Related
Has anyone succeeded yet, I've got a belkin bt card F8T002 and xp, I can get the devices to bond but that's it, no sync. When I try from xda2 i get some message saying the port may be in use. Also the belkin info says I should be able to see several icons from My Bluetooth Places, I've got nothing, and after I set up the configuration, the information doesn't seem to be saved, when I re-enter the configuration I have to put it all in again.
It's a bit of a bugger really
Hy!
I've an xdaII.
I've the same problem with the USB Dongle's 3Com : 3CREB96B (on my PC).
Activesync doesn't initialisate, but i can send and received files by transfer without activesync.
I borrowed a Blue Tooth dongle from a friend at work. I got the ActiveSync running fine after a bit of messing about. It worked fine both for browsing and syncing with outlook
I only got it to work by selecting 'Connect via Bluetooth'. As this was some days ago and I've not yet had the chance to borrow the BT dongle again I'm not quite sure what I did.
However IMHO Bluetooth is one of the worst connection systems I've had to work with in a very long time .... Last time it was this bad was when you had to use a third party TCP/IP stack with Windows 3.1
Bluetooth Sync
unpair your XDA II and your PC. Then modify the below registry and pair again. After Pairing, run your Activesync in your XDA II and click Connect via Bluetooth in the tools
\HLKM\SOFT\Microsoft\Bluetooth\Activesync
IsBTASsetup from 0 to 1
I'm using - Dell laptop with integrated Dell bluetooth, XDA2 with original 1.03 rom, ActiveSync 3.7.1, Windows XP+SP2. I *AM* able to: synchronize fine with USB cradle, synchronize with IR, and beam files directly to the XDA2 from the laptop via bluetooth.
I have successfully: removed all traces of Widcomm, removed and reinstalled the plain old XP/SP2 BT drivers, have removed the pairings and re-created the device pairings successfully, removed and re-created the incoming COM port, renumbered my incoming COM port to 3, set ActiveSync to 'allow serial connection' to COM3, turned off XDA infrared, tried out "Pocket Bluetooth Tools" too, disabled my firewall. I moved my modem from COM3 to COM13. All the devices are 'working properly' according to control panel. Bluetooth switched to 'On' on XDA, once already paired. Bluetooth Devices/Options/Connections/Allow BT devices to connect is ticked.
Now I have tried to connect as documented in the many webpages on this subject, including GeekZone:
A. On the desktop - ActiveSync/File/Get connected... gives the message 'looking for mobile device on IR and COM3' but then nothing happens. After failing, it shows the list, and COM3 is 'available'.
B. On the XDA2 - Start/Settings/System/Bluetooth settings/Start activesync setup - gives message 'Please bond with device supporting serial port' - then takes me to the bonding screen. But I am already bonded successfully!
C. On the XDA2 - ActiveSync/Tools/Connect via BT with 'Laptop' - gives the message 'Cannot start communications with the desktop computer, critical error 608'.
As the pessimistic bobopopo recommended, I tried doing these last things repeatedly in every possible order!
Possible clues as to the problem:
1. I can't get the bluetooth icon to come up in the system tray. It comes up temporarily if I uninstall and reinstall the XP-SP2 drivers, then goes away next time I reset - even though the item 'Show the BT icon in the notification area' is always checked.
2. The first time I make a pairing, the word 'connected' appears below the icon for my XDA2 in the "Bluetooth Devices" dialog, on XP. Once it goes away, thereafter I am unable to get it to say 'connected' again. How can I get it to connect?
3. First time I bonded I got the Pocket Bluetooth Tools profiles dialog on the XDA2 - and ticked all the boxes, including serial port. Now I can't seem to get that screen back again?
4. On the XP machine, if I go to Control panel/Bluetooth Devices/Devices, select the XDA2 that is paired, then Properties/Services, I get only 'Dial up networking', and no exciting stuff like COM, OBEX, audio, PAN etc. - is this right?
5. If I go to Control Panel/Bluetooth Devices/COM ports/Add/Outgoing, and put Browse.., it searches for a while then says 'Windows cannot find any Bluetooth devices. Make sure it is switched on' etc.. although the device is clearly visible. So I can't create an outgoing COM port.
6. Can't beam files from XDA2 to Laptop: though XDA can see the other machine when you try to pair, it can't see it when you go to File/Send To/Infrared recipient - just empty dialog 'Searching...' forever. ('Accept incoming beams' is on and Bluetooth is on.)
