Hi friends,
i have a problem with the speaker (for ringtones, hand free ecc...), I think is broken maybe for too use.
I need this spare but i don't know where I can buy it.
Can any one help me?
thank you very much,
Johnny Melonari
Related
ok this is a bit funny
handsfree earphone works,,,but the ear phone in the mda compact doesnt work
the normal sound speaker works,,just not the phone speaker
ok it works stuttery when i press up on the slide switch and i can hear the caller kinda stuttering
wierd software rpoblem i think
its not hardware problem as the slider makes it work,,if i constantly press up o the slider but then i hear the caller and the beep beep it makes to tell you its at full volume
My qtek s110 is doing the same thing after i dropped it, could i have knocked the contacts?
Can anyone explain why the volume slider would make it work.
Cheers
I think its a hardware prob only! Cz if the volume slider is getting the sound volume increased, you guys still couldnt get the full volume right? If so, its probably the speaker or its contacts getting the problem!
www.CartyStudios.com
solution for no noise problems
Hey guys and girls, I also had problems with “no noise from the earpiece only.. and were puzzled with the problem for few days….until found the reason behind it.
As I am a lover with high-tech devices, I really wanted to fix this problem by myself (not prepared to pay few hundred dollars for repair from technicians).
I also want to contribute something on this site, as I have read great information’s from this site.
Here it goes.
I had this "no noise issue" problem with one of my device (have 2 sets of o2 mini) had no sound on the earpiece only (meaning speakerphone, hands free mic all works perfectly).
Now, to make everything short, I have done a great research with few personal technicians and even official technician from O2 Company and found the answers for this problem.
The fault actually lies with what is called the "Audio Daughter Board". It is a removable internal PCB that the speaker contacts to receive its audio signal from the phone. The board has a connector that is soldered to it which sits on another connector that is soldered to the main board. Both of these connectors can become removed from their respective solder connections usually as a result of a fall or physical impact. Usually all that is needed is a touch up of the solder points.
This Audio “daughter board” is connected with black connector at right hand side only, and the rest of the board with double sticky tape.
Most likely, the black connector has been disconnected to the “daughter board during drop of the device, as you need to solder the parts back (black connector has 14 legs, 7 on the left and 7 on the right) to get your earpiece sound back to normal.
I have done it, so can you (very small legs, so has to have delicate hands).
Now, mine works like a charm…. So happy…
After all, it was neither the programs, nor the legs of the earpiece, but the actual connection between the boards itself.
Hope my information helped.
Cheers
PS: I have updated my device to 2003 second edition with radio 1.13.00 but have no idea where to get pda programs. Can anyone let me know where to find such good programs?
It works!!!! Thanks
Your a genius
Hi im so happy it worked. I bought even a new speaker but this was noit the problem.
The internal speaker is now working but i found another problem with the ring tone liudness which i have to clarify now. So the serach will start again for me.
Again thanks.
Hi need help from all of u.
Hi my o2 mini have this problem, i can't hear anthing from the caller but they can hear me.may i know how to get the problem done, hope all of u can help me thank You.
bluehanul76
You really rock m8.
I was very doubfull that this would work. I have tried everything else people has suggested to no avail.
BUT I thought I have nothing to lose in trying you suggestion.
And it worked. It really worked.
Thank you very much.
Sorry for what am i going to say, maybe i did not get things clear...
How on earth can you solder the black connector both on the main motherboard and on the audio daughter board? Am just asking cause my magician had a broken earpiece and when i open it to replace it the phone died. Strange thing is that when i remove the storage card it comes alive again but no sound from the earpiece. So this solution is great although i had to make the question just to know how to handle things.
Thanks guys
Got it guys, the one connector on the main board was detached completeley and got stuck into the other. That is why i thought that it was one piece.
Man , i said to myself how come these people got it soldered , they must all have personal nano robots lol
Update:
Burned the small black connector tha sits on the main rboard
Any chance for someone to know what sort of PCB is this so i can purchase one?
Firts of anything sorry for my inglish but i´m portuguese and my inglish is a litle rusty.
I known there are a lot of people whith this problem and i had to. I tried a lot of things and i find a solution. The major problem of the this is that the black conector don´t conect very well whith audio bord, and i do a trick, so i thake a litle peace of cotton roll in powertape (like one that is on back of keybord) and a put it as way that when e close it make pressure in de audio border conector(in left of earpiece) agaist de front cover.
I hope I can help
enduromen
i have the same problem, and i will try to do as instructed. if it succeed everyone have a drink on me
Hello.
I have the same problem ina Qtek s100 but , like I dont know very well how to do look for the hardware piece that you send me the picture file because i cannot download it from XDA, it dont appear. If you send me to [email protected] I will be gratefull.
Thank you
problem: i discovered that my qtek s200 doesn't ring so i missed many calls. then i did find out that the speaker only work sometimes. i don't wanted to send it back for repair because i need a phone. and i don't want to loose the warranty
for everyone who have the same problem and want to try repairing the qtek s200 speaker quick and easy without loosing warranty:
i removed the case in the back/top where the camera is behind. just open the clips and remove it. there you can see the speeker in the left fixed behind a plasticcover (don't remove it - you will loose warranty).
take something like a janky or cotton and put it on the speaker. look out that the speaker will not be damaged. with only a little bit cotton now my speaker works perfectly.
i find out that many pocketpc's and windows-mobile-phones have problems with the speaker-contacts. i hope this tip can helpsomeone in the future!
regards
Speaker Issue
Thanks for the feedback (a little search would have helped you to find the correct thread where this comment would have suited better instead opening a new thread). But I think the speaker issue is something that should give HTC some serious thinking. It's their fault of bad quality assurance, bad engineering and weak components. It should be their problem to fix the phone for you and not your own problem. If we all head out and fix the stuff that HTC has failed then where will this end ? We would accept all the crap they give us. This is in-acceptable.
