HI,
i own an hp ipaq 6965 wid wm5...i was wondering if there is any way wherein i cud connect my ppc to my laptop via usb n make my ppc to broadcast net via wifi(as in act as a wifi router)?
thnx
63 views n no reply ????
newayz can i hav wm5 aku3 on hp 6965 ??
I'm not sure I understand the scenario. You have a wired connection to your laptop that you would like to share over WiFi through your PPC? Does the laptop not have WiFi? Fluxist recently discovered how to share a PPC's cell connection over WiFi with some registry tweaks. Check this thread:
http://forum.xda-developers.com/showthread.php?t=332360
It might be possible by changing the private interface to your WiFi card and the public interface to USB. Do some searching and reading. Good luck.
thnx for replying bedoig...
i'll re-phrase my question...i have 2 laptops and 1 internet connection..is it possible that i connect my ipaq with the laptop that has the internet line and my ipaq can broadcast that line acting as a router so that my other laptop can access the net thru the link being broadcasted by my ipaq over wifi.
it may sound a bit crazy though bt i read sumthin like this on net n nw tht page is unavailable..so just wanted to knw if any1 over here knows abt it.
can some1 tel me abt wm5 aku3 plzzzzz
thnx
Related
hey all.
thx 4 all the help,advice n guides here.
i have a htc prophet n a windows xp laptop. heard that u can use gprs via bluetooth to connect to internet on pc.howd u do that.plz outline.
You're probably confused... You have to establish an activesync connection by bluetooth and then you'll have access to the web... Just like using the cable but slower...
and how do u setup the active bluetooth connection?
You just have to activate the 'modem link' on the PPC. In Vista at least, all I do is create a new modem connection using the bluetooth modem on the PPC and dial *99#. Pretty simple....
In some ROMs there is an Internet Sharing Option....just activate it, select Bluetooth PAN & connect to the device from PC
could some1 plz outline the steps for setting up the connection, coz all i hear is 'murmuring' ..plz,am still new to all this ppc stuff
Look at the Wiki - start at here's a hint: http://wiki.xda-developers.com/index.php?pagename=Prophet_USBModem
Hello friends!
I spent about 2 days on my phone wondering and trying to get internet connection on my Prophet...So I did it!It's like this:
When you connect your Prophet via USB it will show you new connection....
Go to Start/Control Panel/Network Connections and than click on left side "Set up a home or a small office Network"...So when you finish the wizard,restart your computer (do not disconnect Prophet) and it will work...It was the only way for me to get Internet Connection...I hope I helped someone just like others helped me...Greetings!
can i use GPRS surf the internet with laptop(not with the phone), is there any setting in order to surf the web? thanks!
I think It's not worth it...In Slovenia,where I live,GPRS is at least 10times more expencive than tipycal cable NET...Some of my friends tryed to connect laptop to NET by smartphone,but the speed in really low and also phone bill was shocking...So get standard internet...Greetings!
pleassssse help me ,
i have a laptop with wifi and a DSL internet conection
and i ask
is that possible to access the net (DSL) using my universal
(without using GPRS ) ,via wifi or bluetooth
i mean using my laptop as wireless modem , NOT my universal as modem ,
and thanksssssss
pleaseeeee help
If you're using your laptop on WiFi to access your DSL connection, is there any reason why you don't just use WiFi on your universal?
thanlks for your reply , but my DSL connected via ethernet cable to my laptop ,and my laptop has a wireless lan on it , so can i make my laptop as a wireless modem ?
If you connect the Universal to your laptop it will use the internet connection over the Activesync connection.
:edit: Just reread, but yes you can also set your laptop WiFi connection to Ad Hoc mode to allow WiFi connections to it and use a shared internet connection that way. You better find a HOWTO or something for that though since it is not so straightforward.
dastan said:
pleassssse help me ,
i have a laptop with wifi and a DSL internet conection
and i ask
is that possible to access the net (DSL) using my universal
(without using GPRS ) ,via wifi or bluetooth
i mean using my laptop as wireless modem , NOT my universal as modem ,
and thanksssssss
pleaseeeee help
Click to expand...
Click to collapse
Sure you can - via either a direct, active BT / USB ActiveSync connection OR a Wi-Fi p2p connection or, if you install the Widcomm BT stack, even BT PAN p2p.
