phone been dead - JAMin, XDA Neo, S200 General

thanks for ur reply, i had made full hard reset but its not starting, after hard reset the handset get stopped at the display in the top where was 4 lines was coming now its shows 3 three lines only the three line comes blank before it was showing n radio rom now that line is missing which the handset is not going further, & now the charging also is not working through the data cable as well as the charger. the phone is totally dead what to do now needs ur help .
thanking you
mahendra

Anyone know how to solve this problems? I am facing this too.
Thanks.

Maybe..
I guess, you installed new WM6 rom. But you didn't increase HardSPL version.
Try to non-customer WM5 rom.
http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe

Related

SPV M1000 Resets completely for no reason..

Dear All,
I have had my SPV now for about 4 weeks now and very pleased with it. However, twice in the last week it hasn't responded when I turned it
on and ended up removing and re-inserting the battery. When it comes back, it starts with the "Welcome to Pocket PC" setup wizard and all my data is gone.
Has anyone else had this problem. This problem has happened with both
versions of the ROM. The only s/w I am running is
Tube (VisualIT)
MS Arcade Pack (Pacman, DigDug etc)
MS Voice Command
Agenda Fusion
CityTime
Regards & Thanks
Chris
Yeah i got the same problem. But it happens when I upgraded my ExtRom from Orange.com. Sometimes it stays at suspend mode, then i have to perform a hard reset to wake up the device. Very odd.
dfens said:
Dear All,
I have had my SPV now for about 4 weeks now and very pleased with it. However, twice in the last week it hasn't responded when I turned it
on and ended up removing and re-inserting the battery. When it comes back, it starts with the "Welcome to Pocket PC" setup wizard and all my data is gone.
Has anyone else had this problem. This problem has happened with both
versions of the ROM.
Click to expand...
Click to collapse
I have had my M1000 for about four weeks too now and although it occasionally soft resets it never fails to respond to the power button. Maybe you have a faulty phone?
On a different note, you say you have Voice Command, I was looking for places that sell it in the UK but it appears to only be available in the US, if you could let me know where you got it I would be really grateful.
Hope you sort your phone out!
Fin
High all
No probs so far
Swiss m1000 installed Programs
Pocket Hack Master ( Overlock your PDA )
Pocket Mechanic ( Clean Defragment and more )
Snails ( adictive Worms(TM) Clone )
Crazy Cart ( adictive Mario Cart(TM) clone
and lots more.
Im overlocking my CPU to 530 MHZ and no Trubbles so far.
Got the thing for two months now, running in this config for about one month.
Peace
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
With Orange Switzerland SPV M1000 I experience the following problems:
1) Bluetooth lights (blue light) and the battery lights flashes even though
bluetooth is not connected and the battery level is fine.
2) Once every other day the device (though fully charged) freezes and I end up doing soft reset.
3) Removing battery already puts the device to soft reset. Orange
4) The activeSync is running without me having to start any activeSync session.
5) Abruptly I get message the memory is full and the device then freeses.
Is anyone having the above problems? How do i resove this?
Many thanks
Swissmate
SteveD said:
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
Click to expand...
Click to collapse
SAME PROBLEM AS THE REST OF YOU WHO HAVE THEIR SPV FREEZED UP VERY OFTEN. IN MY CASE IT'S EVERY 3 OR 4 DAYS, POWER BUTTON AND SOFT REST DOES NOT RESPONDE, SO IT'S EITHER HARD RESET OR SOMETIMES SIMPLY REMOVING THE BATTERY DOES THE WORK. I HAD MY PHONE REPLACED 3 TIMES ALREADY AND STILL THE SAME PROBLEM EVEN WITHOUT INSTALLING ADDITIONAL SOFTWARE BUT WHAT CAME BUNDLE WITH THE ORANGE PHONE. IS THIS A ROM BUG ???
SPV M1000 FRANCE
SD CARD 1 GB
OMEGA ONE BATTERY PACK PRO
OMEGA ONE JOURNAL BAR
SPB GPRS MONITORS.
FORTUNATELY I USE THE X BACKUP PROVIDED WITH THE PHONE TO SAVE MY DATA, BUT IT'S TIME COMSUMMING AND REPETITIVE AS AFTER EACH TIME THE PHONE RESETS ITSELF, I HAVE TO RESTORE IT AGAIN AND AGAIN. :evil: :twisted:
IF SOMEBODY COULD IDENTIFY THE PROBLEM, THIS WOULD HELP A LOT OF PEOPLE LIKE ME
THANKS
RICHARD
There have been frequent reports of this problem- Orange are aware of it, and are replacing M1000's as required. They are currently testing a new ROM, so it appears that they think it may be a ROM problem, though it could also be a batch of faulty hardware.
Another possibility
Turning off the record button seems to have helped, could it be that this is being caught and filling memory / draining batrtery?
3rd phone 3 weeks.
Great when working - anyone using a GPS receiver? Tried a TomTom with an XDA 2 lead is not recognised
Re: Another possibility
BobW said:
anyone using a GPS receiver? Tried a TomTom with an XDA 2 lead is not recognised
Click to expand...
Click to collapse
Remember you have to turn of the IR in settings>connections>beam before a GPS will be recognised.
NeilM said:
There have been frequent reports of this problem- Orange are aware of it, and are replacing M1000's as required. They are currently testing a new ROM, so it appears that they think it may be a ROM problem, though it could also be a batch of faulty hardware.
Click to expand...
Click to collapse
we got almost 30 of these at our work, it seems the only one to have this problem is... my one! so i swapped it for another one and it did the same problem... hmm, they must not like power users, the other users are idiots so they dont really mess about with the settings n all
anyhooz, ill be upgrading all of em to SE very soon and i doubt that rom will have the same glitch...
