Database Users

Charmer no signal :( any info or help

Hi to all in this forum.
I have one T-Mobile MDA Compact II PM200. In this forum i hound that his name is Charmer. I try to unlock it with Lokiwiz03a. Program give me a code but device says that code is wrong. I try with other software to unlock it and after that mobile work with SIM card but no signal
I reflash mobiele with WM6 founded her in the forum, not it have English (before have German) but again no signal. I try now to unlock it with Lokiwiz02a and choose CID unlock. Again no signal.
When device in Automatic search mode no found network. If in Manual mode found but unable to register in network. When i put mobile to my computer speakers no outgoing signal from mobile that's not normal.
What is the problem ?
Can onyone help me with information ot needed software ?
In moment mobile information is:
ROM version: 10.2.0.8 WWE
ROM date: 2/03/07
Radio version: 01.12.20
Protocol version: 4.0.13.23
Identity:
Model No.: WIZA200
Platform: PocketPC
IMEI: 35703700051525500
Hardware:
CPU: OMAP850
Speed: 195 MHz
...
I try to found information about this problem here in forum but w/o result.
10x in advance

Did you try to flash a new radio? 2.69 or 2.19?

No.
I found this files:
BREEIMG.zip
breeze.zip
inside breeze.zip are:
SSPL.exe
spl
breezessplv1.nb
inside BREEIMG.zip is:
BREEIMG.nbh
is this needed files for radio flashing ?
if not then what files I need to try with other radio version ?

I download Radio from ftp on this form for Prophet. And try with Prophet_G4_RadioRom_v2.47.11 but now mobile not start. Go to splash screen and after few seconds restart.
I try to put it in bootloader mode but ActiveSync can't make connection and for that flash software can't wreit new radio or flash into mobile.
I ry with:
1. dowenload this t-mobile official rom (http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe)
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
but ActiveSync can't make conection.
?

If you are in bootloader Active Sync wont make a connection. Just plug in the usb cable into your phone while in bootloader and run RUU.
Cheers,
vlodeck.

I try with this 2:
1. T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
2. Prophet_G4_RadioRom_v2.69.21
T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
===================================
inside are this files:
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Prophet_G4_RadioRom_v2.69.21
========================
inside are this files:
EnterBootLoader.exe
nk.nbf
ROMUpdateUtility_G4.exe
RUUGetInfo.exe
RUUResource.dll
phone not start normaly. just start and after 5sec restart. i put it in Bootloader mode (press Camera, Power_buton and Reset. then release Reset and after few sec. mobile goto in Bootloader mode). when conect USB cable ActiveSync not find mobile and this file not make upadte/conection: ROMUpdateUtility.exe and ROMUpdateUtility_G4.exe
if I try to start RUUGetInfo.exe windows says that this is not valid Win32 application.
then what RUU to start ?
how to flash other Radio into this mobile or to reflash it again to be alive ?

anyone will help me for my problem ?
in moment when i start my pocetpc it displays:
IPL 1.12
SPL 1.12.0000
OS 10.2.0.8
the row GSM .... missing.
in moment i can't make connection with ActiveSync. then how to flash again mobile ?
now i try to flash it with RUU:
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
http://www.t-mobile.de/downloads/?r...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip
but it gives a error

i try with this:
http://www.my-audio.net/xda/Univers...s/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
but when software start flashing says that this Utility is not for my device and to find right
?????

I'm guessing that this universal radio upgrade is for universal
Download this:
http://www.mobione.pl/pliki/ruu_252_eng.zip
Extract it, copy the .nbf of the rom you want to upgrade your device with to the extracted RUU folder. Once copied - run RUU.
P.S. The problem with your device is that you have upgraded wm6 on 1.xx bootloader. Thats why the system doesnt start. If the method I described above doesnt work. Post me.
Cheers,
vlodeck.

now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
i got this "invalid command 326": please check your NBF data, this NBF data cannot be used for your PDA Phone.

