Database Users

IMATE JASJAR DEAD after ROM UPDATE

Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian

If you don't mind explaining more detail on the step that you have done on flashing your universal, maybe someone can come up with some help.

bambacik said:
If you don't mind explaining more detail on the step that you have done on flashing your universal, maybe someone can come up with some help.
Click to expand...
Click to collapse
Here is little explanation about upgrade process;
I upload firs and second file and it was 100 % success, but when I upload the third file in the middle something happen and message appears " restart your device" or somethink similar.
After that device dies, I try all combinations for HARD RESET and BOOTLOADER menu but without success.
Please any HELP
BR
Julian

Press camera+power and soft reset and check if it get into bootloader where u serial top.

hdubli said:
Press camera+power and soft reset and check if it get into bootloader where u serial top.
Click to expand...
Click to collapse
not working this combination any other ideas ?
Thanx in advance

Not camera+power+reset, but backlight+power+reset.

bambacik said:
Not camera+power+reset, but backlight+power+reset.
Click to expand...
Click to collapse
Same ... I tryed all the combinations to enter bootloader, but... no success

BatRambo said:
Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian
Click to expand...
Click to collapse
A) Plug your phone into your computer via USB.
B) Press the Power and the light button, not the camera.
You should see a faint outline that says USB.
It's now recognized in the Device Manager, run your ROM Update and fix it now.

Where is the "light" buttom? Please.

BatRambo said:
Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian
Click to expand...
Click to collapse
I had the same problem b4:
try this:
1) plug the usb cable in 1st
2) soft reset the imate (the screen should have a very light "USB" word)
3) run the rom update on the PC
4) after completion, hard reset (press the 2 "-" buttons on the imate) and press the soft reset bottun together.
5) when the screen is re-set, press "X" to exit instead of "0" to go to factory default.

still no solution

only jtag solution can turn on the phone
and i think its possible only in service center

HTC Polaris/Cruise (XDA Orbit 2) bricked.

Hi everyone,
I recently received an XDA Orbit 2, literally, charged it for 2 hours, and when it was full charged, I started using it, I had it for about 2 months now, and recently I changed my home Internet connection to wireless (It's a B & G connection) so my laptop connects fine, and when I tried to connect my XDA Orbit 2, it connected and then soft-reset itself, and now it just loads the O2 screen, then Windows Mobile screen with the volume controller and I can't do anything else so here's what I have tried so far:
- Soft reset
- Removed battery and SIM
- Since I can't access phone's menu at all, I tried to Hard Reset method by holding the 2 soft key, reset, and the power button - So I get the warning that everything will be lost and to press 'Send' to continue, so I press the green key, and soft resets and goes back to the same situation again.
- The latest thing I tried is to load the Hard-SPL into the SDCard which has been formatted to FAT32, so loaded the POLAIMG.nbh into the root. and loaded the phone into BootLoader mode (Camera and reset buttons). It loads the memory card and just says 'Loading ... ' I left it for about an hour, until the battery died completely (I'm sure it's not supposed to take that long). And still the same problem.
I'm not sure if this phone is now bricked, can anyone help me plesae. I really need this to start working again, I don't have any info. on it. (Everything was sync. previously).
Kind regards,

Since you havent really messed with SPL, i would say to take it back, since its still into warranty.

Thanks for the reply, I'm not actually in the UK and will be overseas for a while. I don't really mind experimenting so I would appreciate any advise on this matter. Thanks again.

htctytnowner said:
Thanks for the reply, I'm not actually in the UK and will be overseas for a while. I don't really mind experimenting so I would appreciate any advise on this matter. Thanks again.
Click to expand...
Click to collapse
I assume just boots into bootloader and then stays there?
If yes you culd try searching out a thread on MTTY and recovery from boot loader but I dont know how well that would work on polaris as I have not tried it yet.
HTH
Leon

Thanks for the reply, I heard about the MTTY process, but I've no clue on how to do it, since the phone can't connect in ActiveSync mode. Is there a thread or WiKi guide out there?

htctytnowner said:
Thanks for the reply, I heard about the MTTY process, but I've no clue on how to do it, since the phone can't connect in ActiveSync mode. Is there a thread or WiKi guide out there?
Click to expand...
Click to collapse
Only in the ELF forum
Here:
I'm pretty sure you can download MTTY from here and read through how to use it.
http://forum.xda-developers.com/showthread.php?t=347700
Also it is worth checking the wiki and searching
http://forum.xda-developers.com/showpost.php?p=2054848&postcount=38
Please do some research! I have not done this before and I have no idea what the commands do!!!
pqillu said:
You can try this:
Originally Posted by christonge
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
THX to christonge
Good luck.
PQillu
Click to expand...
Click to collapse

Please Heeelp!
I wa installing a rom from todopdas.es an my Polaris doesn´t pass from the screen where´s said "smart mobility", and R1.58.21.23 G 25.65.30.04H D 1.52.00.00, please what I can do?

