Activesync only allows one computer at a time... - 8125, K-JAM, P4300, MDA Vario General

I have AS 4.1 on both my work laptop and my home laptop. I'm running a more-or-less stock 8125 on AT&T, no cooked ROMs, no unlocked anything (haven't even opened the extended ROM).
If I delete all sync profiles, and sync with one PC, then the other, all is well, but when I go back from PC 2 to PC 1, activesync acts like it's never seen me before and demands that I uninstall one of my profiles before it'll let me sync. It doesn't matter in what order I do this, and I've used the same USB port on each computer every time.
I'm really at wit's end here. I don't want to have to sync as a guest on my own computer!

Sure would love some advice on this one...
Won't bump again though...

Related

O2 Exec and Activesync 4

Just about to open Windows (on the top floor) and throw this thing through it!
Been waiting for months to upgrade to exec from xda2s, and 18hours after opening the box i'm ready to junk it. Cannot get it to sync at all. Read all the forums, zone alarm off, norton off, tried running as4.1, and still i'm getting dizzy watching this little green wheel going round and round and round and round and round..... 'connecting'
Does anybody have a work around or managed to get it to work. Without this facility the units useless to me, apart from maybe a quick £300 quick profit on ebay.
Help please.
I had a simlar problem, until I reluctantly ditched all my other Active sync partnerships (like my xda2 PPc partnership). then created a new partnership and it worked fine.
Good luck
Hi, Stupid question, but where do the older profiles live on my pc? I've looked in the activesync folder but no clues.
Open Avtivesync, go to file, click on mobile device, check and see what devices you have listed. then go to Delete mobile device.
This realy was a quick fix for me , you should be able to have multiple patnerships, perhaps some one else could suggest a better solution.
Thanks for your advice, but it looks as though I had deleted all previous profiles when I did a clean install of as4.1, and still getting dizzy!
Thought about calling O2, but quickly realised I would have better luck just ringing a random number out of the phone book.
I've tried every combination in the connection settings box, still no joy.
Need a solution soon before I reach for the Scotch and Razor Blades.
I've completely given up with this thing. Managed to get it back in the box (which was a minor challenge compared to getting Activesync to work), somebody please save me from ebay.
Do you have you Exec running in Corporate mode? I found that in this mode it won't sync; you just get "Connecting"...and nothing.
I switch to basic or personal and it syncs with no problem. Myabe this will help.
If the machine you are trying to sync with is connecting to an Exchange Server then you will have difficulties.
Try syncing the calendar, contacts and tasks direct with the exchange server and do the rest (notes etc) with the laptop.
Activesync 4 is so rubbish I have resorted to wirelessly syncing direct to my exchange server.
For a while I was cursing the Exec as I had just got my 2s just how I wanted it when I up(?)graded but I remembered that half the fun of these things is solving the problems, even if it doesn't seem like it at the time!
The main thing that you need to remember with ActiveSync 4.x is that you must install this before connecting your EXEC.
If you don't the microsoft driver gets installed instead (and in my case) no amount of deleting/reinstalling was able to recover the situation.
Whilst I was in the middle of that crisis I did some basic PD to try and rectify. Including
a) Installing AS 4.1 build 4807 on another system (preferably clean installed say XP SP2)
b) trying another cable
c) Doing a hard reset of your device and then repeating above steps
d) (obviously!) removing all previous versions of ActiveSync (also afterwards using regedit to remove any final traces and erasing C:\Program Files\Microsoft ActiveSync) and then re-installing
I have tried to include some Device Manager pictures of a working system for reference purposes
Throught trial, and very much swearing at the walls, I've discovered the following:
1. If I have the XDA Exec switched on and connect the USB cable, then I can guarantee a 95% failure to connect.
2. If I turn off the Exec, by the power-switch on side, then connect the USB cable and just leave ActiveSync to power everything up, then I have a 95% success connection rate.
On very odd occasions, I've had to disconnect the Exec, turn it off, then plug the USB in again. And once I restarted the workstation first - probably didn't have to, but was going for a coffee anyway.
AGHHH
I had a failure with Active Sync and established that it still worked with my 2 C500's so I phoned orange.
Eventually made my way to level 3 (highest) tech support to be told that its microsofts problem and that they have withdrawn Active Sync 4 until they can fix it.
I can connect to my M5000, move files via explore but as for the necessity of syncing itand my contacts..............forget it
MArk
Interaction with Outlook
My sync problems went away when I configured Zonealarm to allow it to connect.
I also had to install Outlook, which I don't like as I use Thunderbird for Email. Sync would still not work untill I allowed Outlook to be the default email client. However, I have not defined any accounts on Outlook and Thunderbird does not seem to mind.
Re: Interaction with Outlook
Romney said:
Sync would still not work untill I allowed Outlook to be the default email client. However, I have not defined any accounts on Outlook and Thunderbird does not seem to mind.
Click to expand...
Click to collapse
I got a whole series of increasingly depressed emails from my TBird install after I stuck Outlook on my lappie... In the end I had to take it out for the evening, give it some new extensions and what-not before it started talking to me again...