who knows... now that we can confirm (99%) that SE works on the xda II maybe the operators will now make an official upgrade to SE... they have no reason not to
regards
djrm.net said:
we got almost 30 of these at our work, it seems the only one to have this problem is... my one! so i swapped it for another one and it did the same problem... hmm, they must not like power users, the other users are idiots so they dont really mess about with the settings n all
Click to expand...
Click to collapse
Hmm. That is interesting. Only having one here - and having problems - I do not have much to compare.
Do you think the problem comes from changing the standard settings or using extra software then?
By the way the new ROM does not seem to make much difference in terms of this problem, alas!
Exactly the same thing to me...
Every 5 or 6 days... it goes of for no reason, and the only way to wake it up is to hard reset it! weird SPV... maybe some day a nice guy will come up with a solution to our problem! Hopefully...
:shock:
To keep an old thread alive
Those experiencing issues with this device going into coma (requiring Hard Reset to clear)please would you post detailed accounts of when the issue occurs.
Please confirm power settings, what applications were open on the device and whether the radio or BT was on.
Does the problem occur off or on charge, if on does same problem occur if charged from travel charger not dock?
If off charge, if known - state both internal and external battery charge levels when problem occurs?
What is seen on the handset at point of coma?
Working from soft Reset through battery off to hard reset, what was necessary to restore the device and did soft reset or battery off result in a dump?
Could ROM V's and bootloader V's also be stated.
cheers guy's, together we'll crack it
To keep an old Thread Alive
:roll: I have had my phone from about June last year. The first reset occurred about the 3rd Jan this and two more occurring in the past few weeks the last one on sat 12th Feb
The history as I can recall with the last reset is as follows. I took the phone out from work (cradle) Friday afternoon after 4pm don’t think it was put to charge again before the incident also the phone was not used very often as its a work phone. It was on stand by all day Saturday with the green light flashing but no signal input was being received as I was expecting a cal which never came only to find out the phone was off as mentioned by the caller when I called them. Got home about 530pm with the light still flashing and tried to switch the phone on after finding out no signal was received, the light then went out. Could remember this quite distinctly as it happed on the previous occasion. To activate the phone i have to take the battery and sim card out as with the previous occasion put the card in another/different phone to activate it (make a cal) then put the card and battery back in for the phone to work when it would then go through the reset process. Once working on checking, both battery powers were very low think less than 50% as when i checked some time after they were up to 75%
Am in an office with 3 other users and the only one with this problem and am on my 3rd phone since the year started. It seems to be linked with low battery power (both) and extended stand by when it completely shuts down. Trust this would help to get us a stage further.
i have had two m1000's with this problem,
orangecare stepped up for the replacement and i upgraded the 2nd to win2003se and it still does it!
i make scheduled backups now and have learnt to live with it until my contract expires..
on another seperate note..
Remember you have to turn of the IR in settings>connections>beam before a GPS will be recognised.
Click to expand...
Click to collapse
how do i do this in 2003se?
MORE ON THIS
I had an M1000 that worked fine but a small problem occured and orange replaced it - the new one had this problem every 7 days or so - the bluetooth light was flashing although not switched on and when I try to turn phone on it wont - remove/replace bat and resets - I upgraded to ROM 2.02 from this forum but was using origional orange extended rom and it made no difference - if it is a rom problem its in oranges extended rom
I was on a 166wwe - boot loader 1.06 - dont know radio version but was still happening after DCM 2.02 WM2003SE WWE from this forum with radio 1.18.00 and original ORANGE ext rom so if is on ROM is definatley oranges ext rom that has a problem. - HAS ANYONE HAD THIS HAPPEN WHILE ON CHARGE????
THEY REPLACED MY PHONE WITH A REFURB - ITS NOW FINE BUT IM NOT HAPPY
guys lets think here
were all orange subs so its got to be an orange thing (so unlikley to be hardware) - there are people here (myself included) who have upgraded radio and OS so I am begining to think it is in the extended rom on these machines - has anyone who has replaced extended rom had this trouble - I would experiment but no longer have this fault - I never thought Id wish I could get it back but now I think I can see a resolve
we need an orange customer who does not have this trouble to post extended rom on here for us all to try????? - - - Please ??????
it would be nice to crack this one guys keep plugging on
Had my M100 nearly a year now and after many many resets decided to call Orange as I would have thought this was a known problem with them. But according to technical they have never seen this before!!!
There response was ... backup your data! doh!
I told them I did and it was unacceptable to say this as the thing is faulty it takes over an hour to reload the data and it's happend 4 times since I called them 4 days ago.
:twisted:
PS: has anyone got a copy of the original 1.66 rom as you can no longer get it from Orange.

