My touch screen is locked. I can't use it unless I hold down the left soft key, then it works fine.
At one point I managed to get it to work though pressing a sequence buttons but it stopped working after a reset, and I can't remember what I did.
I've even flashed this with the original ROM and it still does this.
Any ideas?
Thanks.
this may be a rom bug, try using an older much more stable rom to see if this cures the problems, or you can always take it back to the store you for it from and ask them to re-flash it, they usually do this for free
Related
Hey guys my hd has locked it's self i can bring it out of standby but it wont unlock the touch screen.
have done 3 hard resets and it gets to the "tap screen to continue" screen but still says "unlock" in the bottom left corner.
it wont allow me to unlock it.
i am running the stock rom 6.1 on orange uk.
can anyone help?
does that corner of the screen work? what happens if you press phone? do you get the dialer? it could be that the screen doesn't work.
the soft keys doesn't work apart from the hang up key which vibrates and lights the screen. But when i touch the unlock button nothing happens. if i press the volume control i get the htc volume control as well
Well I had this problem once and only thing which worked was when I connected the phone to the power for charging and it immediately unlocked.
have you tried going into bootloader mode? if you can, then try install a new ROM...
Ok i didnt mean the soft keys. There is a option in the bottom left corner of the screen that says phone, i was wondering if you touch that corner does it work.
Also if only 1 of the soft keys are working you have a another issue as well. I would be getting in touch with orange and looking at sending it backfor now. I would flash any custom roms as this will affect the warranty. Look into keeping the warranty in tact until the issues have been resolved.
1 thing you could try is flashing the original rom again. See if you can find the orange ROM (it's on here somewhere) and reflash with this and it might solve some of the issues as this will do a little more than a ard reset will.
thanks for your feedback guys. Nothing i did made any difference so it's gone to HTC to either a: fix or b: replace. i was lucky in that i hadnt flashed any roms into it yet as i didnt wont to invalidate the warrenty and that orange being s#it, wont even let me upgrade the stock ROM. grr. will post on here when i find out what it is.
no idea what was wrong with it and they replaced the whole touch screen.
thread can be closed.
thank you
Thread closed as per request
So I am having to flash back to a previous version due to some issues with the camera and battery.
Flash back to a Telstra official ROM from HTC website - it installed fine - however when it goes to the 'align screen' it doesn't register any taps at all.
If I try to reflash with an older original rom it comes up with a connection error
Any ideas?
--- Update ---
I have updated to the original stock rom for Telstra + original SPL 1.15 - when I boot however it does the 'first time setup' - and the align screen comes up - if I 'rub' my finger around the location it will move - but no single tap works - after going through the five spots - it will just then loop again... really frustrating!
Similar symptoms
After updating my touch HD I noticed a similar effect. When my phone was new the screen align requested 5 taps then proceeded, however after flashing to newer ROMs the screen align intermittently repeats itself.
I've found however that it suceeds more often (and quicker) when I use the stylus to tap the center of each cross and make sure each of my taps are 'long-holds' (like when holding the 'tap' for the context menu).
I have put it down to an update perhaps trying to more accurately align the screen to the user? But I would be interested to find out if in fact it is a problem with the software, or something with the screen maybe?
Unfortunately though, my only offer of a solution to your current problem would be how I got passed it; patience, and firm screen taps (with the stylus).
i think it's best to use the stylus whenever you align the screen. i usually tap-and-hold until the crosshair moves to the next spot. i've never been able to align with my finger.
I would recommend a hard reset and try again. Worked for me!
yeah I tried a hard reset - and tried holding for ages as well - no luck so far
Gil-Dale said:
yeah I tried a hard reset - and tried holding for ages as well - no luck so far
Click to expand...
Click to collapse
are you using a stock ROM along with a stylus? also, if i recall, you were wanting to reinstall your stock ROM to get your device serviced? correct? was the screen one of the issues you wanted to fix? and finally, if you applied the stock 1.15 SPL, be sure you flashed the ORIGINAL Telstra ROM. i'm not sure of this (and it could be a moot point) but flashing to the newest Telstra ROM could update your SPL. sorry for all the questions; this is my way of brainstorming via user forums.
Recently I just flashed to kumars 1.6 premium and everything came out successfully. Then yesterday I tried installing fixoperaflash and of course, it didn't work so I rollback and now I'm noticing that whenever I press the "back" hard key, it takes me to the windows start menu, and when I press the "home" key it takes me to the phone screen instead. Also whenever I put my phone to sleep/lock, the hard keys are somewhat still lit up. What happened to my phone? Help pleeeease!
i would use pimbackup, then either a hard reset or task29 and reflash...
note: im not an expert by ANY means... just my opinion on the matter..
tried a task29 and hard reset then reflashed with kumars 1.7 lite.
still has the same issue, is it hardware? i mean the hard keys are very dimly lit when it's in lock mode, the only time it would turn off is when the phone is off.
as of right now, the hard keys would work sometimes but most of the time the back would either take me to the start menu or the system/ring volumes. what is happening to my TMOUSHD2? i cant return or exchange with tmobile as i purchased it off someone else on craigslist and i know it wasnt like this when i first purchased it.
this is a new problem for me. I have been using the most recent Dutty ROM together with Mdeejay Android ROM without any problems. All of a sudden, when I try to unlock the screen after STANDBY, it just wont register my touch, as if I am not touching it. It boots up fine, and on the first unlock works fine, but when the screen lock goes on again (after every standby) it just wont unlock. So I am stuck (I use Exchange and our policy forces the lock after standby, so I have to use it - and its worked fine for ages).
