Video streaming using bt stereo headset - P3600 General

I just bought the jabra 320s bt stereo headset.
I am using tcpmp to watch movies on my trinity , but when I use my jabra the picture does not run fluently, the picture stops and jumps and all the time.
When I use the original headset that came with the trinity the picture runs perfectly.
Is there a way to fix it?
Maybe a different player will run better?
Tnks
Dror

No one???

Did you turn up the bit rate and sample frequency?
I stream audio to my bluetooth carkit and i noticed that when i adjusted the bit rate and sample frequency in the registry to a higher value the media player starts to produce hick-ups in the music. So maybe you could lower the bit rate. Downside is that this will reduce the sound quality.
arjan

Related

Can someone recommend a solution for this BT audio need?

I want to "cut the cable" and stream audio from my JAMin to a set of lightweight BT headphones while I workout.
I have a JAMin but I have not bought any BT headphones yet.
Primarily I use the Mobile Slingplayer and TCPMP to watch videos (mostly with mono audio).
I have seen the hacks for A2DP but I worry that the processing overhead required for A2DP will kill video performance and also that the Slingplayer and TCPMP don't stream over this profile (from the postings only WMP seems to work?).
Would I at least be able to get mono audio working wirelessly while watching video? Which BT headphones would you recommend for this?
Thanks in advance.
A2DP hack available at this site accept audio stream from any programs. Windows Media Player mentioned as only one program which support remote control functions like Play/Pause, Fwd, Bwd. Prophet performance good enough to watch video with stereo over A2DP. I don’t know about Slingplayer and TCPMP my preference are different, but my experiences with SmartMovie are successful to watch video with stereo audio.

A2DP High Frequency Noise

Does anybody find that when listening MP3 through Bluetooth stereo headset, there is high frequency noise follows every voice of the song, however this high frequency noise does not appear when slience. I am using PocketMusic 4.2.6 and using Nokia HS-12W Bluetooth Headset, I heard some other Atom users' iTech R35 and other Bluetooth Headsets also have this problem.
turn off equalizer
Both equalizers of PocketMusic and Atom have been turned off, however the noise is still existing.
I've got the same poroblem, but I'm using a wizard/8125 with Globesat bth-820.
I also got the same problems with a K-Jam and a Motorola HT820.
I guess it is a problem with A2DP and some headsets.
And maybe it's the cause that the patch isn't officially released: They are afraid of the support towards their clients.
It doesn't bother me very much.
I tried
1. i-Tech S35
2. Gobalsat BT-830
3. Nokia HS-12W
with equalizer off (on/off don't have any effect) using WM10, TCPMP. High frequency noise apeears all the time when listening to music. See the following thread as well:
http://forum.xda-developers.com/viewtopic.php?t=51162&sid=5d6de77e7db8bb9429d8d09f1633a5bc
I followed the instruction from this post to change the registry
http://forum.xda-developers.com/viewtopic.php?t=54621
almost 99% high frequency noise has been eliminated. Go ahead to try it.

