Help please! - 8525, TyTN, MDA Vario II, JasJam General

Im new to the Hermes scene. last night i decided to be a little adventurous and flashed shamanix grass 2.2 to my phone. I am enjoying the speed and memory with this new ROM but i am having one issue: when i try to connect to the internet via ATT 3G internet i keep getting the notification "Cannot Connect: The answering Modem has disconnected. To check your connection settings and change them if needed, tap Settings". I have no idea how to configure these settings to work with ATT's internet, so some help would be greatly appreciated.

welcome to xda-developers... There are several options available to you... you can go to AT&T's website and get the settings from there and add them to your device, or you can use the google link in my signature and search for wpbear's cingular settings cab file... it is a one step setup file that adds the medianet settings for you... It is posted all over this forum and I believe there is mention of it in the wiki...
Good Luck...

I installed the cab and i am now able to access the internet. but when i do connect there is an "H" in the top corner instead of 3G? i dont know if this is a big deal or not?

Looks like your connecting using HSDPA
http://forum.xda-developers.com/showthread.php?t=352361

Related

Complete newb to my Qtek... (Cingular US Settings)

Hi there, I'm about to update my Qtek 9100 to the latest WWE ROM posted last week. Is there anything very important I should know before I do this? I already backed up all my information and files, and I'm currently running on the Cingular US network. I tried searching for the official Cingular 8125 ROM but wasn't able to find it. I really, REALLY want to have the exact same settings as the 8125 does for connecting to the internet so I get full speed EDGE and the best phone signal it can offer. Could anybody please tell me how to set up my Qtek so it's exactly the same, including the E icon when I'm in an EDGE-covered area? I did a search for everything, but all I managed to find were a bunch of posts where everybody knew what everybody else was talking about. I managed to find the cab file named "Signed_Edge_Icon.sa" but I honestly have no idea what to do with it. As I said, I'm completely new to this, and I just want my Qtek 9100 to perform the best it possible can on Cingular's network. Thank you so much!
Cingular Settings
Hi,
Cingular has a blow by blow description of the settings.
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56475.html
are the internet settings
.... and .....
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56044.html
are the MMS settings
And for the cab file, just use activesync (press the explore icon) to drag the cab file to you phone and then tap it to run it.
Cool, I got that cab installed, but I'm having trouble with those Cingular settings... I don't have a "Set up Proxy Server" option under the first My ISP list. I do have it under My Work Network, but to my understanding that is a completely different connection option. Is it okay to have the wap.cingular connection under My ISP and the proxy server information under My Work Network, or should I just put everything under My Work Network and leave My ISP alone?
Through my experience the proxy settings for Cingular do two things (one good one bad) and your decision to use them should be based on which is more necessary to you.
1. The proxy settings allow you to use the MEdia Net homepage at device.home
2. The proxy settings screw with your WIFI connection and cause timeout errors and such when attempting to browse at home.
I personally find that the MEdia Net homepage is nice, but I can live without it or even replace it with other things like google.com/ig.
If you want to enable the proxy settings on the My ISP panel go to the advanced tab and create a new profile where My ISP is. For some reason the new one will allow you to put in proxy settings, but the default My ISP won't.

WiFi uses GPRS Proxy - Fix without removing Proxy?

