I have a Mogel (PPC6800) that I made work on Verizon (thanks to many fine posters here).
I convinced the techs to add my ESN but they say the data won't ever work. I know that someone here, that is smarter than I am, will be able to prove them wrong. I have copied everything that is editable from my XV6700 into the EX-Mogel now XV6800 but it still doesn't work yet.
Please someone with some smarts guide me to what needs to be done. It looks like the following items MAY be what is keeping me from being able to access it:
* The NAI is blank on the M.IP Customer Profile 1 screen.
*I don't know what to put in the HDR AN AUTH Password Location (the contents are scrambled)
*On M.IP Default Profile, the DUN NAI info is blank.
* On M.IP Default Profile, the HA Shared secret is :Secret and the AAA shared Secret is: scrambled text.
*On all the other screens, the HA shared Secret and the AAA shared secret is blank.
Other than these unknowns (unknown because I don't know if any of these are important) Everything looks the same as my XV6700.
hopefully, someone will know these answers and can help all of us move the cheaper Mogels to Verizon. I say cheaper because Mogels are $150 - $225 less than XV6800s on Ebay.
Other post shows exactly how to move the voice portion of the phone over with relative ease but the DATA?????
Thanks
http://forum.xda-developers.com/showthread.php?t=376829
and
http://forum.xda-developers.com/showthread.php?t=376873
may help!
Cab file here
OEM package here
how do i se it up after instalation on my hd
thanks
kwbr said:
Cab file here
OEM package here
Click to expand...
Click to collapse
I'm sorry if this is a stupid question but do I need to subscribe to anything to use this? What features does this provide?
Really?
Don't you need a BlackBerry ID or something of that sort?
getwet said:
how do i se it up after instalation on my hd
thanks
Click to expand...
Click to collapse
Google for Blackberry connect setup
Has anyone had success with this?
What's going on everyone? i have the touch pro and i wanted to know if anyone has had any success with this yet. Are you able to use bbm? I've had no luck setting it up.
Under Identity Tab It states that my PIN # is pending, IP Address has no connection,
Under Status Tab it states that service is not connected.
Under Email Settings it wont allow me to type anything in the email setting box.
Under Utility Tab search your company contact list and set up your email account is greyed out and when I click register now it does nothing.
Under Activation Tab it states Activation Pending
Under Option Detail Tab it
NUmber: 777
Nai: Unused
Password: unused
Any help would be greatly appreciated it, as my sisters and brother all have bb but i don't want to change to a bb. I love my win-mo phone.
saiyen2012 said:
What's going on everyone? i have the touch pro and i wanted to know if anyone has had any success with this yet. Are you able to use bbm? I've had no luck setting it up.
Under Identity Tab It states that my PIN # is pending, IP Address has no connection,
Under Status Tab it states that service is not connected.
Under Email Settings it wont allow me to type anything in the email setting box.
Under Utility Tab search your company contact list and set up your email account is greyed out and when I click register now it does nothing.
Under Activation Tab it states Activation Pending
Under Option Detail Tab it
NUmber: 777
Nai: Unused
Password: unused
Any help would be greatly appreciated it, as my sisters and brother all have bb but i don't want to change to a bb. I love my win-mo phone.
Click to expand...
Click to collapse
Your email provider (company?) has to have a Blackberry server. This pushes you the emails. Then your network provider must give you this Blackberry service. Then your System Administrator will give you a password to activate your account on the phone.
Thanks man, the version is over 6 months old, thanks for the OEM package though..
nice blog here, http://www.sems.org/entry.asp?ENTRY_ID=338
I have some questions regarding Verizon's AKey. I believe my Imagio needs an akey because VZW can't authenticate it. Please only reply if you are willing to help answer my questions.
1. Do All VZW devices use an akey to authenticate the phone on the network? I thought it was for data only. Up until a week ago I didn' even know there was such a thing.
2. In the ESPT (##778 ) settings is the akey field supposed to be blank because it is on my Vogue.
3. Is it correct the akey is 26 digits?
4. Is there a way that I can extract the akey from my Vogue. CDMA workshop 2.7 was no help. I did connect it to DFS & was able to read an akey. There are four fields in the Keys section on the General Tab which are DEC, akey, SSDA, SSDB. Next to the the DEC field there is CS field (check sum) which DFS didn't read.
DEC: 20 digit numeric number.
akey: 16 digit alpha numeric number.