Mine broke a second time after going for repair. I eneded up doing what you have done - with a bit of sponge.
you are right. the companys who are doing this small computers really can do some things better. but otherwhise: this little computers are to small and it is a wonder that they are working. and look at all this functions they have. think back in the time of 386 computers. the mobile phones today are very much faster and very much smaller and for this you have to accept some little problems like this contact problem of the speaker. and this 386 computers also didn't work right.
and remember, a 386 computer had problems just if you want to play a wav-file.
my tip just is for this people who don't want to spend to much time with waiting that they get their phones back from repair.
the problem is actual and it don't will help any of the people who have this problem if we talk about the producercompanys who should do the things better. they never will change this problems to save money in the production of the phones.
be careful with using a sponge. if it is to hard, the speakermembrane could get damaged. i done it this way: i tested out how much cotton is needed that the speaker is working right. if i take to much cotton, the speaker gets to quiet or if the pressure between plasticcover and the speaker is to high, the speaker sounds very nasty and can get damage.
regards
Hi Schildzilla!
Thank you very much! I've fixed a problem in 3 minutes =) And it was even a fun. I was searching in the web for the solution and found many people having similar problems. What I really like is that solution does not need any techical skils. I used only stylus and cotton.
Thank you once again!!! =))
Thank youuuu for this extremely helpful tip... My O2 XDA Neo was on vibrate mode for the past 2 months...I thought I would have to spend some cash on geting a new speaker .....But thanks to you guys I was able to fix the problem with a small piece of newspaper Now The speaker works like before ...Many thanks again
How to open the backtop cover
Could you please explain step by step (pictures could be beneficial) how to open backto cover of QTEK S200 I tried pushing the little clips in the middle after replacing the battery but I didn't want to force it.
Is there any trick?
schildzilla said:
problem: i discovered that my qtek s200 doesn't ring so i missed many calls. then i did find out that the speaker only work sometimes. i don't wanted to send it back for repair because i need a phone. and i don't want to loose the warranty
for everyone who have the same problem and want to try repairing the qtek s200 speaker quick and easy without loosing warranty:
i removed the case in the back/top where the camera is behind. just open the clips and remove it. there you can see the speeker in the left fixed behind a plasticcover (don't remove it - you will loose warranty).
take something like a janky or cotton and put it on the speaker. look out that the speaker will not be damaged. with only a little bit cotton now my speaker works perfectly.
i find out that many pocketpc's and windows-mobile-phones have problems with the speaker-contacts. i hope this tip can helpsomeone in the future!
regards
Click to expand...
Click to collapse
Hi Schildzilla, works great in less than 2 minutes, thank you
Thanks
thanks for adding this thread...i fixed the problem in no time!
Tks its help me. You save my money....
I used this method for awhile, but eventually doesn't work anymore.
Same here, I used the above method too, but after a while the problem came back !
Works like a charm! Thank you so much!
thanks man x 1000
this trick works, but after a while, your speaker will not be working. it happened to me. 1st u can just touch the membrane anywhere & there would be sound, then only when the top half is touched there is sound, then no sound at all when everywhere is touched...
waiting for my replacement speaker & hopefully it will last... my speaker lasted for about a year before this happened
Hi all,
I have been using the htc elf 3450 since last year. It's very nice smartphone. But now I just a little bit problem with my htc elf.
When somebody called me, I cannot heard the voice on my earphone. When I switched to the loudspeaker mode, It's work, I can hear the voice.
I don't know what is happen with my earphone? Would you mind to tell me if you have any solution for this problem?
actually I am confused, is my earphone is broken or not? i don't know how to check it?
Thank you for your help.
Since I new in here, please correct me if i'm wrongfor the post.
it is a known problem of elf. I had the same problem with my elf and had to order an earpiece through ebay from china. after buying the earpiece replacement is easy. you can do it yourself using the disassemblement guide on this forum at http://forum.xda-developers.com/showthread.php?t=407323
good luck
Good Evening,
My defy does not ring anymore and the speaker doesnt work either I know that is probably a speaker problem the big one, but I dont know the name and I cant find it on ebay to buy it, the only one that I found is the small one the earpiece.
can someone point me to an ebay seller or even the name of this big speaker?
Thx
heavy666 said:
Good Evening,
My defy does not ring anymore and the speaker doesnt work either I know that is probably a speaker problem the big one, but I dont know the name and I cant find it on ebay to buy it, the only one that I found is the small one the earpiece.
can someone point me to an ebay seller or even the name of this big speaker?
Thx
Click to expand...
Click to collapse
http://www.ebay.com/bhp/motorola-defy-speaker
the ringer buzzer, not the earpiece......
I got a note 7 with a problem in the earpiece speaker, at first i take it to repair-shop and they kind weld something, them the problem came back, i startin to suspect of the earpiece speaker, but them the tech guy told me that he thinks that this part is the problem, honestly i got doubts, can you help me? Also if you can tell me the name of that part above the phone it will a big help for me.
You never said what the actual problem is.
The earpiece was working? I have and issue sometimes work and sometimes not... Very rare
I am having same issue. Did you manage to fix?