does an english wizard have the same physical keyboard (letters in the same positions) than an italian or french or german wizard?
Are the keyboards all the same?
thanx
nope.. T-Mobile germany's keyboards are QWERTZ:
http://www.mobilewhack.com/images/T-Mobile-MDA-Vario.jpg
While here's a French AZERTY:
http://www.smartphonefrance.info/img/Qtek9100-05.jpg
well...i need to know the italian and the english...do they match?
as far as letter and number keys go, yes - IT and EN are both:
QWERTYUIOP
ASDFGHJKL
ZXCVBNM
There may be some difference in the other keys, due to the italian language making use of extended letters a lot (thus putting them on the keyboard would be useful for users of it).
Haven't spotted a picture of an IT one yet
if the underlying question is: Can I use an english ROM with an italian device? The answer is : yes. You will find other posts that explain what registry changes will let you map correctly the keyboard. Like in France we use AZERTY keyboards, so making the correct registry changes, we can use our french keyboard and use the A key and get an A instead of a Q
yes but the problem is that in italian qwerty there are buttons for à,è,é,ò,ì,ù ...very used letter in my language...i just wonder if on english qwerty these letters/button ar present and primary.
Its' the same in French! If you have an italian device and if you update correctly the registry you should have all keys functionning as before. I've not tested it yet on my phone (still a french ROM) but I do it on my PC: french keyboard and english OS. I can use all the accented letters like if I were using a French keyboard with a French OS. I don't see why it should be otherwise on the PPC.
i can't explain...sorry!
what I mean is if the letter/button "è" (for instance) is NOT PHISICALLY present/written on the phisycal qwerty english tkeyboard BUT it is present ( and IT IS PRESENT because I use it everyday) on the italian qwerty...this answers to my question
Not quite sure what you are looking for exactly. Anyway, maybe this will help:
go to \HKCU\ControlPanel\Keybd
There should be a "Locale" string value. If it's not there create it! and give it the value "0410"
To get the accented letters like e
press e
then the blue dot (left bottom corner)
then the space bar
I hope I'm making sense.Good luck!
:x
He's asking whether the keys are physically there on the slide-out keyboard. I.e. is there a little label / sticker with "è" on it?
There isn't one the English version (you can still get that character by means of the Sym key in combination with the 'e' key).
just to add confusion to this problem.
i have a t mobile MDA and a frien has a O2 mini and the keyboard layout is different on both. the Mini gets the benefit of a '£' sign whilst i have to get the electronic keyboard out for this. i suppose i could do a reg edit, anyone know how???
Hi, I am a new user to
A) this web site
and
B) this Phone. 5 days so far.....
I dont know if my topic heading is quite correct but I am sure someone will correct me if I am wrong.
This phone seems to have so many names, anyhow, mine is on Orange here in the UK and called a SPV M3100
Right, only thing that gets on my nerves a bit with this phone is there is no
T9 "predictive text input" like I am and have been used to with Nokia phones for the last 7 or so years.
What I mean is, you all know how you write a text message on a Nokia with predictive texting. using just your thumb etc.
What I am after is, is there some software / program I can download that would make the screen like a keypad within the send SMS program. so it is easier to text.
Because unless I am mssing something. The only way to text on the ORANGE version is either with the slide out keypad, or with the virtual keypad and stylus ???
Thank you for reading this and perhaps you can advice me.
To get T9 with a normal style phone looking interface you can install the PhonePad application which is available here on this site (its linked in the Hermes Wiki):
ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
You can also use the Block Recognizer, Onscreen Keyboard, Letter Recognizer, Symbol Pad and Transcriber as well as the slide out keyboard on a standard M3100.. In fact I think the options are the same as any Hermes?
I own a TC UK version, and I edited the registry as described by jeroen_76 to be able to use the Dutch T9.
Now when I use either the keyboard or the keypad I only get digits, no characters or symbols. Strange thing is, when it is in character mode, it shows the ABC key. If you press this, it switches to digit keys.
What did I do wrong?
I recieve exactly the same behavior after installing the german language on my XDA Orbit II with bepe ROM..... is there a key combination to enable/disable the numbers? On a notebook i would hit the "Function" key ...
I have a question for those of you (if any) who are using the letter recognizer, the block recognizer, or the original Windows Mobile keyboard as your input method on the Touch HD: Do you get word completion pop-ups?
I'm a long-time WM user (the Touch HD is my fifth WM device) and the letter recognizer is my preferred method of input and one of the reasons I like it is the convenience of not having to type entire long words most of the time, with the ability to simply pick from the completion suggestions pop-up instead. However, I get no completion pop-up on the Touch HD when I use the letter recognizer. The same is true for the block recognizer and the WM keyboard as well. Am I alone in experiencing this? Am I alone in being annoyed by this? What gives?...
I use the Letter Recognizer and find it faster than any of the keyboard. Make sure you enable T9 in the default keyboard and word completion will be available. I thought I lost it too when I accidentally disabled T9.
Thanks for your response. This tells me that something might be wrong on my device, because I get no word completion pop-ups even when I do that.
Here are all of my current settings related to this:
On the Full QWERTY keyboard, the "ABC <-> T9" slider is set to T9.
On the Compact QWERTY keyboard, the "ABC <-> T9" slider is set to T9.
