tape.
yep, it says VOID and the black VOID letters are left behind when you remove the sticker.
So for those who have replaced their cards, how is the phone holding up? Able to use wifi and the marketplace and IE with no crashes?
Erchino said:
Looks like I've found quite a good amount of posts from people stating that they have swapped SD cards succcessfully so might try this if I feel like I require more storage. Would anyone happen to know if there are certain types of SD Cards I should use to make this work? Also, alodar1, you have stated something about performance being another story? Would I be sacrificing performance by swapping cards? What kinds of issues would I be having?
Click to expand...
Click to collapse
sorry for the delay in replying. No, not necessarily. Personally I believe there is an issue with the specific cards Dell used. But what do I know for sure. I swapped to another 16g card...nothing fancy...just directly out of the HD2.....it worked and performance was better. A couple of friends of mine did a similar swap, looking at specific R/W speeds, class types, etc. They had mixed results. So, my guess is, there is something else that is a trigger that no one has hit on yet. I know my 16g performance is not as good as the 8g performance....in smoothness of card access. If I swap down to an 8g card...or even a 4g card....I can see the difference.....the performance is smoother.
Now, this doesn't say that those people with the 32g cards are NOT seeing that smoothness. I'm saying that I tried this as a test because I had cards laying around....and noticed a difference. The difference strongly indicates the shipped 16g cards are not what they should be. But, this does not mean the 32g cards on the market right now are the answer.
HELP !!!
I tried changing my 8GB SD card to a 16GB SD card. it booted up fine everything seemed ok, but when I restart the phone it loses all settings. So I put the original card back in, followed the same steps. Now my phone only sees 16 MEGABYTES of storage, I've tried multiple factory resets, after a reset it doesnt even go through the normal setup process. All it does is go back to the homescreen with only the normal tiles accept all the newsroom, tmobile family room and stuff isn't there either. If I pin an app to the start screen then restart the phone the pinned app is gone from the start up screen can someone PLEASE help, I'd be happy just to get it back to normal, with the original SD card in it

Internal SDCard not working

Hello all i have a really strange problem. My Trophy is 1 month old, today it restarted itself alone and gave me the message that my SD Card is not working right and i need to replace it. I hate HTC for not making the slot accesable.
Now it's very complex to use the warranty,because i am from Bulgaria, the phone is bought from Germany, from ebay and on and on ...
Is there a way to test if the problem is the actual SD Card. If i am sure of that i will replace the lame thing on my own. Do someone from you have / had a similar problem ?
Thanks all.
Well, you could remove the SD Card from the phone (as described on the forums) and format the SD Card with a Nokia Symbian phone (E71 or else) and then test the card in a cardreader in your pc.
To be honest; I would just replace the SD Card. It isn't so much work and the cards are relatively cheap. The only other option seems to be trying to claim your warranty - but that might be difficult as you mentioned.
If you are tech savy and confindent, just open it up and drop a new 32 GB card in there yourself. We got plenty of forums posts around here, with how to open it up or even what types of cards to purchase.
If not, even though it may be a pain with the warranty based on what you told us, just send it over to HTC.
I am confident and i know i can do it. It's not a problem to open an replace. I am a little bit concern about the actual problem. If , and it's not something impossible , the card is just dead, this will be good. It's a common thing SD cards to fail. But if i void the warranty and the actual problem is in the mainboard itself, this will be a problem.
Probably only HTC has the ability to run diagnostics and test out if its the SD card or something else... but you will only know once you open it up.
I feel for your decision mate, g'luck.
Have you tried performing a hard Reset?
(Hold both volume buttons and switch the phone on)
I sure did. The first time it helped for about 20 mins. Than the card was gone again. The bootloader is reporting it as a SanDisk 61mb class 0 at the moment.
So i will open the phone, the warranty thing is not going to happen. Way to complicated, sadly.
One thing to ask. Because in the card replacing thread in the forum, after you put the the new card you must hard reset from the phone settings - My phone is hard reseted at the moment but it wont boot without a proper card. So i cannot pass the Error message. Do you thing that this is not going to be a problem, as the phone needs to be set right after that screen? I thing a the new card wont be a problem if it's properly detected ?

[Q] SD card problem. Please help

Hi guys I registered just for help with this annoying problem. So I bought my Xperia Play on ebay and the guy said it was brand new. Anyway so I open it up pop my sim card in then I slide it open to try out some games. So I click on Bruce Lee then it tells me insert SD card so then I think to myself "did the guy take the SD card" so I end up opening the back cover and looking for the SD card slot and to my surprise it had an SD card in it.
An 8GB card so I didn't know what the problem is. So I went over to storage and tried to mount it, it then tells me "SD card is blank or has unsupported filesystem" so then I click on that to format it and it does nothing just brings a little loading thing then the same notification that it is blank.
I finally got my brother's phone and popped it in and formatted it through the pc through his phone and then popped it into mine and the same problem again. I'm at the end of my rope, I've contacted the seller but I'd really would like to be able to fix it myself and keep the phone.
Thanks for any help and sorry for the essay lol.
Since then I've tried using my brother's micro SD I've tried formating and everything I can think of. This is my last resort before looking for a place that might be able to fix it.
Not an expert here, but if you have tried multiple cards and they don't work, you could try a factory reset on the phone. If that does not work, sounds like a hardware issue, though someone else might know better.
Sent from my brain on channel 64!
That's what I'm thinking but I wanna see if someone has a fix or a trick before taking it in to be checked.
Do you have another card to try?
Mine was cracked and quit working. I got a new 16GB card anyway because 8 isn't enough for a gaming system. 16 isn't even enough but that was the biggest I could find under $100.
I didn’t want to spend just as much on a card as I did on the phone. Although I did spend $900+ for a 32GB iphone 3GS.
ncaissie said:
Do you have another card to try?
Mine was cracked and quit working. I got a new 16GB card anyway because 8 isn't enough for a gaming system. 16 isn't even enough but that was the biggest I could find under $100.
I didn’t want to spend just as much on a card as I did on the phone. Although I did spend $900+ for a 32GB iphone 3GS.
Click to expand...
Click to collapse
I tried like 3 cards. One that came with it, then I went out then bought a 4GB Sony card and then I resorted to trying out my brother's card that works in his samsung phone.
Then it is probably a hardware problem. See if you can get it fixed under warranty.
How long ago did you buy it? You have 20 days to file a claim through Paypal.
Try multiple microSD cards if you have any available to you. If the phone isn't mounting it properly, try formatting the SD card on your computer. Be sure to use defalt file system and the default allocation size.
One thing I noticed is that the SD card will not mount properly if the back cover is not put on securely. There are two small buttons that are depressed when the back cover is replaced, which tells the Play to keep the SD card mounted.
When I was hot swapping SD cards with the back cover off, the SD card did not remain mounted.
Good luck!