End of my tether with Activesync 4.1

Is there a credible alternative to Activesnc 4.1 anywhere ? I am absolutely sick and tired of this cr*p.
I want to be able to sync calendar, tasks, notes and files - reliably. That's all. That's not too much to ask is it?
Any ideas ?
TIA, DBo.
I'd be interested in one, been looking for a day or two but pretty new to the PPC thing and not making much progress.
Atm the only surefire way to ActiveSync seems to be, soft reset before sync, again after. It's quite a 1 shot deal, once it's synced, it won't again without a soft reset of the PDA. Note: Never needed to restart the PC used, I have tried this, no difference.
Have you read this?
http://forum.xda-developers.com/viewtopic.php?t=41955&highlight=activesync+solution
Solved that problem for me.
reading the other post now ... my activesync kills itself too i need to reboot my pc to make it work again ... apart from that it wont even synch all my contact ... it misses out random ones all the time
Can't tweak my TCP settings
I'd love to do this, but I can't go messing about with the TCP settings on my company laptop. Not if I want to keep my job.
I need a decent alternative to AS 4.1 even if that means AS 4.2
Silentz:
Yeah, tried that (amongst several hundred other things). I already use DrTCP for optimising my lans due to me using gigE with jumbo packets, so am pretty familiar with it on that ground. I also tried many other reg tweaks (on the PC not PPC) regarding networking etc. to no avail.
From all the tests and tweaks I've done I'm no further into solving this issue, which doesn't half stick in my side. PC m$ os with m$ software talking to a PPC with m$ os with m$ software, who the hell is writing this utter drivvle software?
I have concluded however that the PC / ActiveSync 4.1 side of things does not fail or lockup, regardless of reboots or no reboots or net settings used. It is the PPC's running ActiveSync which borks, stalls then grinds to a halt. I suppose it's possible m$ will fix the PC 4.1 software to not bust the PPC but I've also pretty much resided myself to needing a ROM update to fix the PPC half
This of all things annoys me, I've fixed almost everything else wrong with this phone but turning it off on a regular basis just takes the biscuit, like who does that nowadays? :roll:
Yeah that's right - it's the PPC which goes funky, but in my case it was down to the PC (i think) cramming data at it.
If you switch off (untick) all elements of the today screen it also works better, although that's not really a solution!
Microsoft do need to release ActiveSync 4.2 asap.
Yeah, tried all that, I only have MSN on today page anyways but have tried it with nothing. I only sync contacts anyway and even then only about 100 - still hangs if not the first time...
What about this?
Device Manager
Hi,
I was successful in resolving a "stubborn" active Sync, by doing the following:
Remove USB Cable to K-jam.
Open device manager.
Go to Network adapters.
Disabling adapter called: "Windows Mobile Based Device".
Re-enabling adapter called: "Windows Mobile Based Device".
Plugging USB cable back in.
Kind regards
Adrian
I was successful in resolving a "stubborn" active Sync, by doing the following
Click to expand...
Click to collapse
But for how long?
I find that AS is very unstable.
I have installed the latest ROM and still get problems with both my devices.
If I play an MP3 in Windows Media Player, AS drops the connection and I have to unplug my MDA Vario (or my XDA Mini S) and reconnect it again.
If I soft reset for any reason while still connected to AS, it drops the connection and on re-connect it hangs at 'Looking for changes' and I have to re boot the PC to get a connection again.
Other times without warning it will drop the connection and not re-connect without a re-boot of the PC
etc. etc etc.
Fortunately all my contacts, calendar and tasks are held on my PC in Thunderbird (I don't use Outlook) and I have a seperate sync programme for syncing them so I don't need to rely on AS for data sync.
But I do wish there was an alternative for enabling the connection to the PC.

