As I said My TyTN II is frozen at the Smart Mobility screen and restarts constantly. I have tried soft restart, hard restart and nothing changes. When it happened I had to soft reset my phone after my "Phone in the phone" stopped working proplerly. I hit the soft reset button and the it just freezes in Smart Mobility and then restarts, vibrates, freezes and etc.. Soft restet does not do anyting, hard reset goes through the process of cleaning and reseting and then nothing, the same problem keeps coming up. Does anyone have any ideas?
why not posting in the correct forum?
http://forum.xda-developers.com/forumdisplay.php?f=376
Related
Hi,
I've been running my 8125 clocked to 275mhz for over 4 months. This morning I decided to set omapclock to 300 just to see if it'll run at 300mhz. Right after I did that, the phone froze so I did a soft reset. Now it's just keeps on resetting!!!! non-stop and I tried a hard reset (hold down Comm. and Voice command buttons and hold reset) and it does not do a hard reset as it just keeps on resetting and resetting.
PLEASE HELP!
Pull your battery, wait about 5 seconds, put it back in, and try starting your phone. That should stop the cascade soft resetting.
I tried installing spb pocket plus and, just after it installed, my Wizard didn't seem to be responding so I tried soft resetting it. On booting up it showed the O2 splash screen and then the Windows Mobile screen but nothing else. The screen goes dark as the backlight is turned off but you can still see the Windows Mobile screen showing. Each time I soft reset the same thing happens.
I've tried soft resetting about 4-5 times now and the same thing happens again. I've even taken the battery out and put it back in and the same thing happens. I was going to try reinstalling the O2 XDA firmware but as I can't get the Wizard to connect to ActiveSync I can't do that.
Has anyone got any ideas? At the moment I'm without my phone & all the PDA functions on the phone and I really want it back.
Thanks for any advice.
Matthew
Think you may need to do a hard reset to put it back to it's factory state. Should work then.
Thanks, I'd been trying to do a hard reset but it didn't seem to work - then it occurred to me that I was actually pressing the wrong button to confirm the reset!
Hard reset works and gets it up and running again although, from checking, it seems that there's some problem between sdp pocket plus (3.0.0.3888) as I've now installed that about 3-4 times and each time, after doing a soft reset, the Wizard crashes and won't respond.
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Hold down (and keep holding) the camera button while depressing the reset button. Hopefully it boots into a tri-color screen. If so, plug it into the USB port and, at the bottom of the screen, it should display "USB". If that happens, flash it with a *known good rom*, such as a stock T-Mobile rom. Don't try to be clever, the object is to get the phone working. Once the flash has started, *get up and walk away* for 15 or 20 minutes. Don't check in on it, leave it alone, It takes some time. When you hear it's little chime, it's done, rebooted and ready. If any of the above doesn't happen or the flash outright fails, then you may have trashed it permanently. It doesn't sound like it's beyond hope yet, however.
i have the wizard and im having the same problem after installing a ROM from this website...it just goes to the windows mobile screen with the numbers then shuts off...id really like to save my phone is there anything else i can try because that hard reset thing isnt working
axxeman001 said:
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Click to expand...
Click to collapse
Well same thing happened to me a few days back.. I had to Cold Reset [which restored it to factory defaults], but hey I got it working again..
Press Communication Button [Top Left] and Record Button [Top Right] at the same time and use the stylus to soft reset..
You will get a black screen, asking you to press "Send" to reset to "Factory defaults"
Press "Send".
Hopefully you should get your MDA working again ...
I read the "Above" in the HTC Wizard Service Manual [PDF] on the *last page* under the "Cold-reset" Section..
I just installed the BatteryStatus today plug in and it was working fine until i turned on the option to show the CPU speed. Then it just hung up. Now when I soft-reset it hangs when loading the today screen. Some of the plugins load but it hangs before BatteryStatus loads, probably while loading it. Any way I can get to my system to change that setting? I would prefer to not do a hard reset. But if I do, how do I do a hard reset?
Sounds like a hard reset to me....Hold down the two keys with the dot's on them next to your phone buttons and hit the reset button while pressing the reset switch and hold them down for a second or two longer. If you have a Memory card in on the 6800 I hear you may want to take it out if you don't want it cleared as well...good luck.
hmmm I went to do a hard reset... saw on another site that you press all the buttons and press reset. I pressed all the side buttons OK, Voice, On, Comm, Camera and hit the reset.
It went to a screen with red, green and blue (i think) bars and said USB at the bottom. Then I unplugged it from the USB and it switched to say serial. And it just stayed there. I didn't know what to do so I just soft reset it at that point. It then booted up and was working fine. Looks like the changes I made since the last soft reset had been cleared (I think) and it was now working fine and all my stuff was still on my phone (it doesnt look like it did a hard reset).
Was that not a hard reset that I did? or was it something else?
Sounds like you entered bootloader mode. I'm surrprised that a SOFT RESET took you back.......
You just did a Soft Reset from Bootloader mode, which to my knowledge is exactly the same as a regular Soft Reset.
A Hard Reset wil completely reset your device to original ROM status and wipe out all of your info/contacts/mail... ect.
If the Soft Reset fixed the problem then good deal.
I installed same app, had same problem and did hard reset. My problem was getting phone service working again. About 15 min. with VZW connection tech, entered a 26 digit number authentication key through EPST.exe system program to get my phone service back.
I also had the same problem as well. With a battery status deal like what your describing. All i did was soft reset a **** load of times and plug in my pw real fast and it came back. I have a scrolling task now that display all of it with 0 problems. I have it if you want it. Pm me your email.
Weird, I had tried a soft reset a few times and it kept coming back with the same thing, hanging halfway through loading the today screen. Maybe I just got lucky that time.
try this, i like alot with 0 problems
guys i've installed spb pocket plus and I didn's like it and removed it, after removal the device wanted soft reset. I restarted it but its stucked on the windoes mobile screen ... what to do ??
first take out battery for 30 mins then retry.
if that doesnt work and soft reset doesnt work, then im afraid its hard reset time and you will loose all your data on your device you know how to hard reset yes? press and hold camera & comm button and keep pressed, then soft reset keeping buttons pressed until warning screen comes up asking you to hit green button.........
thanks my friend the xda is now like brand new
no problems, congrats