Initial A2DP findings

Using the M3100 with the itech clip S35 Headset
firstly i've been using the fit4cat tweaker which has an A2DP quality improvememt tweak - unfortunately the tweak makes the quality worse so i've tuned it off and the music quality is not too bad when playing through my car stereo. However, I need to try some decent headphnes with the unit because the ones supplied sound very tinny!
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Thirdly, I have the S35 outputting through my car stereo. When people are calling me they can hear an echo (of themselves speaking as the sound comes out through the car speakers). There is some sort of delay i suppose but this is very annoying. I'm not sure why its happening because when I tried the headset using my Sony Ericsson W800i there was no such echo!
therfore, is the echo problem an A2DP thing (as the w800i does not support it and this works ok) or is it a m3100 thing? To test this I could turn off A2DP and ry the headset again - is this possible?
any suggestions appreciated
I have the Jabra BT620s headphones and I have indentical problems.
After install all works well but as soon as you disconnect media player just plays via the phone speaker
at least you guys get it to work once. WMP never plays through my iPAQ bluetooth headset. AVRCP controls work fine though. TCPMP plays fine through the bluetooth headset as long as I pair it up before I execute TCPMP. This is exactly how it worked with my 8125.
The WMP issue is very strange and is likely yet another example of the lack of QA testing in the A2DP portion of the TyTN's implementation. I would expect that these issues will all be fixed in a subsequent TyTN ROM update.
I'm getting on ok with this
quality is pretty good both using the headset with my own sony ear buds. Vast improvement over the itech supplied ear buds.
A2DP - no skipping during normal playback and it works well - quality is not an issue through the car stereo either - not bad at all . I've even been listening to music over A2DP and running sat nav using a GPS BT receiver. A slight pause in music when GPS connects but then all runs well.
My only 2 gripes are:-
1. When you disconnect or go out of range of the headset, it reconnect perfectly with the phone application. This isn't the case with the wireless stereo. I have to enter BT settings, uncheck the wireless stereo setting, save then recheck the setting before it reconnects. Slightly annoying but accesptable (for now)
2. the echo using the headset through my car stereo. People calling me can hear themselves again (about a 0.5 second delay) through the car speakers! Just to repeat my earlier post, this does not happen with my W800i. not sure if its an A2DP problem or something else.
Similarly here, I don't seem to be able to make A2DP (and the handsfree profile, for that matter) work.
Using HTC and an Itech clip, I am able to pair the "wireless stereo" and then play music for some 10 seconds on the GS Player, after which the Wireless Stereo symbol disappears from the top bar and the connection is interrupted. I actually believe that the Itech clip is 'shut off', as I have to turn it on again.
When I try to reconnect the headset, it just won't work and the whole machine is slowed down. Only a soft reset helps.
I hope this is a ROM problem (and not mine) and it'll be fixed soon...
WMP and the Itech clip work fine for me, with the current German ROM.
a2dp issues w/th Hermes
With the CHT9000 WWE rom I had the wireless stereo drop off after about 1 minute, then I would have to reconnect. I flashed to the other dopod WWE ROM (latest) and the problem is gone....sound is comparable to my prophet. Reg tweaks suggested in other forums definetely make the sound quality worse for either ROM version. I think further updated ROM's will improve A2DP reliability (or someone may find a reg hack)...as with the prophet A2DP it just takes time.
Hi guys, I've got the vario ii and the Sony Ericsson HBH-610.
I can add the headset fine and make calls through it, but I don't know how to get the music in wmp to play through it.
If anyone has a few mins spare and could explain it for me I would be really grateful
Headsets..HBH 610...
With my CHT 9000 I use an OMIZ 5660...works great for calls and wireless stereo. I don't have any other headset to compare it to (since I only have used this brand)....I believe that if your "options" do not list wireless stereo then you can't use the A2DP function on your device, at least as it is designed to be used.
I'm not aware of a one-piece headset that supports A2DP that is available (all should have either 2 headphones or two wired ear plugs)..
THE ONLY WAY, I FIND :
I have a 590A Plantronics Bluetooth HeadSet
You must refresh Services of your iTech or your Plantronics !
Go Parameters, Bluetooth, Select your Headset, Refresh.
Then reselect services and Save !
Each time you lost the link (Bluetooth turn off or ...) you will have to Refresh,reselect and Save !
I am searching for a Solve but not find another !
I forget something else !
It is the same thing with my Bluetooth GPS (GNS).
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
So far A2DP has worked fine for me with my Nokia HS-12W. I have applied some registry settings and optimised my SD card and so far it has played with hardly a skip. Definitely better than my previous BA with WM5.
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
hutton118 said:
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
Click to expand...
Click to collapse
This is probably headset dependent because with my Nokia HS-12W if i need to reconnect i just press the Audio button and it re-establishes the A2DP connection. No going to BT settings at all.
Interesting, can you just confirm what you mean by the Audio button. Is that just hitting 'Play' in WMP?
Thanks
No, the Nokia has a Music key (not Audio, my mistake) which switches from A2DP to the built-in radio. So if i have lost the BT connection pushing the Music key to select the Audio player will re-establish the connection and music is streamed to the headset. You will see the A2DP icon on the today screen when it has connected and get the chime in the headset.
Ok, thanks for that.
Just one last point, if the connection is lost while music is streaming, does the audio switch to the phone speaker instead??
My problem is I'll be listening to music on the subway then or some reason I'll loose the connection (interferance, low battery...whatever) and immediately music starts coming out the speaker, much to my embarrassment!
Thanks again!

A2dp tcpmp video audio out of sync

hi,
i have a g4 wizard with it's original rom. i got the a2dp and avrcp working with the a2dp addon from aku 3 rom. quality is good with music playing with pocket music player with no skips using bitpool at 48. im using the itech clip radio. but playing an .avi video with tcpmp the video and audio is out of sync. the video is 320 x 240 res., but the audio is a sec behind. when playing the video using a headphones connect to the phone's plug or just using the speaker it plays fine. i thought it may be the head set, but my other bluetooth stereo headset does the same thing. is the wizard's cpu too slow to run the video and a2dp at the same time?? my wizard is at 240 Mhz.
What worked for me was this:
To fix the problem with audio/video sync you have to:
1) overclock the kjam to 216mhz
2) use TCPMP and go to Options - Settings - Advanced - Manual A/V offset - change it to -450 msec.
With those settings all my video is back in sync.
If you then want to watch video through the inbuilt speakers you have to set the offset back to 0.
The milliseconds might be different for you but it's trial and error.