????? Is it me or is it Microsoft ?????
mate,
reading through your post (although don't consider me an expert on this) it appears that you have the same problems i had before. bottomline? i discovered that windows xp service pack 2 screws up installation of bluetooth software. took me ages to figure this out but what i did was uninstall sp2 and went for sp1 instead. i've read several posts here and in other sites that sp2 doesn't really do well for bt apps...not sure if this is the same for the other chaps but it sure was for me. anyway; i uninstalled all bt software, uninstalled sp2; installed sp1 (reboot, etc), and from there proceeded with reinstalling my bt and activesync apps. from there i followed the guide given in geek zone and presto bt activesync.
the items you described in 1-6 definitely remind me of the sp2 trouble i had.
hope that helps.
cheers mate
I found that if I use the cradle to link to activesync this will create the partnership, then use the bluetooth next time and it will work, it seems you cannot get an original partnership over bluetooth.
I don't think its SP2 itself thats the problem. Its the Microsoft bt stack built into SP2.
You can actually run SP2 and the Widcomm bt stack. If you install Widcomm before SP2, then it won't install the Microsoft bt stack. I had the same problem and this resolved it.
The Microsoft bt stack in SP2 is Microsoft's first attempt at bluetooth. Looks like they still have work to do.
JD
Bluetooth activesync is easy IF YOUR NOT in Windows XP SP2!!! best thing to do is to downgrade to SP1.. unfortunately for me im stuck with SP2 in my desktop... but upon discovering this problem i never upgraded my laptop to SP2.. i left it with SP1 nd everything works in harmony...
MORAL LESSON OF THE STORY: NEVER UPDATE TO XP-SP2 if your using bluetooth activesync. :wink:
I've had no problems syncing over BT with SP1, SP2 MS stack and widcomm.
Here's how.
First of all delete any pairings on both PC and XDA.
Sync over USB then on the computer use connection settings to select the correct BT com port.
On the XDA goto Settings->System->Bluetooth->Start
Now repair your device and select ok till you get back to today screen
Goto activesync and then tools->sync over bt
Always has worked for me. If you're still having problems its quite possible that you haven't got the right ports setup on the PC.
YUP! it's all about the COM ports... SP2 gives out extremely high COM ports that activesync doesnt recognize...
Is your PC using...
1. SP2 + MS bluetoooth stack
2. SP2 + Widcomm bluetooth stack
I've followed the method laid out by fruitloaf many times, and only the 2nd combination works for me.
You might also want to consider upgrading from rom 1.03 if you can.
JD
fruitloaf said:
I've had no problems syncing over BT with SP1, SP2 MS stack and widcomm.
Here's how.
First of all delete any pairings on both PC and XDA.
Sync over USB then on the computer use connection settings to select the correct BT com port.
On the XDA goto Settings->System->Bluetooth->Start
Now repair your device and select ok till you get back to today screen
Goto activesync and then tools->sync over bt
Always has worked for me. If you're still having problems its quite possible that you haven't got the right ports setup on the PC.
Click to expand...
Click to collapse
Fruitloaf, is yours an original Orange machine? I've heard this works with SP2 + MS stack, but the O2 Xda II doesn't.
JD
I had this problem constantly with my XDA II and a Toshiba Laptop. All routes of advice came to nought.
The answer for me was to install Pocket Bluetooth Tools, a BT connection manager which has a specific Activesync Profile. Using this has enabled me to use BT A/S with my Win XP Tablet SP2 PC without problems. You have to initiate the Activesync process from the XDA though.
Once you have installed BT Tools, and created an A/S profile using the cradle, go back to the XDA and delete all existing BT Pairings. Then go through the "Bluetooth / Paired Devices/ New routine again. After finding your PC, continuing will give a new Dialogue box with available pairing options. Select "Activesync" and finish. Do a soft reset.
From there, go to Start/Activesync, then tap Tools/Connect via Bluetooth and all should work.
I recommend using PBT Tols version 1.0.1.2 not the newer version, as the later version causes some power management problems with the XDA II.
Available Here
bluetooth virtual com port too high for activesync
I have a Belkin F8T001 v2 BT USB dongle. BT was working under win xp sp2 and could transfer file etc from PC to XDA IIs and back.
However I tried setting up a BT active sync connection and had the problem that the virtual com port picked by the belkin supplied widcomm BT driver was too high for activesync, it was com20. I followed this thread but could not uninstall the driver and use the driver from SP2 as it doesn't seem to support my belkin USB BT dongle. So I had to go back to the driver supplied by Belkin. I thought I was stuffed until I came across a post that sorted the problem, I'm afraid I dont have it to hand to give author the credit. But here is what he/she said to do.....
