Related
Hi,
I've got my O2 XDA Exec set up just how I want it with regard to connection to the internet, and my LAN via Wifi and GPRS - that's all great. It simply uses the connection that's available at the time, and accesses stuff just fine. I haven't had to mess about with "My ISP", or "Work" connections etc - I just have an "Internet" connection, and it seems to do the job, just like I would on a regular laptop.
However, on a regular laptop, I can set up a VPN connection that I dial at will that will connect me to either my home network when I'm out and about, or to a Windows 2003 Server I have co-located. The only problem is, I can't seem to get my Exec to be able to do the same. I can set up the VPN details under "Connections", no problem, and I can even tell it to connect, but looking at the syslog on the router I can tell that no traffic ever comes close.
I've tried a couple of 3rd Party VPN clients (Bluefire really screws up your machine if you try and install to SD Card!), but these seem to be geared up to more complex VPN setups, and don't seem to handle my setup which, I think I'm right in saying, uses PPTP - they all seem to want to use IPSec, but at least I did see them trying to access the VPN on the router.
Can anybody offer any solution?
Cheers,
Steve.
Hi Steve,
I'm currently trialing Bluefire and using it successfully to log into my work network. As you say it is for more complex VPN configuration but I must admit I know little about this. Having used Movian before in WM 2003, it is usual that loading the software to an SD card is not supported, it must be installed to the device memory. I have also trialed AnthaVPN but this screws up my Wireless/GPRS connections.
John.
Yes, I tried Antha too, and screwed stuff up, so I've had to restore from a backup.
The annoying thing is, the built in VPN client should work, I think, I just can't get it to work.
Any suggestions?
Cheers,
Steve
Looking for some help please. At home all of this works fine so no issues there. However at work when connected via USB I cannot use the internet pass through on Activesync. I think its because we use a cache for all IE activity, e.g http://cache'domainname'.co.uk
Strangely I can collect email through the device, its all activity such as pocket IE, RSS readers, SPPB Weather that wont connect.
Anyone any ideas on how I can get round this? I use a HTC Wizard, WM5
cheers
Dave
so do your isp
and all routers from you to the site you access to some degree
Sounds like your corporate network uses QoS and packet filtering to feed off all traffic on port 80 through their cacheing proxy server.
I was going to say, try going onto your device, into the Network Connections options, and set up the proxy server settings (if you know them) in the appropriate section of the Work connection... Then, when you next connect, make sure your connection connects to 'Work', not 'Internet'.
However, as you're connecting via USB, you'll have to set up your computer as a proxy server in its own right to funnel the traffic to your device through the cacheing proxy... Which you might not be able to do. Tricky one, this.
As I've never used my device on the Internet via USB, I couldn't honestly say... I'll do some reading up into it though and if I uncover anything I'll add it onto here, I hope you get it to work though.
cheers, got it working mostly. It seems a bit tempremental, some programs just wont work but the majority do so i'm happy. Thanks for the help though
Dave
My searches on the web haven't yielded much help or information so I thought I would come to the experts...
I have a Treo 750 that I just "upgraded" to WM6 2 days ago. I noticed that DUN has gone away and was replaced by ICS. After configuring my laptop to use that instead of DUN I connected and was surfing the web. My problem now is VPN. I travel frequently (luckily I'm in the office until Jan.) and regularly used my phone to connect to the corporate network via VPN. I also work with a lot of other companies and have VPN access to their systems as well. Basically now I can open my Cisco VPN client, connect to a VPN gateway, authenticate, get assigned all the appropriate IP information, but cannot communicate on the network. What gives? Is there a solution to this? If not, what the heck was MS thinking when they did this!? My phone is basically useless for one of the major reasons I bought it...
Any help is appreciated!
thanks!