I've got GPRS and WiFi working perfectly.
However, everytime I switch between WiFi and GPRS, I got to reentern/remove the proxy server.
My GPRS REQUIRES the use of the proxy, so there's no going around that, and there are no unlimited data plans on the non-proxy access point [face_cry]
I've looked through both HowardForums (where I am from, I've been a Symbian user until now) and here for already existing info.
Aside from finding tons of people who couldnt get the wifi to work because of the proxy, none of those threads gave a solution that included KEEPING the proxy server for GPRS.
If there is a thread with the information to get WiFi to NOT use the GPRS proxy, just link me to the thread and Ill figure out the rest on my own
Thnx! Hope I'll get my post count increased fast so I'm not considered as a post-and-leave user.
of course u can keep the the proxy server for GPRS and surf the internet via wifi ~~
but pity that my device's interface is in chs & my broken english
(if i misunderstand ur thread,dont brick me )
u can fix it ,follow below
start menu--setting---connection--connetion,or u can see my device' captures pic1
(i dont really sure if ur device is that path,i just translated it from chinese to english)
select the icon in green (pic1)
a new window like pic2,just do it
and the key step in pic3:
the two places in red circle
dont select ur wap setting ,select my isp or my network is ok
when u want to connect internet via gprs,u rechange to ur gprs setting
enjoys
oh I understand what you mean. Yes that way I dont have to retype my proxy addresses.
Sadly, it's still not automated from what I see
I'll have to make a shortcut for that section.
Thanks woohyuksheng!
Cingular proxy cabs
Cingular has a set of cab files that enable/disable the proxy settings. if you search this forun you will find then. they are also in the latest cingular rom, black 3.0, and custel 1.3.
if you are not on cingular you could try and edit the cab files with your carrier info.
give it a try.
jcb_home said:
Cingular has a set of cab files that enable/disable the proxy settings. if you search this forun you will find then. they are also in the latest cingular rom, black 3.0, and custel 1.3.
if you are not on cingular you could try and edit the cab files with your carrier info.
give it a try.
Click to expand...
Click to collapse
It didnt work for me. I'll explain below, but first I want to say I found my own fix. (however, it sucks to switch my fix back and forth)
Woohyuksheng's trick didn't do anything either.
My fix for WiFi usage
Thanks JCB Dalek!
All I needed was to add DNS addresses for my Wifi adapter and to EnableAutoDetect=1
Ignore this , I changed everything I said

AT&T mMode settings cab?

I looked on this page http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs but it does not have the provider info for AT&T (mMode)
I am not sure how to create one but I think it would be something nice to have so if someone knows how this is just a request if it's not too much trouble to make.
Thanks
Here ya go.... Works for ATT as everyone says on this board... SEARCH THE FORUMS
I don't have MediaNET, I have Pre-at&t, Pre-Cingular, AT&T Wireless mMode.
Are you telling me I can use the MediaNET settings?
AFAIK I have to use "proxy" for my AP name and use some other IP's as well to be able to use mMode.
IE this config - http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=38077
I just don't know how to make a .cab to auto set this up every time I hard reset or change my rom.
I would like to bump this up, can anybody out there create a at&t blue mmode settings cab?
You really don't need a cab. Just add a new new modem connection to "my ISP" in the settings-connections tab. Name it whatever (does not matter), choose "cellular line, gprs" from the pull down, then click next. Access point name is "proxy" and click next/finish. Nothing else needs to be done. Don't need "WAP settings", http addresses or anything else. I flash my trinity constantly and this is all I ever do.
so you don't need to put in the 10.250.250.54 connection strings for mmode and mmode mms? it gets annoying re-entering all that data just to have it gone again everytime some new hot rom comes out that i got to have.
i'd write a cab myself if i knew how.
yup like the post above yours says, all you need is to make a new connection that connects to "proxy" and your done for the mMode connection.
For the MMS the only two things you need to know are;
10.250.250.55:8080
http://mmsc.mymmode.com
Then you select the connection you made under connections and your done.
EDIT:
btw, are you in a 3G network area and is your service working?
No problems with 3G, including "H" and I am still using my original blue ATT sim from yrs ago.
Do you mind if I ask where your located?
I am really getting sick of being jerked arround!
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=55356
http://forums.wireless.att.com/cng/board/message?board.id=mmode&thread.id=13039
I can't get any help or response either!
DH, I'm in DC & live in MD, no problems in either of those areas.
With regard to settings, have you tried another browser? Running WM6 and using IE with the above settings never works but switching to opera solves the connection issues more often than not.
BTW I’m in the DC (Mont. Fred. And Washington county) area as well if it matters.
Hi...I got my mmode data settings to work according to your suggestion...but can't get the mms to download. I've got the old blue sim card...any suggestions for getting the MMS to work along with the data? It connects...retrieves message headers, i know who the messages are from...can even get subjects...but all the messages just hang at 0%??