hi again to all
after long time i try to play agian with this brick-PM200 that haven't signal.
last time (before more 2 years) i write ROM and after that PM200 not start, only in Bootloader mode (3 color lines).
today i revive it when flash this:
HTC_charmer_upgradeut_noid.rar
(
EnterBootloader.exe
nk.nbf
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
)
PM200 start, in begin fave full signal. after 30-40 seconds signal gone (but not test in/out call). i try to restart mobile, try hardreset, try manual search on operator - all no result.
on start i put near radio but power amplifier not work. i think that this is harware problem.
but not 100% sure.
is possible this problem to be from wrong radio settings ?
i try to write different radios for Prophet but every time get message "Invalid tool" and radio flashers stop.
i try with universal radio thata Vlodeck says but again this message.
what to do ?
before two days i repair one HTC Touch Elf100 and read that can sniff USB comunication to check Vendor ID and other ID.
but in my PM200 this not work. on Elf100 work easy like is writed here in forum.
when start wyty (or what's name is) make connections with mobile but after write:
ruurun 0
says that need password. if try with password for Elf100 not accept it.
what is the password for Charmer (PM200) ?
or if there is other way to get Vendor ID and other ID how ?

I can help you maybe. You need to downgrade to Aku 2.2 using the original utulity. Then the Radio will be downgraded too. But nobody knows the exact way on how to do that. (Maybe Vlodeck knows that?) I'll try to get it this week and tell you then.
As for the password try CHARMER. I have never been able to test it with MTTY cause I don't get in the right mode but I think the olny possibility is CHARMER. Just try it with whatever tool you want.
Hope that was helpfull

10x for answer.
next day will test password and post result.
how to downgread to aku2.2 ?
if you find solution please post it.

today i try but w/o success:
Cmd>password charmer
Cmd>ruurun 0
Cmd>getdevinfo
Invalid command : getdevinfo
For a help screen, use command ? or h
Cmd>
i try and with passwrod CHARMER. result is same.
what are commands for MTTY that supported Charmer ?

OK you have the same problem I have. You have Cmd> in the window. To get the comands and the password working you need USB> instead of Cmd>. That is the same problem I have and I don't know how to fix it.

in moment i use MTTY 1.42
before 3-4 days i repayr one HTC Touch Elf100. and this MTTY work find. no problem that write CMD not USB.
terminal show CMD> i write commands and mobile answer w/o problem.
but in my Charmer not answer.
possible reason is access password. but not sure.

There are simple comands. And for them you don't need SuperCID. I tried them and they haven't worked too. So I think there is something else with it. Maybe the Bootloader locks all comands and you need a password for that too. But I don't know about that.

@ChrBeck
you try to make SuperCID SD card to have full access to mobile. and after that to try flash it with RUU ?
next morning will try this.
p.s. now find this:
http://www.tm-phonedownloads.com/
http://t-mobile.iris-global.com

Well, we can't SuperCID and Security unlock a Charmer with a bootloader over 1.x at the moment. This is surely impossible. That won't work using a SD Card too. So I think you will not have any luck.

Where to start?

I have an HTC Innovation, Qtek 9100...also wizard i think, Os: 1.1.7.8
GSM 1.4.10, SPL 1.01, Ipl 1.01, The language is in french.
I want at least to change the language to english, but i want it also a little updated.
I don't know what g3, g4 means and how to find out what version i have.
Please tell me where to begin to upgrade the phone, here are to many post and are some terms i don't understand like g3, g4, ipl, spl.
I don't think the phone is locked.
I also have vista
Thankyou and please guide me a little.

Start Here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
You have a G3 device
Here is a link to flash an english rom to your device
ftp://xda:[email protected]_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe
it is not an upgrade basically the same as you have now but in english
here is a link to all the files you need to unlock the wizard both sim unlock(any sim card can be used) and cid unlock( You can install any rom)
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
password for rar file is scousemartin
Once you have all this installed, you can flash any wm5/6 rom available for the wizard

thankyou, u've cleared things up for me ...
just how u know that is ia g3 or g4, g i think g stands for generation right??.....
found the info from the links...thanks again..
lanst question, after u what is the best wm5/6 to install onto the wizard? what rom posted here? i see here some tnt rom, are they good?

