Related
download, unrar the 2 files and copy unto your vougue, run from vogue, for the input put in your ESN with the letters in capital, then the result in output is the MSL
http://rapidshare.com/files/76823976/GetSPC.rar.html
bR
Unfortunately it didn't work on my Telus HTC Touch I was so hopeful, too.
Scratch that! It works as long as you enter the Hex value of your ESN, rather than the DEC value. Great utility!!!
Call sprint (*2), at the menu, ask for vision / data. That should get you straight to a tech, not a cust service rep. Tell them you have error 67 (vision username / password error) and error 1012 (error while provisioning vision services). They will tell you to go into the programming menu (##3282#) and then they will give you another number to enter. That is you MSL number. It is as easy as that. Seriously. I just called in on these errors ( I am actually getting these errors) and the tech walked me through what to do. In doing so, they will give you your MSL number. Try it. NOthing to loose right?
.eric
email ecare
All I did was send this email to ecare.
The Account Number is
The Account Holder PCS Phone Number is
The Account Holder Email on record is
The Account Holder Mailing Address is
I would like the MSID # and the MSL # for my phone. Can you please
provide me with these?
Thanks
Click to expand...
Click to collapse
And they sent me this response within 8 hours.
Dear
Thank you for contacting Sprint. I will be happy to assist you regarding the phone.
I would like to share that the MSID number is and MSL number is . The information is for phone number .
If there is anything else I can assist you with, please feel free to write me. I am here for you.
Thank you for contacting us. Have a great day!
Oscar T.
E-Care
Sprint
Click to expand...
Click to collapse
I erased the info in this post, but they did send me both numbers.
Anybody know why I am receiving this error when trying ot receive a MMS: Error Code: 1012
Could not prepare Vision Services.
Please Try again later. If the problem persists, you may need to contact Sprint.
I have the Verizon XV6900 with it updated to a ROM from PPCGEEKS
Any suggestions?
Does anyone know how to unlock and change the carrier provisioning for the HTC Shift? I have a Shift without Sprint service and would like to use it on another carrier. Is there a PST for the Shift?
I have just noticed that there is an EPST under Settings/Activate. Does anyone know the Sprint Unlock code?
shaunks said:
I have just noticed that there is an EPST under Settings/Activate. Does anyone know the Sprint Unlock code?
Click to expand...
Click to collapse
You can use this program, but runs in Windows Mobile, I ran it on my HTC Mogul, you have to put the ESN (hex) of your shift and press the button, then you get the SPC Code.
http://www.rafaelc.net/files/GetSPC.zip
But the EPST of the Shift only enables you to change the MDN and MSIL, not the PRL or another data
Here is all the info I have on sprint:
554181 activation password(this worked for getting into Activation and EPST)
909387 one time password(didnt work for me)
enter programming mode ##3282#(EPST Advanced)
Hard Reset for Radio
##786#
Hopefully this will help you get somewhere with verizon or whoever.
G
Thanks, the advanced EPST works (I have anoter SPC Code but I used the GetSPC program), I changed all the configuration that I need (as I did with my Mogul)
Now I'm connected with Iusacell, my carrier in Mexico
Regards
excellent, curious how you were able to change the roaming list to go to your towers instead of looking for the sprint towers?
G
GuardianZX9 said:
excellent, curious how you were able to change the roaming list to go to your towers instead of looking for the sprint towers?
G
Click to expand...
Click to collapse
My local carrier gave me a PRL file for my location
Hey guys,
Trying to do a little contributing, thought I would let everyone know something I found with the Droid2 when trying to flash to cricket, it will help you skip allot of steps in some other tutorials..