X01HT(Hermes200) & AT&T's MediaNet Max

I just got this X01HT(Hermes200) with WM6 (Schap's 3.30c ROM) from eBay, and I am new to this forum. I am thinking to sign up with AT&T's MediaNet Max plan. Since it is NOT a Cingular 8525 phone "officially" supported by AT&T, I suspect the settings to access MediaNet and Cingular Video could be different, and if I call AT&T, they will not help because I am not using the phone they support. Could anybody help with the settings, or is there already a link (I searched and did not find it)? Thanks!
jcc266 said:
I just got this X01HT(Hermes200) with WM6 (Schap's 3.30c ROM) from eBay, and I am new to this forum. I am thinking to sign up with AT&T's MediaNet Max plan. Since it is NOT a Cingular 8525 phone "officially" supported by AT&T, I suspect the settings to access MediaNet and Cingular Video could be different, and if I call AT&T, they will not help because I am not using the phone they support. Could anybody help with the settings, or is there already a link (I searched and did not find it)? Thanks!
Click to expand...
Click to collapse
Welcome on board
You may find the two links following of use:
https://supportcingular.atgnow.com/cng/search.do?category=%2FTopics%2FOrange%2FAll+Topics&universe=cingular&searchText=Verify+Connection+Settings+on+the+Cingular+8525+for+MEdia+Net+Access&searchBt.x=20&searchBt.y=5
http://forum.xda-developers.com/showpost.php?p=1063528&postcount=34
Mike
Thanks Mike for the links. But they are for Cingular (AT&T) 8525 which AT&T supports (meaning with Media Net URL already coded in the Today screen and in the AT&T ROM ? etc.) , and mine is X01HT with a non-AT&T ROM. I copied Cingular Video's URL from my son's AT&T-supported phone onto the PIE Address Bar on my X01HT, and the return error message said "CV is only available on supported 3G phones." But I know for a fact that my X01HT is a 3G phone...
Trying to follow the instructions on the second link, I did not even have Media Net on the "Select Networks" list so I could not go any further. I must be missing something and obviously a hopeless newbie. Perhaps some links specifically for using X01HT(Hermes200) with AT&T's Media Net would help to propel me into the wonderful world of MediaNetitng...
There are all different way to use the X01HT on AT&T network. If you don't mind use WM5, the esaliest way is to just DL the latest rom for AT&T - http://www.america.htc.com/support/8525/software-downloads.html.
If you want WM6, then you have to setup the MediaNet connection manuelly.
http://hsc.asia.htc.com/e-club/download/rom_code_hkg_eng.aspx
1st
Setting-> Connection-> GPRS Setting -> pick "CHAP"
2nd
Setting-> Connection-> Connectiokn-> New Network-> add-> type "Media Net" for name, pick " GPRS,3G " for line->Access Pt. type" wap.cingular"-> user name type " [email protected]" -> pw type" cingular1"
also check out here http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs
Hi maximuz329, thanks for your 3 postings responding to my question. The last one's link really helps. Now I can browse the net with URL typed into the address bar. One more question: what is the URL for Cingular Video for my X01HT(Hermes200), or any other way to access it beside typing-in the URL? Thanks again.
jcc266 said:
Hi maximuz329, thanks for your 3 postings responding to my question. The last one's link really helps. Now I can browse the net with URL typed into the address bar. One more question: what is the URL for Cingular Video for my X01HT(Hermes200), or any other way to access it beside typing-in the URL? Thanks again.
Click to expand...
Click to collapse
For cingular video..you need to make sure your proxy setting are correct. However I would recommend that you flash your phone with vpg's rom...and all will work for you :
http://forum.xda-developers.com/showthread.php?t=317952
Get the lastest one from vp3G... the 3.60 version
http://forum.xda-developers.com/showpost.php?p=1360192&postcount=1 for MediaNet setup on any WM5 or WM6
AT&T MMS Config Web site
Here is the link to AT&T's Online Help. It refers to the Fuze but the settings are the same for us.
http://www.wireless.att.com/support...ory=Picture/Video+Messaging&tutorialId=700300
OK, i have big problems with my MMS. My media net works perfent, the internet and Internet sharing, but i cant send MMS. It starts to send and then a warning that cano't send the massage. Tha text masseging works good, i have try installing different ROM'S and the problem paesist. Can some one help me please, Thanks
I have try all posible and logical thing, please no simple and very logical things.

