I wanna to backup my current official ROM before I upgrade it to WM6.
I'm using MTTY VER1.11a，I don't know the command for dumpping ROM to microSD card. when I using "r2sd all", MTTY says:"Invalid command : r2sd all", do anyone know how to dump the ROM from artemis? thanks a lot.
original rom for your arte device is digitally signed when you flash it into device. since it is installed on device, there is no signature of course.
if you dump your rom, you will get unsigned rom, which normally will not flash (without uspl) .
there is more simple way of doing what you want - you need to have original rom for your device handy, before flashing. search forum and you will find rom for your device
regards,
Related
I installed the XDA developers ROM flawless, but the GRPS browsing deosn't work, and I need it. I want to go back to the original ROM, or other original QTEK ROM, but when I run the installer it stops after "waiting 10 seconds.." I tried 2 different ROMS I've found inthe forum, the UK [email protected] 3.17... and the 3.16...
How can I go back? Is it possible? Please developers help me
Thanks
yes, it's no problem to flash (downgrade?) it to O2 3.xx,
I am not very sure what happened in ur XDA, but I suggest try to use Image Tool to burn the O2 rom.
what's the image tool?
Is it different from the installer I tried?
OK, here is the reason:
B coz the rom which from xda-developers is base on qtek rom, so the id of ur XDA has been changed to qtek's id, once u want to install the rom from O2, the upgrade program found a different id and refuse to upgrade it.
u can:
use Image tool to write the ROM from O2
or
run adaptRom.exe in ur pc to update the ROM from O2, and then u can 'install' it from ur pc to XDA
how exactly I use the ADAPTROM?
I run it from the pc and nothing happenned. (A dos window opened and closed immediately) In which directory should I run it? Or is it from the mobile device through the pc? Please explain me.
The other thing is that I didn't understand correctly the process with the ROM image tool. I copied the ROM from the QTEK to the SD, and then I wrote in the SD the upgrade. Now the pc doesn't recognize de SD, I can't even format it and I'm too afraid to put it back in the XDA.
ANy ideas what should I do? I even tried Isobuster but it didn't read it.
Esteban
Copy adaptROM.exe to same direcory as installer (under "Program Files", called "RUU", "Programme A" or somthing similar.
Go to this directory using the command prompt, and then run adaptROM in that directory.
Run "Programme A", it will not complain anymore...
We're working to make this easier...
i am facing the same problem
hello dear xda-develpoers .... i have the same problem but i have the qtek and i flashed it with the new o2 rom with the xda-developers 1.1 but i cant go back to my orgeinal qtek rom ..i have triyed copying the adaptROM.exe to same direcory as installer (under "Program Files", called "RUU" then i have tryied to flash the rom but nothing changes can u please help me....thanks very much
I hope you also ran adaptROM, and not just copied it. First run adaptROM, then "Programma A"...
Hi there
Just curious to know if there is any way I can downgrade my Typhoon (an Orange SPV C500) following the WM6 upgrade I did. I would take it back to the software version obtained from http://www.orange.co.uk/c500patch/. When I try just running it, I get an error about communications which I guess is due to the bootloader I installed before upgrading to WM6.
Cheers
Dom
1)
Download http://rapidshare.com/files/54448481/SPL-1.01.0064.zip
While you're in WM6 do the following:
Run TyphoonNBFTools.exe Goto
Tools Menu
----------
* Immediate Flashing Popup Menu is enabled
- Test Immediate Flash : test the reliability of the flasher. This is done automatically when
flashing a critical section.
Right click on SPL / Emergency flash is enabled : flash the bootloader of the device with this one - VERY DANGEROUS
Thanks to arisme for the tutorial
2)
Run the MTTY
* type: info 2
* type: format BINFS
3)
Close the MTTY, and run wm2003 rom.
Good Luck
The steps for REVERT to WM2003SE from WM6 (or WM5 as well)
are explained here:
http://forum.xda-developers.com/showthread.php?t=279464
...initially I have big problem to find this steps (In particular SPL 1010064).