Connecting, connecting, connecting.......

Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.

TouchHD will not connect to Activesync under XP

Hi All,
failry new memeber when it comes to posting but have been using you guys as an essential source of bugfixing, problem solving and general HTC MDA advice since my TYTN.
I have spent sometime searching but not been able to find anyone with an issue similar to mine.
So heres the thing, recently exchanged my TYTN for a TouchHD and overall extremely impressed with both the handset and dev work done on here already.
I am running Dutty's 1.7 rom coupled with Radio ROM 1.09.25.35 all has been working and syncing wonderfully, however today when i try to sync up to my laptop to upgrade the radio to 1.10.25.25 i cannot get the darn thing to connect to activesync at all.
I am running XP SP3 and activesync 4.5 (again successfully until today)
I am using a non HTC USB lead which i know is generally a no no, however i sync'd up my kaiser with this lead for over a year and have been successfuly syncing my HD until today. I have tried an alterante USB lead just in case, again one with which i had no issue on the Kaiser.
I have tried to sync with the firewall on and off, also with my AntiVirus on and off
I have tried disabling Start_settings_USB-PC "enable faster data sync" to no avail.
I have tried the cusomary uninstall and reinstall of a fresh MS downloaded Activesync again no joy.
When I connect my HD to the pc and select connection type "Disk Drive" it recognises it instantly and allows me to browse the microSD card
When i connect with connection type "ActiveSync" it opens activesync, and displays connecting for smoe time and then decides it can't connect and offers me a diagnostic scan.
I have run the scan and saved the log file for information.
so basically the laptop can see my HD, activesync recognises a device has been connected via USB but refuses to finalise the connection. Oh obviously i have tried the "connect all using the connection" setting in activesyn on the HD as well. Figure the more i can tell you about what i have and havent done now the more time it saves you guys.
Its almost as if a process or service has been stopped or deleted on the device but i am buggered if i can figure if or what that maybe.
Any help appreciated guys. Obviosuly i will as a matter of course re-attempt all the above with the official HTC USB cable when i get home, but honestly dont see this being the issue considering the history of effectiveness of these cables.
I look forward to a flurry of interesting responses for me to try. Big thanks to all those who have made my WM PDA experience spot on to date.
Dboy
Update as promised.
Have got home and tried to connect using the HTC cable but still no joy.....
What could possible have gone wrong ?
No one any ideas ??
Hello,
I got a very similar issue, after some investigation I found out that it was my calendar causing this strange connection behavior.
Please do the following test,
1. delete your phone in active sync
2. reconnect your phone with the PC using the USB cable
3. When it asks for the synchronizing options (by default contacts, calendar,E-mail, favorites & M office one Note are ticked), REMOVE the tick of the calendar.
4. After finishing the setup wizard the synchronizing process will run as expected
So in my case I'm having trouble with the calendar, why ? I don't know but maybe someone else might have an explanation.
Good Luck
I encountered similar problems with ActiveSync previously but it was solved not via a soft/hard reset of my HD, but after I reboot my PC. Hope this can help you.
Note: I rarely shutdown or restart my laptop. I simply leave it to hibernate.
Reset HD Touch to get syn again.
One day could sync next day could not.
In the end did soft reset of phone all OK now.
Think the problem is I took a photo and it took ages to save it?
Thinking of put small hole in case so I can do a soft reset without the pain of unclipping cover. Any thoughts.

