Database Users

Bluetooth alphanumeric PIN

I want to pair my mda2 withj device that has a unchangeable alphanumeric Pin
X01-03882-02
but it allowes to type in numbers only .
Anyone has an idea ??

LOOK FOR TOWAS patch
Just go to this link, download the patch and its fine, this one will allow you to type characters as well as numbers
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
Works for me

Thank you, works with Characters.
But PIN i thought for MS mouse is not working.

busch, have you tried 0000. You have a mouse on your pda??

XDAII
HI I HAVE BT HEADSET AND BT GPS WHICH ARE SET AT 0000 DEFUILT AND THAY ARE CONFLICTING IS THERE ANY WAY AT ALL IN CHANGING THEM. BEEN IN TOUCH WITH MANFA AND THAY HAVE SAID THAY ARE SET DEFUILT AND NO WAY OF CHANGING THEM CAN ANY ONE HELP ME PLEASE THANKS AND IF SO HOW DO I DO IT CHEERS

can this programme be run using xp as i get a not a valid win32 application when i try and run it

Mucker, in what way are they conflicting, I have used GPSmart gps and a bluetooth headset together with both having the same code 0000.

XDAII
i have leadtek gps and jabra bt 200 headset and i pick up a lot of interference and some time the gps wont bond if headset is on i just need to change passkey on one of the items, is there any way of doing this please

cruisin-thru said:
busch, have you tried 0000. You have a mouse on your pda??
Click to expand...
Click to collapse
I tried 0000 but doesnt work, mean I must type in nothing, so it works at XP .
But botton for pairing on PDA is enabled if I type in nothing .
Is there a solution ?
I dont wil the mousr work on PDA, only the mousr buttons.
Dont knoe if this is possible, but 1st I must pair it.

Did you download the patch posted in the earlier text.? The number contained within a bluetooth hardware item cannot be changed as it is contained within the hardware/firmware.

i dl the patch. and it works to give in alphanumeric pin.
but i think device has no pin (HID) .
but on MDA2 the button for pairing ( the right one on the sire where u give in OIn ) is enabled if there is no PIN given in.
thats my problem now. How to pair without a PIN.

How do I find the Bluetooth authorization code for Jam

I have had my jam for over a year. I am not sure if initially i set up a auth code for bluetooth. I have recently purchased a blutooth adapter for my laptop and would like to be able to run active sync via bluetooth. I have tried all of y usual codes and no code at all and have had no luck. Please help.
Thank you.

had the sam problem with a gps reciever. When it asks for a pass code press cancel. It works evry time for me

What are the "usual" codes that you have tried? I assume "0000" was one of them?

I hae tried all of usual 0000, 12345 and any code that I would usually create. I have also tried to cancal out of the message and it cancels the pairing.
Anyone have any other ideas?

Have you tried 9999? That's what I used as default when pairing to a Nokia using an FTP profile.

Also try 1111 and 8888

unless i mis-understand the problem,
you select the code you want to use for both items eg 1234 at both ends,
so you type the code at one end, then type the same code at the other to pair them.
the only items that normaly have a preset code that i know of are bt gps receivers and bt headsets.

Yes that is the way that I also originally uunderstood it. I typed the code I wanted on one and then the same code on another. Still didn't work. Oh well... i will just take the bluetooth adapter back and stick with the sync cable.
Thank you all for your help.

Before returning your BT Adaptor back, you may want to check if the adaptor itself has a default code that you would need to input in your magician when asked for it.

Anyone got Sim Access Profile working?