Follows the steps of the link:
for me NO PROBLEM TO REVERT FROM WM6 ANDOT IMAGE to WM2003SE I-MATE IMAGE.
Thanks for you help guys, but unfortunately I have a problem! Have explained in the original downgrade thread here.
i have some questions can i downgrade to the wm 2003 Rom that i hadit before ?
Profy_X said:
i have some questions can i downgrade to the wm 2003 Rom that i hadit before ?
Click to expand...
Click to collapse
yes U can.....If U r downgrading from ANDOT's WM6 to WM2003,
Follow these steps:
1. Run SPV Services and check whether U have super CID or not...(it must be Super CID i-e CID unlocked......
2. run Typhoonnbftools and emergency flash the phoen with provided SPL 1.01.0064 nbf file.... Once flashing is done... turn off ur phone, and disconnect it from USB
3. kill wcescomm and rapimgr via Win XP task manager
4. Run Mtty142.exe and click the USB button...A command prompt like windows will pop up
5. Type info2
6. Typeformat BINFS (in capitals is BINFS, case sensitive)
7. dont turn off or reset Ur device now.....just close Mtty and run the official upgrade (i used orange's from the site given above)
U R DONE
I have an HTC Innovation, Qtek 9100...also wizard i think, Os: 1.1.7.8
GSM 1.4.10, SPL 1.01, Ipl 1.01, The language is in french.
I want at least to change the language to english, but i want it also a little updated.
I don't know what g3, g4 means and how to find out what version i have.
Please tell me where to begin to upgrade the phone, here are to many post and are some terms i don't understand like g3, g4, ipl, spl.
I don't think the phone is locked.
I also have vista
Thankyou and please guide me a little.
Start Here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
You have a G3 device
Here is a link to flash an english rom to your device
ftp://xda:[email protected]_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe
it is not an upgrade basically the same as you have now but in english
here is a link to all the files you need to unlock the wizard both sim unlock(any sim card can be used) and cid unlock( You can install any rom)
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
password for rar file is scousemartin
Once you have all this installed, you can flash any wm5/6 rom available for the wizard
thankyou, u've cleared things up for me ...
just how u know that is ia g3 or g4, g i think g stands for generation right??.....
found the info from the links...thanks again..
lanst question, after u what is the best wm5/6 to install onto the wizard? what rom posted here? i see here some tnt rom, are they good?
I use tnt 1933 from here and have no problems with it ,i would use radio 2.19 as well,as people have issues with missed calls etc, a link for that is there too
I know you have a g3 as your ipl and spl are 1.01 if it was a g4 it would be 1.01.xx
http://forum.xda-developers.com/showthread.php?t=341550
download links are located in post 3
you know what is not working? the link to the original wwe rom, from the ftp, looks like it is not there anymore!? can u verify that? or is my computer the problem?
yes i have just checked it isnt available anymore, in fact none of them are there anymore. download my wizard unlock pack and unlock the wizard with lokiwiz2b how to is here http://forum.xda-developers.com/showthread.php?t=249474
hope this is my last question!
What i have missed or what am i doing wrong?
so, i installed the rom from your unlock archive and it is ok, my wizard is in english now
i tried my simcard and it works so that results that my phone is not sim locked so i didn't use any of the sim unlock tools.
now i try to flash the tnt rom and gives me : error 295 and says something like imposible to use on your device and says to use some newer nfb file
...and what is the extended rom?
now i am reading: You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
so this means i can't install this rom if i have ipl spl 1.01?
reading a tutorial while updating this post!, so i red that i have to install a tmobile rom before i can install any rom? is this true?
Which rom did you install the button rom? or the o2 rom?
if it was the button rom did you follow these instructions
1 - Unzip lokiwiz.zip to a folder on your desktop
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
press the windows key + r and type cmd and press enter to get a dos window,that way when lokiwiz finishes you will still be able to read what it says
5 - Click on the black dos window that has opened and type cd desktop then type dir /ad and then a list of all the directorys on your desktop will be shown then change directory to the lokiwiz2b directory and Execute lokiwiz.bat (on your computer!)