Under "Touch Input Settings", "Word Completion in T9 mode" is selected, "Word Completion in ABC mode" is selected, "Auto-Substitution" is deselected, "Spell Correction" is deselected.
Under the input "Options" (the original WM input options), on the "Word Completion" tab, "Suggest words when entering text" is selected. (The "Suggest after entering" setting is "2 letters", the "Suggest" setting is "4 words", and "Add a space after word" is deselected.) And "Enable Auto Correct" is deselected.
Still no word completion suggestion pop-ups...
I have no idea what could be wrong!
If there's anyone out there with additional insight into this, your feedback would be appreciated. You might be my only hope.
It's odd, I set mine to the "phone keypad" and now it wont go back to any of the others, I've tried them all, selected them, go back in and *poof* it's gone back to a standard phone layout. Turning it on and off failed to fix this so I'm presuming I'm going to have to reset
I have the same problem here too.
What keyboards do you have installed? I have the SPB Keyboard, reckon that might affect things??
All my settings are the same as above...and HD Tweak says T9 and word completion are on. T9 and word completion wwork fine on the keyboards but not the letter/block recogniser.
I don't have any third party keyboard installed (if I don't count the HTC stuff that came with the phone). I do have a bunch of other software installed, on the other hand. But, I don't think any of those have anything to do with input methods (although, it's hard to discount "unintended consequences"...).
I must add that suggestions don't work for me on the Windows Mobile default keyboard either. (I'm not sure if you implied that it works on yours.)
So, my exact situation is as follows:
HTC Full QWERTY keyboard:
Suggestions displayed horizontally listed (i.e., HTC-proprietary)
HTC Compact QWERTY keyboard:
Suggestions displayed horizontally listed (i.e., HTC-proprietary)
HTC Phone keypad:
Suggestions (surprisingly) displayed horizontally listed (i.e., HTC-proprietary)
Windows default keyboard:
No suggestions
Letter recognizer:
No suggestions
Block recognizer:
No suggestions
Suggestions aren't applicable to the Transcriber, naturally.
Perhaps I should have tried this much sooner, but it just occurred to me to try a wider Google search on this topic, and I came across another thread on this site that seems like it might contain the solution(s):
http://forum.xda-developers.com/showthread.php?t=441656&highlight=word+completion
I'm at work right now, so I can't try it right away, but I'll surely do it as soon as I get home. If anyone else with this problem is willing to try that before me, please let us know about the result.
gadgetuk437 said:
I have the same problem here too.
What keyboards do you have installed? I have the SPB Keyboard, reckon that might affect things??
All my settings are the same as above...and HD Tweak says T9 and word completion are on. T9 and word completion wwork fine on the keyboards but not the letter/block recogniser.
Click to expand...
Click to collapse
I use the phone keypad on mine and it was fine up until yesterday.
The only thing it gives now is numbers! every other method of text input appears to be ok
Strange, I have had no issues with word complete as long as T9 is selected in the default HTC Full QWERTY keyboard or any of the HTC keyboard. Had this issue with my Omnia in the past where if T9 is activated, the Word Complete pop-up won't work and I had to do a registry tweak to enable word complete, after which T9 is disabled in the other keyboards.
One questoin from a newbie -
i have a problem that I can not menege to use Letter Recognizer.
In settings for inpust I select Letter Recognizer. And confirm.
But always I get keybord. If I open settings again the Full Querty is chosen.
thanx
sorry - I've read the f... manual
I was to lazy
xmaspast said:
I use the phone keypad on mine and it was fine up until yesterday.
The only thing it gives now is numbers! every other method of text input appears to be ok
Click to expand...
Click to collapse
I had a similar problem on my rom (German) after setting T9 to enabled in HD Tweak. Setting T9 in the keyboard settings is fine but you might wanna try to deactivate it in HD Tweak if you enabled it there before.
should it only work when T9 is on ? Or should it also be on when you use ABC?
Cause I would like to have it on when I enabled ABC
I use the letter recogniser about 50% of the time.. I find it slightly quicker than the keyboard on WM.. However as a long time user of UIQ... SE P800/900/990/1 I wish there was something similar to the letter recogniser available on those?? Any one know? It was so logical.. Use the lower half of the screen for letters, top for numbers, and straddle the middle for capitals.. Not like WM where you are restricted to a small box at the bottom.
anyone know if you can get this for WM6.1?
Well, I'm happy to report that the solution explained in the post at the following URL has done what I was trying to achieve (post #8 on that thread):
http://forum.xda-developers.com/showpost.php?p=2630663&postcount=8
This brings back the word completion pop-up lists on the standard Windows Mobile input methods. It does eliminate the HTC word completion on the HTC input methods, though (including T9, which makes the Compact QWERTY useless for typing words). But, if you're not interested in those input methods and all you want is to be able to use the Letter Recognizer, Block Recognizer, or WM keyboard with word completion, this may be your solution. (Naturally, try it at your own risk...)
memko123 said:
sorry - I've read the f... manual
I was to lazy
Click to expand...
Click to collapse
How exactly did you get the Letter Recogniser to work? I used to have it in the OEM ROM but my Enable_recognisers.cab doesn't seem to work on Dutty's 2.1 xtreme ROM.... or is it me??