My new motorola heade seat say the passcode is incorect the 0000 Neeed Help to solve the problem please and if Any one Know how to enable Stero to her music in th HTC phenes better
Thanks
[email protected]
Motorola H350
rtfm
have you tried to read the manual? If it doesn't work, you might try 1111 or 4444
or 1234 works for some headsets
Thanks but is not that I have't reed the manual it looks that my phone some way re map anothe code isede the headset onece is programed... but I don't kow what code is now...
the code cannot be changed....well i couldnt on my 3 Headsets
Related
I'm trying to pair my XDA II with an Anycom Bluetooth print module. I can't get buy the pin. It doen't have one. Does anyone know how to get by that page without entering a code. Is there a setting somewhere that I have missed that turns off the need for a pin?
Dave
It should have a pin, read the fine manual again
If not, try 0000
jpiek said:
It should have a pin, read the fine manual again
If not, try 0000
Click to expand...
Click to collapse
Nope...I already tried that. There Bluetooth carkit uses that pin but this one doesn't.
Dave
Then you will have to read the manual again, there should be a PIN...
jpiek said:
Then you will have to read the manual again, there should be a PIN...
Click to expand...
Click to collapse
You can only read 3 3"x4" tinny little pages so many times. I'm waiting to hear back from Anycom.
Dave
A f*cking manual, by all means :twisted: :roll:
I want to pair my mda2 withj device that has a unchangeable alphanumeric Pin
X01-03882-02
but it allowes to type in numbers only .
Anyone has an idea ??
LOOK FOR TOWAS patch
Just go to this link, download the patch and its fine, this one will allow you to type characters as well as numbers
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
Works for me
Thank you, works with Characters.
But PIN i thought for MS mouse is not working.
busch, have you tried 0000. You have a mouse on your pda??
XDAII
HI I HAVE BT HEADSET AND BT GPS WHICH ARE SET AT 0000 DEFUILT AND THAY ARE CONFLICTING IS THERE ANY WAY AT ALL IN CHANGING THEM. BEEN IN TOUCH WITH MANFA AND THAY HAVE SAID THAY ARE SET DEFUILT AND NO WAY OF CHANGING THEM CAN ANY ONE HELP ME PLEASE THANKS AND IF SO HOW DO I DO IT CHEERS
can this programme be run using xp as i get a not a valid win32 application when i try and run it
Mucker, in what way are they conflicting, I have used GPSmart gps and a bluetooth headset together with both having the same code 0000.
XDAII
i have leadtek gps and jabra bt 200 headset and i pick up a lot of interference and some time the gps wont bond if headset is on i just need to change passkey on one of the items, is there any way of doing this please
cruisin-thru said:
busch, have you tried 0000. You have a mouse on your pda??
Click to expand...
Click to collapse
I tried 0000 but doesnt work, mean I must type in nothing, so it works at XP .
But botton for pairing on PDA is enabled if I type in nothing .
Is there a solution ?
I dont wil the mousr work on PDA, only the mousr buttons.
Dont knoe if this is possible, but 1st I must pair it.
Did you download the patch posted in the earlier text.? The number contained within a bluetooth hardware item cannot be changed as it is contained within the hardware/firmware.
i dl the patch. and it works to give in alphanumeric pin.
but i think device has no pin (HID) .
but on MDA2 the button for pairing ( the right one on the sire where u give in OIn ) is enabled if there is no PIN given in.
thats my problem now. How to pair without a PIN.
I have had my jam for over a year. I am not sure if initially i set up a auth code for bluetooth. I have recently purchased a blutooth adapter for my laptop and would like to be able to run active sync via bluetooth. I have tried all of y usual codes and no code at all and have had no luck. Please help.
Thank you.
had the sam problem with a gps reciever. When it asks for a pass code press cancel. It works evry time for me
What are the "usual" codes that you have tried? I assume "0000" was one of them?
I hae tried all of usual 0000, 12345 and any code that I would usually create. I have also tried to cancal out of the message and it cancels the pairing.
Anyone have any other ideas?
Have you tried 9999? That's what I used as default when pairing to a Nokia using an FTP profile.
Also try 1111 and 8888
unless i mis-understand the problem,
you select the code you want to use for both items eg 1234 at both ends,
so you type the code at one end, then type the same code at the other to pair them.
the only items that normaly have a preset code that i know of are bt gps receivers and bt headsets.
Yes that is the way that I also originally uunderstood it. I typed the code I wanted on one and then the same code on another. Still didn't work. Oh well... i will just take the bluetooth adapter back and stick with the sync cable.
Thank you all for your help.
Before returning your BT Adaptor back, you may want to check if the adaptor itself has a default code that you would need to input in your magician when asked for it.
Hello there, I have just brought 4 of these from a taxi company who have gone bankrupt they come with a mercury bluetooth crade and a wired gps receiver UT-41(i believe). I have tried unlocking one using software and all goes well everything copies but when its suppossed to give me a code but says code is your code. SO when asked for the network unlock code I dont know what to type in? Do I need an orange simcard in there at the time of unlocking?
The next problem is that the bluetooth cradles have a password to pair them and I do not know what this is. I beleive the whole system may come from MERCURY. Does anybody know of how I can get the bluetooth code for this device(mercury m600 bluetooth cradle) or how I can bypass the password to use the gps receiver. I can provide pictures if whom requests.
