O2 Atom life FM Radio problem? - iPAQ rw6828, XDA Atom General

Hi There,
I did search many places and many sites on internet but don't know how to overcome this issue. Herein my problem:
Actually, I am using a O2 Atom Life Pocket PC phone and I want to hear FM radio on Bluetooth headset (Wireless and Handsfree feature) but I cannot use Bluetooth Handsfree to hear FM. My problem is When my bluetooth device was actually paired with my Pocket PC then I open FM Radio player it shows "FM Radio requires Stereo Headset to be connected to function". Please note that I can play and hear MP3 music normally with my Bluetooth handsfree device.
Please tell me is there anyway to overcome this problem? Or I need to make any configuration or any software for this to hear FM radio with bluetooth handsfree.
I am look forward to getting your reply soon.
Best regards,

I think it depends on the fact that the FM-Radio needs an antenna. And since this is provided by the cable of the headphone it cannot work without it.

Thanks for your response. I am still looking for the others ways to overcome this inconvenience. I hope I can find some tools, registry hack or software to fix it. If you guys have anyway to do this please share me.
Best regards,

[email protected] said:
Thanks for your response. I am still looking for the others ways to overcome this inconvenience. I hope I can find some tools, registry hack or software to fix it. If you guys have anyway to do this please share me.
Best regards,
Click to expand...
Click to collapse
I'm afraid that there will never be a possibility to "hack" this purely physical problem. There won't be another possilbility as to "simulate" the presence of a headset. Try the following: Buy a 2.5 mm headphone-jack and solder a single wire to pin 1,2 3 or 4 (I don't know which one is the right one for the antenna). Note that by inserting the jack the speakers will be muted anyway. I'm not sure whether the bluetooth function will be influenced by that, but I don't think so.
Good luck!

Sorry about resurrecting an old thread, but I wonder about something of the same. I'm gonna buy one of those Motorla S9 headsets, and I would like to use it for radio as well. Is it possible to use A2DP to listen to the radio, or can I only get regular low quality BT audio? I know it's possible to use the radio via BT if you use the BTAudio Toggle program (which I believe did origin here on the forum).

Mastiff said:
Sorry about resurrecting an old thread, but I wonder about something of the same. I'm gonna buy one of those Motorla S9 headsets, and I would like to use it for radio as well. Is it possible to use A2DP to listen to the radio, or can I only get regular low quality BT audio? I know it's possible to use the radio via BT if you use the BTAudio Toggle program (which I believe did origin here on the forum).
Click to expand...
Click to collapse
pls help me.
my atom can't searcing the FM radio frekuensi..report selfdiag..FM radio erro=0

I usually use the FM radio for my Atom Life. When I exit the FM Radio program, the unit becomes extremely slow, no activity. I have to reset to use the phone again. Does anybody experienced this? Please help.