[Q] 32 gig card trouble

I have recently purchased a 32gb micro sd card. When I go to put new music on it, it shows from the pc side that it is loading on the external drive(g2 phone) and form the phone it says that it is on there. However when I disconnect the phone only the last album that I put on there stays and the music player will state that "this type of file cannot be played". I have formatted the card through the computer and to no avail, it acts the same.. I did format it on the Android and it worked, temporarily and could load music from my computer for a few days, then it stopped. I am clueless as to what is going on with it. p.s. I tried placing it in a card reader and it did the same, but i did not format it first that time. I seem to think the android is placing a bad file on it causing all these issues. (again I say this because when I format it through the phone it will work temorarilly) any help would be great, I really want toload my phone with music.
theradioinside said:
I have recently purchased a 32gb micro sd card. When I go to put new music on it, it shows from the pc side that it is loading on the external drive(g2 phone) and form the phone it says that it is on there. However when I disconnect the phone only the last album that I put on there stays and the music player will state that "this type of file cannot be played". I have formatted the card through the computer and to no avail, it acts the same.. I did format it on the Android and it worked, temporarily and could load music from my computer for a few days, then it stopped. I am clueless as to what is going on with it. p.s. I tried placing it in a card reader and it did the same, but i did not format it first that time. I seem to think the android is placing a bad file on it causing all these issues. (again I say this because when I format it through the phone it will work temorarilly) any help would be great, I really want toload my phone with music.
Click to expand...
Click to collapse
Put the same file on a known good SD card. If it stays, it's a bad card. Most of the time the company the card came from will replace it for free (like Wintec did with a bad card that couldn't handle an EXT4 partition).
It is not just one file, it can be multiple files, like I stated in the other thread (I apologize to do two on here, but I rarely have to ask for help, I am usually able to figure the problem out, but this one has got me) I have checked the card with h2test and it states that it does have 32 gigs on it but that the card is corrupt, I have formatted the quick way with sd formatter. What puzzles me is that at one time I was able to load more on it and now I cannot. I feel that there is a fix, I am just not finding it yet.(okay im testing while updating, if i uplug and replug the phone and place music on it, it will only keep the last folder, for instance i put nirvana nevermind on it, it will keep it, i then put a folder with two albums on it, say radiohead the bends and kid a, it will replace the last one , I am certain that space is not the issue, due to having placed less files on it the first time I restored the card agai)
Did you buy this card from ebay? A lot of counterfeit card on there. Cards that say they are 32gb but will only hold a quarter of that.
ostinq said:
Did you buy this card from ebay? A lot of counterfeit card on there. Cards that say they are 32gb but will only hold a quarter of that.
Click to expand...
Click to collapse
+1
Try writing zeros with dd to the card... but be careful, dd will destroy anything you point it at, without hesitation. This is a typical dd command:
$dd if=/dev/zero bs=1M count=32000 of=/dev/somepartition
Where did you buy it? Like others have mentioned, it sounds like a counterfeit or broken card.
what is dd, and how can i tell if it is fake, every program ive used to check it goes through 29gigs of partition
theradioinside said:
what is dd, and how can i tell if it is fake, every program ive used to check it goes through 29gigs of partition
Click to expand...
Click to collapse
DD is found in the terminal emulator on linux/unix systems. Be carefull, you can destroy everythign on a partition with it.
Also, you'll have to reformat afterwards ... the sdcard
theradioinside said:
what is dd, and how can i tell if it is fake, every program ive used to check it goes through 29gigs of partition
Click to expand...
Click to collapse
Lots of the counterfeits are tampered with to report the "alleged" GB capacity. Its not until you try to transfer the files, that you run into problems and realize you were taken.
Again, where did you buy the card???
I apologize for not having answered your question, I bought it on eBay, I have been given a refund though. Where should I look for one at instead?
I got mine on amazon for like 55 bucks a few weeks ago been working great. It was a class 4 adata with a little blue usb card reader.
okay i bought a sandisk from a trusted store and again same thing, i am lost
What trusted store?
newegg class 4
Yup, that's about the must trusted store there is!
Any luck with lower capacity cards working? I'd say maybe its just a defective card. But its weird to have a string of bad luck like this. Is it possible the SD card tray on your phone is damaged?
Do you have an after market battery? Just curious...
Sent from my T-Mobile G2 using XDA App
Also do you use the turn mass storage mode on/off option?
Sent from my T-Mobile G2 using XDA App

Categories

Resources