Hi all.
I have a uk tmobile mda compact iii which I have just upgraded to wm6 using their official site here : http://www.tm-phonedownloads.com/sd_compact3.html
Everything works fine and I backed up etc before upgrading, however, my activesync session is not syncing any of my calendar appointments from Outlook.
I am tearing my hair out! Has anyone had any similar problems?
try deactivating "advanced USB mode" in START-CONFIG-CONNECTIONS
impossiblevoices said:
Hi all.
I have a uk tmobile mda compact iii which I have just upgraded to wm6 using their official site here : http://www.tm-phonedownloads.com/sd_compact3.html
Everything works fine and I backed up etc before upgrading, however, my activesync session is not syncing any of my calendar appointments from Outlook.
I am tearing my hair out! Has anyone had any similar problems?
Click to expand...
Click to collapse
u need to establish new connection the best thing is to delete all ppc in ur active sync and re connect or
uninstall active sync and re install it as an easier solution
Related
Hi Folks,
Have startet with my new MDA Pro and have problems to sync with AS4.0!
I tried to hardreset the device and to reinstall AS4.0 but nothing helps ;-(
I want to sync ONLY Contacts but AS habgs with "attention" and when i have a look in the "WCESMgr.log" i see:
---------------------------------
10/02/2005 09:13:55.250 p(2084) t(3464) AirSyncStatusXML -> Process XML: <Error Partner="{236E3A71-A411-42D4-870E-E8CBF7110C28}" Code="8503001c" Title="Achtung" Body="Die Synchronisierung konnte nicht abgeschlossen werden. Wenn das Problem weiterhin besteht, löschen Sie Synchronisierungspartnerschaften und stellen Sie sie erneut her."/> - ASStatus.cpp(617)
---------------------------------
i deletet dhe partner**** to the device but the problem stays!
any ideas ??
pbelcl said:
Hi Folks,
when i have a look in the "WCESMgr.log" i see:
---------------------------------
??
Click to expand...
Click to collapse
Where can I find/read more about A.S. Because it is the first time I hear about WCESMgr.log
Huib
I'm not sure this will fix your problem, but it has worked for me on my jasjar and my wifes MDA Pro, but it is crude and tiresome. I have the same problem on my newly formatted PC but my wife syncs her MDA Pro with her laptop no problem. However Active sync always runs in the background on our Universals.
1: Uninstall Activesync on your PC and delete the Active sync folder in your programs folder, then re-boot PC.
2: Meanwhile on your MDA Pro, start up Activesync and go to menu/options and delete the relationship, so there is effectively nothing to sync with on the Pro. This should stop it from popping up all the time, but has the obvious drawback that you cannot keep synchronising your data, contacts and appointments etc.
3: Re-install Activesync on PC and connect your MDA to establish new partnership. You will now be able to sync and install software, but after this sync (if you have the same problem as me, you won't be able to again unless you repeat steps 1-3).
I know this is not a good solution, especially if you have to synchronise vital data with PC and Pro, but this is sufficient for now, for the purpose of installing new applications that have no .cab files that you can copy to SD card.
Hope this helps a little.
Thanks for your hint. it is exactly as you said!
after deleteing the profiles i can sync ALL information on my device.
at the next time i cant sync because no connection is possible ;-(
the question i have is:
is my device damaged or is the active sync software the problem?
how did you solve the problem at last ?
Hi Folks,
i have now another device with WM2005 (Wizard) and nearly the same problems with active Sync!
as nobody wrote to my thread i hope that everybody of you can sync his WM2005 device!?
Whats about access databases?
i use german version of active sync 4.0.0 Build 4343. is there any newer versions that work better than mine?
Use MDA Pro with Active Sync 4.1
I had the same problem with AS 4.0. With AS 4.1 I could finally sync the MDA Pro.
Re: Use MDA Pro with Active Sync 4.1
simba said:
I had the same problem with AS 4.0. With AS 4.1 I could finally sync the MDA Pro.
Click to expand...
Click to collapse
Not to discourage anyone, but I'm running AS 4.1 and I still have the exact same symptoms. I've already de-installed everything (including old drivers and purging old ActiveSync registry settings, removing old directories, etc) and re-installed, but synchronization is more of a hit-and-(mostly)-miss affair.
Thank god for Exchange ActiveSync and unlimited GPRS plans...
Re: Use MDA Pro with Active Sync 4.1
simba said:
I had the same problem with AS 4.0. With AS 4.1 I could finally sync the MDA Pro.
Click to expand...
Click to collapse
Thanks Simba, but where can i download a version greater than 4.0?
Could you post a link??
@stamppot
Thanks too! I will give it a try because i dont have an exchange server so i MUST sync locally ;-(
MDA pro problems with Active sync
Guys,
I can't get to connect my mda pro with active sync 4.0/4.1 and 3.8.
I have re-installed but that did not help.
It just cannot find the device.
Would appreciate any help in this matter.
