Has anyone used this app? it gives option to add sentences when typing. i used it on wm5 but it doesn't seem to work on wm6. Is there anything similar out there?
here's link to app:
http://www.smartcell.com/Web/pc-17-4-textplus-for-pocket-pc.aspx
you might want to try TapText
http://www.dinarsoft.com/taptext
Related
Hi there,
THis is a strange one:
On a fresh hard resetted K-jam, I'm not able anymore to select other input methods than the standard installed ones. I tried with Fitaly, MessagEase and TextPlus but the show up in the list but when I select them, I get the standard keyboard!
The strange thing is that when I bought my K-Jam, Fitaly would work. Then I noticed that Fitaly wasn't completely compatible with 2005 so I uninstalled. Of course ( :wink: ) this wasn't done properly by the OS so I manually removed some keys in the register so Fitaly wouldn't show up anymore in the input method list. From that moment on I couldn't select any other alternative input methods anymore.
I thought a fresh hard reset would solve it but I guess not...
Why not? :?:
Wouter
Same problem here. Have a 9100 and no special input software installed. I want to use the phonepad input, but when I configure it in the setting menu it switches back to the basic keyboard. Anyone have a solution for this problem?
There's a standard registry hack to do this. search for sip and registry or check the usual places.
Otherwise, use tweaks 2k.
Otherwise, use my sipswitch program as a last resort.
V
Hi Vijay555,
I checked your website. Nice tools there! :lol:
But were can I find the sipswitch and why use it as a last resort? :wink:
Wouter
on this board. search for sipswitch.
it needs updating before it goes on my site, but it works, i hope!.
v
Hi Vijay555,
The download link to the sipswitch file is not working anymore. Do you have a copy of the file somewhere?
Wouter
wouterk: try it again, I've updated the post on that thread, but here you go anyway!
Links to the app.
V
Hi Vijay555,
The download is working but the program doesn't do the trick I wanted (change to the input of my choice)
Too bad but thanks for the program!
Wouter
does it work at all, eg switch to keyboard with the keyboard command line parameter etc?
I've never tested it on WM5 but it should work...
V
Hi Vijay555,
It does work on a commandline for:
Flexslide and Speedscript but I'm able to switch between those two most of the time even without your tool. :wink: It does work somehow because just now I couldn't get Flexslide activated and with your tool from the command line it worked!
It doesn't work somehow with MessagEase. I can't switch to MessagEase at all no mather what I try. So there must be something different in MassagEasse compared with the other two... :?:
Wouter
It sometimes depends exactly how the SIP is named. I've not tried it on many odd SIPs, but if you read the SIPSwitch thread I know some peeps had some experiences and advice on oddly named sips. Tell me how it goes.
V
On my dopod 900, I use keyboard SIP and PlumSIP, I wanna switch between then quickly.
But Fn+SYM or PQZ doesn't work properly,I try vijay555's SIPSwitch,but it's hard to use.
So I wrote one to switch between different SIP.
First map it to one hardward key,
Then press the key, it change the SIP to next SIP in the system SIP list and show the input panel.
BTW , if u want switch between some peculiar input method, u can use POCKET TWEAK to hide others.
Sorry for my poor english.
thanks a lot !!!
it's what I, not only me but all the chinese, need.
thanks million times.
I also want to know the exact way of hiding some input method, as I have been searching for the POCKET TWEAK you mentioned, but don't get any outcoming.
u can got it from here
http://tillanosoft.com/ce/ptweak.html
You're really unbelievable! FTSwitchSIP comes out just one day after you posted to try to find some tool to switch SIP. Many Chinese users of Dopod 838 and 900, known as Wizard and Universel here, have been searching for such a tool for a long time. I am just one of them who is lucky to find it out first.
I've shared your amazing tool in the pdafans forum, I hope you won't mind.
http://bbs.pdafans.com/viewthread.php?tid=203195
Thanks a lot.
Got PocketTweak.
there seems no direct way of hinding input method.
Would you show me some hints?