If I do need the akey for my imagio to work on the network then I'll have #8899 like the nice female voice says & this should hopefully resolve my issue. GSM phone are so much easier to play with, just pop in the old sim card. in teh new phone.
I am trying to get a droid x on cricket but having problems in activating it online using phones esn. I tried both the hex and decimal formats but still at standstill.
I understand all the guides in doing the flash and inputting all the correct settings and prl but need to know how I can add this phone to there service Thanks
jbgtenn said:
I am trying to get a droid x on cricket but having problems in activating it online using phones esn. I tried both the hex and decimal formats but still at standstill.
I understand all the guides in doing the flash and inputting all the correct settings and prl but need to know how I can add this phone to there service Thanks
Click to expand...
Click to collapse
Did you dial *#06# to get the DEC number?
Hello all! I recently won a Sprint Moto X on eBay for the shockingly low price of $130, and I decided to attempt to flash it to Page Plus. So, in order, that others may benefit from this awesomeness, I decided to post a basic guide. One thing to note is that, if you have flashed Sprint phones to Page Plus before, the process is very similar.
DISCLAIMER: This guide comes with no guarantees of any kind. If you lose personal data or service, brick your phone, or lose your arm to gangrene, I am not responsible.
Stuff You Need
A PC running Windows
Motorola Drivers (download here)
SPCUtility APK (download here)
DFS (download here)
QPST (download here)
Page Plus PRL (attached)
10.key file (attached)
Stock, rooted Moto X 4.4.2 firmware (you can try an older version, but I've only tested on this)
How to Do It
First, if you don't have one, get a Page Plus phone number and account. You'll need it for manually programming.
If you have trouble getting Page Plus to accept your ESN (which is the MEID you'll find in Settings > About Phone > Status), try live chat until someone is okay with activating a 4G phone. They will probably warn you that they offer no support for programming 4G phones.
Make sure to Live Chat with Page Plus and ask for your MDN, MIN, and SID. Most likely, your MDN and MIN will be your phone number.
Once everything on Page Plus' end is set up, dial ##DIAG# on your phone. In the screen that appears, click the overflow button and choose Edit. Then set Diag Port to Enable.
Now install the Motorola drivers so you can connect your phone to your PC. This is sometimes a tricky process, and I don't know why. Google is your friend if you have trouble. When successful, you will see this in Device Manager.
Before attempting to program, you need your MSL. Install the SPCUtility APK and use it to get your MSL.
If you haven't already, install DFS. Open the program and click the Ports button in the upper-left corner. Then double-click the Motorola QC Diag Port to select it. (If you don't see this port, the drivers are not properly set up.) Close the Ports window.
Enter your MSL in the SPC box under the Ports button. Then click the SPC send arrow. Your log window should show DEVICE UNLOCKED. (If the log window is not visible, click the Log button in the upper-right.)
(Optional) In the General tab, click Read in the SPC box. Then replace the SPC string with 000000 and click Write. This sets your MSL to all-zeroes, useful for future programming.
In the General tab, click Read in the Config box. It may already read NV_ONLY. If it does not, set it and click Write.
Go under the NAM tab and click Read at the bottom. The fields will populate with your phone's current programming. Now replace the numbers in both MIN A and MIN D fields with your MIN. Fill the MDN and PCS fields with your MDN. Finally, in the Home box, fill in your SID and click Write.
In the PRL box, click Load and select the Page Plus PRL you downloaded. Click Write.
At this point, you may click Reset and your phone should have talk/text. Try taking and sending one of each to verify that everything has gone right so far.
Now go back to DFS and send your SPC again to get back to work. In the Data tab, click Read, and then fill out all of the UID fields and the HDR AN NAI field with [email protected] (the X's being your phone number). In the PPP SIP NAI, use [email protected]. Put "vzw" (sans quotes) in all of the password fields, and make sure the authentication box is checked. Click Write.
Go to the Mobile IP tab and click Read. At this point, I admit that I do not know 100% what I am doing, but that these settings worked for me. Basically, make your settings look like these ones, but input your number where I scribbled out my own. Also, for everything in the Selected Profile Settings box, put it in both the first and second profile selections. After filling each of those out, click Write current profile settings. Then click Write in the left box.
At this point, reset your phone. You might have working 1X after a minute. Irrelevant, because we're about to go for 3G. Close DFS.
Open QPST Configuration (install it if you haven't). Click Add New Port... and select the only available port. Click Okay, then go to Start Client > EFS Explorer. Select your phone and enter your MSL. It will take a minute to read the phone's EFS data.