Hi
I wondered if anyone had successfully used the Sim Access Profile capabilkity of the of TyTn to connect with a Bluetooth car kit. I'm trying to get the connection going with a Merc. car kit, but I can't get them to pair.
Thx

Hi petes, I have an slk 55 amg with command and bluetooth. The bluetooth in the command system does not work for pairing with a phone. Even though it says it has bluetooth. To use bluetooth you need an extra module.
Hope this helps...
http://www.benzworld.org/forums/r17...y-arrived-but.html?highlight=bluetooth+module
http://www.wireless4mb.com/phones.html
http://www.benzworld.org/forums/r17...pic-seems-kit.html?highlight=bluetooth+module

Hi Dale
Thanks. I actually already have the module - the european version of the module is different to the US one in that it uses Sim Access Profile, rather than just acting as a headset. The TyTn says is supports SAP, but I just can't make it work - wondering if anyone's actually got SAP working.
pete S

Hi Petes,
I also have an Mercedes-Benz with the european bluetooth module. But I have a Qtek 9100 updated to AKU2 (Which is supposed to support SAP), but no luck at all. Actually the module can not even identify my phone and display it at the search screen of the comand screen. I tried also with a NOKIA 6230i (SAP Compatible phone) which actually I was able to see at the search list of the comand screen which means that the module is working with SAP compatible phones. What I will do next, is to try again with the new firmware I installed to my 9100 (T-Mobiles 2.21 Version) which has a SAP application for bluetooth (Something like SAP Server).
I can not do it yet because I am abroad and I will be back again 1st of September. I will let you know the results ASAP.
If you have any news from your site with TyTn please let me know because I was intending to change my 9100 to TyTn just for the SAP functionality.

Hi Barsam
The reason you can't find the 9100 when you search with the BT module is that it only looks for devices which identify themselves as Phones. The TyTn (and no doubt the 9100) identify themselves as Pocket PCs and so the (stupid!) Mercedes kit ignores them. The good news is that you can hack the registry to tell the Bluetooth stack that it's a phone. The bad news is that you can't pair with it. Getting it into the search screen doesn't mean it supports SAP - I could see my old T68 just when I was testing. Could you actually pair with the 6230i - i.e. when you see it in the list select Call?
When you're back, PM me and I'll send you the hack.

To tell you the truth I didn't try to pair the 6230i, but it's one of the phones that mercedes have tested on the bluetooth module. If I don't manage to do it with the 9100 I may get a 6230i. At least I can use the one that my brother has to test it and even copy my contacts to comand. Have you tried the hack with the TyTn? Can you tell me what is the the registry set to do that?
Where did you find out that the bluetooth module ignores enything elese than phones?

Make the following registry change
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS]
"COD"=dword:52020C
On your own head etc.. Keep a copy of the current value of course. Then do a soft reset. You'll then see it as a phone. I've tried this, and can now see the phone, but can't pair. I've had a mail back from HTC that they're aware of some problem with the SAP and are working on it.

I wish a nice car kit would be released in the USA that supports SAP/850 & 1900/ external aerial...

hello,
i'm trying to get my TyTN working with my Meceder Command too... does anyone tried the English ROM-Update? Someone wrote that he can use it's TyTN with his Audi after updating the ROM. And tha Audi-MMI-System works also with SAP... perhpas after the ROM-Update it works with Mecedes Command System too...

I haven't tried it yet - I've been waiting for the TyTn update to come along, but nothing from HTC yet. If I don't get anything soon, I'll switch over to the iMate ROM and report back.

I have used a nokia 6233 6280 onmy E55 2005 with B/t Module
The mercedes module in conjuntion with the command system is problimatic, hoever I think I have another peice of the puzzle. With both the above phones they only worked using Vodaphone 3g cards Three 3g cards paired using SAP however could not get recieption....Mercedes say (there guessing) its the way the sim card is configured.....

