I got a note 7 with a problem in the earpiece speaker, at first i take it to repair-shop and they kind weld something, them the problem came back, i startin to suspect of the earpiece speaker, but them the tech guy told me that he thinks that this part is the problem, honestly i got doubts, can you help me? Also if you can tell me the name of that part above the phone it will a big help for me.
You never said what the actual problem is.
The earpiece was working? I have and issue sometimes work and sometimes not... Very rare
I am having same issue. Did you manage to fix?
Related
ok this is a bit funny
handsfree earphone works,,,but the ear phone in the mda compact doesnt work
the normal sound speaker works,,just not the phone speaker
ok it works stuttery when i press up on the slide switch and i can hear the caller kinda stuttering
wierd software rpoblem i think
its not hardware problem as the slider makes it work,,if i constantly press up o the slider but then i hear the caller and the beep beep it makes to tell you its at full volume
My qtek s110 is doing the same thing after i dropped it, could i have knocked the contacts?
Can anyone explain why the volume slider would make it work.
Cheers
I think its a hardware prob only! Cz if the volume slider is getting the sound volume increased, you guys still couldnt get the full volume right? If so, its probably the speaker or its contacts getting the problem!
www.CartyStudios.com
solution for no noise problems
Hey guys and girls, I also had problems with “no noise from the earpiece only.. and were puzzled with the problem for few days….until found the reason behind it.
As I am a lover with high-tech devices, I really wanted to fix this problem by myself (not prepared to pay few hundred dollars for repair from technicians).
I also want to contribute something on this site, as I have read great information’s from this site.
Here it goes.
I had this "no noise issue" problem with one of my device (have 2 sets of o2 mini) had no sound on the earpiece only (meaning speakerphone, hands free mic all works perfectly).
Now, to make everything short, I have done a great research with few personal technicians and even official technician from O2 Company and found the answers for this problem.
The fault actually lies with what is called the "Audio Daughter Board". It is a removable internal PCB that the speaker contacts to receive its audio signal from the phone. The board has a connector that is soldered to it which sits on another connector that is soldered to the main board. Both of these connectors can become removed from their respective solder connections usually as a result of a fall or physical impact. Usually all that is needed is a touch up of the solder points.
This Audio “daughter board” is connected with black connector at right hand side only, and the rest of the board with double sticky tape.
Most likely, the black connector has been disconnected to the “daughter board during drop of the device, as you need to solder the parts back (black connector has 14 legs, 7 on the left and 7 on the right) to get your earpiece sound back to normal.
I have done it, so can you (very small legs, so has to have delicate hands).
Now, mine works like a charm…. So happy…
After all, it was neither the programs, nor the legs of the earpiece, but the actual connection between the boards itself.
Hope my information helped.
Cheers
PS: I have updated my device to 2003 second edition with radio 1.13.00 but have no idea where to get pda programs. Can anyone let me know where to find such good programs?
It works!!!! Thanks
Your a genius
Hi im so happy it worked. I bought even a new speaker but this was noit the problem.
The internal speaker is now working but i found another problem with the ring tone liudness which i have to clarify now. So the serach will start again for me.
Again thanks.
Hi need help from all of u.
Hi my o2 mini have this problem, i can't hear anthing from the caller but they can hear me.may i know how to get the problem done, hope all of u can help me thank You.
bluehanul76
You really rock m8.
I was very doubfull that this would work. I have tried everything else people has suggested to no avail.
BUT I thought I have nothing to lose in trying you suggestion.
And it worked. It really worked.
Thank you very much.
Sorry for what am i going to say, maybe i did not get things clear...
How on earth can you solder the black connector both on the main motherboard and on the audio daughter board? Am just asking cause my magician had a broken earpiece and when i open it to replace it the phone died. Strange thing is that when i remove the storage card it comes alive again but no sound from the earpiece. So this solution is great although i had to make the question just to know how to handle things.
Thanks guys
Got it guys, the one connector on the main board was detached completeley and got stuck into the other. That is why i thought that it was one piece.
Man , i said to myself how come these people got it soldered , they must all have personal nano robots lol
Update:
Burned the small black connector tha sits on the main rboard
Any chance for someone to know what sort of PCB is this so i can purchase one?
