hi
i am facing a problem i want to reset my dopod 818 pro cell phone, i had n virus i want the cell phone to be reset to the factory setting, as i was using the O2 phoe i was reseting the phoen but in this the reset function is something different can u guide for this this. for reseting the phone .
thanking you
mahendra
mahensty said:
hi
i am facing a problem i want to reset my dopod 818 pro cell phone, i had n virus i want the cell phone to be reset to the factory setting, as i was using the O2 phoe i was reseting the phoen but in this the reset function is something different can u guide for this this. for reseting the phone .
thanking you
mahendra
Click to expand...
Click to collapse
you want reset it like format into default factory setting is it?
do the hard reset..
1.Punch the little hole at the bottom with the stylus for a second or two, then release it..
2.Soon after you release your stylus, quickly press the camera button + comm manager button (networking) + on/off button at the same time..press it until there's a message appear on the screen..after that you may release all the button..
3.press green button (the one you press for phone call)
4.you're done
2nd method..
Open "Today => Settings => Clear Storage"
Enter "1234" as instructed
Hit "YES" in the bottom-bar
btw,what type of virus attack you device? made your device malfunction?
rarely heard ppc got virus
Related
Can anyone tell me how to hard reset or format a Typhoon phone? I have an Audiovox smt5600 that freezes and hard reset might fix it...thanks
Power off the phone. Hold down (and keep holding) the 2 soft buttons and dab the power button.
You should get the Cold Boot Configuration screen after it boots up but it can be tricky to get the timing right. Don't worry if it just boots up normally, turn off and try again. :wink:
thank you mate done it on the 1st try
Hard reset SPV C500
citifone said:
Can anyone tell me how to hard reset or format a Typhoon phone? I have an Audiovox smt5600 that freezes and hard reset might fix it...thanks
Click to expand...
Click to collapse
pusch Run button, then 9 for next page, 9 for next page, than group Acessories (can be 4-6 depends on how many menus you have)
i this group is (6) Default settings, after choice give code 1234 and yes
Note. all Contacts, SMS, history except memory card will be deleted.
by
Good day
I've O2 atom pure and one stupid guy took it while I'm sleeping and set a password then he forgot the passowrd :x ,,,is there anyway to unlock it without hard-reseting because I've important information in it
Regards
unfortunately... no way
isn't there anyway to backup my files at least
You can back up the info in two ways.. via the software inside the phone into a SD card or via active sync. As both method requires the security pin, so, there is really no way of backing it up.
I would suggest that you perform a trial and error (brute force) your way into the phone.
Thanks for the suggestion hanmin but I've tried to do it that way but microsoft did a stupid thing which is a timer that you can't retry entering the password until it finishes and the problem is that it counts double the last time when you enter wrong password
for example at the first time it counts from 3 to 0 and the second time from 6 to 0 and so on
Now I reached 24 hours
reset your atom by pressing power and softreset together with is top and hole near usb connector :lol:
ranganrangan
there is no problem to perform hard reset... the problem was to save the data from atom.
Hard Reset
Please help... I tried to Hard reset by pressing ON and Reset and appeared on screen press green + red button to reset. but after pressing both button simultenously nothing happened and still asking for lock code.
anyway to reset the lock code away???
Please advise,
Thanks
Re: Hard Reset
bonsaiiii said:
Please help... I tried to Hard reset by pressing ON and Reset and appeared on screen press green + red button to reset. but after pressing both button simultenously nothing happened and still asking for lock code.
anyway to reset the lock code away???
Please advise,
Thanks
Click to expand...
Click to collapse
maybe u not press the green+red button at the same time? a hard reset will put your device to factory setting again.
or if that not work, u can always upgrade your atom with the latest upgrade software
hello
maybe you can hard reset via recording button + reset button + power button at the same time.
or try any like this (reset button + power button + any side buttons) ok
Hi, I'v got O2 XDA Mini S and a "little" problem with it. I'v just installed Phone Profiles [Second Edition] 8.0 and it crashed my phone. After installation (on my memory card), I could not see it on my today screen...so I'v tried to configure it in today screen configuration - but I could not get there - the configuration we're not accessible (it crashed). So after that, soft reset. And the real problem began. After the boot screen and "windows mobile welcome screen" the mobile just freezes. Active sync on my PC connects to it just for a second, then disconnects. The Phone Profiles [Second Edition] 8.0 is installed on my memory card, so I'v removed the memory card - the same problem. It was annoying - so hard reset....does not help. I have Wisbar Advance 2 as well, which is starting first and I can see only the welcome screen of it (sometimes it loads and I can see the whole skin). Sometimes (after reboot) I can see the menu, today screen etc. but the phone freezes. I think that the Phone Profiles [Second Edition] 8.0 is freezing the phone after his process starts. Is there anything like "safe mode" start or something like that, which could help me to remove this soft ? Or any other way to normally start the phone ? Any ideas ? Many thanks for help.