I think it has a bug here. I have been using the rom of Traditional Chinese. Got several input methods. And hide some of them with Pocket teak. And install CE and PlumSIP. Now I have 3 input methods. 1. Zhuying ( as default) 2. Mengtian Hand Writing 3. PlumSIP. At the beginning, the switch seems ok. I am very glad and thankful. But when I swicth several times, it stuck and both plumSIP and Mengtian displayed. The PPC is hanged. Only reset can make it work.
Thanks your reply.
I'll update it on this weekend.
I wanna add some setting and test it again.
thanks a lot.
I've been searching for such software a lot.
error when toggling to pocketcm keyboard
It toggles to all the oem sips but when it reaches pcm keyboard in the list I get "sipsetcurrentIM Error=0".
Any ideas I'm getting really frustrated with nothaving a decent sip.
msiviter said:
It toggles to all the oem sips but when it reaches pcm keyboard in the list I get "sipsetcurrentIM Error=0".
Any ideas I'm getting really frustrated with nothaving a decent sip.
Click to expand...
Click to collapse
the tool works fine.. maybe u can try to hide sme OEM sips u dont use and try awain.. may be a memory issue
How do I go about that then - just delete the registry reference to them?
Also can anyone give me a tip on how to locate specific bits of the registry - it took me ages to find the registry entry to pcm keyboard (i'm using regedit).
Ta
works perfectly with ipaq hx2495 (WM5)! thanks for posting this cool app!
OMG! Thank you for this. Actualy, I figured out that it's a last thing that I need to be happy with my Artemis. To be able to change small stylus-friendly SIP which I'm used to use in my office to somethig finger-friendly when I'm on the streed by HW button.
Thanks!
What about new version with ability to setup two SIP to cycle just between them? - but as I said, I'm completely hapy as it is.
I've searched but I haven't found it yet.
What I want to do:
I would like to have a shortcut that can be assigned to a hardware button that hides the SIP on my device.
Reason:
I'm using the threaded SMS program of a famous manufacturer and it's really geat. The problem however is that when colsing the application the SIP doesn't disappear.
I took a look at MortScript but it doesn't seem to be able to do this.
Hope someone can help me out here
Years back, in fact the very first app I wrote, I wrote SipSwitch to let you change SIP, or hide the active SIP. I think since I wrote mine other better apps have been released, search for SIPSwitch to find them.
Here's a thread to my old one:
http://forum.xda-developers.com/showthread.php?t=242503&highlight=sipswitchhttp://tim.rawle.org/simpsons/quiz/images/quiz4pics/q1.gif
V
Works very well! Thank Vijay555!
Is it possible to edit the dictionary, to add words often used but not included, and to remove words that have been automatically added after being used, but which are typos!
You could try this.
http://www.freewareppc.com/utilities/wordcompletiondictionaryeditor.shtml
I haven't used it myself, so if you do try, let me know how you get on with it please.
Hmm, was hoping for something simpler, but seems that there's no option to do this without using some 3rd party software
also see http://mobile-sg.com/software/?p=DictMgr&platform=ppc
but neither of these really work with WM6...
I have WM5 not 6
Anyone know of the codes (0x##) for the xperia keyboard or know of any applications I can use to determine the values? I want to map the au key to change input methods between english and japanese. sorry if this has been asked before, I wasn't really sure of what terminology to search for and I couldn't find much for keycodes or keyboard values.
Thanks!
As I remember, the PQzII app has some sort of test app that monitors the keypresses and outputs the code for each button, but I can;t remember if it works on the X1, I only really used it on a Touch Pro.
No link either, my firewall at work is pretty restrictive, but do a google/xda search I'm sure you'll find it.
ya I tried the pqzII app but I couldn't get it to work on the x1, its called pqzII_check. maybe I'm using to wrong.
hm I tried it again on a new room and it works, I had a driver error before. thanks for your help!
With AEButtonsPlus you can add new buttons to associate new actions with, and it shows the corresponding key-code. But don't know if it works in a trial version too.