LED not Flashing for O2 Atom Life

Hi
plz solve me from this problem....
I hard rested my device several times due to programe error while installing 3rd party software. now LED ligh is not flashing. No lights are coming. Earlier it was working.. Green, Orange, Red, Blue , Purple color i saw earlier to indicate different situation...Any body pla help me to solve this problem
[email protected]
Try hard reset again (make sure you are using a stable ROM) and if the LED still doesn't work then it's a hardware problem, not a software problem.
I tried Hard Reset again problem still not solved. ROM using is WWE_RC2140907B2, Radio is AL1_KLNC2340_070905_RS001, ExtROM is EX0926 and Hardware is V7. Is it old ROM information...?
Plz help me
pavisarayu said:
I tried Hard Reset again problem still not solved. ROM using is WWE_RC2140907B2, Radio is AL1_KLNC2340_070905_RS001, ExtROM is EX0926 and Hardware is V7. Is it old ROM information...?
Plz help me
Click to expand...
Click to collapse
try to upgrade ROM or reflash. maybe currupted already else, it's hardware
Not Yet solved
LED display problem not yet solved even though i updated new ROM version of my O2 ATOM LIFE.......
What to do next ....
plz any body help me..............!!!!!!!!!!
Did your Atom Life fall ? Because mine has fallen and since that, the LED aren't working anymore. Try to use your finger to push where the LED are (near the front camera). When I do that 3 seconds, I can see the green led.
I also have a similar Problem but in my case it opposite !! my bluetooth led keeps on forever !!! i had hard reset/ reflashed/ nogo then got it to service as hardware prob the rep replaced the complete board with new imei still nogo any suggestion i can give the o2 guys !!! i think it might be the battery wat say ????
device not yet fell down.... i ried to push the window where the LED is... then also problem not solved......
any other option...........
not fell down.... after reflashing several time this happend... i upgrade the ROM with latest ROM update from the site then also problem not solved
hm. maybe hardware problem
New problem
Now new problem i found on o2 atom life is some time machine is not answering for incoming calls... what may be the reason.... then one more doubt....? 3rd party saftware where we can install in device... in phone memory or in memory card.... i installed most of the softwares in memory cards.. is it because of that....?
plz help me