I use tnt 1933 from here and have no problems with it ,i would use radio 2.19 as well,as people have issues with missed calls etc, a link for that is there too
I know you have a g3 as your ipl and spl are 1.01 if it was a g4 it would be 1.01.xx
http://forum.xda-developers.com/showthread.php?t=341550
download links are located in post 3

you know what is not working? the link to the original wwe rom, from the ftp, looks like it is not there anymore!? can u verify that? or is my computer the problem?

yes i have just checked it isnt available anymore, in fact none of them are there anymore. download my wizard unlock pack and unlock the wizard with lokiwiz2b how to is here http://forum.xda-developers.com/showthread.php?t=249474

hope this is my last question!
What i have missed or what am i doing wrong?
so, i installed the rom from your unlock archive and it is ok, my wizard is in english now
i tried my simcard and it works so that results that my phone is not sim locked so i didn't use any of the sim unlock tools.
now i try to flash the tnt rom and gives me : error 295 and says something like imposible to use on your device and says to use some newer nfb file
...and what is the extended rom?
now i am reading: You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
so this means i can't install this rom if i have ipl spl 1.01?
reading a tutorial while updating this post!, so i red that i have to install a tmobile rom before i can install any rom? is this true?

Which rom did you install the button rom? or the o2 rom?
if it was the button rom did you follow these instructions
1 - Unzip lokiwiz.zip to a folder on your desktop
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
press the windows key + r and type cmd and press enter to get a dos window,that way when lokiwiz finishes you will still be able to read what it says
5 - Click on the black dos window that has opened and type cd desktop then type dir /ad and then a list of all the directorys on your desktop will be shown then change directory to the lokiwiz2b directory and Execute lokiwiz.bat (on your computer!)
Extended rom is what it says, a part of rom that is in an extended partition, basically it contains customisation programs and important files for installing into the wizard when it is hard reset.
when you say you tried your simcard ,was it the same provider e.g. o2 that you were using before? If it is the same that wont make a difference, try a sim from a provider that you dont have like t-mobile.
Anyway simunlock just allows you to use any sim, cid unlock allows you to load any ROM which is what you want to do.

[ROM] Windows Mobile 6.1 for HTC ELF/ELFin

VERY IMPORTANT TO NOTE:
This custom ROM is built for installation onto both the ELFs and ELFins.
DO NOT FLASH IT TO ANY OTHER DEVICES! I will not be responsible for any damage to your device.
FOR FIRST TIME CUSTOM ROM UPGRADERS:
1. Copy the Cert_SPCS.CAB and EnableRapi.CAB from the zip folder to your device's Storage Card.
2. Install the two cabs to your Device memory and do a soft reset.
3. Restart your PC or laptop (Optional)
USING THE INTEGRATED ROM UPDATE UTILITY WITH USPL CID UNLOCKER:
(ATTENTION: REMOVE YOUR 4GB, 6GB or 8GB mircoSDHC CARD WHEN FLASHING THIS ROM!)
1. Turn off your computer's Anti-Virus software if you can.
2. Activesync your device to your PC using USB port.
3. When the connection is completed (after synchronisation), double-click on [START] batch file to begin the integrated ROM Updating Utility.
4. Now follow closely the instructions that appear on the computer screen.
5. Press [ENTER] to accept at each prompt to continue the process.
6. After Step 2/3 of USPL CID Unlocker, the device screen will turns "blank white" and your activesync icon gray (in Windows XP only).
Congratulations! You have successfully CID unlocked your device. Press [ENTER] to proceed NOW!
(NB: If you failed to see the "blank white" screen, then your CID unlocking has failed.
Restart your installation process from Step No.1)
7. Your device will now proceed to update your rom. Select and hit [NEXT] at each prompt to continue.
8. When the rom updating is completed at 100%, your device will restart automatically.
9. Congratz! You have successfully upgraded to a new rom.
Enjoy!
__________________________________________________________________________________________________
I did this had no problems with my htc elf/elfin/touch over the moon with it!!!
REMEMBER: all of your installed applications will be swiped of with this ROM.
Also have fun with your upgraded windows mobile 6.1 HTC ELF!!!
__________________________________________________________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
__________________________________________________________________________________________________
please tell me if there is any problems post a reply...
forgot to menchion download the full thing at > http://thepiratebay.org/torrent/4277382/Windows_Mobile_6.1__en_for_HTC_Touch
DO NOT BE A NOOB FOLOW THE ON SCREEN INSTRUCTIONS!!!!!!!!!!
__________________________________________________________________________________________________

'Start' batch file does nothing.
Tried opening it directly from a command prompt, but still nothing, except it opens another dos box.
Thoughts ?

The 'start' batch file fails because the first command is 'cd RUU'. but there is not a folder called RUU.
Then it tries to rename two files which also do not exist. Hence it never actually arrives at the exe file to unlock & install the ROM.
Can this work if you simply run the exe file without renaming & changing folders ?