Ok, further searches found that DUN can be added back into WM6 via a cab that was posted here at the XDA forums. I installed it and the DUN service is now visible again. I unpaired by phone and laptop, re-paired, and included DUN. Now when I try to connect, I get the DUN connection box after the bluetooth connection is initiated but when I click DIAL I get the DIALING... prompt, followed by Error 678: The remote computer did not respond.
Anybody get this working on a Treo 750? Thoughts, ideas suggestions?
What is the ip address you are getting via the cisco vpn client
It maybe that it is in the same subnet as the ip address assigned to the pc from the wm6 ics. The ICS gives the address 192.168.0.1. and if your Cisco is also giving a 192.168 address then you will have two routes for the 192 address range thus giving you the problem when accessing hosts.
If this is the problem Im pretty sure you can change the address allocated via the ICS using a registry editor. If not you may be able to get work to use a different range for you on the cisco vpn.
Our corporate network is 172.x.x.x so it's nowhere near the 192.168.0.x assigned by the phone. When I look at the route in the VPN client I see 192.0.0.0, 10.0.0.0, and 172.0.0.0 so I am assuming 192 is my laptop, 10 is the phone, and 172 is the corporate network.
I'm guessing NATing is the problem. I've been reading that if I use a different APN (isp.cingular instead of wap.cingular) there is no NATing. I've tried both, and I've tried turning off and on the "force AT&T" proxy setting to no avail.
Tried the DUN cab hack that is floating around for WM6 also. The service is active again and I can also add Modem Link back in and my laptop sees my Treo as a modem but when I dial I get an error stating the remote computer did not respond. I'm guessing along with going from WM5 to WM6 AT&T also updated the radio so the old communications protocols don't work anymore?
Hello Sir,
I have exactly the same problem... I have successfully connected via VPN, however unable to communicate with any devices on that network... Then what is the use of VPN on the phone? I've tried searching online for answers, but no luck... People are having the same problem but no one knows how to solve it... I'll try and trouble shoot this problem more as soon as my exams are done...
Hi
Working successfully for me. I am using Imate jasjam wm6. Pc using cisco client connecting via ics on phone. I have telstra 3g connection tested ok on both telstra.internet (Nated ip) and telstra.extranet (real ip).
You are correct it may be an nat issue. Can you check that your transparent tunnelling is on as follows: right click on your connection entry in cisco client and select modify then transport tab. Check that enable transport tunneling is enabled ipsec over udp(Nat/pat).
The other thing to check is that the cisco vpn server aslo has transport over Nat on as well.
Also are you sure your corporate ip range is 172 or is that the range given by the cisco vpn to clients.
Transport tunneling is on (always was). I'll have to check with our network admin and check on the VPN server setting...I guess as long as I have connectivity back to the office, I don't need it that badly for all the customers I need to connect to at various times.
Yep, positive on the corporate IP. Right now it is 172.28.1.87 and I'm in the office.
Thanks for the help so far. Got any other suggestions on how I can troubleshoot further?
One other thought...should I modify the registry on the phone to assign a different IP address to my laptop? Would that help?
Same Problem
MX. I am having the exact same issue but with Securemote VPN. I've looked through the registry and found the assigned address, but I'm wary of changing anything until I can find some more information.
Anyone out there ever change the DHCP configuration for their phone?
Somewhat related question?
Im attempting to route my connection on my mobile through a laptop acting as a wan bridge, then uplinking it into the router. The issue Im having is that XP and WM6 both use the same IP Block. Ive read and read and cant find much to tell me how to change the WM6 IP BLock to something like 192.168.2.1 rather than the default 192.168.0.1
Does anyone have any pointers? Ive looked through the registry. There MUST be a simple way to change a default.
To clarify my setup, I am using ICS Via USB into a UMPC laptop running XP. The UMPC is set to share that same connection back out over Ethernet. The ethernet runs into my WAN Uplink on the router and then back out via wifi/rj-45
This setup works as I have done it using Wifi with other networks, and I can chose the "Lan3" to share under the advanced settings on the UMPC. The reason I dont just share out via Wifi from the start is that Wifi on my Kaiser and Raphael both make the device to hot to charge, thusly killing the battery within a couple hrs of sharing. If I share via USB , it stays pretty cool and still charges.
