Hi all ,
Please any one help me to open my HTC P3600 as i put simple lock key on it , put i forgot it , How i can resolve this problem , i need data on my mobile.
Thanks
Do you mean a PIN when you switch the device on? If you can't remember it then you're stuffed, IIRC. Even ActiveSync won't backup or connect without a PIN.
Best get those little grey cells working to remember it Or Hard Reset and start again....
Related
Hi to all!
I`m new in this forum and ba world.
Last week purchased spv m2000 with wm2003se and simlock. After reading wiki I unlocked SIM, unhided an unlocked EXTRom , resized DOC and upgraded to latest radio rom and wm6 (thx Helmi for great job).
I did also some set up things in wm6, for example password (something like - "if device is unsed for 30 min. you must insert password") same as my PIN.
My battery after whole day of exploring new features and programs became week (10% - you may loss your data..., etc) and I decided to push power button and replace with another one. But I forget that other one is also week (5%). After soft reset and booting wm6 asked me for a password to unlock system - and I was surprised coz wm6 told that password is incorrect - apparently lost all my settings.
Hard reset and boot options helped with sweeping whole system. So I must now install again all programs and patches.
I don`t know if this is normal wm6 behaviour (I`ve read wm6 is data lost proof - this feater was major cause of upgradind) or I did something wrong with switching batteries.
Best regards
I do confirm this problem.
If unlock password was set,after you changed the battery,in the first boot the phone would be No radio,so you should reset it again.Then the problem came,all the password you typed was incorrect,you could not get into the desktop.
Even after you hv hard reset your phone.You will also need to clean the registry,that is incredible.
Can any one figure out it?
It is a serious problem.
Same problem
I have just the same problem that with my PDA2k. I upgraded to WM6 and put in a Phone Password. When I came to reboot the device and enter the password, it was not recognizing it ( tried to hard reset etc but still got stuck on the Password screen no matter what I do?
Any help on this pls pls?????
thanks
MercuryCube
Trinity P3600 have this problem too
Hello, I just got the same trouble on WM6 Trinity P3600 (AXL ROM from 2007-08-30). So possibly this is common DOPOD ROM bug?
Also have the same problem with XDA IIs. Tried to reload the new ROM but the enter password is still there. Any other solution?
Solution Found!
You find the solution here:
http://forum.xda-developers.com/showpost.php?p=1164331
)
Thanks it worked perfectly
100 points !!!!
this is called hard reset it wipes all of your installed software and settings. it is like freshly installed windows
Dear Xplode , what on earth is the reason behind the blocked password and reseted clock if u remove the battery ? ( backup batter working ). Another question , any idea if i can use a 3rd party application replacement for the Lock application ?
Karim.
prophet upgraded with wm6 hv this problem too
One easy tip
Before you replace the battery, turn off security lock on device. Works for me and is not too.... much hassle.
As far as we noticed, Wm6 has a terrible bug. Locked device with a password wont be recognized if battery was removed. Also it resets the clock. I believe there is a solution for the password thing. here's what i've done
1- Download and install this cab file Omega-Pass : http://www.megaupload.com/?d=OTW2NZT6 ( A password application that is gonna be used )
2- Go to the application and set the Password- Now the builtin lock application will take the settings from Omega-Pass .
3- youll notice that Windows Lock will require a password as if set as alphanumeric
4- Go back to the Built-in Lock Application and reset the password u want if u need a numerical form Only.
I think also u can just install the application and go directly to the builtin lock application and configure it but didnt try that. Dont wanna risk it i already had 4 hard reset
Now if you do all 4 steps even if u remove the battery for an hours , it will keep recognizing your password. The clock will be reset only. That worked for me .
Please inform me if it works for you also.
Karim.