Related

Upgrade Pocket Bluetooth Tools 1.0.1.2

The current version 1.60 of the ROM includes already a virtual serial port but unfortunately it is a dynamic port, which is not visible to many applications. Also the ActiveSync support is difficult and complicated to use and if you want to synchronize with different computers you have always to couple the device again.
For future releases I plan the following improvements:
Support for Bluetooth headsets
Support for Bluetooth network access points
Send contacts and files through Bluetooth
http://www.angeltowns.com/town/bluetooth/
i am looking also for handsfree bluetooth support if any help on that
Yeah, headset works fine, it's the handsfree profile we need, that's the one adding enhanced features....
Do you know why some headsets work better than others? I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
gratefuled said:
Do you know why some headsets work better than others?
Click to expand...
Click to collapse
Maybe because of the headsets itself ? I bought a HBH-35 and can do [/quote]anything with it, walk out of range and back, turn it off and on, reset the MDA, chanrge the headset etc etc. without having to re-pair...
I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
Click to expand...
Click to collapse
What headset-functions do you mean ? Caller ID ? Voicedial etc. ?
That's not in the headsetprofile, that's in the handsfree profile. the headsets with enhanced functions use the handsfreeprofile also, nut just the headsetprofile...
downloaded and installed 1.0.1.2 fantastic my new bt gps works! However I can not use my gps and hbh-65 headset at the same time, any ideas please
Simply stated I was wondering if the new blutooth fix might help the Jabra BT250 work better. I know other headsets work without issue, but Jabra seems to have some problems, and I doubt that this is a Jabra problem, I believe it is a BT Device profile issue.
Can I have another link to the software cause the link is blocked from my ISP, or can any body upload it here or any other palce...
Best regards,,,
I have a new HBH-200, it works ok to answer a call but all the other features are not working, such as caller number etc.
Like i said; It's not i the headsetprofile. The headsetprofile doesn't do much except making a wireless headset possible. Answer, dosconnect and talk and listen, that's all...
Everyting else is in the handsfreeprofile (handsfree is used for advanced options for headsets and carkits)...
Link down????? :?:
not for me
Handfree Profile
I have 2 phones, XDA II and a Nokia 8910i.
My bluetooth Headset is the Ericsson HBH65.
To my surprise, I have paired the HBH65 with both phones and I am able to receive calls from both phones (not at the same time of course) without any problems. Whichever phone rings first get the use of the HBH65. In conflicts however, the Nokia seems to have priority over the XDAII, which is fine with me, but I am so happy that it actually works.
As others are mentioning, I am really missing the enhanced functions of the Handsfree Profile. Can anyone suggest any solution or perhaps work on resolving this issue as a lot of people are waiting for this. I was aware that Towas was planning to release a new version to his BT Stack Fix, has he got anywhere with that by any chance? or anyone else?

Sound in bluetooth handsfree

Hi,
I've got a Qtek s100. Recently I bought a Thomson BT handsfree. With regards to handsfree function it works perfectly, but I would also like to use it to listen to music. Is it possible to create some kind of audio gateway to my handsfree, so that all sound played on my qtek is heard in the handsfree?
Sorry if this has already been answered, but I didn't find anything about it. Please point me in the right direction if so.
Also, I read something about a camera fix. Is there one, and where can I get it?
I have the standard ROM and MS bt stack. No upgrades. I also have MS Voice Command installed.
Best Regards,
The sound issue isn't possible.
You can find the latest camera software on the FTP. Doesn't help much though.
Impossible, why?
Why is it impossible? Because of phone version, bluetooth stack or is there just no software for it?
It is possible to send any kind of audio over the bluetooth protocol. We're already sending voice audio, so it shouldn't be that different to send music. Some Nokia phones has this implemented.
And also, wich ftp? The link points nowhere...
Best Regards,
You haven't found anything about the sound routing problem in conjunction with bluetooth? Ridiculous, really.

again... BLUETOOTH ISSUES

hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga

Radio fm in bluetooth

Hello. I've bought the blackstone and I need hear the radio fm throught the bluetooth (jabra 530, sheinheiser vmx100 and others).
It can be?.
Thanks.
Regards.
don't have a blackstone but my radio app let me choose headset or normal speaker
but when connected to bluetooth headset as stereo headset my x1 still play radio out the pda speaker
Then ...
...it is impossible hear the radio by bluetooth headset?.
In the kaiser I heared perfect "the .mp3" but in the blackstone
I can't.
I need make it.
Regards.
Hi Imanoltxo, This has been asked several times on several device sub forums.
Unless some one writes a new device driver (very unlikely as it is very complicated and time intensive) for the FM radio, answer is a big NO.
http://forum.xda-developers.com/showthread.php?t=490738
Click to expand...
Click to collapse
BTW you can plug in a bluetooth transmitter to the 3.5 mm jack and hear the radio via BT. But then u got inconvenience of carrying one more device with you...

FM Radio with bluetooth headset

Hi,
I would like to hear FM radio on my bluetooth headset.
I know FM requires the wired headset in order to have the antena, I'm OK with it. The problem is that the sounds is in the wired headset and not my BT one.
I seen a post in the "HD general" section where a soft is recommended, unfortunately, the soft in is russian langage and I got error when trying to use it.
Anybody have a solution ?
Thanks,
JBT1
I would like to see a solution on this as well... I"m working in a place with a lot of steal walls, therefore i can only listen radio stations at the window. It would be really cool if i could leave the phone & the headphones at the window and have the sound in my bluetooth headset. Any idea if/how this could be done?
Take a look at this:
http://forum.xda-developers.com/showthread.php?t=584828

Categories

Resources