Database Users

jam lcd replacement

Anyone replaced their own Jam lcd/touchscreen? I'm thinking of getting a replacement screen off ebay for $100. It doesn't look all that difficult, but I want to make sure it's not harder than it seems to do a self-replacement.

nvrnuff said:
Anyone replaced their own Jam lcd/touchscreen? I'm thinking of getting a replacement screen off ebay for $100. It doesn't look all that difficult, but I want to make sure it's not harder than it seems to do a self-replacement.
Click to expand...
Click to collapse
Hi nvrnuff,
Opps, I didn't notice there is a replacment screen and already order a Eten M600. Can you please reply back yr end result if you will buy the replacement screen.

Hey nvrnuff,
Are U breaking the LCD (the display) or the DIGITIZER GLASSTOP(the touchscreen sensor) like me. I just found out they are 2 seperate things from http://forum.xda-developers.com/viewtopic.php?t=51395&highlight=lcd after research

Answering my own question:
Jack, it doesn't matter with the Jam. They're all one assembly. Even PPCtechs can't replace only one or the other on this device; they always replace the whole assembly, LCD and touchscreen both. But I know what you mean, and yes it is possible to have a working LCD and broken touch or vice versa.
Second, I recently replaced my Jam housing and found that the LCD/touchscreen assembly is remarkably easy to replace IF YOU FEEL COMFORTABLE WITH DISASSEMBLING THE JAM. For more information on that, read the "Jam housing" thread. I posted there about that whole process on page 3.

I want your broken wizard!

Please, its been about a month since the earpiece on my wizard died and i can't find the part anywhere! I found one damaged wizard on ebay which sold for $400 with a damaged screen! obviously a fradulent buyer but the seller hasn't replied yet.
So if your wizard is water damaged, smashed, or simply inoperable i need this one part to fix my earpiece. Also my brothers wizard's speakers are blown so it'd be great if i could get a hold of those two.
What i need is the ribbon cable which connected the main board to the top sliding half of the device. Its a ribbon cable attached to a circuit board on both ends.
Please i really need this so i can bring the phone part of my wizard back to life.
PM me if you know where i can get this part or if you have a damaged wizard.
Thanks in advance!

broken wizard!
i do have a working one with cracked screen. where are you located?

i should have mentioned that.. I'm in austin, texas. If u are over seas i can check to see if i can make it elligible for a corporate rate to ship it to me.
Also how much would u be wanted for it?

I'd offer you mine, but I got the same thing broken.

i just emailed 2 sellers on ebay which have cellphone parts and wizard housings in there stores, awaiting there reply. And i'm working something out with the one person with a damaged one from ebay.
What do you guys think $85 good for a wizard with a damaged screen?

broken wizard
I have a broken wizard--I dropped it, but I can still make calls from it via the bluetooth headset.
PM me if you are interested and I'll give you my phone #.

I've pm'd u, but does that mean your earpiece is broken as well? Cuz what i need is the ribbon cable that powers the earpiece, LCD, digitizer, softkeys, and everything else on the front half of the device. So if yours is broken then probably won't help mine out much.

i guess so. If you need an intact (front) then mine won't help--due to the fact that the "cal answer/hangup " buttons do not work.

The damaged one i bought off ebay came in today, swapped the parts out and now my earpiece is working again!! i'm so excited!!
Now i have all these parts lying around if anyone needs anything send them my way. The parts i got are:
The main board
Camera
Vibrator
Main housing (except for the front its really banged up)
Antenna
Keyboard
But no battery cover, didn't come with one.
Heres a pic of the mess i had on my desk but it all worked out perfectly
--------------------------------------------------------------------------------------------
I no longer have the damaged wizard so please don't PM asking for parts.

hey fone_fanatic, wondering if you ever experienced your Wizard creaking when you press down on the front faceplate(below the call/end buttons)....seems to come from the hinge right under the the right soft key (the one connected to the keyboard), only thing is it only makes noise when the keyboard is closed and my keyboard is not loose at all(nice and snug)....just wanted to know if you might know of a fix for my problem, would you recommend me taking it apart or just sending it in for a warranty repair or do you know if it is pretty easy to somehow shorten the gap between the front face and the keyboard?.... appreciate the time.
Regards,
P.S. My Wizard works fine, its just starting to get very annoying when I make/end phone calls.

no, mine doesn't make any noise when i press down there. well there is a noise but its coming from the battery cover. if your device is under warranty, i suggest sending it in if it bothers you that much. the reason being because when u open it up your bound to break a couple of clips which might make it worse.

fone_fanatic: I love that mess on your desk
You might want to mask out your First National Card though - edge detection filters would love that image...
V

don't worry about the card, its one of those advertisement cards you get in the mail syaing your pre-approved or whatever. i always keep those cards and use them with taking devices apart.

fro the broken units
check out this site they repair and sell repair parts
http://www.pocketpctechs.com/main~u...essories-Stylus+-+Enhanced~item~IMT-LCD03.htm

anyone got a 8125 with a cracked LCD but all other functions still working?

yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?