Extended rom is what it says, a part of rom that is in an extended partition, basically it contains customisation programs and important files for installing into the wizard when it is hard reset.
when you say you tried your simcard ,was it the same provider e.g. o2 that you were using before? If it is the same that wont make a difference, try a sim from a provider that you dont have like t-mobile.
Anyway simunlock just allows you to use any sim, cid unlock allows you to load any ROM which is what you want to do.
My friend bought long time ago; on ebay. Appears sim-locked.
Now i'm trying to help him in unlocking, i have read lot of treads, and tryed several programs, but still no luck.
Can you guys please help me and advise how to ulock the phone.
Configuration is:
T-Mobile pw10b1
MS Pocket PC v.3.0.12039 (buid 11178)
ROM 3.08.10 ENG (07/11/02)
Radio 6.02
Protocol 324e4
Bootloader 5.15
Network adapters:
AsyncMac1 NDISWAN Adapter
NE2000 Compatible Ethernet driver
PPTP1 NDISWAN Adapter
What I did:
using this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
-Installed ActiveSync from MS site;
-Backup the ROM to SD and to PC using XDATools;
-Tryed to flash bootloader with 'pnewbootloader bootloader_v5_15.nb0' but it returns an error 'Unable to find flash info offset, cannot disable bootloader writeprotect'
?? May be it's because i'm already on 5.15 bootloader?
-then i tried to Install the 'XDA-Developers Special Edition ROM 1.2' but error said that BIOS is for pw10A1, not mine.
?? where can i get Special ROM for pw10b1?
-then i'm tried to go to http://www.romkitchen.de/, but didn't use the ROM because not sure if works (phone is not mine). Which ROM to use, will WM2003 SE work on mine phone? Will it remove SIMlock?
- i'm reading about the XDAunlock program, on web said: Please note that XDAunlock will only work on device with a PPC2002 ROM that has the Wireless Modem feature. Do I have PPC2002? Do I have Wireless Modem?
Thank you in advance for help!
ps is it possible to get unlock-code some where? Upgrading ROM can be too risky (phone is not mine...)
First of all, since you have already backuped the ROM of the devie would you be able to send me the File?
Cocnerning XDA Special ROM. Normally faslhing that should work either for PW10A and for PW10B devices. There is a tool called adaptrom (http://wiki.xda-developers.com/index.php?pagename=adaptROM) that can be used for flashing.
But I´m not quite sure if this ROM will work for unlocking the device. The Radio Stack of the device is also quite old. But you can give it a try. Securest way for flashing is via SD-Card.
Done this hundred of times already.....
Stefan
HI!
Just tryed to install new ROM via SD-card from romkitchen, and it works!
Everething but SIMUnlock
(3.17 and XDAunlock were included...
Please advsise how can i remove it?
Also, when i boot from SD it said - CE, not CTE+Boot - is it ok?
Will WM2003SE work on my XDA?
as for flash file, i'm going to put it on the rapidshare, so i don't need to brake it apart...
can i burn NK.nbf onto SD? I have it from XDA-developers Special Edition ROM?
Thanks again
http://www.romkitchen.de/ roms also 2003SE
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD guide how to get .nbf to the sdcard
Rudegar said:
http://www.romkitchen.de/ roms also 2003SE
Click to expand...
Click to collapse
Thanks! but i wonder if 2003se can be installed onto my box...
Rudegar said:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD guide how to get .nbf to the sdcard
Click to expand...
Click to collapse
yap, this page i'm using.... Can you please advise me - what is difference between .nbf and .nb1 ROM's.
any ideas how to remove simlock on my xda?
appreciate your help!
http://wiki.xda-developers.com/index.php?pagename=WallabyFileFormats/nb1
vs.
http://wiki.xda-developers.com/index.php?pagename=WallabyFileFormats/nbf
try reading this about unlock
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
I put my ROM:
http://rapidshare.de/files/38022282/rombackup2.nbf.html
Also, I put XDA-developers Special Edition ROM - just copied NK.nbf file onto SD-card using XDA tools.