You need to do Hard Reset, all information will be wiped off. To do hard reset, hold down the:
1.Press and hold the GPS/MESSAGING and INTERNET EXPLORER
buttons, and at the same time, use the stylus to press the RESET
button at the bottom of your device.
2. Release the RESET button, but
continue pressing the GPS/
MESSAGING and INTERNET
EXPLORER buttons until you
see this message on the
screen:
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press Send to restore
manufacturer default, or
press other keys to cancel.
3. Release the buttons, and then press SEND on your device to perform
the hard reset, or press any other button to cancel the reset.
Good luck.

Hi,
I'm using an HTC TC POLARIS100. Today I upgraded my ROM and SPL successfuly. If you're still in trouble and believe the same process will help, I will let you know the process followed.
GUY

my htc artemis is dead

i wanted to install HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R rom. but i get a problem of compatibility. after that i enter intro the artemis uspl folder in romupdateutility and i completed the process. after that my phone is not charging, not enter bootloader, do nothing. please help me.

kozminel said:
i wanted to install HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R rom. but i get a problem of compatibility. after that i enter intro the artemis uspl folder in romupdateutility and i completed the process. after that my phone is not charging, not enter bootloader, do nothing. please help me.
Click to expand...
Click to collapse
try to take out battery for a day...after that try bootloader and safe wm5 official rom installation from storage card....read forum 4 details
cheers

if your phone dead
hello
you can press butom of in left of phone for suond tag press it with trun boutom . main first press sound tag botoum and second butoum of turn on maen togther and then you can falash agin.
[email protected]

sirwana said:
hello
you can press butom of in left of phone for suond tag press it with trun boutom . main first press sound tag botoum and second butoum of turn on maen togther and then you can falash agin.
[email protected]
Click to expand...
Click to collapse
hello .. could you tell me more exactly what to do? i do not understand what button i should press. tanks a lot.

zikizile said:
try to take out battery for a day...after that try bootloader and safe wm5 official rom installation from storage card....read forum 4 details
cheers
Click to expand...
Click to collapse
i will try this. tanks

zikizile said:
try to take out battery for a day...after that try bootloader and safe wm5 official rom installation from storage card....read forum 4 details
cheers
Click to expand...
Click to collapse
zikizile i tried what you said but nothing..do you thing the battery is the problem? or my phone is locked by IMEI? please someone help me..

Here is the process with buttons.
Press the left phone upside button for voice record,or voice command, that where the volume button is, and with that button pushed, press the switch on button and you will get that tri-color screen, and there you are. From there you can reflash your phone.

[Q] dead device

Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!

rupesh baviskar said:
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
Click to expand...
Click to collapse
hi
if u can get ur tricolor screen then try this
connect the usb cable to pc and see if u get the USB words on the phone tricolor screen if so good try flashing any official ROM the same happened to my phone long back did the above got my phone back asuming u have done HSPL for ur phone if u have not done that then the only way is to take it to service
hope it helps good luck
thanks
hari

Wrong forum.. Touch P3450 is not a touch 3g , its the original touch (ELF version)
but i will try and help as i have owned both.
if your hardware buttons are not working it could be possible that your send and end keys are stuck down as this key combo brings up the hard reset you are talking about.
think you are going to have to open it as it sounds like a hardware fault, and if you cannot get into bootloader you cannot flash
if it was working alright before this is not the case, but either way you will have to fix your camera button and get into bootloader

Hd2 leo EU version bootloader problem Help plees

Hi all!
I have a big problem - last 10 hour see everything, but my problem no ansver -
hd2 eu version! I try install android!
1. step: install hspl
2. setep: Run task 29 format nand
and after I hold down key and power on and the telephon no step the bootloader mode!
I try some tips but no one cant help for me!
I try but evry try dont step boot loader!
Please help some one

You mean you completed step 1 of installing HSPL, and step two of doing task29 and after that you couldn't get into bootloader?
If yes, How did you manage to get into bootloader in the first two steps?