If I boot into Android, it works fine, the unlock works fine, yet strangely when I try to shut the power down, THAT screen also doesnt register me touching it.
I have hard reset but even before I load an app or do anything, the problem exists.
I also reflashed a DUTTY ROM. Same problem.
I tried CHT lockscreen - same issue. After Standby, screen doesnt register my touch.
Anyone have any ideas?
Same problem for me.. Restoring a backup image after being forced to hard reset this morning and now suddenly my HD2 won't wake up after sleeping. Pressing my end key only lights up my buttons but I have to pull the battery to reset. I'm thinking it's related to me having CHT installed, yours however might be a different problem.
I had something similar. It was right after I had installed CHT 2.0 and was looking to make the top and bottom bars transparent. I found a cab that claimed it would do this and installed it. Sorry, I don't recall what cab it was and I have deleted it. When I rebooted Sense would hang and if it got into a lock it would only move the slider a little where it would stop. Luckily, I had done a backup that morning right after I installed CHT 2.0 with Sprite so I restored and all was well.
I don't know if this is of help but I figured I'd throw it out there.
it wakes up, but wont register when I try to swype the unlock screen.
ekerbuddyeker said:
it wakes up, but wont register when I try to swype the unlock screen.
Click to expand...
Click to collapse
Your lucky you get that far lol.. I don't get any waking up. Plus I now uninstalled S2U2 and still no change. Disabled all locks of any kind and still frozen with sleep of death with in 1 min of hitting power to sleep it. I REALLY don't want to to a hard reset and install everything from scatch.. UGH.
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
bump this is horrid
same
im having the exact same issue. I have flashed 3 different roms and flashed to the newest radio (2.15).
I started out using energy rom, didnt help. Flashed a newer energy rom, didnt help. Now im using the dusk rom, same issue.
SOMEONE PLEASE HELP!!!!
It's a quite common digitizer problem lately... it seems the HD2's digitizer is failing on some units, possibly because of usage with android? my father's device acted the same way, only it sometimes did register touch and other times, not.
My device doesn't have these problems, yet. But seeing that a lot of people here are experiencing these issues, and with the notion that I use android pretty much all the time since I first booted my device, i'm pretty sure i'll experience it soon as well..
Make no confusion thou, the assumption that android effects the digitizer are purely my own thoughts on this matter, no such thing has been proven and the conclusion that android is effecting our HD2s is based purely on the statistics of touch screen failures in the last few months since android has been made publicly available in a working form.
EDIT:
Those seeking A solution, as far as I know, the only solution is sending your unit to HTC for repairs, you'll get it back with a note that says that they replaced your digitizer or your screen, at least these are the reports I heard from the other folks whom followed this procedure.
Good luck.
HTC HD2 Screen Lock
I have only used Android a few times on this 'phone and it has a standard HTC/O2 ROM installed so it must just be a problem with the top part of the digitiser. With android running the unlock is at the bottom and is unaffected.
Is there any way of testing the digitiser before deciding whether to get a repair sorted,
Ta,
link:
htcphones.net/htc-hd2-problems-with-touchscreen
short version :
change digitizer
ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
A friend was complaining to me about something like this since last week. I could not figure it out so I went ahead and installed Android cm7 and still have the same issue.
Until I read this post after searching through the forums all over Screen now unlocks perfectly fine but only using the green Phone icon. If I try to wake the screen with the red Power button, the screen is unresponsive.
Thanks for the info.
Already happened tome its a hardware issue can't be fixed so if you still have warranty on ur phone send it to htc for repairs b because it tends to get worse n worse soon other keys will start to give in I think that's one reason why most android phone been switching to capacitive buttons because hardware causes this sorta issues and send it in for repairs to get it fixed
Sent from my SGH-T959 using XDA App
the same issue with me , is there is any solution for that .
Wakeup the phone using the send button.it will work
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
had same problem, found a FIX
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
tidygrant said:
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
Click to expand...
Click to collapse
well i have woke up this morning to be able to unlock my device to then locking it and not being able to unlock it again!!! i had notification to say it had managed to restore 16 apps whilst i had been asleep so i am thinking there is a dodgy app out there some were
mazdarider23 said:
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App
I have this problem and have found no way to fix it, I have tried everything except possibly going to the clk loader instead of magldr. when i put the phone to sleep with the power button is when i have the issue of not being able to unlock my phone in Android. I have tried task 29, going back to original windows roms, sd and nandroid, it is a hardware issue related to the digitizer as far as I'm concerned. I love my HD2 and really need to fix or find another one. I know this doesn't help, but maybe a little more insite if nothing else
I had the same issue. With my 1st HD2 it started as an intermittent problem, then eventually completely stopped working. With my replacement it just started to happen again. I immediately flashed back to stock tmo windows and the touchscreen would work so long as I did not try and put the phone on standby or wake the phone using the end key. If the phone went to standby on its own, the touchscreen would not work either. I changed the settings so that the phone would not go into standby at all. I then learned that locking the phone from the windows menu and allowing it to go to standby that way somehow averted the touchscreen problem. After 2 days, the problem seemed to resolve itself, almost completely. If I try and wake it using the end key, the touchscreen still wont work, but every other button on wake works. Also, putting it in standby with the end key seemed to not cause the problem any longer.
I dont know if the issue varies per person, but what worked for me was going to stock windows for a couple of days, then starting over with android. I guess it depends on how far along the problem has progressed.
Look at my thread in my Sig about the Unresponsive Screen Solved. This sounds exactly as that. And there are various workaround solutions through out the post.