Hi, and thanks for that script...
The .bat works well for me but while updating the rom, I've got an 270 error... 'The images files is corrupted please check your update utility'
does any one had the same issue on his phone? Do you think I just need to download it again? (concidering that the zip file uncompressed normaly, I assume it works well...)
Thanks for your answers...

upgrading MDA Touch
please i need your Help.
I have download the" touch essential V3.5 Manilla" on my PC. But i don´t know how to send it to my MDA.
Activsyc is working.
Where kann i fine the cert_CAB?
I have also unpacked the V3.5 manilla, but there is no way to run it in the MDA how should i do this.
many thanks

My 2 cents...
If I were you I wouldn't rely on a torrent posted by a junior member (age 12) and rather download the ROM posted by Football on Rapidshare => See his post HERE <=.
I've been using it from day 1 without any problem...

gruikdadude...
gruikdadude... I understand were you are coming from but I have been very carefull on what i look for and actually this torrent file was uploaded by someone on xda developers so i am saying the update worked fine for me so why shouldnt it for you so before you start criticising a me for posting something that is just to assure htc touch owners that there is a reliable WM6.1 upgrade is there anything wrong with this......... NO!!! so before you criticise think twice !!!bell end!!!
__________________________________________________ ________________________________________________
Whiplash1995.
Cheers
WM6.1
for
ELF
________________________________________________ __________________________________________________

r there any direct download links?
as i prefer not to download through torrents...torrents downloading over here sux...

whiplash1995 said:
so before you criticise think twice !!!bell end!!!
Click to expand...
Click to collapse
Not criticizing you at all: just warning xda members that downloading any posted ROM can be harmful for their PPC...
EOF

Can you plz. give us link for zip file instead of the ttornet one
thanks in advance

can you tell me the diffrences between this rom and the original 6,1 rom? i see no manilla2d, but more differences?

hi i tried the whole procedure , but i get the ERROR[270]: Image file is currupted, can anyone help regarding this error, how to get the uncurrupted version?

Since this rom is giving a lot of people problems, why not just use one of the verified good roms from the Elf Upgrading subforum?

ma_upgrade doesnt work

Hello,
i tried to flash my blueangel to Windows Mobile 6 Build 20758, following the instructions in the wiki.
Now i have a problem with flashing the device. I downloaded the rom from the wiki-page (Version 3.02 without ramdisk) and extracted it to the directory where MaUpgradeUt_noID.exe (version 1.32) is. MDA III is cradled and in Boot Loader Mode (USB displayed). But the device couldnt be recognized ( screenshot and i cant do the upgrade.
i carefully followed the instructions from the wiki.
What i am doing wrong ?

Maybe your rom not's good ?

just click the next button... and see what happens next..
cheers
evo

as long i upgrade or reflash any type of BA ROM (wm5,wm6,wm6.1) it did not show my current device version, usually when you through this option there is nothing wrong just klick upgrade and your device will flash.

So far i know, u dunt have required HTC RUU files. The 20758 package has only nk.nbf file and no RUU
go to buzzdev downloads on buzzdev.net(u need a username for that) download the wm2005 upgrade from there. Extract it. then replace the nk.nbf with the wm6.1.20758 one. just run BAUpgradeUT.exe and u will go fine
remember to put your phone to bootloader mode by press [record]+[on/off] then reset.
if the error says: connection error. Take out the Mem Card and I recommend you should take out the sim card too. Also ensure that your battery is charged more than 50%
Edit: BLUE ANGEL MODS! Please upload the cracked BA RUU on the wiki or stiky it at the forum. coz usually roms posted here dont come with the RUU

[Q] Stuck Upgrading

hi i am trying to upgrade my Typhoon to 6.1 but i haver got to the point in the upgrading process in which i need to restart and press 0 for the IU the only issue is i do not recive this message and i cannot get any further.
Edit: my SPL is 2.05.0130

you must go to the patched SPL 1.09 for Typhoon befor you go any further.

yes it is true said tobbie, with 1.09 SPL you can flash any rom like WM6.1 or WM6.5 on your Typhoon
for SPL 1:09 Can you get HERE

oh well ive tried poatching the spl before but i just recive errorr 260 or 240 and i cannont make no progress i have tried using a different computer but to no avail

oh well... if the device is still original, then you must follow a sequence of actions to allow such upgrade.
These should be mentioned in any custom rom thread. Essentially you must get the SPL 1.09 on the device then you can load any custom ROM.
1. application unlock the old OS
2. CID unlock the device with lokiwiz toolset
3. load SPL 1.09
4. load custom ROM
good luck!