tmobile connection settings

Hi
Can anyone help a novice here?
I have recently upgraded my ameo to WM6.
In the process I lost all my connection settings for tmobile.
I have a web n walk sim but just cannot get the connection correct.
Also for some reason i no longer receive text messages so cannot use the tmobile link to "send settings" to ameo.
Please please help
Thanks
Alan
alanjb123 said:
Hi
Can anyone help a novice here?
I have recently upgraded my ameo to WM6.
In the process I lost all my connection settings for tmobile.
I have a web n walk sim but just cannot get the connection correct.
Also for some reason i no longer receive text messages so cannot use the tmobile link to "send settings" to ameo.
Please please help
Thanks
Alan
Click to expand...
Click to collapse
The tmobile settings can be found by searching the forums - they are in a few places.
Which ROM did you use - most now include the Network Wizard which will run automatically after upgrade. If not it is at Start\Settings\Connections. That will insert the correct settings for you.
Hi
Thanks for the quick reply.
ROM Version - 2.20.405.1
ROM Date - 06/21/07
Radio Version - 1.32.00.00
ExtROM - 2.20.405.101
Yes the Network Wizard is there and it puts the settings in but to no avail.
The 3G logo comes up and i have 4 bars to show high signal strength but whenever i try to connect to the net it says the modem you are connecting to has dropped the connection.
Can anyone point me to the correct thread?
Thanks
Alan
One more thing I did upgrade to real vga 128dpi
in connection settings change user name from
t-mobile to user
alanjb123 said:
Hi
Thanks for the quick reply.
ROM Version - 2.20.405.1
ROM Date - 06/21/07
Radio Version - 1.32.00.00
ExtROM - 2.20.405.101
Yes the Network Wizard is there and it puts the settings in but to no avail.
The 3G logo comes up and i have 4 bars to show high signal strength but whenever i try to connect to the net it says the modem you are connecting to has dropped the connection.
Can anyone point me to the correct thread?
Thanks
Alan
Click to expand...
Click to collapse
The connections settings are correct using the Network Wizard. The problem you are having may actually be a network problem. I get this from time to time with T-mobile UK - I will get this message for a couple of hours and it will then just stop (it often stops more quickly if I am on the move which I assume is becuase I am moving cells)
How do you mean you are 'no longer receiving texts'? is this a common request to cusomer services!?
Anyway as far as I know you cannot have settings sent by text to the Ameo, or any windows mobile device - you have to input them manually or use the settings wizard.
Try going on settings/phone/band and change to GSM - see if you still fail to get a connection. If so try upgrading your radio, then reflashing.
If this fails try another t-mobile SIM in the Ameo.
Your error is not one I have ever come across on T-Mobile uk using my Ameo.
T-Mobile settings:
Start - Settings - Connection - Connection - Under my ISP click on Manage Existing Conn.
Delete all connections in there, and click on Proxy at the bottom and remove the tick on this network requires Proxy.
Create a new connection:
Cell Line (GPRS)
Access Point: general.t-mobile.uk
Username: user
Password: pass
No DNS, no IP, no proxy.
Save and soft reset.
Good luck.
Thanks everyone!
Eventually got this sorted.
Works like a dream now
Reflashed, used the wizard and all is well in the world.
Is anyone having a problem with media player?
Every time I launch media player the ameo crashes (as in locks).
Thanks again
Alan
alanjb123 said:
Is anyone having a problem with media player?
Every time I launch media player the ameo crashes (as in locks).
Thanks again
Alan
Click to expand...
Click to collapse
Check your other thread - I've answered the problem there.
Post deleted
spacecat said:
in connection settings change user name from
t-mobile to user
Click to expand...
Click to collapse
Current T-mob phones are coming out with USER as t-mobile, however, user still seems to work.
PASSWORD- pass
APN- general.t-mobile.uk
Again some units come with a Proxy pre installed (My N95 did)-
149.254.201.132
Proxy port- 8080
If this doesn't work then use without.
Also try a DNS server setting-
DNS 4.2.2.1
Alt DNS 4.2.2.2

Categories

Resources