1. Disable bluetooth in device manager and remove the high numbered com port from device manager.
2. Then use regedit to change
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\COM name arbiter"
I followed the instructions and changed the first 3 entries in theComDB field to be "0f".
3. Enable Bluetooth in device manager
4. Use bluetooth settings -> local servies to add a new COM port, then set it to autostart in the profiles section.
This time it came up as com5, and bingo activesync could find it and I was off....
Hope this helps others with this problem, usual disclaiamer when fiddling with registry back it up and dont blame me if it doesn't work or your equipment goes up in smoke
Good luck, Wayne
http://www.geekzone.co.nz/content.asp?ContentId=3163
this guide works just fine for me
Marc MD said:
YUP! it's all about the COM ports... SP2 gives out extremely high COM ports that activesync doesnt recognize...
Click to expand...
Click to collapse
That's is my problem, the high COM ports are not recognised by ActiveSync! I think i have 2 downgrade to SP1 and then upgrade again to SP2, hopefully that will work.
The BT drivers is not my problem but it's impossible to select the com port in activesync (but the com ports are visible in the device manager!).
Thanks to this forum for geving me hope , now i know what the problem is.
If you read my post with the registry change above I think you will find it will solve your problem, as I stated this was the only problem I was having with the BT driver.
This is a lot simpler than downgrading to SP1 etc.
AT last I done with this help and use widcomm Bluetooh Software 1.4.2 bulid 10 now my active snc work great with winxp sp2and wm2003se ..
just flow the thats:.....
This issue may occur because the Bluetooth drivers that are provided by Microsoft support a different set of profiles than the drivers that are provided by some third-party vendors. The Microsoft-provided drivers are also signed and will therefore be installed instead of a third-party driver for supported Bluetooth adapters. The Windows XP SP2 Setup program will try to detect if a third-party driver is present. If the third-party driver is installed, the Microsoft-provided Bluetooth drivers will not install. This action makes sure that an existing configuration is not modified. If both provided drivers were installed, and the Bluetooth Radio were connected to the computer, the Microsoft-provided driver would load because it is signed.
If the missing functionality is critical, you may restore the third-party support. To do this, follow these steps.
Note The following steps assume that the third-party software is installed. If it is not, install the software according to the manufacturer's instructions. Then follow these steps from the point in the installation process where the adapter is connected to the computer.
1. Click Start, and then click Run, type devmgmt.msc, and then click OK.
2. Locate and then expand Bluetooth Radios.
3. Right-click the Bluetooth adapter, and then click Properties.
4. On the Driver tab, click Update Driver.
5. Install the updated driver manually by using the Have disk option in the wizard. Locate the manufacturer's installation files, and then find the .inf file that is required to install the driver.
6. Complete the manufacturer's software installation steps.
At this point, the third-party provided drivers should work. If at any point you re-enumerate the Bluetooth adapter, the Microsoft driver will be reinstalled, and you must repeat the procedure. This issue will occur only if the third-party driver is removed or if another model adapter installed.
thats link is for bluetooth software v 1.4.2.10
http://asia.giga-byte.com/Communication/FileList/Driver/btd01.v.1.4.2.10.zip
i've tried everything but it still gives out high COM ports...
Marc MD said:
i've tried everything but it still gives out high COM ports...
Click to expand...
Click to collapse
Go to device Manager, find those high Com Ports, choose Properties - Advanced and at the COM port number choose a low one, Like COM3 etc. Don't bother if it say that it is alreaddy in use...
The go to Active Sync and in the Connection Settings choose from the drop down menu COM 3...
Go to the Activesync in you XDA, in the Options choose connect using Bluetooth and the... click on Connect via Bluetooth from the XDA...
You're done...
I have an O2 Xda II Mini (Magician) and I am using an XMicro Dongle on my laptop (Win XP with SP2) and ActiveSync3.8. Initially syncing with BT was a problem but now its not a problem at all.
To reduce the COM port nos. on your computer try the following website
http://support.microsoft.com/default.aspx?scid=kb;en-us;315539
Once you can see the hidden devices and ports delete/uninstall all the ports which are not in use.
1 To sync with BT first delete all your pairing with your computer and phone on both devices.
2 Go to BT Manager on your phone and click both check boxes for Inbound and Outbound COM ports and pair the devices.
3 Once they are paired go to BT manager again and click on the start button (for BT activesync setup) and pair the devices again if you have to.
4 Once that is done check on the computer in BT Manager click on the phone device>property>services....the Serial Port Profile (SPP) "Serial Port COM4" will be checked.