I belive i have already application unlocked and supercided it with lokiwiz toolset but i have peforemd a hard reset due to that connection issue, would that haver affected it in anyway? thanks

If you are back the old WM2k3 and you cannot upgrade the SPL, then lokiwiz probably has not super-CID your device. To check, connect your device in Bootloader mode to mtty (with AS having USB disabled) and enter "info 1" (no quotes) then try "info 2" (no quotes) and report both results.
Not sure about above myself as I have no device at hand today to check right now.
Hard reset does not affect the CID or SIM Unlock - these are stored in the encrpyted area of the ROM (64kb Block) that is not affected by Hard-Rest or OS-flashing.

sorry for my noobiness but it will not show in mtty i have tried the usb drivers? but the phone does not show in mtty

You must make sure that Active Sync (Windows XP) or Mobile Device Center is not using the USB port to connect the device. You can disable the use in Active Sync selecting the "Connections" menu and then disabling there.
Reconnect the device and restart mtty. The USB button will be there only if the USB connection is accessible and the device is connected to the USB port.

sorry for the bump but ive came back to my phone and i am having so my trouble superCIDin the phone i have done everything by the book, ive hard reset the phone and tried everything again and now SDA unclokder says "phone is not unlockable" and the lokiwiz.bat will not super cid it.

Look at mediafire in my kitchen folder here:
http://www.mediafire.com/?3tt15dyp4mbuu
the "...one time per device" ZIP has all tools inside. There is another (on board application unlock) that will do the trick. It installs a tool on the device, execute it there first and then start SDA Unlock. No need to reboot as the changed security policies are active immediately.

i downloaded your kitchen and i ran the htcunlock the the sda unlocker still says the phone is unlockable

So these Orange devices are quite resistant to application unlock. Did you notice that the HTC Unlocker kind of "remote controls" a registry editor? It may be that the changes did not really go through.
It is quite complicated and a lot of trial and error what you will have to do and I cannot advise in detail as I have no such device.
Key is that the application that changes the policy on the device is permitted to do so. Usually as well SDA Unlocker (remotely via the RAPI Policy) or the signed Registry editor controlled via HTC Unlocker can do that. It all goes to the registry keys in HKLM\Security\Policies\Policies where the relevant policy IDs have to assigned the right values (role permissions). You can use the free CE-Command (from ghisler.com) which has a registry tool built in or the same registry editor that HTC Unlcok controls to check if the values that the tools try to write are really written or not. I suspect they are simply NOT written. If you cannot find a tool that can change the policy, then there is another way around this:
The Gold Card method. Get the trial version of "revskills" from www.revskills.com and create a gold card with the device for the "Typhoon". With this card in the device, the SPL will allow ANY (also non Orange) signed ROM to be loaded. Use any non Orange shipped ROM for the Typhoon and load it to the device. This OS should allow to change the application lock and also allow the further steps.
Mind that ROMs for the Feeler or Amadeus have different key-handling (especially for the joystick) - so best you get also a Typhoon ROM for that exercise.
I think in the Tornado Forum was once a description how to unlock a Cingular 2125, possibly similar actions may allow you the first step. Not sure here though.

thanks for your help i beelive that your tool changes the registrey values correctly im nnot sure about this i have tried running it a few times but with the same results

Just to reassure that: Your device is not CID unlocked yet after all the trials you did? What does the SPL tell when you enter "info 2" in mtty connected?
Do you know how to work with a PC registry editor and to connect with the device? There are several that can do that, e.g. "Registry Workshop" or "Smartione" or "CE Regeditor". All these can connect to the device via Active Sync and read out the HKLM\Security\Policies\Policies branch.
Could you just post the export of that branch here?
You can also do that on board the device with CECmd, get into virtual two window mode, on one side go to the branch above (exactly, on top of the second "\Policies"), on the other in any file-directory, can also be root. Then on the registry side press "5" for copy and confirm to copy the "\Policies" branch to the other side. You get a text file called "policies.reg" - attach or post it here.
Finally you could search for the Microsoft tool "security configuration manager". This allows to select the security model "Security off" - once applied to the device the lokiwiz should run with success.