Please read my related articles - I've published many articles on all these technologies.
thank u alll
i'll try it and give you my feed back
thanks again
Menneisyys said:
Sure you can - via either a direct, active BT / USB ActiveSync connection OR a Wi-Fi p2p connection or, if you install the Widcomm BT stack, even BT PAN p2p.
Please read my related articles - I've published many articles on all these technologies.
Click to expand...
Click to collapse
thank you
but i cant find your post related to my issue , can you direct me to one of them
i search by your name ,and the result was to much , i cant find anything
thanks again
dastan said:
thank you
but i cant find your post related to my issue , can you direct me to one of them
i search by your name ,and the result was to much , i cant find anything
thanks again
Click to expand...
Click to collapse
See the Wi-Fi / BT p2p links at http://www.pocketpcmag.com/blogs/menneisyys/102005MPPPCGames.asp
thank you veryyyyyyyyyyyyyyyyyyyyyyyyyyyyyy much
i'll try it , thaaaaanks
I'm not sure if I'm the only daft bat that does this. But in the past i would use my Hermes under wm6 as a Bluetooth Pan Internet sharing connection with my BA as it had the ability to either Host or establish a Bluetooht PAN link.
Since i've upgraded the BA to Wm6 I've noticed that as with my hermes the betowrk options are severly depreciated. and now when i search for Bluetooth services on the hermes it only shows Dial up networking but doesn't give you the option of Bluetooth PAN as a service it can find or give. also Can not set the init string to send to Bluetooth modem if choosen. thusly cannot tell it the access point etc.etc.
Is there any advise possible to help me link the BA with my hermes using Bluetooth PAN for the internet sharing through the hermes ( yea i know but HSDPA is far faster then the BA's basic 3g hehehe)
RESOLVED: the problem is in the Bluetooth stack of this rom. in short the Wm6 rom appearantly can't find a PAN connection at all as I tried to find the one on my PC at home and it definatly didnt' show anything accept a serial port. However my hermes could see the personal network conenction and once reflashed to the t-mobile latest rom it can now establish a PAN network conenction with pc or hermes300.
guess the bluetooth profiles in the rom for the BA in wm6 are a bit lacking at moment
It works great in Vista
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
edwardgonen said:
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
Click to expand...
Click to collapse
cool, only problem here is that my Hermes 300 ( t-mobile vario II) using Schaps 3.54c Wm6 Rom has the bluetooth Pan driver for internet sharing, as well as the modem link yea? And the Blue angel now being Windows mobile 6 doesn't show like Wm2003 did. in Wm2003 you could create a Bluetooth Netowrk connection for PAN to the hermes. Or a bluetooth serial connection to the hermes Modem link. Now it only shows Dial up networking in both since they are both wm6. And also doesn't give you the option of an init string entry in the advance network options for the AT+CGD init string that also lists the part "ip", "general.t-mobile.uk" which is the access point when doing Bluetooth DUN.
How would i establish a PAN connection to the hermes Internet sharing with the BA under Wm6 from helmi is the real question?
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other then me has tried this.
Hermes300 windows mobile 6
Blue angel Helmi Windows mobile 6
cannot make a Pan connection in either direction Hermes to Blue angel, or Blue angel to hermes.
this means potentially people with Pda's ( ie: Compaq or HP Ipaq's runnign Wm6 ) or other mobile with wm6 will not be able to use the Helmi rom for internet sharing and really are better off leaving WM2003se on as has more compatability in that regard.
If however others have tried this and found a way to get it working please post =)
Me too
cyberjak said:
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other than me has tried this.
Click to expand...
Click to collapse
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
HeMan321 said:
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
Click to expand...
Click to collapse
you can still use the Modem link if you can get it to create a serial port bluetooth link , ie: pair the devices and select Serial Port. then under the connections then you would tell it to use Bluetooth Modem
and put in the advanced dialing string for bluetooth DUN.
there are a few threads about bluetooth DUN on this forum.
the only thing i can thnk of that would make this not work however is if the roms your using are cooked roms and the profiles in the bluetooth stack are missing on 1 or both for the features suggested.
this is what stopped me from having this work as the wm6 on the Hermes and on the Helmi rom are missing the profile for HOSTING a PAN directly without internet sharing and dont' offer bluetooth serial port as an option
Hi to all,
i have a tytn ( schap's 3.54c wm6 rom ) and i'd like to know if there is a way to connect my laptop to internet using an ics connection throught wifi instead of usb or bt.