Mercedes BT
I have a TYTN on order and Im desperate to find a solution to the issue before it arrives.....
As a follow on to my last post ...basically what I THINK found out was if the sim card was configured to work only on a 3G phone..(some networks do this so that they cannot be put in a 2.5g phone and constantly roam on).....then it would pair with the Bluetooth module in Mercedes however never get recieption.
I tried this on several phones including 6233 6280 N80 E61.....just to name a few....ALL PAIRED....however If I put a Vodaofone 3g Card in then IT worked .....IF i put a Three 3G card in it didnt.....BUMMER CAUSE I'm with THREE.....
I hope this helps in some way and Im more than happy to be corrected however these are my first hand expeirnces....I WANT TO USED THE TYTN in my MErc so Im keen to help in amy way....I have unlimited access to phones...so if anyone has any other suggestions Im happy to give it a go....
Mark

At the moment, you'll find that by default the merc kit won't even see the Tytn (it's a pocket pc, not a phone as far as Bluetooth is concerned). You can hack the registry to change this, but then the phone will be seen, but pairing will fail. Hopefully, the forthcoming firmware update will fix this - I've had mail back from HTC support to suggest they know there are problems with the SAP support.

Mercedes BT
Is there anyone who had paired Nokia phones with Mercedes BT(euro spec) successfully? I had tried for several Nokia phones (6230i/6270/6280) to pair with BT ,all failed. I can just find the 16-digit PIN on Comand, no phone appears on Comand. Phone & Comand can't find each other. Do I have to set other setting except the "bluetooth setting" for mobile phone? Even I try to "search for audio enhancements" and 'find no devices' at all .

Thanks Petes,
Did they give any idea on time frames?...Did you have any thoughts about my experience with the different sim cards....
Mark

I am considering buying the HTC TyTN and the Merc Bluetooth module so I am very keen to know if anyone can get this working.
Thanks,
Ady

Nope - no news on timescales I'm afraid - just waiting for the firmware update from HTC. I'm reluctant to try the iMate firmware at the moment - until there's an HTC to go back to in case something goes awry. Has anyone had a chance to try SAP with either of the newer firmwares (iMate or Dopod) - might give us a good clue if the HTC one's going to work.

I've connected my 6230i easily enough, just remember to allow "auto connect without confirmation" on the phone after entering the 16 digit code
I have tried my HW6915 pocket pc but like the other PPC's it is not recognised

A reply I got from HTC support on 21/09/2006 asking about the Merc SAP problem was:
At present the TyTN is only compatable with a limited number of kits. A ROM update will be released shortly to update this.
Click to expand...
Click to collapse
So fingers crossed that it will be soon and solve the problem.

I asked them the same thing a while ago and just checked back in on availability. Just got ...
"At present the HTC ROM for the TyTN is being written and tested and we expect it to be released in the very near future."
So, patience is a virtue I hear....

Right I heard there is a process called Bluetooth Cracking/Eaves Dropping

This process sounds good for what I need to do.
I need to connect and pair up a bluetooth device(being the bluetooth cradle) in which the gps connects to for it to recieve the satellites.
But I dont know the password so I need to pair and connect the devices without using the password?
So how do I do this

There should have an instruction on how to connect your GPS unit (bluetooth) with other devices (e.g. button to press etc and the password to use, e.g. 0000 or 1234). Read the manual.

Yes I do not have the manuals I brought 4 prophits with the gps receivers of a company and I do not have the password to connect/pair them up so I need somebody to tell me how to bluetooth hack(or something of the sort) to make a connection with them/pair them to use the gps

First of all, it is technically difficult to get the password of a bluetooth connection without the device making connections and transfering data. If I'm not mistaken, getting the 'password' out of a bluetooth connection, you will need the device to be sending signal among each other. While enough package (data) have been captured, you can then 'guess' the pin out of the large quantity of data. That is possible if you have the appropriate hardware (not your phone) and software.
Secondly, as the bluetooth device is paired (or worse still, un-paired) to another device, you need intensive hack to your phone to spoof as the bluetooth that it is not (e.g. trying to pretend to be another bluetooth device), which I'm not sure is feasibly do-able (if not impossible).
Finally, as I've mentioned above, rather than spending time on trying to do the near impossible, try to look for this manual. And, there shoudnt be that many buttons on the GPS unit that, with a certain amount of trial and error, you ought to be able to make it into pairing mode and try guessing the PIN from there. The default PIN for such `unnecessary to be secure` device are usually the commons one like 1234, 1111, and 0000.