Please get back ASAP
Paul
attitude said:
Hello there, I have just brought 4 of these from a taxi company who have gone bankrupt they come with a mercury bluetooth crade and a wired gps receiver UT-41(i believe). I have tried unlocking one using software and all goes well everything copies but when its suppossed to give me a code but says code is your code. SO when asked for the network unlock code I dont know what to type in? Do I need an orange simcard in there at the time of unlocking?
The next problem is that the bluetooth cradles have a password to pair them and I do not know what this is. I beleive the whole system may come from MERCURY. Does anybody know of how I can get the bluetooth code for this device(mercury m600 bluetooth cradle) or how I can bypass the password to use the gps receiver. I can provide pictures if whom requests.
Please get back ASAP
Paul
Click to expand...
Click to collapse
ASAP?
When you SIM unlocked the devices you should also be provided with the unlock code
concerning the BT Headsets, mostly it's just 0000 or 1234.
ASAP enough?
No, the phones are locked to orange I am trying to unlock them, with lokiwix(i think its called that) but it says code is your code.
ANd there not headsets it is a bluetooth cradle which you put the prophet in and then you pair them up but I dont have the password. Then the wired gprs receiver plugs into the cradle via like a telephone port socket
interested
If you get stuck I'll take one of them off you for £50 inclusive. Its all I've got to my name but i thought at least i would offer.
lol, I brought them for that much mate.
Just to let you know I have unlocked them all now, But the problem with the bluetooth cradles still persist, help will be appreciated
Right I heard there is a process called Bluetooth Cracking/Eaves Dropping
This process sounds good for what I need to do.
I need to connect and pair up a bluetooth device(being the bluetooth cradle) in which the gps connects to for it to recieve the satellites.
But I dont know the password so I need to pair and connect the devices without using the password?
So how do I do this
@attitude
Can you please tell me how you unlocked the handsets. I acquired one of these a few days ago and have exactly the same problem - "unlock code is your code" using lokiwiz03. Tried it twice without success.
Best regards
Yeh all of the files within the util folder, copy them to your pda (my documents folder) via active sync or what ever you use. From this, on the pda run the file 'CERT_SPCS.cab' it will then ask you to install it, just click yes and install the program. Next, again from the PDA, click 'EnablerRapi.cab' (not the .bat file, but the .cab it should say next to it in file explorer summet lik 76KBs) and let this install aswell. After this has been done ony your pda, go back to the computer connect it up via active sync and wait for it to synchronise. From this, then go and run the 'LokwizMSL.bat' it will go through everything this time with the files succesfully coppied and will give you your unlock code. (note this down or leave it on the screen)
Take the battery out of prophet and insert your simcard that is not available on the network, enter your pin as normal if you have one, it will then ask for an unlock code, enter the code that 'LokWizMSL.bat' produced. then click unlock at the bottom, it wont unlock it first try and the screen will just appear again, type the code in again click unlock and it will go to the today screen and search for your network. It may take a while to find depends on network. Then voila it will be unlocked
Let me know how you get on though mate
@attitude
Many thanks for quick reply and clear instructions. All unlocked and working.
Best regards
hi
I know that this thread is very old, however I thought it's worth updating
If any one is having problems with finding password for MERCURY car holder + Bluetooth receiver (UT-41) for spv m600 / htc prophet etc then:
DO NOT try to pair it via windows on your HTC
just connect all wires,
turn cradle on (plug it into lighter socket)
find and install GpsGatePPC.ARM.CAB on your device
and connect with GPS receiver via above programm
it does not ask for any password !
works like a charm
I cannot get this thing to pair with the HD. the pass code of 0000 is not accepted. No pass code works on the first part but then the second part it will not allow me to leave the the pass code field blank. It fails every time.
Does anyone else use the I.Tech Clip D and how did you get it to pair?
I am using Dutty's 3.4 ROM on a Telestra 8285.
marksm said:
I cannot get this thing to pair with the HD. the pass code of 0000 is not accepted. No pass code works on the first part but then the second part it will not allow me to leave the the pass code field blank. It fails every time.
Does anyone else use the I.Tech Clip D and how did you get it to pair?
I am using Dutty's 3.4 ROM on a Telestra 8285.
Click to expand...
Click to collapse
Use pairing code 8888
Go through the user manual of your BT headset.
It will have some options for A2DP pairing - e.g. Press and Hold a button till indicator light changes (e.g Jabra has this). Now with the BT headset in A2DP pairing mode, pair it with your HD.
(First delete(clear) all pairing from your headset and also HD if above still doesn't work)
custardo01 said:
Use pairing code 8888
Click to expand...
Click to collapse
Thank you, thank you, thank you....
(iTech clip R35)
brgds
Royan
custardo01 said:
Use pairing code 8888
Click to expand...
Click to collapse
Thank You VERY much. I looked through the manual and I either overlooked that or it isn't in there. It is working now. Thanks.
the code is in the manual.... i had to d/l a version the other day as i couldnt remember the code
fards said:
the code is in the manual.... i had to d/l a version the other day as i couldnt remember the code
Click to expand...
Click to collapse
That's what I did for the Clip R35, but the manual said default code was '0000'. The real default code was '8888'...
brgds
Royan
watch for external gps com port reservation!
I searched the forum because i thought i have forgotten the passcode but after various attempts with 0000 and 8888 i found out that was the external gps reservation of com port 6,7. Set external gps com port to none fixed the problem ant d-radio is now connected.
Hope this helps someone.