Once the EFS data is loaded, right click the root directory and click New > Directory. Name the new folder DMU.
Inside the DMU folder, click File > Open and select the 10.key file you downloaded. Verify the target path is /DMU/10.key.
When the file is copied successfully, click Phone > Reset Phone. When the phone reboots, wait a minute or two. You should have 3G!
3G speed test results here
MMS Fix
Download and install 8sms from the Play Store or their website.
If you're using KitKat, be sure to set the new app as your default SMS app.
In the app, go to Settings > MMS Settings.
Now set the following:
MMS Network: Sprint
MMSC: http://mms.vtext.com/servlets/mms?X-VZW-MDN=XXXXXXXXXX (the X's being your phone number)
MMS Proxy: leave blank
MMS Port: 8080 (if that doesn't work, try 80)
MMS over WiFi: Off
Volia! You should have working MMS.
Now, I freely admit that there are numerous places to go wrong here, but this is what worked perfectly for me. If you have trouble, tell me and I'll try to help. Also, check out this thread for general flashing reference. Viper is an expert at these kinds of projects.
Happy flashing!
Can I flash Sprint Moto X to Verizon ? and else does you did it already with success
MrSaba said:
Can I flash Sprint Moto X to Verizon ? and else does you did it already with success
Click to expand...
Click to collapse
Flashing between major, independent carriers is illegal. Legally we can only flash between MNVOs.
but what mean MNVO ? I am not USA citizen I live in Republic Of Georgia
MrSaba said:
but what mean MNVO ? I am not USA citizen I live in Republic Of Georgia
Click to expand...
Click to collapse
Ah, in that case I don't know Georgian laws. Even so, I do not know how to flash to Verizon, or even if it is entirely possible.
pageplus is cdma network only? in georgia its not illegal to flash on other network. I need to make sim unlock for gsm metworks
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
MrSaba said:
pageplus is cdma network only? in georgia its not illegal to flash on other network. I need to make sim unlock for gsm metworks
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, Page Plus is CDMA only.
Updated with MMS fix.
Nice guidance.. Carry on..:good::good:
When entering ##DIAG# it asks for a passcode tried 000000 it didn't work
Any ideas??
Thanks very much for the post
ac2014 said:
When entering ##DIAG# it asks for a passcode tried 000000 it didn't work
Any ideas??
Thanks very much for the post
Click to expand...
Click to collapse
It wants your MSL/SPC code. Look for the app called SPCUtility.apk in the OP.
I downloaded it from an XDA page by the guy who developed it but I no longer have the URL and don't recall his handle.
It will tell you your subsidy unlock code, at least it did for me on my Moto X and for several other folks with other Android phones.
How do i get the drivers installed properly?
ac2014 said:
How do i get the drivers installed properly?
Click to expand...
Click to collapse
here's how to install the driver
search for this on google it should be the 1st youtube video
"How to Install Motorola QC Diag Driver"
so i got everything working thanks very much
just few things
1) every time restarting the hone it goes to activation any way to remove it ?
2) im getting notification "Mobile IP Registration response error MIP Error 131:mobile node failed authentication" which makes me nurses cause it pops up every few seconds :crying:
any help would be appreciated
thanks in advanced
ac2014 said:
here's how to install the driver
search for this on google it should be the 1st youtube video
"How to Install Motorola QC Diag Driver"
Click to expand...
Click to collapse
Which version of QC Diag Driver you have used ?
DANIEL AMBRUSO said:
Which version of QC Diag Driver you have used ?
Click to expand...
Click to collapse
The latest available. Dono exactly which 1
ac2014 said:
The latest available. Dono exactly which 1
Click to expand...
Click to collapse
Exactly i want to know about your available version..
DANIEL AMBRUSO said:
Exactly i want to know about your available version..
Click to expand...
Click to collapse
Motorola Mobile Drivers 6.3.0
I successfully got talk and text with this but no data connection. Does anyone have data working?
lswiggins said:
I successfully got talk and text with this but no data connection. Does anyone have data working?
Click to expand...
Click to collapse
It did took 3 minutes but showed up
It might be a bit tricky, u have to input in 2 spots. As you can see it pic provided by @Nicene Nerd
Nicene Nerd said:
Basically, make your settings look like these ones, but input your number where I scribbled out my own. Also, for everything in the Selected Profile Settings box, put it in both the first and second profile selections.
Click to expand...
Click to collapse
Did u input the 2nd profile?