Hey folks, Tried searching for this for days, but sooooo many bluetooth 10 mile long threads..
I have 2 P4000's (via Telus) in front of me. One has both options for "Set as Wireless Stereo" and "Set as handsfree" after clicking and holding on a paired (ticked as handsfree and ticked as wireless stereo on install) S9 headset, the other only has "Set as handsfree".
Any ideas?
Tried uninstalling, re-pairing, and no joy. I tried the usual registry change for switching to stereo, and increasing the sound quality that are on the HTC Wiki page, but no joy... I am thinking master reset and start again on the non working device... but I would rather not if I can get away with it...?
Help appreciated!
Scott.
Related
i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
Hope someone can help me with my problem (Nothing found on XDA search).
I have a BT620s headset and it works great, both for stereo music and as a handsfree set.
The problem is, if I disconnect the bluetooth or answer a call I always loose the Wireless stereo. Under the BT devices is it still shows as selected but I always have to do a refresh reselect "wireless stereo" and save it again to get it working each time.
Is there something I can do to make it stick ie: registry setting?
Thanks
confirmed
Hi to All,
i have exactly the same problem. Actually, in my case even an alarm or a reminder switches the A2DP to mono and i am not able to go back to stereo without a soft reset....
Anyone have an idea?
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea
mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.
Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time
Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music
Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.
Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!
No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!
i just got a pair of philips SHB6100 bluetooth stereo headphones/handsfree, and i'm seeing a strange issue.
The first time i pair the headphones with my Mogul they work great throught the standard WMP. If i walk away from the headphones (with my phone) so that they get seperated, i cannot get them to work again once they come back in range without removing the bluetooth device, and re-pairing the two devices. When the two devices come back in range, i can initiate voice activation from the headphones, but no audio from WMP is sent, reopening WMP and soft resets don't fix the issue.
Has anyone seen similar problems?
I'm using all stock drivers / rom.
i have the same problem .
The way i found around this is to go to Bluetooth manager .Press on the name of your head phone on the list .And sellect set as wireless stereo.
and they pair up again.
Thanks ace29ace
ace29ace said:
i have the same problem .
The way i found around this is to go to Bluetooth manager .Press on the name of your head phone on the list .And sellect set as wireless stereo.
and they pair up again.
Thanks ace29ace
Click to expand...
Click to collapse
Yep, the same thing here with my Sony HWSBTA2W Bluetooth Transciever. Oddly though, my Moto S9 headphones work without having to do this, all I have to do is do something on the headphones like change volume and they instantly pair up again.
I have been reading many threads on getting the "stereo audio" connection to auto connect fot BT Stereo headsets. It seems that when you pair it the first time, both "Hands Free" and "Stereo Audio" are working. When you disconect your headset and reconnect it again, only "Hands Free" connects.
I have tried A2DP toggle and A2DPSwitch, but they dont seem to work on the HD2. A2DP toggle did work when I had my old Samsung Omnia i900, so I can assume that its something to do with the HTC Phone Bluetooth stack
Each time I want to use the BT Stereo headset, I need to go to settings/menu/all settings/Bluetooth/590Plantronics and expand + and select "Stereo Audio". They then connect.
What I would like to do is until there is a fix for this, to reduce the number of taps, is create a shortcut to the Bluetooth Control Panel that shows the 590Plantronics device.
Is this possible?
Thanks Chris
Just make a shortcut to Windows\BTManager.exe and add it as a quicklink.
hi,
i have a jabra 3030 and a motorola s705 and both are reconnecting (handsfree and stereo audio) properly, when i turn them of and on again. when i go out of range (eg. forgot the mobile in teh car), when i come back the handsfree connects direct, and the setereo audio after i press the play button once. maybe this works for you also.
regards mad
I installed AutoA2DP on my phone and ever since, whenever I turn on my headset, it always connects as both stereo bluetooth and headset. I haven't tried it on an HD2 but you should definitely try it out.
I found the .cab of AutoA2DP awhile ago but forgot where I found the download link. In any case, I have attached it for your convenience.
D.W
Hi kilrah, thanks for your advice! That cuts out a few blinkin clix now and will do as a work around till this fiasco is solved, lol
I also noticed something very bizzare, and it is confirming my suspicions that HTC is in cahootz with MS or Widcomm or both, lol.
I tried using auto a2dp as suggested by GurWu, leaving the a2dp.ini file as wmplayer.exe. I then deleted the Plantronics from the system, re-paired them and what should spring to life after turning on the cans? You guessed it..WMP all paired up with HF and Stereo Audio. Turned off the headsets, turned them back on again and sure enough, WMP launches and plays thru the headsets.
All good, except I wont use WMP as it STILL doesnt have an EQ (Not getting in to why one needs an EQ or not here, lol)
No problems, I thought, Ill just set the a2dp.ini to pocketplayer.exe (my preferred player) turned on the headsets and.......nothing....no pocket player came to life.
Doing a manual launch of PP revealed that the headsets were only paired as HF, so back to my original problem.
Renamed a2dp.ini back to wmplayer.exe and it all works as it should....mmmmmm...does this wreak of a MS/HTC/Widcomm ploy? LoL
PS @ mad: When you said press the play button, were you referring to the play button on the software of your chosen media player or a hardware button as I dont have a play button on my HD2
PPS: Got a reply bacl from a2dp toggle author, says that it only supports M$ BT stack :-(
Cheers Chris