Dead telephone on Hermes but everything else works

I have a Hermes (Orange SPV 3100 but unlocked). The phone has stopped working but everything else is fine.
I've tried putting other sim cards into it, cleaned all the sim contacts etc with no success at all. As far as it's concerned, there is no valid connection. Phone and data connections don't work. All the Windows settings and programs run fine, it's just the phone that doesn't so I have a pda without a phone! I wasn't trying to flash a rom - the op system is all as original except for the unlock.
I don't think it's worth enough to pay for a professional repair so any suggestions for tracing and curing the problem and hints as to whether its likely to be a faulty connection, faulty parts or software problem?
Thanks.
I have the exact same phone, and similar problem. The difference is my phone is not completely unusable, it sometimes works for a while and sometimes doesnt.
I have just - 10 mins ago - flashed a new radio rom to see if it helps and so far (10 minutes!), so good. But I will need to leave it for a couple of days to see if it works properly.
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Ah well I didnt need to leave it for a couple of days, its not working again even with new radio rom.
Ive tried new o/s, new bootloader and new radio but still the same problem, nothing else to try really ?
(btw: Mine usually has an exclaimation mark next to signal strength.)
Carthief When did the problem first start occurring? Did you flash a radio/OS ROM and it started to happen, or did it just happen out of the blue?
Sorry I did not see this post...http://forum.xda-developers.com/showthread.php?t=562486
I don't know dude. Maybe one of the senior members can help out.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
I will check tomorrow. I am using a different phone at the moment and have left the Hermes at the office.
Hi Shawn, yeah that post covers when my phones problem started - I hadnt flashed anything recently when it started messing up.
I've tried tonight;
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Problem 5:
METHOD 1
But I didn't flash the patched radio.
Phone is working at the moment... I'll update if it is still working or not tomorrow, if its still working maybe Batxda could try it out as well
--------------
Update:
--------------
Phone worked all night, and this morning, but froze up this afternoon and needed rebooting. It's currently working ... but probably not for long! My battery is running out very fast as well.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Batxda said:
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Click to expand...
Click to collapse
Maybe I missed it but I did not see any mention of your doing a Hard Reset. (I assume you have tried soft resets) In general if the problem persists after this it rules out most software issues. I also think it's worth a try because of your comment about the icon being unresponsive.
Mike
Mike
I had done a hard reset but, just to be sure, I've just done it again. After the first it locked up at the password screen so I did a few more. Next, I let the Orange config run through. With the third, I removed the battery before Orange it did its thing. Both the same - no active phone but no lock-up either.
Icons on top bar still not active and x's against them.
When I go to settings > Personal > Comms, the phone icon is highlighted and appears to be "on" (no "x") but the top bar icons still show that it isn't. When the comms phone icon is clicked, the cross appears and the phone is, presumably, turned off and can't be turned on again.
When I go to settings > Personal > Phone, it says that the phone is off, would I like to turn it on. Click yes but it doesn't work.
BTW, I'm using an O2 sim card which works perfectly in a NIKI (touch dual).
I hope this is a software not hardware problem. Is there any point in flashing a new radio or complete windows rom? If so, which one would you recommend (it's a minefield for one of little brain)
Many thanks.
B
I did think you might already have tried a hard reset. In general that tends to point towards hardware, BUT corruption of the ROMs can occur. Unfortunately that is not my area of expertise. Hopefully someone will recommend something here. You could always look on http://www.mrvanx.org/thg/ making sure you have Hardspl installed.
Mike
Hi all, my phone is still not working completely but it does seem to be staying alive for longer periods now.
I have just downloaded the latest (from Oct. 2007) software upgrade from Orange for the Hermes - I think it is windows mobile 5, not sure yet. I cant install it tonight but Im going to try that tommorow.
I downloaded the Orange update but it wouldn't load on my phone. all I got was an error message which said it was the wrong rom for the phone. I don't know whether that's because I've had it unlocked or maybe my rom is newer than the update. anyway, I'm no further forward.
I've just noticed that, in Settings > Device Information, it is blank against the radio version and the Protocol version and that there is no IMEI listed either. I guess that means the radio is corrupted so I will try installing a new one. It is op version 14.123.1.614 and ROM version 1.23.61.4. Which radio is recommended.
What does the missing IMEI number mean or is that also connected with the missing radio?