Now i'm using ics throught bt and i have a transfer rate up to 60 kbytes/sec when tytn is on hsdpa network ( 150 kbytes/s when using ics throught usb ) .
I think that ics throught wifi ( if possible ) will allow max transfer rate without the need of the usb cable... i hate cables , wireless is better
THX in advance .
vdavide
vdavide said:
Hi to all,
i have a tytn ( schap's 3.54c wm6 rom ) and i'd like to know if there is a way to connect my laptop to internet using an ics connection throught wifi instead of usb or bt.
Now i'm using ics throught bt and i have a transfer rate up to 60 kbytes/sec when tytn is on hsdpa network ( 150 kbytes/s when using ics throught usb ) .
I think that ics throught wifi ( if possible ) will allow max transfer rate without the need of the usb cable... i hate cables , wireless is better
THX in advance .
vdavide
Click to expand...
Click to collapse
i googled, found this link, might not be the solution you want. but do let us know if you got anything to work.
http://mobilesociety.typepad.com/mobile_life/2006/08/how_to_share_yo.html
Thx mangokun , but this isn't what i need ... it explain internet sharing from 2 or more pc assuming 1 of them is connected to internet vai the mobile device through usb/BT .
I need something like the existing Internet Connection Sharing application built in WM6 but using the internal wifi of the tytn instead of usb/bt.
thx again
vdavide
There currently is no phone (period) that shares it's data connection over WiFi.
dragon_76 said:
There currently is no phone (period) that shares it's data connection over WiFi.
Click to expand...
Click to collapse
Thx , understand .
And an application running under WM6 ( or WM5 ) to do this ?
I googled for but found nothing
Bye
vdavide
I am able to do this using a ppc proxy software...
http://forum.xda-developers.com/showthread.php?p=1532475
khemu said:
I am able to do this using a ppc proxy software...
http://forum.xda-developers.com/showthread.php?p=1532475
Click to expand...
Click to collapse
Hello,
I have samsung c6712 with wifi connected with internet near internet company with router as it is free for me, setting and pasaword is setted by those guys on my phone but they didnot give me their password and settings.
i like to run/use internet on my pc (xp32) with cable connection. How can I use that
[email protected]
there is some possibilities.
pc>blutooth>mobile>mobile network internet (gprs/3G)
pc>blutooth>mobile>mobile wifi internet (WIFI) or (u can use wifi device in usb port to connect your pc to internet)
pc>usb>mobile>mobile network internet (gprs/3G)
pc>usb>mobile>mobile wifi internet (WIFI)
all of above are possible.
Hello how can i use my WM6 phone as a modem for ma Mac os X 10.5 ?
Provider is o2 Germany
I use the Internet Connection Sharing tool over bluetooth pan... then connect to the network on my device using my macbook's bluetooth.
thank you that works well and god may curse samsung for the i780 it takes me 3 hours to find out that BT-Pan net privat network settings on WIFI Menu to work^^*g*
good day goys..
i am using my mobile as a woreless router...
doesnt matter as long as u r getting internet connection on ur mobile u can share it via a program caller wmwifirouter.
reply if u guys want cab file.
this program will make ad hoc connection which ur computer will identify ( on mac or windows)
simply connect on that and ur mobile will issue ip address to laptop ( it will take around 30 secs). tha n u can use laptop with shared internet from ur mobile.
works beautiful on my mac and pc
That sounds interesting
Would you mind posting a link to the cab file?
WMwifiRouter
Thanks for the tip. WMwifiRouter works great!
I tried Internet Sharing (BT PAN) and USB Modem but both, for whatever reason, provided fractional transfer rates. (see: http://forum.xda-developers.com/showthread.php?p=2122160#post2122160)
Has anyone tried PAN
with the new MacBook Pro - Late 2008? I can connect but the performance is 2-3k at best!! It's acting like the MacBook Air, they can't tetherer with bluetooth either.
if you're looking for wmwifirouter, found the trial version via my friend google, here;
http://global.wmwifirouter.com/consumer/
(warning: extremely cheesy site)