With the droid 2 in factory default settings, meaning comepletly reset and not activated on any network yet, get past initial droid set up screen by touching the four corners of the screen, starting upper left and go clockwise..
after you are past that skip over the setup and get to your home screen, open your dialer and dial *22804 and send, this will write a cricket prl and your nam to phone..
talk and regular text will work perfectly.. on my phone it downloaded PRL 32100 on the Droid 2 which is set up in crickets system as the (Sanyo M6000), on my actual cricket android device (Sanyo M6000) it has PRL 42100.. they are both on the 60Z android plan.
why there is a difference, I do not know.. In another thread I read that with the new plan etc.. all you should need is a evdo prl to get internet working on the phone since that plan needs no proxy, so autostart.sh and u2nl is useless, but internet will not work just by doing this simple programming method.
I would love to try and pull off the 42100 prl from the cricket android and write it to the droid2 to see if it solves the inet problem, but I have no software that can do it.. my trial for cdma workshop expired a long time ago, and I dont have the 100$ to pay for a single phone flash..
If anyone knows any other program that will copy and write PRL's on droids, if you do I would be happy to post the new 42100 prl for everyone, as well as any other files from cricket android that would be of interest.
p.s. after you program with *22804 you can start using just the base *228 without a problem.. if you try just the 228 first it will just try to activate on verizon instead of cricket
p.s.s. I really hope this is the correct place to post this and its not breaking rules, I have not seen this easiest way of doing this posted anywhere yet, so I just thought I would try and share
Please tell me that this is not serious?
If you activate the ESN to your account and dial *22804 or *22809 in some markets, it will download the prl file and program the MDN, MIN, and SID.
This is way old stuff and does not work in many markets, as it does not here in Houston, TX.
Thanks for trying to be helpful. I didn't mean to clip yo nuts.
Hello all! I recently won a Sprint Moto X on eBay for the shockingly low price of $130, and I decided to attempt to flash it to Page Plus. So, in order, that others may benefit from this awesomeness, I decided to post a basic guide. One thing to note is that, if you have flashed Sprint phones to Page Plus before, the process is very similar.
DISCLAIMER: This guide comes with no guarantees of any kind. If you lose personal data or service, brick your phone, or lose your arm to gangrene, I am not responsible.
Stuff You Need
A PC running Windows
Motorola Drivers (download here)
SPCUtility APK (download here)
DFS (download here)
QPST (download here)
Page Plus PRL (attached)
10.key file (attached)
Stock, rooted Moto X 4.4.2 firmware (you can try an older version, but I've only tested on this)
How to Do It
First, if you don't have one, get a Page Plus phone number and account. You'll need it for manually programming.
If you have trouble getting Page Plus to accept your ESN (which is the MEID you'll find in Settings > About Phone > Status), try live chat until someone is okay with activating a 4G phone. They will probably warn you that they offer no support for programming 4G phones.
Make sure to Live Chat with Page Plus and ask for your MDN, MIN, and SID. Most likely, your MDN and MIN will be your phone number.
Once everything on Page Plus' end is set up, dial ##DIAG# on your phone. In the screen that appears, click the overflow button and choose Edit. Then set Diag Port to Enable.
Now install the Motorola drivers so you can connect your phone to your PC. This is sometimes a tricky process, and I don't know why. Google is your friend if you have trouble. When successful, you will see this in Device Manager.
Before attempting to program, you need your MSL. Install the SPCUtility APK and use it to get your MSL.
If you haven't already, install DFS. Open the program and click the Ports button in the upper-left corner. Then double-click the Motorola QC Diag Port to select it. (If you don't see this port, the drivers are not properly set up.) Close the Ports window.
Enter your MSL in the SPC box under the Ports button. Then click the SPC send arrow. Your log window should show DEVICE UNLOCKED. (If the log window is not visible, click the Log button in the upper-right.)
(Optional) In the General tab, click Read in the SPC box. Then replace the SPC string with 000000 and click Write. This sets your MSL to all-zeroes, useful for future programming.
In the General tab, click Read in the Config box. It may already read NV_ONLY. If it does not, set it and click Write.