Anyone have any pointers?
I have already tried tricking XP into using the Lan on another block but as soon as you try to share the USB lan, it reverts back to the 192.168.0.1
The only way I can imagine is a registry modification or a program change in ICS.
Thanks Much!
I have been searching for more than 3 hours for some kind of driver for my T-Mobile Dash, to use it as a GPRS/EDGE Modem. My iBook is an old G3 model, so even if I were willing to purchase Missing Sync (which I'm not, btw), my iBook is not supported, as it is not a G4 or better.
I am looking for a FREE driver for OS X 10.4 Tiger, specifically an "RNDIS" driver. I am not particularly looking for speculation. I believe I have the correct modem scripts, but I can't get my Mac to see the USB Modem. Yes, I have put my Dash into ICS mode. Yes, I am running Windows Mobile 6. Yes, I have all of the updates to OS X. Yes, I have tried searching the forums (this one, and several others). Yes, I have tried "Googling it", which produced much good information, but no solutions to my problem. Although my Dash is Bluetooth enabled, my iBook is not. Yes, I know I can add a USB Adapter. I may well do that in the near future. Right now, however, I'm just looking for an RNDIS USB driver for Mac OS X. I don't need Synchronization features, at the moment.
Anyone have any ideas??
Correction: Does anyone have any "good" ideas??
Thanks,
--Aaron
I just wanted to touch this and see if anyone had any information to help. My girlfriend has a new Pantech Duo and I would like to get USB tethering working for that. I did find a couple sites that may help (HowTo: USB Internet Sharing With Linux And Windows Mobile 6), but I don't know enough about the technology to feel comfortable trying it. Thanks.
I use my wizard as a modem sometimes just using Internet Sharing in my TNT Rom. You may be able to find a .cab for it. From there just use activesync/WMDC. I haven't tried it on activesync, only on WMDC.
he's using mac
download wmwifirouter by chainfire or the free trial of walkinghotspot (if your handset and mac have wifi), or a micro bluetooth dongle if not.
leoni1980 said:
download wmwifirouter by chainfire or the free trial of walkinghotspot (if your handset and mac have wifi), or a micro bluetooth dongle if not.
Click to expand...
Click to collapse
Pantech Duo doesn't have Wifi. That was my first attempt before I realized it didn't have it, because I'm using that solution with my Kaiser.
RE: bluetooth. I haven't had a lot of success with a reliable connection. I've tried with my Kaiser and successfully configured it, using it to connect three or four times from my house, but as soon as I went on the road, I couldn't get it to connect at all, using the same steps as before. I'm sure that's either karma or equipment smarter then operator, but I'm hoping for a USB solution for simplicity (theoretically) as well as the better data throughput.
SyncMate
Well, if you are using a Mac then here is what i used to do before I got Missing Sync.
For Syncing contacts and dates and such i used Eltima Softwares SyncMate. Runs pretty good and can be done using the USB cable. It also provides the option to do it over Wifi, which is faster. The Full version allows your to Sync even more stuff I believe.
For Syncing files, I simply paired my phone with my mac and transfered the mp3's, jpg's, etc.
Hope this helps,
Paul
Welcome to the hell which is created when you have a Mac and a WM device!
I have been mucking around with trying to get my internet connection shared with my MacBook pro for a couple of months. Here is what I have tried
- Bluetooth PAN - There is an issue with the MacBook Pro whereby the bluetooth PAN will produce incredibly bad latency issues rendering it useless
- Modem Scripts (Bluetooth)- Have never found one which would connect....I have tried a few
- Mobile Stream (USB) - Never managed to get a connection. The support team said that they had never seen the issues I sent in logs. They will investigate and hopefully resolve in future releases.