B
Hi Batxda, I dont know which radio to recommend, mine is Radio version: 1.47.30.10 and ROM version: 3.54.255.3
My phone has now been working for over 24hrs, battery has stayed charged as well... so I haven't installed the Orange rom yet.
I bought a new phone having pretty much given up on this one... and now it seems to be working again!
Nope. Not working. Ran for over 48hrs but locked/froze up today with calls going straight to answerphone, battery drained from 70% to 20% in about two hours as well!
My last attempt is going to be running the phone with no memory card in, and no sim card with phone disabled. Will report back.
Have you had any luck Batxda ?
Radio flashes all lock up - help please
carthief said:
Nope. Not working. ...............
Have you had any luck Batxda ?
Click to expand...
Click to collapse
Sorry to hear that. I've had different but similarly unsuccessful times. I hope your experiment goes well.
I flashed with HardSPL (SPL-2.10.Olipro) then tried to flash a Radio.
1st I tried v 1.11.00.00 running from the PC. It froze so I had to unplug it. That messed everything up and I ended up with it stuck on the bootloader screen (Type 2a) so I used mtty and found that command "set 16 0" worked so I could return to WM5.
2nd I tried to flash radio v 1.47.00.10 from the SD card. It started OK, got to about 20% and stopped. That was at 11:15. Its now 13:30, 2.25 hours later and it hasn't moved in that time. I am going to have to stop it but I'm sure it will end up corrupted again.
H E L P anybody, how can I flash a radio to this damned thing?
BTW, it is a Hermes 100.
B
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
carthief said:
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
Click to expand...
Click to collapse
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) & if you did, here's what I did to get the phone working again.
I removed the battery & pressed hard against the back stainless steel plate especially around the area near the battery contacts. It worked for mine & the No GSM issue would go away. If it happened again, then I repeat the same procedure & it works again.
My conclusion is that the GSM chip has broken or loose contacts with the motherboard so as long as the contacts is good, that keeps the radio working. BTW, this phone was dropped before & after that, this issue started happening.
Lastly, I'm not sure if your issue is really with the password...that's just a symptom of something else that is wrong with the system...not sure if it's entirely software or perhaps hardware or combination of both.
konker said:
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) ...
Click to expand...
Click to collapse
No, I haven't seen that message.
Since the last post, I've tried to flash various radio roms, two WM6 roms and what XDA says is the original WM5 Orange SVP M3100 rom for my phone (v slightly different version number though). All of them hang at around 11% or give an error message. I've ended up with a Dopod start screen (from one of the WM6 attempts) and a funny mixture of colours but I can still start Windows so I've got a pda with no phone access.
Taking your message on board, I'm starting to think that there is a hardware fault preventing the radio from being recognised. That is unless there is something fundamental that, being a n00b at this, I'm not doing. I've put Hard SPL on the phone, flashed roms and failed, reset it with MTTY (set 16 0) and used a variety of radio and main roms. Is there anything else I should have done?
I'm about to give up and see what it's value is and then see if I can get a hardware repair (if it's worth it). Otherwise, I've heard that some fetes have a throw the mobile competition ......... !!!!!!
B

need of some serious help

hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.

[Q] my htc hd2 t mobile

since i got my phone 4 month ago i been having a problem with it ,even i did the upgrade sometime it stuck on the orange window screen ,so i have to take the battery out and wait for a 5 minute ,then everything will work for a while ,is there any solution? .
please
thank you in advance
mohamadsalame said:
since i got my phone 4 month ago i been having a problem with it ,even i did the upgrade sometime it stuck on the orange window screen ,so i have to take the battery out and wait for a 5 minute ,then everything will work for a while ,is there any solution? .
please
thank you in advance
Click to expand...
Click to collapse
Have you tried other steps besides the battery removal? (By the way, the reset button is just below and to the left of the battery. It is a small yellow or red dot. Though removing the battery may be faster, you risk damaging the contacts each time you do so.)
You might try doing a hard reset. This is the one that wipes your phone's memory and will delete everything you've added including contacts and applications. To get your contacts back in a hurry, sync with Gmail before your hard reset and again after. I keep all of my cabs in a folder on my microSD card for getting my apps back faster after a flash.
If the issue continues and you want to keep you phone stock (i.e. under warranty), you should contact T-Mobile and ask for assistance. They will suggest a hard reset and then probably just a hardware warranty exchange.

Categories

Resources