Go under the NAM tab and click Read at the bottom. The fields will populate with your phone's current programming. Now replace the numbers in both MIN A and MIN D fields with your MIN. Fill the MDN and PCS fields with your MDN. Finally, in the Home box, fill in your SID and click Write.
In the PRL box, click Load and select the Page Plus PRL you downloaded. Click Write.
At this point, you may click Reset and your phone should have talk/text. Try taking and sending one of each to verify that everything has gone right so far.
Now go back to DFS and send your SPC again to get back to work. In the Data tab, click Read, and then fill out all of the UID fields and the HDR AN NAI field with [email protected] (the X's being your phone number). In the PPP SIP NAI, use [email protected]. Put "vzw" (sans quotes) in all of the password fields, and make sure the authentication box is checked. Click Write.
Go to the Mobile IP tab and click Read. At this point, I admit that I do not know 100% what I am doing, but that these settings worked for me. Basically, make your settings look like these ones, but input your number where I scribbled out my own. Also, for everything in the Selected Profile Settings box, put it in both the first and second profile selections. After filling each of those out, click Write current profile settings. Then click Write in the left box.
At this point, reset your phone. You might have working 1X after a minute. Irrelevant, because we're about to go for 3G. Close DFS.
Open QPST Configuration (install it if you haven't). Click Add New Port... and select the only available port. Click Okay, then go to Start Client > EFS Explorer. Select your phone and enter your MSL. It will take a minute to read the phone's EFS data.
Once the EFS data is loaded, right click the root directory and click New > Directory. Name the new folder DMU.
Inside the DMU folder, click File > Open and select the 10.key file you downloaded. Verify the target path is /DMU/10.key.
When the file is copied successfully, click Phone > Reset Phone. When the phone reboots, wait a minute or two. You should have 3G!
3G speed test results here
MMS Fix
Download and install 8sms from the Play Store or their website.
If you're using KitKat, be sure to set the new app as your default SMS app.
In the app, go to Settings > MMS Settings.
Now set the following:
MMS Network: Sprint
MMSC: http://mms.vtext.com/servlets/mms?X-VZW-MDN=XXXXXXXXXX (the X's being your phone number)
MMS Proxy: leave blank
MMS Port: 8080 (if that doesn't work, try 80)
MMS over WiFi: Off
Volia! You should have working MMS.
Now, I freely admit that there are numerous places to go wrong here, but this is what worked perfectly for me. If you have trouble, tell me and I'll try to help. Also, check out this thread for general flashing reference. Viper is an expert at these kinds of projects.
Happy flashing!
Can I flash Sprint Moto X to Verizon ? and else does you did it already with success
MrSaba said:
Can I flash Sprint Moto X to Verizon ? and else does you did it already with success
Click to expand...
Click to collapse
Flashing between major, independent carriers is illegal. Legally we can only flash between MNVOs.
but what mean MNVO ? I am not USA citizen I live in Republic Of Georgia
MrSaba said:
but what mean MNVO ? I am not USA citizen I live in Republic Of Georgia
Click to expand...
Click to collapse
Ah, in that case I don't know Georgian laws. Even so, I do not know how to flash to Verizon, or even if it is entirely possible.
pageplus is cdma network only? in georgia its not illegal to flash on other network. I need to make sim unlock for gsm metworks
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
MrSaba said:
pageplus is cdma network only? in georgia its not illegal to flash on other network. I need to make sim unlock for gsm metworks
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, Page Plus is CDMA only.
Updated with MMS fix.
Nice guidance.. Carry on..:good::good:
When entering ##DIAG# it asks for a passcode tried 000000 it didn't work
Any ideas??
Thanks very much for the post
ac2014 said:
When entering ##DIAG# it asks for a passcode tried 000000 it didn't work
Any ideas??
Thanks very much for the post
Click to expand...
Click to collapse
It wants your MSL/SPC code. Look for the app called SPCUtility.apk in the OP.
I downloaded it from an XDA page by the guy who developed it but I no longer have the URL and don't recall his handle.