But XDAunlock didn't run on xda boot... but i found this file in \Windows\ directory and run manually - and it's WORKS!
THANKS A LOT FOR YOUR HELP!!!
After that I upgraded Radio to 6.24.00 (no sure I this would remove sim-lock, didn't test; hope this version is stable/better that my previous 6.02)
Now i need to find a way to install dual-lauout (Russian) and to install some good Media Player (with avi, mp3, mov, wma and 3gp) - can you give me any advices?
Thanks again for all your activities and for your site!
ps forgot to ask - my devise became pw10A1, not pw10B1, is there are any risks with that?
http://www.pocketpcfreewares.com/en/index.php?soft=813
== best audio player imho
http://tcpmp.corecodec.org/ best video player which also play audio
is really useful for me, I am glad to read it here.
asvaran said:
My friend bought long time ago; on ebay. Appears sim-locked.
Now i'm trying to help him in unlocking, i have read lot of treads, and tryed several programs, but still no luck.
Can you guys please help me and advise how to ulock the phone.
Configuration is:
T-Mobile pw10b1
MS Pocket PC v.3.0.12039 (buid 11178)
ROM 3.08.10 ENG (07/11/02)
Radio 6.02
Protocol 324e4
Bootloader 5.15
Network adapters:
AsyncMac1 NDISWAN Adapter
NE2000 Compatible Ethernet driver
PPTP1 NDISWAN Adapter
What I did:
using this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
-Installed ActiveSync from MS site;
-Backup the ROM to SD and to PC using XDATools;
-Tryed to flash bootloader with 'pnewbootloader bootloader_v5_15.nb0' but it returns an error 'Unable to find flash info offset, cannot disable bootloader writeprotect'
?? May be it's because i'm already on 5.15 bootloader?
-then i tried to Install the 'XDA-Developers Special Edition ROM 1.2' but error said that BIOS is for pw10A1, not mine.
?? where can i get Special ROM for pw10b1?
-then i'm tried to go to http://www.romkitchen.de/, but didn't use the ROM because not sure if works (phone is not mine). Which ROM to use, will WM2003 SE work on mine phone? Will it remove SIMlock?
- i'm reading about the XDAunlock program, on web said: Please note that XDAunlock will only work on device with a PPC2002 ROM that has the Wireless Modem feature. Do I have PPC2002? Do I have Wireless Modem?
Thank you in advance for help!
ps is it possible to get unlock-code some where? Upgrading ROM can be too risky (phone is not mine...)
Click to expand...
Click to collapse
u no need special rom for 10b1. just try to run adaptrom before start program A. it will work
Hello,
i tried to flash my blueangel to Windows Mobile 6 Build 20758, following the instructions in the wiki.
Now i have a problem with flashing the device. I downloaded the rom from the wiki-page (Version 3.02 without ramdisk) and extracted it to the directory where MaUpgradeUt_noID.exe (version 1.32) is. MDA III is cradled and in Boot Loader Mode (USB displayed). But the device couldnt be recognized ( screenshot and i cant do the upgrade.
i carefully followed the instructions from the wiki.
What i am doing wrong ?
Maybe your rom not's good ?
just click the next button... and see what happens next..
cheers
evo
as long i upgrade or reflash any type of BA ROM (wm5,wm6,wm6.1) it did not show my current device version, usually when you through this option there is nothing wrong just klick upgrade and your device will flash.
So far i know, u dunt have required HTC RUU files. The 20758 package has only nk.nbf file and no RUU
go to buzzdev downloads on buzzdev.net(u need a username for that) download the wm2005 upgrade from there. Extract it. then replace the nk.nbf with the wm6.1.20758 one. just run BAUpgradeUT.exe and u will go fine
remember to put your phone to bootloader mode by press [record]+[on/off] then reset.
if the error says: connection error. Take out the Mem Card and I recommend you should take out the sim card too. Also ensure that your battery is charged more than 50%
Edit: BLUE ANGEL MODS! Please upload the cracked BA RUU on the wiki or stiky it at the forum. coz usually roms posted here dont come with the RUU