ActiveSync silly issue

Hello everyone,
After spending with the dark side of Blackberry phone, I went back to WM because I was amazed by the HD2.
One thing I am not amazed though is my silly Windows Mobile Center.
In fact, I am using Windows 7 Pro. The first I setup partnership it worked fine to sync with my outlook (personal email account). Then I setup on the phone, my work email (i.e. exchange server setup for online activesync), and the sync with the server is working fine. But when I plugged back the USB cable to sync with my personal PC outlook (which is configured with a Gmail account), it doesn't connect at all.
The computer doesn't seem to see the device. And the phone doesn't seem to see the computer.
What I have done so far:
- Check and enabled in Windows firewall all the Windows Mobile Center program
- Uninstall and re-install the driver for PocketPCSync (under Mobile devices in Device Manager)
- Delete my partnership (but I can't recreate it since I can't see the phone
Nothing is changing. I can't sync with the PC at all. On the other hand the sync with the exchange server is working fine.
Is the problem due to the fact that I have a pc-sync with outlook using a gmail account, and an online sync setup with an exchange server?
It is quite an annoying problem.
Thank you for your help
Wouldn't your HD2 be connected in USB disk mode instead of ActiveSync mode? Do you have an extra disk drive appearing in the computer?
I just "fixed" this issue by performing a hard reset (power off then press both volume buttons for a couple of secs until you get the confirmation screen).
Warning: It does erase all your settings, apps and files that aren't on the SD card, but contacts, photos, messages and the like can at least be synced using the Microsoft My Phone app.
After that, Device Centre/ActiveSync connects, and you can re-sync with myphone.
I was wondering if it was a dodgy registry value that caused the crash, but I'm no closer to knowing.
Oh yes: I did try all the options like "faster transfer" and DMA/IP Transport, etc. it was definitely set on ActiveSync mode, and I tried XP Pro/ActiveSync and Win7 Home/Device Centre. And I tried turning the firewall off!
Thanks for your reply guys.
@kilrah:
Yes I already tried to uncheck the checkbox below activesync usb mode.
Also, I have double check I am in activesync mode and not usb disk.
@mpaxton:
I know a hard reset would probably solve the problem but since I have to activesync everyday, it is not a long term solution. I really need to find what is the problem.
I had a similar problem which ended up being a faulty usb connector in the phone which HTC replaced pretty quickly (8 days).
http://forum.xda-developers.com/showthread.php?t=590517
I had hard set without success and reflashed roms too.
Also of note, it was charging fine, just not connecting...
Finally !!!!
Thank you for your reply but I finally figured out my issues (actually there was two issues).
1/ Some services were not running so by using this tutorial (http://www.pocketpcfaq.com/faqs/wmdc/services.htm thanks a lot to the author) I managed to find the services required which were not running.
2/ My second issue is the silly part. Since I have an ultra portable laptop (Sony Vaio P), when I am at home, I access it using "Remote desktop" from my desktop at home so that I can enjoy the big screen and bigger keyboard without having to plug anything to the laptop. And it looks like, if I am connected to the laptop on remote desktop and plug the HD2, nothing happen in windows mobile center, like if it isn't connected. But when I am on the laptop (and after sorting out the services issues I mentioned before), it works perfectly fine. So touch wood it will carrying working but for now it is working fine even after setting up the online sync with the Exchange server.
Not sure if number 2 is a actually a bug or a security restriction but maybe I can send my bill to Microsoft for the hours of testing
jchoco said:
2/ My second issue is the silly part. Since I have an ultra portable laptop (Sony Vaio P), when I am at home, I access it using "Remote desktop" from my desktop at home so that I can enjoy the big screen and bigger keyboard without having to plug anything to the laptop. And it looks like, if I am connected to the laptop on remote desktop and plug the HD2, nothing happen in windows mobile center, like if it isn't connected. But when I am on the laptop (and after sorting out the services issues I mentioned before), it works perfectly fine. So touch wood it will carrying working but for now it is working fine even after setting up the online sync with the Exchange server.
Not sure if number 2 is a actually a bug or a security restriction but maybe I can send my bill to Microsoft for the hours of testing
Click to expand...
Click to collapse
It is probably the setting for RDP on your desktop computer.
You can choose to share local devices and resources:
"Other Supported Plug and Play (PnP) devices"

Categories

Resources