It will tell you your subsidy unlock code, at least it did for me on my Moto X and for several other folks with other Android phones.
How do i get the drivers installed properly?
ac2014 said:
How do i get the drivers installed properly?
Click to expand...
Click to collapse
here's how to install the driver
search for this on google it should be the 1st youtube video
"How to Install Motorola QC Diag Driver"
so i got everything working thanks very much
just few things
1) every time restarting the hone it goes to activation any way to remove it ?
2) im getting notification "Mobile IP Registration response error MIP Error 131:mobile node failed authentication" which makes me nurses cause it pops up every few seconds :crying:
any help would be appreciated
thanks in advanced
ac2014 said:
here's how to install the driver
search for this on google it should be the 1st youtube video
"How to Install Motorola QC Diag Driver"
Click to expand...
Click to collapse
Which version of QC Diag Driver you have used ?
DANIEL AMBRUSO said:
Which version of QC Diag Driver you have used ?
Click to expand...
Click to collapse
The latest available. Dono exactly which 1
ac2014 said:
The latest available. Dono exactly which 1
Click to expand...
Click to collapse
Exactly i want to know about your available version..
DANIEL AMBRUSO said:
Exactly i want to know about your available version..
Click to expand...
Click to collapse
Motorola Mobile Drivers 6.3.0
I successfully got talk and text with this but no data connection. Does anyone have data working?
lswiggins said:
I successfully got talk and text with this but no data connection. Does anyone have data working?
Click to expand...
Click to collapse
It did took 3 minutes but showed up
It might be a bit tricky, u have to input in 2 spots. As you can see it pic provided by @Nicene Nerd
Nicene Nerd said:
Basically, make your settings look like these ones, but input your number where I scribbled out my own. Also, for everything in the Selected Profile Settings box, put it in both the first and second profile selections.
Click to expand...
Click to collapse
Did u input the 2nd profile?
After I got my ls993 unlocked from sprint, i inserted a metro pcs sim and everything worked { voice, sms and data}. After a couple minutes and i decided to debrand it.
after that, some features were removed which i dont really care. but now....i dont options to get to add apn / its all greyed out! i dont also have the Service or MSL Code. All I need is to add an APN! Can anyone help?
And sometimes its says no sim or sim error ..so i insert the sprint sim and dial this code ##72786# and insert the metro sim.
I get the same problem that my Sprint LG G6 after dial ##27263# Removes branding and it is now I can't add new APN. The add apn is grey out. I am looking for this solution.
I have the same problem that my unlock Sprint LG G6 after removes branding, I can't a dd new APN and it is grey out. I am here is looking for help solution too. Hope someone will get this problem solved and put the solution here.
Hi, for people to have this problem, dial 5689#*993#, then RAT selection, gsm/wcdma/lte auto, then the phone popup a window to said if you want to able netwok, put yes, and mobile networks going to appear again. xD :fingers-crossed::fingers-crossed::fingers-crossed::good:
Wiped out Sprint firmware
Please help!
I did wiped cash from bootloader menu, and now my phone just LG phone... How I can back Sprint firmware on it?
bto001 said:
Hi, for people to have this problem, dial 5689#*993#, then RAT selection, gsm/wcdma/lte auto, then the phone popup a window to said if you want to able netwok, put yes, and mobile networks going to appear again. xD :fingers-crossed::fingers-crossed::fingers-crossed::good:
Click to expand...
Click to collapse
This is all am seeing on ma LS-993 [ZVA]
try to search:field test---modem settings---RAT selection--- GSM/WCDMA/LTE auto
bto001 said:
try to search:field test---modem settings---RAT selection--- GSM/WCDMA/LTE auto
Click to expand...
Click to collapse
Network mode is in GSM/WCDMA/LTE auto already
The problem is that I can't add an apn because it is grayed out!
@marshallcodex - Have you tried contacting the community.sprint.com forum to see if they can provide us with more details or steps to add APN?