MDA pro problems with Active sync
Guys,
I can't get to connect my mda pro with active sync 4.0/4.1 and 3.8.
I have re-installed but that did not help.
It just cannot find the device.
Would appreciate any help in this matter.
Re: Use MDA Pro with Active Sync 4.1
pbelcl said:
simba said:
I had the same problem with AS 4.0. With AS 4.1 I could finally sync the MDA Pro.
Click to expand...
Click to collapse
Thanks Simba, but where can i download a version greater than 4.0?
Could you post a link??
@stamppot
Thanks too! I will give it a try because i dont have an exchange server so i MUST sync locally ;-(
Click to expand...
Click to collapse
You can Active Sync 4.1 on the ftp server of Xda-developers.
cheers
8503001c Error
I have an O2 XDAII (with WM 2005) and I get this error message when I try using Activesync4.1 as well. The Activesync I am using is downloaded from MSFT. I have tried all the other suggestions in this forum but there are not fixes that can be had by following those suggestions. The one thing I can say is that it has to do with email in my situation. If I sync everything except for Email, then my activesync works... PLEASE HELP!
Geez! Freakin' Microsoft, seriously! I hope they read this forum.
I keep losing the ability to sync at some point. I don't know what's causing that. I now think that it happens when the phone locks up and you have to use the hardware reset button instead of a software button on your screen.
Considering how many people have this problem, you'd think M$ would do something about it.
The error code is 8503001c
I forgot to mention one important point. The error code is 8503001c. Buzz, help us! Isn't there some way to do a search through the binearies to find the explanation or reason for this error code ? That would probably give us a specific reasonj as to what the issue is, tand then we could rectify it -
I've searched and haven't found any help at all with this. I'm trying to sync my 9100 with outlook 2003 sp2 as indicated in the title. I can establish an activesync connection and sync notes and files as well as explore the device and install software, however whenever I try to add tasks, contacts or calendar to the sync options I begin to get an error.
Basically what happens is that it will save the settings and then I get an incomplete sync with an error code of: Support Code 85010014. I've searched the microsoft site and can't find this code anywhere. I've followed the activesync 4.0 troubleshooting guide, but since I am establishing a connection that doesn't seem to be the problem. I've been a PocketPC user since day one so I'm not new to any of this, but I'm really at my wits end with this issue. I've hard reset and reinstalled activesync more times than I care to count. I can also still sync with my old jam just fine. Any help would be appreciated. Are there any unique configuration issues for 5.0 devices relative to Outlook 2003? Does it not like running in cached mode? Thanks in advance for any help.
If you are trying to connect to your home machine try:
Delete Any Partnerships From Activesync & the Device
Uninstall Activesync
Uninstall (Not Repair) Outlook - you'll probably need your Office CD for this.
Reboot
Reinstall Outlook
Reinstall Activesync
Cross your fingers
This has seemed to work for some people but not everyone.
There is a known issue with folder redirection on corporate networks. The Activesync team is aware of this and an upcoming version of Activesync will address it. For the moment the the only workaround is to turn off folder redirection. Unless you are a sysadmin, this is not likely an option for you. If you are in this situation, then unfortuantely you'll have to sit tight - like me.
Hope this helps.
db
I also had to uninstall both the latest outlook junk update as well as the junk update from office sp2 to get as4 working properly.
Success. What worked was to delete my current Outlook profile and account and then set it up again. The first time I did it I didn't delete the outlook.ost file and the new account settings just referred back to that file and I had the same problem. The second time around I deleted that file, configured my outlook settings and got that working and then syncing started to work as well. It took a little time, but has been working well since then. Thanks for the help. It's really strange that my jam and ipaq continued to sync thru AS4.0 just fine, but the qtek wouldn't. Appears to be some weird combination of WM5.0 and AS4.0 that causes the problem.
I see a growing trend where a lot of people are having trouble syncing their phones with MS activesync 4.5. Is there a solution to this problem?
Does activesync 4.5 only work with WM6 and not WM5? I just reloaded all software on my puter an d put 4.5 on in readiness for loading WM6 on my phone but now it wont recognise my phone......
thanks
Scott
I am using Activesync 4.5 and no problem at all.
MontAlbert said:
I see a growing trend where a lot of people are having trouble syncing their phones with MS activesync 4.5. Is there a solution to this problem?
Does activesync 4.5 only work with WM6 and not WM5? I just reloaded all software on my puter an d put 4.5 on in readiness for loading WM6 on my phone but now it wont recognise my phone......
thanks
Scott
Click to expand...
Click to collapse
Scott, what version of WM6 you are using? I had that (sync) problem with the first version of Mun_Rus WM6 (due to OneNote issue in the PPC registry file). After using Mun_Rus second version of WM6, it's sync perfectly everytime.
ok, got it working but now it says
"cannot sync with the outlook profile you are using, because a different profile was previously set up or the profile is password-protected. Please open outlook using the appropriate profile.