Firts of anything sorry for my inglish but i´m portuguese and my inglish is a litle rusty.
I known there are a lot of people whith this problem and i had to. I tried a lot of things and i find a solution. The major problem of the this is that the black conector don´t conect very well whith audio bord, and i do a trick, so i thake a litle peace of cotton roll in powertape (like one that is on back of keybord) and a put it as way that when e close it make pressure in de audio border conector(in left of earpiece) agaist de front cover.
I hope I can help
enduromen
i have the same problem, and i will try to do as instructed. if it succeed everyone have a drink on me
Hello.
I have the same problem ina Qtek s100 but , like I dont know very well how to do look for the hardware piece that you send me the picture file because i cannot download it from XDA, it dont appear. If you send me to [email protected] I will be gratefull.
Thank you
I need urgent help with this problem im having. I was using my JAMin when all of a sudden, it just went mute. I turned it off and on again but it didnt do any good. Everything else is working fine; it's just that there is no sound.
I've tried inserting and taking out the hands-free pin from the jack but still no luck. I even tried the hard reset; but still no success.
Kindly help me out!
Thankyou.
You get sound from the handsfree? if so, the speaker could be broken.
The thing is, the speaker just can't break on its own now can it? I mean it the set didn't fall or anything, so how can the speaker possibly break?
Oh and yeah, i do get sound from the handsfree; just not the speaker.
same problem with mine...turn out the speaker is broken, apparantly it is common problem with early version of 818pro (the service centre told me that)
Yep you got a bad one.
This seems to be a major problem with the HTC Prophet as a whole regardless of the branding. I have returned mine to Orange for a replacement, they confirmed that it was hardware failure. I thought that I might have just got unlucky with a bad batch, but looking across the NET and here, it appears that all brands based on the HTC Prophet are failing.
Obviously, shoddy manufacturing, I guess HTC did a little penny pinching with the speaker system.
Everyone i call or calls me hears me verry verry slow, i mean the volume of the microphone in my hyma is almost at minimum... is it normal or is my case particular and if so how can i remediate this problem??
Am i the only one experienceing this problem??? Please tell me coz i want to know and i will take it to a service and fix it.
I've the same problem on my Qtek9090, not solved. I guess it could be due to the position of the microphone on the device: did you check it? Mine is very hidden, on the bottom side.
Hi all, my gm 5 plus seems to have a pretty low in call volume. i need to be in a quiet place to be able to hear the person on the other end of the line. anyone else have this problem?
i have the same problem
eny ideas ?
I also have the same problem. The volume of the phone is very low., I almost don't hear the other person when calling. I need to put it to speaker to hear it decently. Any possible solution for this issue?
I'm ok with the volume, it's just that sometimes my voice gets interrupted at all, and the other person seems not to hear me. Haven't been able to find a way to fix it yet.
mjz2cool said:
Hi all, my gm 5 plus seems to have a pretty low in call volume. i need to be in a quiet place to be able to hear the person on the other end of the line. anyone else have this problem?
Click to expand...
Click to collapse
i had same problem after 7-8 months from buying. i went to the guarantee service and they made it without any fee. they said it was because of dust but i don't believe them. just go to the service, they will fix it.
bluellay said:
i had same problem after 7-8 months from buying. i went to the guarantee service and they made it without any fee. they said it was because of dust but i don't believe them. just go to the service, they will fix it.
Click to expand...
Click to collapse
i had mine send in for repair, because it fell, causing some dents in the metal frame. they replaced it for free, it was louder, but still too low. my huawei p9 lite and now my iphone are so loud i can almost use the earpiece as the speaker.
Speaker was dirty inside in my gm5plus, telpa service cleaned it up, now I can hear when call someone. (Or you can use a needle, but BE CAREFUL)
Hi guys,
My phone got into water recently, but luckily after going to local repair guy it works.
Only issue is, my secondary mic hardware is gone. So when I am on call and turn on loudspeaker, Other person can't hear a thing.
I tried to do some changes in build.prop so that always my primary mic is used but was unsuccessful.
Anybody knows how this can be achieved ?
Or if someone can give me reliable link of mic part online that will also help.
Thanks