As far as we noticed, Wm6 has a terrible bug. Locked device with a password wont be recognized if battery was removed. Also it resets the clock. I believe there is a solution for the password thing. here's what i've done
1- Download and install this cab file Omega-Pass : http://www.megaupload.com/?d=OTW2NZT6 ( A password application that is gonna be used )
2- Go to the application and set the Password- Now the builtin lock application will take the settings from Omega-Pass .
3- youll notice that Windows Lock will require a password as if set as alphanumeric
4- Go back to the Built-in Lock Application and reset the password u want if u need a numerical form Only.
I think also u can just install the application and go directly to the builtin lock application and configure it but didnt try that. Dont wanna risk it i already had 4 hard reset
Now if you do all 4 steps even if u remove the battery for an hours , it will keep recognizing your password. The clock will be reset only. That worked for me .
Please inform me if it works for you also.
Karim.
120 views and no reply ?
well it may work but i just dont use password lock so ... it is useless to me, but this software does not fix the bug only prevents it from happening
Yes of course it interacts with the Builtin Lock code. if we can know how it's preventing it from happening maybe we can fix it ?
i am not so sure where exactly the bug is, but backup battery is only enabled when the main battery is depleted... but when you remove the main battery the power needed for preserving the basic information like time, date, lock password is not transferred from backup battery maybe this is power management or driver bug, and i have seen this in WM5 too
Buth at this time this problem is not yet solved
The thing i dnt understand is that WM6 devices Dont have a Backup battery as i saw on a HTC Touch device. So is it that BA is not 100% compatible with Wm6 ? or it's just a bug with all wm6 devices ?
well I tried, it seem working. for my case, I didn't need to remove the battery to have the problem, after a simple soft reset (after a reconfiguration with the advance reconfiguration tool), the password was lost.
So I do not know if i will have the problem again .
hope not
how did you get in your BA once the password is lost?
i just got my BA and installed WM6...
im down at my 20mins per retry...
Once the password is forgotten , You gotta hard-reset it. This solution only prevent it from being forgotten and cannot restore it.
What is original pass for that device?
Solution
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Help!!!
vipperdiver said:
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Click to expand...
Click to collapse
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
can anyone upload in rapidshare?
HaiLe512 said:
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
Click to expand...
Click to collapse
Hi Haile...
Did you these steps correct???
After you press the reset button with the stylus, immediately press and hold the record and camera buttons.
It should work.
No more.
wat i did when i experienced the password not accepted thingy was, when i did the hard reset, we needed to follow the "no, yes, yes" sequence. what i did was not choose yes on the option where it asked to reformat rom(i forgot what was written on the display). i think i chose "no,yes,no". after that, everything was still there and the password on startup was gone. hope this helps to some of u guys.
thank a lot
ccrraaapppp
If the device is locked,when the device is locked how can you download and install something...? Please somebody tell this clown that a device locked on password on WM6 ,you cannot access the phone whatsoever at all, WMDC will ask you to "autenticate" on the phone if you want connection...
The guy who gives this solution hasnt got a clue just as much Bill Gates hasnt.
yesss
yes it worked on mine this way as well.
Obviously the correct password wouldnt work...
Id like to see that billionaire giving some appologies for that....
Anyway mind this first;
Press and keep holding Camera and Record buttons .
Press reset in the same time
Keep holding Camera and Record another 2 more seconds .
Using the same two buttons do the No-yes-yes then
Attention ress just "OK" . pressing reset wont work.
IK does unlock .it just did my HTC .
Hi all ,
Please any one help me to open my HTC P3600 as i put simple lock key on it , put i forgot it , How i can resolve this problem , i need data on my mobile.
Thanks
Do you mean a PIN when you switch the device on? If you can't remember it then you're stuffed, IIRC. Even ActiveSync won't backup or connect without a PIN.
Best get those little grey cells working to remember it Or Hard Reset and start again....
Hey guys ! I just have a big problem ... i have so many Hard-reseted my device that the Volume Down Button don't work anymore ...
I Flashed Blackstonehenge 4.4 (like always ^^), It worked fine, like always but this time 1 week after my htc is stuck at the boot screen i can't even get a way to boot it, i can't make a hard reset or even enter in Bootloader mode -_-
Please i really need your help
Sorry if i have a bad english -_-
Nobody really know a way to do the trick ?
Have you tried to dismantle the back-case? If you actually damaged the button inside the phone, I guess the only way is change the damaged part...
hello, this is my first post... I have problems with my HTC hd2 phone, i made him to lock (with password) for every min if its unused, but when i want to unlock ( to enter passcode for its unlocking) it just wont work, i mean like my phone is not reacting on my passcode, so i dont know what to do because im not expirienced with phones that much .... im useing windows on btw, pls help me thx
... and if its possible to flash current softwere, or do something pls help, and explain ..
i know wen that happened to me i had to hard reset the phone to erase the password, hard resest: hold both volume buttons + end while the phone it off then press the up volume button once the screen load.
yeah, i did it too .... but, u know, i thought that someone else knows other way... thx anyway ... i will never make my phone to lock with passcode
hi, igot this HTC tattoo for unlocking but i found that even without sim it asks for phone lock , but i cant also enter any right code as calibration on screen is bad , and hard reset with home and back button didn t solved the problem plz any help apreciated
br