Support code:8503001f"
Now i only have one single profile on outlook but have changed a few of the options but nothing to do with profile etc. Activesync 4.5 says it has synced with outlook (no attention req'd messages), but there is no extra stuff in outlook- mostly the tasks and calender i am after.....
What am i doing wrong and how do i fix it?
MontAlbert said:
ok, got it working but now it says
"cannot sync with the outlook profile you are using, because a different profile was previously set up or the profile is password-protected. Please open outlook using the appropriate profile.
Support code:8503001f"
Now i only have one single profile on outlook but have changed a few of the options but nothing to do with profile etc. Activesync 4.5 says it has synced with outlook (no attention req'd messages), but there is no extra stuff in outlook- mostly the tasks and calender i am after.....
What am i doing wrong and how do i fix it?
Click to expand...
Click to collapse
Care to give more info on your PC software? E.g. Outlook version, OS version, Active Sync built etc ?
Also pls provide your ROM version (Dopod Original WM5, or cooked rom etc ..)
Exchange 2003 SP2
Windows XP Sp2
ActiveSync 4.5
mUm ROM
No problem
alvinlim28 said:
Care to give more info on your PC software? E.g. Outlook version, OS version, Active Sync built etc ?
Also pls provide your ROM version (Dopod Original WM5, or cooked rom etc ..)
Click to expand...
Click to collapse
Running Dopod WM5 (waiting for official dopod WM6 rom so copy extended rom from here to a cooked rom).
ROM: 1.23.707.5
Radio: 1.33.30.10
Running XP, Office 2007 (Outlook 07), Active sync v4.5.0 build 5096
Thanks for your help...
God, dammit, yeah, after three month trying to solve this I finally found a solution. If you set your @live.com or other Outlook Connector created data-file as default, then Exit Outlook, disconnect your PPC (WM6/WM5 device). In WMDC or ActiveSync ( I made it through WMDC on Win Vista ) end your partnership. Then connect your device and set up new one. Add whatever you want to sync with outlook and you are done. It works flawlessly.
Thank you ! Thank you ! Thank you !
HRUDKA said:
God, dammit, yeah, after three month trying to solve this I finally found a solution. If you set your @live.com or other Outlook Connector created data-file as default, then Exit Outlook, disconnect your PPC (WM6/WM5 device). In WMDC or ActiveSync ( I made it through WMDC on Win Vista ) end your partnership. Then connect your device and set up new one. Add whatever you want to sync with outlook and you are done. It works flawlessly.
Click to expand...
Click to collapse
Man, you're the smartest ! Thank you very much for this advice. It is great ! It really worked for me too. Thank you very much !
lid2cip said:
man, you're the smartest ! Thank you very much for this advice. It is great ! It really worked for me too. Thank you very much !
Click to expand...
Click to collapse
sir where i download active sync 4.5 showme downloadlink please iam new member
RAMARAO said:
sir where i download active sync 4.5 showme downloadlink please iam new member
Click to expand...
Click to collapse
You can download it here
Hi,
I'm pretty lost here, trying to pull information from the net but don't seem to be heading anywhere..here's the problem.
I'd like to sync my contact information on multiple PCs using my Hermes on Black X WM6, currently using a free exchange account with Mail2web.com, however I can't allow activesync to sync with both exchange and outlook, and if i try to switch between the 2, i often get duplication of data..anyone can advise if there's anything I can do?
Thanks in advance.
Hi,
I have the same problem and curious to the solution. Can anybody help?
Thnx
I have searched the forums and can't find an answer.
I have recently upgraded my M3100 to the official WM6 thanks to the very usefull advice on this forum. I am now running WM 6 on my M3100 using Active Sync 4.5 (Latest) and Outlook 2003 on my desktop.
The problem I am having is that some appointments in my Outlook 2003 Calendar are not being transfered to my M3100. To make matters worse, some appointments appear and disappear at random intervals when I re-sync the device. It has rendered it useless as an appointments diary, which is 50% of the reason why i have a PDA phone.
I have searched extensively on Google and on here. I can find plenty of people experiencing the same problems, but no one seems to have found the answer.
As it is a well reported issue, I wondered if anyone here had a solution?
Regards
Tom
Either downgrade back to what WAS working before, or consider upgrading to a newer version of outlook...
Hello,
I have the same setup you have and have never noticed that behaviour. Well, actually I recently upgraded to Outlook 2007, but I never had problems with the appointments using WM6, AS 4.5 and Outlook 2003. A couple of things you can check:
1. Have you checked the AS calendar settings to synchronize "ALL" appointments?
2. Are you running some rules in Outlook that automatically delete or move appointments?
3. Maybe conflicts between PPC and PC? Is AS setup to automatically overwrite the PC when in conflict or viceversa?
lately i have been having problems with my active sync. i have schaps 4.31 and sc 4.5. when i plug my phone in, the computer says usb device not recognized? what is wierd in the morning everything was fine and now in the evening i am having problems?!?
i would
1 try another usbport
2 uninstall as and make sure to remove all as settings from regedit
and reinstall it