-PDAnet (Bluetooth)- It actually works! although it seems to hang the dialer process on the Mac periodically which requires a reboot to resolve
-Wifirouter - It works although it caused issues with access points in the office and drained the battery very quickly.....even when powered from the MAC it would empty the battery. Worked OK when using a mains charger.
-VMware Fusion to XP desktop (USB) - Works and works well however you can't provide (well i havent got it working) an internet connection to the Host Mac.
At the moment I am using the PDAnet 'solution' but I am always looking for something more reliable. A usb connection would be better and more reliable as there seems to be big issues on the Mac bluetooth environment.
Cheers
Aidan
Hell, I couldn't even find an RNDIS driver for windows (apart from installing ActiveSync) which is why I made the Linux post.
Yeah, OSX is *nix based, but I don't think you can use Linux packages on it, what I know about macs could be written on the back of a postage stamp though.
Regarding the VMWare solution, did you try enabling internet sharing for WinXP in the VMWare session (using a different IP to the one the Mac uses) and set the default gateway of the Mac to the IP of the XP machine in VMWare?
What I mean here is that the PPC shares the connection to the VMWare windows machine via USB and the VMWare windows shares the connection to the Mac via TCP/IP.
To be honest I never really played about with sharing the virtual machine with OSX too much. I was a bit put off with running fusion like that all the time as it sucks the life out of the battery when out and about.
Until a better solution is available I will stick with PDAnet. It does put me off windows mobile (slightly) moving forward. It would be interesting to see if the Bluetooth PAN connection works correctly without the latency issue on the diamond when it is available. If it worked properly it would be the best solution.
Cheers
Aidan
Read http://forum.xda-developers.com/showthread.php?p=2398248 for a review & comparison of WalkingHotSpot
With VMWare Fusion, setup VPN connection for the OS X host to connect through guest
evilc said:
Hell, I couldn't even find an RNDIS driver for windows (apart from installing ActiveSync) which is why I made the Linux post.
Yeah, OSX is *nix based, but I don't think you can use Linux packages on it, what I know about macs could be written on the back of a postage stamp though.
Regarding the VMWare solution, did you try enabling internet sharing for WinXP in the VMWare session (using a different IP to the one the Mac uses) and set the default gateway of the Mac to the IP of the XP machine in VMWare?
What I mean here is that the PPC shares the connection to the VMWare windows machine via USB and the VMWare windows shares the connection to the Mac via TCP/IP.
Click to expand...
Click to collapse
I was reading this thread and you gave me the idea which led me to a workable solution so I thought I'd share back. I'm in the same boat as many ppl with latest MBP which doesn't work well with BT PAN (slooooowwwww). I sort of needed Fusion anyway since I'm starting to write WPF apps and performance is terrible over RDP from OSX (different subject). Anyway, here are some keys to getting this to work:
1. Setup a private network (not bridged or nat)
2. Install activesync on guest and fire up 'Internet Sharing' from WM6 device and connect device to Mac with USB cable.
-at this point you should be able to get online from the guest OS through the mobile device as previous post indicates-
Here is where the fun starts:
3. Create an advanced network connection on the guest (accept incoming connections, aka VPN connection)
4. *IMPORTANT* Go to the TCP/IP settings for the advanced network connection and setup a range of IP addresses in the same subnet as the active interface attached to the WM6 device (run ipconfig to determine). Make sure that 'clients can request their own IP address' is unchecked. Make sure this range falls outside of the IP address assigned to the guest interface from the WM6 device.
5. On the host Mac, create a new VPN connection (PPP) and set the host to the private IP address assigned to the guest (again, you can determine that through running ipconfig on the client). *IMPORTANT* Go to the advanced settings for the VPN connection on the Mac and set the DNS to point to the IP address of the router of the guest WM6 device interface.