Marvlesz said:
You mean you completed step 1 of installing HSPL, and step two of doing task29 and after that you couldn't get into bootloader?
Click to expand...
Click to collapse
Yes
I try wol down and power but dont step bootloader
every time I tried, did not want to enter the bootloader. It would be nice if someone could help. This is one of my friend's phone and is often installed with my own, but there was no problem!
Now you have to enter it every time I try to not let you. Simply do not enter!

first time
i start the hspl4 and work is normaly wreck the phone no problem next step i run task 29 an run normaly and after is no step in to the boot loader

Are you using windows mobile 6.5?

Marvlesz said:
Are you using windows mobile 6.5?
Click to expand...
Click to collapse
yes before i start this metod i using winmo 6.5.

Just what I thought, I assume you have mistaken activsync in winmo for the bootloader. And since Task29 removes your WinMo rom that means no more activesync to flash roms. And you thought being on the blank htc screen and pressing vol down would get you to activesync.
If my assumption is correct then do the following:
Turn off your phone, Hold the "Volume Down" button .. and turn on your phone, release it when you see a tri-colour screen. From there, connect the USB cable and flash as if you were in ActiveSync.
---------------------------------------------------------------------------------------------------------------
EDIT
There is no reason for your phone to not go into bootloader after you have successfully flashed hspl and task29 except this.

I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance

Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
I have tried them!
Despite the bootloader screen, but you are not willing to appear!
You do not want to come if you would have to go the wrong thing, but so I can not connect to the computer usb.

Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
Are you doing this while the phone is off?
Or you're doing this while you're on "HTC Screen" ?
Are you sure you have successfully flashed HSPL and done Task29 ?

Taller2222 said:
I try some combination
- vol down +power
- vol dovn +soft reset
- usb in+vol dovn+power
I need another combination or another chance
Click to expand...
Click to collapse
You are trying to get to the tri-colour screen, yes? Where the screen has 3 colours?
1. Power off phone
2. Remove battery
3. Hold vol down key
4. Insert battery WITHOUT LETTING GO OF VOL DOWN
5. Power on phone WITHOUT LETTING GO OF VOL DOWN
6. Enter bootloader mode

Marvlesz said:
Are you doing this while the phone is off?
Or you're doing this while you're on "HTC Screen" ?
Are you sure you have successfully flashed HSPL and done Task29 ?
Click to expand...
Click to collapse
the flash is successfull install the hspl an task29 too. I sure tis fact
The telephon akkumlator is off an beck and i try volume down + power on and no stem bootloader

jwchips said:
You are trying to get to the tri-colour screen, yes? Where the screen has 3 colours?
1. Power off phone
2. Remove battery
3. Hold vol down key
4. Insert battery WITHOUT LETTING GO OF VOL DOWN
5. Power on phone WITHOUT LETTING GO OF VOL DOWN
6. Enter bootloader mode
Click to expand...
Click to collapse
Its not work i try so many time in this method

Nobody has any extra ideas on how to throw into bootloader mode! I have been completely used up.
I have tried several methods, but none of them took me to success! : S

An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)

Hi every one!
The problem is not resolved! Everything is done as it is in the descriptions. Probably the volume down buttons on the problem, or around it.
I decided to take it doctor uncle, so I already had treatment for the doc!
Thank you very much everyone for your help and advice. If I learn what went wrong and how can this be remedied share with everyone, if someone in that position would not be a problem any more! Or just do not be nervous: S
Have a nice day everyone!

You read this thread yet you missed a crucial post i think; a possible solution is offered there:
T-Macgnolia said:
You may have a faulty volume button ribbon that is causing you not to be able to boot into the bootloader. Check out this thread you will see what I mean. Read post #10
Click to expand...
Click to collapse
It very much sounds like your situation...

Diegis0n said:
You read this thread yet you missed a crucial post i think; a possible solution is offered there:
It very much sounds like your situation...
Click to expand...
Click to collapse
Thanks
I see this post befor, but i don't like disassemble the Phone Monday night is finish! (say the doctor) And i don't have another flex cable, i can't try this at my home.
But thank's the post and everything.

Found the problem!
The bootloader is delete from the ram -need JTAG, this day is ready the phone!
I do not use anymore task29

Taller2222 said:
Found the problem!
The bootloader is delete from the ram -need JTAG, this day is ready the phone!
I do not use anymore task29
Click to expand...
Click to collapse
glad you found where your problem lay.
But for your information, Task29 does not wipe off your bootloader