120 views and no reply ?
well it may work but i just dont use password lock so ... it is useless to me, but this software does not fix the bug only prevents it from happening
Yes of course it interacts with the Builtin Lock code. if we can know how it's preventing it from happening maybe we can fix it ?
i am not so sure where exactly the bug is, but backup battery is only enabled when the main battery is depleted... but when you remove the main battery the power needed for preserving the basic information like time, date, lock password is not transferred from backup battery maybe this is power management or driver bug, and i have seen this in WM5 too
Buth at this time this problem is not yet solved
The thing i dnt understand is that WM6 devices Dont have a Backup battery as i saw on a HTC Touch device. So is it that BA is not 100% compatible with Wm6 ? or it's just a bug with all wm6 devices ?
well I tried, it seem working. for my case, I didn't need to remove the battery to have the problem, after a simple soft reset (after a reconfiguration with the advance reconfiguration tool), the password was lost.
So I do not know if i will have the problem again .
hope not
how did you get in your BA once the password is lost?
i just got my BA and installed WM6...
im down at my 20mins per retry...
Once the password is forgotten , You gotta hard-reset it. This solution only prevent it from being forgotten and cannot restore it.
What is original pass for that device?
Solution
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Help!!!
vipperdiver said:
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Click to expand...
Click to collapse
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
can anyone upload in rapidshare?
HaiLe512 said:
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
Click to expand...
Click to collapse
Hi Haile...
Did you these steps correct???
After you press the reset button with the stylus, immediately press and hold the record and camera buttons.
It should work.
No more.
wat i did when i experienced the password not accepted thingy was, when i did the hard reset, we needed to follow the "no, yes, yes" sequence. what i did was not choose yes on the option where it asked to reformat rom(i forgot what was written on the display). i think i chose "no,yes,no". after that, everything was still there and the password on startup was gone. hope this helps to some of u guys.
thank a lot
ccrraaapppp
If the device is locked,when the device is locked how can you download and install something...? Please somebody tell this clown that a device locked on password on WM6 ,you cannot access the phone whatsoever at all, WMDC will ask you to "autenticate" on the phone if you want connection...
The guy who gives this solution hasnt got a clue just as much Bill Gates hasnt.
yesss
yes it worked on mine this way as well.
Obviously the correct password wouldnt work...
Id like to see that billionaire giving some appologies for that....
Anyway mind this first;
Press and keep holding Camera and Record buttons .
Press reset in the same time
Keep holding Camera and Record another 2 more seconds .
Using the same two buttons do the No-yes-yes then
Attention ress just "OK" . pressing reset wont work.
IK does unlock .it just did my HTC .
Hi all,
I recently applied the WM6 upgrade http://forum.xda-developers.com/showthread.php?t=372485 to my PDA.
However, I removed the battery so I could take out the SIM card, and now it won't accept my PIN anymore. It seems like the registry has become corrupt and does not recognise the PIN anymore.
I can't get into the phone, and a hard reset does not work (I know how it's done, unfortunately). I have also let the battery drain completely (including backup), and it does not hard reset the phone.
What can I do? Are there any tools that can wipe the device through USB?
Thanks!
Problem Solved: Flashed device with provider's original ROM upgrade.. I see this is an issue with WM6
have you perform the hard resett this way ?
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
Cool, thanks for that. Should help for the next time
Have to disable this Corporate PIN policy now..
hello, this is my first post... I have problems with my HTC hd2 phone, i made him to lock (with password) for every min if its unused, but when i want to unlock ( to enter passcode for its unlocking) it just wont work, i mean like my phone is not reacting on my passcode, so i dont know what to do because im not expirienced with phones that much .... im useing windows on btw, pls help me thx
... and if its possible to flash current softwere, or do something pls help, and explain ..
i know wen that happened to me i had to hard reset the phone to erase the password, hard resest: hold both volume buttons + end while the phone it off then press the up volume button once the screen load.
yeah, i did it too .... but, u know, i thought that someone else knows other way... thx anyway ... i will never make my phone to lock with passcode
I have a password on my phone. When I wan't to unlock my phone I can tap on the numbers. But I can't unlock it. I see that the button lights up. But it doesn't respond. I would like to do everything but the last thing I want to do is giving my phone a hard reset.
Sorry for bad English.
Hi dear
it,s because of ur rom !
u must change ur rom
and maybe a program caused this problem