6. Connect to the VPN from the Mac host and you should be off and running.
It works flawlessly with very good speed (relatively speaking) over the 3g connection. To get online in a pinch, now I just need to fire up the guest (which takes just a couple of seconds from a saved state), connect my device via usb with internet sharing started, and then connect to the vpn from the Mac.
Not sure if I should post this question here or somewhere else but since I am using my TMOUS HD2 for remote desktop I decide to put this here.
I tried the remote desktop over my own wifi it works great but just wondering if I can use it over 3G... I tried but doesn't seem to be connecting.
Also does anybody know the list of ports that are blocked on tmous 3g? Thanks a lot!
over 3g don't forget you need to use your external ip address, (I.e not the 192.168.... addresses) and then in the router you need to set up port forwarding from the router to your chosen pc.
been looking for a solution to this for a while. Seems people give out solutions that never work.
I've just done this as a proof to myself, and yes you can do this.
Assuming you have a router, then you need to set up port forwarding from the router to your internal pc, port 3389 TCP.
On the PC, system properties - remote - make sure you choose the middle option.. ' allow connections from computers running any version..'
Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.
With data connection active, run remote desktop
give it your routers external IP address (not the 192.xxx.xxx.xxx address, , thats your internal address)
no need to fill in user and pass, it will give you the PC's login screen. Domain left blank too.
Note the connection in teh top bar, , edge in one, H in the other. No wifi.
EDIT - if your carrier blocks port 3389 which some apparently do, bypass it by using a different external port.
So in the routersettings you would forward port, say, 3456 external to 3389 internal, and then in remote desktop on the phone, you would put the ip address as (example) 64.38.226.18:3456
samsamuel said:
I've just done this as a proof to myself, and yes you can do this.
Assuming you have a router, then you need to set up port forwarding from the router to your internal pc, port 3389 TCP.
On the PC, system properties - remote - make sure you choose the middle option.. ' allow connections from computers running any version..'
Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.
With data connection active, run remote desktop
give it your routers external IP address (not the 192.xxx.xxx.xxx address, , thats your internal address)
no need to fill in user and pass, it will give you the PC's login screen. Domain left blank too.
Note the connection in teh top bar, , edge in one, H in the other. No wifi.
EDIT - if your carrier blocks port 3389 which some apparently do, bypass it by using a different external port.
So in the routersettings you would forward port, say, 3456 external to 3389 internal, and then in remote desktop on the phone, you would put the ip address as (example) 64.38.226.18:3456
Click to expand...
Click to collapse
Ugh, I just can't get it. I have data connected at all times. I try this, but I use windows XP (which for some reason almost everyone who shows how to use this on the HD2 uses Windows 7). Port forward to my internal IP address. Set up to connect to my external IP address (yeah im on a network). Always gives me those 3 reasons why it can't connect and I never got it to work. I just dont get it.
what i changed from stock rom to get RDP to work
in settings/connection change your data access point from whatever it is currently (write it down) to wap.voicestream.com and try (for me that also worked for skyfire). some ports/protocalls may be blocked from the default access piont.
Phenomenon said:
Ugh, I just can't get it. I have data connected at all times. I try this, but I use windows XP (which for some reason almost everyone who shows how to use this on the HD2 uses Windows 7). Port forward to my internal IP address. Set up to connect to my external IP address (yeah im on a network). Always gives me those 3 reasons why it can't connect and I never got it to work. I just dont get it.
Click to expand...
Click to collapse
Works fine for me all the time. I have XP Pro.
I've set the IP on my computer to be static (192.168.1.199).
I changed my Remote desktop listening port to 3399 (changes in registry and windows firewall. Also change in Antivirus firewall if you have one.)
I have a linksys router. I've set the port forwarding in "Games and Applications" as all requests to port 3399 will be sent to 192.168.1.199.
I open Remote Desktop on my HD2 and point to my external IP address with the port number.
example: 24.123.456.789:3399
Its been working fine for me for a month. Speed is good too.
samsamuel said:
I've just done this as a proof to myself, and yes you can do this.