5 After that on the computer's BT Manager itself ensure that the COM ports folder shows incoming and outgoing ports with the phone's name in front.
6 On the ActiveSync (on the ocmputer) ensure that the COM port no. is the same as the Incoming COM port no. given in step 5 above and it being shown as available. Sometimes if it is unavailable, the computer needs to be rebooted and then it will be shown as available.
7 Click on ActiveSync thru BT on the phone and it should work.
It has been working for me since the past couple of weeks. Initially it took a lot of time to set up but now even if the pairing gets deleted or something messes up its working fine. One thing to remember is that in case you are using a dongle with a laptop ensure that the dongle is plugged in BEFORE you boot up the laptop. A lot of people plug it in later and then ActiveSync on the computer shows the COM ports as unavailable.
Hope this helps.
Having installed my BT USB dongle after I installed Activesync on my PC, I didnt have the Connection settings in my PC's BT Settings. after setting up the partnership, AS on the JJ would always say i needed to setup a partnership again.
Baffled me for weeks, but today I fixed it, and its very simple to do....
Code:
In your PC's BT settings find the Local Services BT Serial Port, note the com port, in my case COM5.
In AS on the pc make sure the "Allow connections to one of the following" is checked and set to the same com port as the BT serial settings.
Thats it!!! no incomming or outgoing ports needed on the JJ, just go into AS and goto menu and hit connect via bluetooth, off it went and sync'd up, no questions asked.
This is very pleasing to me and I can now fix my work lappy aswell, which is where this will be really useful.
Yes yes it works. I was spending 2 mins connecting over BT every time i wanted to use AS.
Thanks.
i do it but nothing of nothing
THANKS A MILL!
after many days trying to get this to work, i finally got it nailed, keep up the good work guys
Big problem with Activesync by Bluetooth on JasJar
Hi,
I have already read more forum on this question.
I have e problem trying to connect by bluetooth to ActiveSync.
When I pair my JasJar to PC not appear the service ActiveSync, but Serial Port.
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
had same problem,you have to get rid of all phantom bt ports there is some stuff on windows support
Thanks for reply,
How can I remove phantom bt port?
Pozzame said:
Hi,
I have already red more forum on this question.
I have e problem trying to connect to ActiveSync by bluetooth .
When I pair my JasJar to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
Click to expand...
Click to collapse
Please, can someone help me?
On my computer and Universal, I find it easy to setup BT Active Sync if I activate the setup on the Universal first using active sync app. There is an option within the active sync app to sync via BT. The computer will then recognize the device and will ask you if you want to pair it. On the other hand, if I try to pair them beginning with my computer to search for the Universal, after pairing and ticking all necessary boxes, it still won't sync.
After pairing and ticking all necessary boxes. Make sure you reset BOTH your computer and the Universal.
The problem is that when I pair my Universal to PC, not appear the service "ActiveSync", but "Serial Port".
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
I don't know what to make.
Can someone help me?
Please.
Nobody has had my same problem?
Any idea, please?
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Things I have learned:
- If UNI is connected via USB then AS service will not show in device pairing on PPC.
- You need to create an incoming COM port on PC and set AS to allow connections to this port.
raad said:
I had the same problem until I upgraded from Toshiba BT stack to Wildcomm BT Drivers stack (4.0.1.700).
Click to expand...
Click to collapse
I haven't change the bletooth stack.
Until some week it makes worked regularly, but an evening, I was configuring my Laptop to use the JJ like BT modem, when the AciveSync service has begun not to recognize more like such, but like “Serial Port”.
I've already tried to delete everything and reinstall bluetooth pen, with his drivers and with windows drivers, and ActiveSync too.
I've also deleted all pairs and all port on Universal.
But I've not obtained any result.
Yesterday, I have tried the synchronization with an other PC with a fresh installation of windows, but the result has been the same one.
Therefore the problem is on JJ, even in the registry.
I don't know what to make.
Please, can someone help me?
Up
Please help me...
Don't know if this will help and I claim no credit because this solution was written in some other threads. For the universal with a Toshiba bluetooth on your PC:
first, pair your Universal with your PC, you get "serial"
On your PC, create the following "bluetooth local com" (Control panel)
- COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
- COM6 Toshiba BT Port (COM6) LocalCOM-Client
In your activesync, allow connection to COM7
Now comes the fun part. On your universal, go to your bluetooth settings, devices, edit your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync.
It worked for me.