Yes But I brought them without the manual. The make is Mercury but can find any information about them on the internet and ive tried all the normal codes such as 0000, 1111, 1234, 1166, 1616, 6611 etc

attitude said:
Yes But I brought them without the manual. The make is Mercury but can find any information about them on the internet and ive tried all the normal codes such as 0000, 1111, 1234, 1166, 1616, 6611 etc
Click to expand...
Click to collapse
tried 4321?

Can't connect Bluetooth GPS Receiver

Hello
unfortunatly the search didn't work for me to find a solution (maybe anybody can help me..)
i simply want to pair my Universal with my bluetooth gps receiver.
in settings/connections/bluetooth i added a new device.
it took a while, then it found my gps receiver and asked me for passkey. i used "1234" - but i am unsure, if that was the right key (i'm 80% sure..)
after that i got a new entry in the list of the avaible devices.
so far so good... BUT:
the gps receiver only appers as "disconnected". when i want to "connect" to it, it says "Your device did not connect with GP-700. The connection failed or the passcode is incorrect."
maybe the passcode is incorrect, ok. but i can't insert a new passkey, because it won't ask me for new entry after searching for new devices. i also can't delete the gps receiver entry.
I checked the box in "select services to use from this device. Serial Port". is that correct?
...hmmm it has to be so simple but i can't pair... gr......
please help me

nobody knows an answer...? ;((

hi, we maybe able to help but need more info as i would for sure. what rom are you using? and possibly what radio version? i use a bt gps with mine and passcode is 1234. not sure if thats the case for all though. depending on the rom im using mine shows as disconnected sometimes but i also have to create a valid com port to use with it. hope that helps.

Also what program are you using with you BT device? Mine pairs with '0000'.
If I use Route66, I don't even need to pair it.
When using iGo8, I do pair it.
When using Google Maps, I also need to add a COM port (I use 1 as some programs can't use 0 - eg, MemoryMaps).

Hey, thanks for answering my question.
i am using Tomal v8.90 (light). My radio version is (after unlocking) 0.00.00. Should i flash it back to 1.18? do i have disadvantages?
i wanted to use tomtom..
hope these information helps

I think there's your problem. I'd flash either 1.15 or 1.18 radio.

hm... anybody can help me..?

ThaMasterT said:
hm... anybody can help me..?
Click to expand...
Click to collapse
Flash an updated radio...1.15

i flashed to 1.15 succesfully.
i found out, that 1234 for my device is the right passkey.
i connected in connections/bluetooth to my device (like i wrote above) and it says "connection successful". after that my device is listed under "disconnected" again. furthermore i can't connect to it, when i click on "connect" in the settings. i can't connect to it in tomtom, too...
when i click on the device (listed under connection-settings in "disconnected") the partnership settings will be displayed. here i can select services to use from device. it provide me a list with one item to check: "serial port". but even if i check or if not, it wouldn't affect anything(?). i simply can't connect to my device...

hey,
i solved that problem. i choosed "the right" com port to use the receiver.
thats a little weird, cus i already choosed some random com ports before and it never worked for me. unfortunately i didn't get some useful error messages or something from tomtom or other programs. now i tried a different port again and suddenly it worked...
sorry for the trivial problem and thank you very much for helping me.

btw: the device is still listed as "disconnected" in settings. who the **** cares...

i have the tomtom gps mkii sirf III and i don't get it paired or manually connected either, but then, when i installed the tomtom software, i found out, that it does not need to be paired in the windows settings first. ok, you might say, this is a coincidence, because tomtom works fine with their own hardware, of course. but no! in my settings there is also an "external gps" point, and all you need to do is put in a proper port and speed and it'll work. the easiest test for that would be google maps. in the beginning i also worried about pairing and connecting, but i found that i didn't have to do that.