Assuming you have a router, then you need to set up port forwarding from the router to your internal pc, port 3389 TCP.
On the PC, system properties - remote - make sure you choose the middle option.. ' allow connections from computers running any version..'
Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.
With data connection active, run remote desktop
give it your routers external IP address (not the 192.xxx.xxx.xxx address, , thats your internal address)
no need to fill in user and pass, it will give you the PC's login screen. Domain left blank too.
Note the connection in teh top bar, , edge in one, H in the other. No wifi.
EDIT - if your carrier blocks port 3389 which some apparently do, bypass it by using a different external port.
So in the routersettings you would forward port, say, 3456 external to 3389 internal, and then in remote desktop on the phone, you would put the ip address as (example) 64.38.226.18:3456
Click to expand...
Click to collapse
To you or anyone else who can do this, are yall using Professional Windows OS? or Home?
pro.
remote desktop isnt included in home. (Maybe in home premium, possibly)
there are work arounds, a 3rd party vpn for instance, or there are ways to get remote desktop onto certain home versions.
samsamuel said:
pro.
remote desktop isnt included in home. (Maybe in home premium, possibly)
there are work arounds, a 3rd party vpn for instance, or there are ways to get remote desktop onto certain home versions.
Click to expand...
Click to collapse
I use this with Win7 Home Premium, which does not have RDC enabled. However, you can simply patch it to enable RDC:
http://thegreenbutton.com/forums/t/79427.aspx?PageIndex=1
I have no problem RDC to that machine from my HD2 from both in and outside of my network. As mentioned, you need to edit your router settings to enable port forwarding to the machine(s) you are trying to access remotely. I use 3389. The above utility that enables RDC on W7HP also enables port 3389 to get through windows firewall on that machine.
no, still can't get it to work right. Even with Remote VNC workarounds it's still not getting the connection. For some reason, any port checker (even when I configure the router to forward the port to my internal IP) says that the connection is refused. So I dunno wtf it is. I'm guessing either it's Comcast that's blocking this port or the router's messing up, or Tmobile is messing up, but damn it's aggravating as hell finding a solution.
it's not work,I need help
I tried some times Remote Desktop over 3G ,but it's not work,before I connected , Then on the phone, you need the data connection active before you start remote desktop, it wont start it itself.,I actived data connection by use opera browser,and the connection in the top bar,the icon "H" appeared in the top bar,does the Remote Desktop support the connection way of 3G ? please tell me what to do ?thanks a lot ! sorry for my poor english.
Phenomenon said:
no, still can't get it to work right. Even with Remote VNC workarounds it's still not getting the connection. For some reason, any port checker (even when I configure the router to forward the port to my internal IP) says that the connection is refused. So I dunno wtf it is. I'm guessing either it's Comcast that's blocking this port or the router's messing up, or Tmobile is messing up, but damn it's aggravating as hell finding a solution.
Click to expand...
Click to collapse
Try connecting to your home computer from another computer outside. Seems to me that your home computer is not setup to allow RD from outside.
kcaj32 said:
Try connecting to your home computer from another computer outside. Seems to me that your home computer is not setup to allow RD from outside.
Click to expand...
Click to collapse
Yes, and phenomenon you should really try to establish the connection first while connected to your home network with your phone, just to make sure everything internal is setup properly before you start messing with getting the external connection to work.
Phenomenon said:
no, still can't get it to work right. Even with Remote VNC workarounds it's still not getting the connection. For some reason, any port checker (even when I configure the router to forward the port to my internal IP) says that the connection is refused. So I dunno wtf it is. I'm guessing either it's Comcast that's blocking this port or the router's messing up, or Tmobile is messing up, but damn it's aggravating as hell finding a solution.
Click to expand...
Click to collapse
Your router probably has it's own firewall. Can you connect to your computer through your own network?