Can anyone try A2DP?

I was wondering if the audio quality and sound stuttering has improved by using BT stereo headphones with Blackstone...
I have a trinity and i still haven't found a setting nor a rom nor a BT stack which handles my samsung headphones with a decent quality and no stuttering...
My cheap nokia 6234 has a solid connection and a good quality sound compared to the trinity... Plus, the A2DP connection slows my device down so much you have to pause if you want to do anything with it...
So if anyone could report about using bluetooth headphones with Blackstone, I would be very grateful as that would help me decide whether to buy or not
Thanks a lot
--
Fra
Great
I have the Touch HD for a few days now with the BH S100 HTC bluetooth headset. I have to say that the sound quality is great. It is even better than my conventional mp3 player.
Stable, never lost connection, etc.
Hope this helps.
I tried it today, with my Sony-headset.
It seems to stutter, though, for the five minutes I tested.
I have the Blackstone from seven day and the A2DP is OK with my Sony_Ericsson HBH-DS200.
The sound is very good and the pairing with the phone is immediatly in about 1 second.
Regards
reasonably OK with my Jabra BT620s. However, quality in BT A2DP is not really comparable with wired headsets, and i got some losses when passing nearby EM sources like wifi, etc.etc.
I needed to enhance the quality with Schaps Advanced Config Tool.
Alpine radio
I have an Alpine radio with bluetooth capabilities in my car, and for the first time I have a great connection with my HD. My Touch Diamond stuttered.
Thanks a lot everyone!
I guess it depends by the headset model and interferences then...
I'm still looking for a shop which would make me play with it for a little while...
i have a pioneer deh 700bt and the headunit set up was easier than the nokia n95
streaming music was a bit weird, the quality was very weird, kinda like very low bit rate streaming on mp3s at times, then fine again.
my n95 music used to pause when i took the key out of the ingnition and the stereo turn off
however the HD just keeps playing, but not through the speaker phone....just see it still playing
bit disappointed, and looking for a fix
I've only played for 10 mins, so i'll let you know if i find some more.
I have an Audi A3 from 2005 with a original BT carkit.
Can I use my HD to play some music ?
I can make phonecalls without a problem, if I adjust the volume of my carradio the volume from the HD is also adjusted.
But is there a possibility to play some music ?
Has anyone tried the Plantronics 855 Voyager stereo headset yet?
Also, I'm currently using the Jawbone 1 and noticed horrible interference/noise in the ear piece when the wifi is on, anyone else experience this?
I've never had any problems with the diamond and now with the hd. Like the senior man said, you need to increase the bluetooth bitpool values either in the registry or by using schaps tool. The difference in quality is immense - low values will make high bitrate music sound 64 kbps so you need to change this. Of course, the higher the bitpool the more chance of dropouts but I run at 60 and rarely, if ever have any dropouts.
Sennheiser MM200
Now if tested for almost one day my HD with my new Sennheiser MM 200. Amazing!!! The use of the MP3-Player switched with the use of the remote control to a new level. During sport display can be switched off(no need for touch display-less power consumption (try to give a more compareable info in future)), full control of play/pause/fwd/rwd/volume function. There is no delay of the HD in using the remote nor any transmission interruptings. Now the HD is with armwrest a perfect sport companion. The sound of the earphones - haven't had any better sound (and i've tried a lot of earplugs). Neckstrap fits perfect, mic in perfect position, clear speech and due to perfect noise reduction of the plugs even in noisy areas perfect understanding.
The Sennheiser was just charged the first time - i'll report the stamina.
So far -
I am using the i.Tech S35 bluetooth clip also on my HD now, and sound is very good, with WiFi on. Advantage of the clip is that one can use any headphones with it.
http://dontknowme.at/http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02041
Louis said:
I have an Audi A3 from 2005 with a original BT carkit.
Can I use my HD to play some music ?
I can make phonecalls without a problem, if I adjust the volume of my carradio the volume from the HD is also adjusted.
But is there a possibility to play some music ?
Click to expand...
Click to collapse
no ... thats just working with A5
(is trying too much effort?)
Louis said:
I have an Audi A3 from 2005 with a original BT carkit.
Can I use my HD to play some music ?
I can make phonecalls without a problem, if I adjust the volume of my carradio the volume from the HD is also adjusted.
But is there a possibility to play some music ?
Click to expand...
Click to collapse
It's not possible to play music, only phone functions are available.
I've tested the HD with the PARROT MK6000 and everything works very fine, also A2DP, Quality is good.Phone Functions great, Phonebook synchronize works perfect

Categories

Resources