It should start after hard reset - phone profiles, wisbar advance will not load after a proper hard reset - the phone will be back to factory condition.
Did you do proper hard reset? After that it sounds like phone profiles should be installed to device memory not storage card. Most today plugins only work properly on device memory.
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
leez said:
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
Click to expand...
Click to collapse
Yep sounds like hard reset is not done. Press these 2 buttons but keep them pressed and dont let go - then press reset with the tip of the stylus and then text should come on the screen with black background. Press green (call) button and hard reset will commence.
Or you can first turn device off - then press the 2 buttons and keep them held and press power on to reach the same screen.
Ok, I'v done it. Many, many thanks for help. The phone manual is wrong (!). . Anyway Phone Profiles [Second Edition] 8.0....WTF is that ? This program just crashed my phone and I need to reinstall all the soft. Wrrr. And I just wanted a profile manager . Thanks again for help ! :mrgreen:
Good, I am glad - try the one I use - its free http://www.winmobileapps.com/device/pocketpc/plt/plt_download.aspx
Nice one, got it. Thanks.
Having looked all over for a couple of days
I came across a picture with instructions for
hard resetting a wizard, which is resetting the phone
thus the phone lock as well.
Dead easy really
1. Press the Comm Manager button (top left)
together with the Voice Activation button (top right)
for 2 seconds.
2. Keep holding the 2 buttons above and press the soft reset
(middle right little hole) with the stylus for another 2 seconds.
3. When the black screen appears it'll ask you to click Send
That's it All done !!
The wizard's going to reboot and reset himself.
Hope this is going to help some of you.
This is called 'Hard Reset' and perhaps its known to almost every wizard owner,its supposed to be known though !!!
Anyways ! thanz for the info!
ATENTION PLEASE... Thanks.
Nice Thread...
but...
what is a hard reset?
what is a soft reset?
what is a cold reset?
what is a simple reset?
what does it do for us?
What da heck!?
Let me recomend this as sticky....
NOP even tough... as a new topic forum...
Hello,
I have XDA mini II, when I got any call or dial any call, network disappears, so what is the issue with it?
One more issue: On pressing the power button screen prompt me to Reinstall.
So what issue with Network and reinstall screen ?
I have to configure whole 2-3 times in a day.
Please suggest me.
Thanks in advance,
Laxmilal
your battery is almost dead!
lmenaria said:
Hello,
I have XDA mini II, when I got any call or dial any call, network disappears, so what is the issue with it?
One more issue: On pressing the power button screen prompt me to Reinstall.
So what issue with Network and reinstall screen ?
I have to configure whole 2-3 times in a day.
Please suggest me.
Thanks in advance,
Laxmilal
Click to expand...
Click to collapse
remove the battery and SIM card and let stand for 10 minutes then reinstall the battery to the device (let it go without a SIM card) and then hard reset your device To performa O2 XDA II Mini Hard / Full Reset : A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, erasing all data that you have created and programs you have installed. Press and hold the power button, and then use the stylus to press the soft reset button at the same time. Be sure you have backed up all your data in a SD card or on your PC before performing a full reset. after the device is in a hard (full reset) make sure the device go to the boot loader (v1.02 listed at the bottom of the screen, while the top printed SERIAL / USB) by pressing the power button+camera and then use the stylus to press the soft reset button at the same time . connect the device to PC using USB Activsync, and Flash ROM the devices to solve problems GPRS or Internet connection you can use SummaryUtilitySP2
I have a similar problem but with GPRS.. I was trying hacked radio 1.13 from the other thread but I doesn't work
iRiKi said:
I have a similar problem but with GPRS.. I was trying hacked radio 1.13 from the other thread but I doesn't work
Click to expand...
Click to collapse
I 've tried the radio version as you mentioned it and the GPRS connection is fine! I suggest you should try to UPDATE the Network Wizard on your device
that cab file can work on the HTC Magician, just look at report ~ http://forum.xda-developers.com/showthread.php?t=360552 ( post # 5 )