Eric
Also got to the control panel on PC and delete the bluetooth modem that was created. When u add a new incoming port on PC make sure it's not COM8 because that is used by JJ for USB modem connections.
same on treo 750v
I have the exact same problem on my Palm treo 750v. Searched the whole internet for a solution and found some other people with the same problem but no resolution. The only recommendation that seems to work is to do a hard-reset.
The problem started on my device after I played around with the Soft GPS port. It seems that it screwed up some COM port references for good...
I had the same problem on my notebook with Toshiba's BT drivers. I uninstalled them and connected an external USB BT which fired up the MS default BT stack.
After I completed the pairing using Bluetooth Devices (in control panel) and clicking Add in the devices tab, I used the COM Ports tab and added an incoming port and copied the number of this com port in the AS connection settings.
Now, I initiated the AS over BT from the Jasjar and it said something like "it cannot find the service or whatever and would you like to create one". I clicked yes, when it took me to the list of paired devices. From here I did what leblan has also noted "your device and press "Refresh", possibly more than once. Serial Port will change to ActiveSync." I too found that the serial port changed to ActiveSync. The key, IMHO is to hit that "Refresh" button; i.e. once your device and PC are paired and connected, going to the BT devices and editing (press & hold)the device name (the notebook or PC in this case) you will get the services which will initially say serial port, but when you click refresh, it will change to AS.
jj activesync via microsoft bluetooth stack
both from PC and JJ :
delete eventually existing pair between them;
from PC:
if there isn't create a local service COM port. I created COM8 not protected, automatic start;
from PC activesync:
remove flag both for USB and other connections;
from JJ activesync:
try to connect, it ask for pairing, reply yes;
In "mode" flag on turn on bluetooth & make this device visible;
search for new devices, when PC has discovered complete the pairing;
after paired, you can see a serial port and other PC's services;
stay there;
from PC activesync:
now turn flag on other connections setting COM8;
from JJ:
refresh and You can see that serial port begin activesync;
tip OK for close all bluetooth setting windows, You are redirected in activesync.
enjoy start to sync
15hours of crying and knocking the device. i've successfully fixed it...
i did this (credits to google)..
Delete all paired bluetooth devices from PC and from MOBILE.
CAUTION - USE IT AT YOUR OWN RISK <--- I used a registry editor for the mobile phone (google for regeditSTG2) and opened the Branch "HKLM\SOFTWARE\Microsoft\Bluetooth\ActiveSync" There might be a Key with a hex-String like this "0016cxxxxxx" --> delete it. Change the View to display the values in this Registry Branch, then delete the "LastConnected" Value and set the "Initialized" value to "0"
Turn bluetooth OFF>ON
Pair from PC
Confirm on DEVICE (dont need to select anything just enter code and press OK)
Go START->Active Sync->Connect via Bluetooth
Click to expand...
Click to collapse
Voilla worked for me..
hope this helps someone else
I've managed through pain and misery to get Activesync to work through bluetooth (not easy with widcomm stacks as drivers).
When my PC boots up, Activesync (PC) will complain that the bluetooth COM port isn't connected (obviously because my phone isn't connected through bluetooth 24/7)
So everytime I reboot my PC, I have to re-check the COM port connection in the connection options (PC) to make Activesync listen to my bluetooth COM.
Any suggestions?
Also, I know that when my phone is connected via USB, my phone will gain access to the internet (My PC has the internet connection and shares it to the phone). With bluetooth I havent been able to get this to work. Yet both USB & bluetooth work through Activesync. Is there something Im missing?
Thnx! I hope this isn't too specific/complicated like question
I used to have some of the same problems. What I found that usually it was 2 things causing it.
1. Activesync - Installation or Configuration
2. BT Software - Installation, Configuration or Need BT Software upgrade
What fixed my issue was 2 fold: activesync settings & needed to upgrade my dongle's software.
Activesync: When I installed 4.5 it setup a network connection that kept running in. And when I started up my PC I could see the icon running in my sys-tray (and would have troubles on and off again either with bluetooth / USB sync. What I found that worked for activesync was uninstall and make sure you check off allow wireless activesync connection. I've also found it likes to use com 3 for BT activesync.
BT Dongle: I have Motorola PC850 dongle and found that there was a great new BT Stack update that would hold the settings even if I turned my PC off for weeks at a time or removed the dongle to somewhere else. Plus it fixed the issue I had with using my BT stereo headset, to listen to music with out pops and skips. Oh In your BT settings make sure that com 3 or what ever your using is the same as activesync
Hope I can test those few tweaks.
However, after connecting my phone to activesync by USB, now my phone won't even connect by bluetooth to my PC anymore.
STUPID STUPID bluetooth stacks