I just received a refurbished LS993 and applied the latest security update or patch released. Dialing the code to see the hidden menu also only provided the options you shared in your screen capture.
I am behind the curve because I am not eligible to receive the MSL code yet (the LS993 isn't listed as a DSU/UICC Unlockable from Sprint's unlock site). I need to either activate the phone with a new plan for 50 days or have a family/friend activate and use the phone for 50 days then request for the MSL code. Correct me if I'm wrong and I don't have to do it that way.
Anyhow good luck, hopefully you can find your answers and lead the way for us other LS993 owners.
GPhoenix said:
@marshallcodex - Have you tried contacting the community.sprint.com forum to see if they can provide us with more details or steps to add APN?
I just received a refurbished LS993 and applied the latest security update or patch released. Dialing the code to see the hidden menu also only provided the options you shared in your screen capture.
I am behind the curve because I am not eligible to receive the MSL code yet (the LS993 isn't listed as a DSU/UICC Unlockable from Sprint's unlock site). I need to either activate the phone with a new plan for 50 days or have a family/friend activate and use the phone for 50 days then request for the MSL code. Correct me if I'm wrong and I don't have to do it that way.
Anyhow good luck, hopefully you can find your answers and lead the way for us other LS993 owners.
Click to expand...
Click to collapse
The only possible way to unlock the apn section is to activate a new service with them....then the phone will be re-provisioned with all necessary stuff for the phone to work well.....i suggest we have to use their service [the $45 prepaid plan]...then cancel the service after a 3 or 4 days.....then get back to our normal carrier. I have my MSL but cant add apn still
If u already hav a sprint sim...just activate the $45 plan which will $50 [taxes included] the ready to go
Just install this app from Google Play Store and you can add/edit/remove APNs settings...
https://play.google.com/store/apps/details?id=it.appando.app.changeApn
Faraon.Horus said:
Just install this app from Google Play Store and you can add/edit/remove APNs settings...
https://play.google.com/store/apps/details?id=it.appando.app.changeApn
Click to expand...
Click to collapse
Requested url was not found on server
marshallcodex said:
Requested url was not found on server
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=it.appando.app.changeApn
Sorry, you can search it like Change APN... or visit the link attached again...
marshallcodex said:
it opened the system apn settings section and am not able to add one at that section
Click to expand...
Click to collapse
marshallcodex said:
marshallcodex said:
it opened the system apn settings section and am not able to add one at that section
Click to expand...
Click to collapse
Dial 5689#*993# ; go to NAOT + NAO Test + NAO CARRIER (Select NONE).
Check if you can add/edit/remove APNs with the app.
Click to expand...
Click to collapse
Faraon.Horus said:
marshallcodex said:
Dial 5689#*993# ; go to NAOT + NAO Test + NAO CARRIER (Select NONE).
Check if you can add/edit/remove APNs with the app.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
marshallcodex said:
mmmmm Did you tried this:
##72786# Resets provisioning and makes phone reactivate. Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number. Reboots phone.
Backup your info...before proceed...
Click to expand...
Click to collapse
##27263# Removes any branding (sprint) and resets phone to update branding. (useful if flashing to boost or other carrier) (##BRAND#) Reboots phone.
##72786# Resets provisioning and makes phone reactivate. Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number. Reboots phone.
Faraon.Horus said:
##27263# Removes any branding (sprint) and resets phone to update branding. (useful if flashing to boost or other carrier) (##BRAND#) Reboots phone.
##72786# Resets provisioning and makes phone reactivate. Useful if you are having network issues. Sprint recommends this if you ever change your services or phone number. Reboots phone.
Click to expand...
Click to collapse
I used ##72763# and thats why am not able to add and apn now.
I already did ##72786#
marshallcodex said:
I used ##72763# and thats why am not able to add and apn now.
I already did ##72786#
Click to expand...
Click to collapse
A factory reset doesn’t work?