@ fone_fanatic
thanks for the advice....off to warranty it goes...hope it comes back with no new problems (fingers tightly crossed)....
Regards,

hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay

fone_fanatic said:
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
Click to expand...
Click to collapse
... wait for the next thing to break? :lol:

tonydt1g3r said:
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
Click to expand...
Click to collapse
The reason i bought it the this one with the damaged lcd is because i couldn't find the part i needed (Rigid Flex Board) anywhere so i swapped my broken one out with this one. So if i was to put this back together not only would the lcd be busted but the earpiece won't work also the speakers would be blown (sold good speakers to a friend). Also the front case is heavily scratched/dinged, looks like someone smashed a brick on the phone.

Changing a broken LCD screen on the universal

Hi!
I have been lurking around in this forum for quite some time, but I have been unable to find any information regarding how to disasamble the universal.
I have a broken screen, and I am thinking about buying a new lcd on ebay and try to replace the broken lcd.
I have tried to unscrew the six screws under the screen, but I am not able to open up and "get inside" to replace the lcd.
Are there any information aviable on how to do this, or even better an instruction on how to replace the lcd screen?
Thanks for any help and a great forum!

replacment screen
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.

HTC instructions
I have the pdf on how to dismantle and reassemble the HTC universal. Although I think it is in the FTP somewhere too.
BR
Wassa

itwasntme187 said:
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
Click to expand...
Click to collapse
itwasntme187: Thanks, I was about to buy from this guy, but found another one at ebay that was a little bit cheaper ($160 for a new LCD screen). I sent an order today, so I hope I have done the right thing trying to fix it my self.
wassa: Thanks for notifying me that there was a manual out there. I checked the ftp and found the manual on dismantle and reassemble the HTC universal.
Thanks for the help to both of you.

you can download it here. http://buzzdev.net/component/option...om_remository&Itemid=100&func=fileinfo&id=304

The replacement was a success.
I got the LCD from ebay on Monday and using the above mentioned manual I was able to replace my broken LCD screen. It is an easy job if you follow the instructions in the manual. There is only a total of 8 screws that has to be unscrewed to get the job done. Now if I was only able to get a replacement camera flash light my universal would be in an almost perfect condition.

glad you got everything working!

Hi, im a newbie here. I also broke the LCD screen on my Universal/Xda Exec.
How can I access the FTP site to download the instructions on how to replace the screen?
Many thanks for your help.

you can get a new screen + have it replaced for 40 quid. Basically HTC has an agreement with the carphone warehouse and offer a repair service with all parts included for 40 pounds (I'm using a bloody german keyboard so i can't type the pound sign). When i broke my screen (I was bump starting a car with it in my pocket) i thought damn, now i'm 100 odd quid out of pocket, so i was suspiciously surprised when it was only 40 pounds. The only drawback is it takes about 6 weeks. Maybei should have posted this last year when i had my screen replaced...

LCD Replacement instruction sought
Hi. Hope the person who provided the instruction is still around. I am another Universal user who needs to replace the screen as the digitizer has not been working properly.
Anybody could provide the instructions on how to replace the LCD screen please? As far as I know the Universal's LCD screen and digitizer are attached and could not be separated without (de)soldering. But providing that the digitizer itself costs much less than the whole LCD ($8 vs. $135), if anyone would please provide the instructions on how to replace the digitizer (on the same lcd screen), that would really be awesome!
Really I do not enjoy the idea of sending the unit away for 2 weeks with £100 expense.
Thank you very much in advance!

Since there are obviously people here who have done this before could someone maybe help me out?
My screen is intact, but I dropped my Universal a while ago and since then the 2-axis screen hinge seems a bit loose. Everything works ok, it's just that the cover with the screen in it are not as firmly attached to the base as they used to be.
Can this be fixed by taking the device apart and reassembling it (tightening some screws and so on) or would it be a waste of time?

Digitizer replacement

hey, i have scratched my digitizer panel and i was thinking of replacing mine with one from ebay for about £20, anyone any throughts on this, or instructions showing how hard or easy it is!!?? as the scratch is slightly annoying so im thinking replace it then get a screen protector fitted

http://www.pdacenter.ru/razborka/htc-touch-diamond2/
have a look here

i've broken mine (digitizer) and orange give me a "phone standart exange" (car we say it in english ??) for 130€ so i'll get a new phone with new warranty start date...

cheers for the diagram, i would have to kill mine as it i wouldnt have a door step exchange it would go off to the htc repair centre and they would see the hard spl etc, its no biggy for me to change the digitizer to be honest, just wish i wasnt so careless with it!!

I love how easy HTC phones are to dissasemble. I need to buy the front housing. I dropped my phone 5 times really bad while in Greece over the summer and the front bezel of my phone looks like it was in a war. The digitizer and all are still perfect. Just the bezel is dented, scratched, and chipped a lot.

New HD2 Display Case?

Hello guys,
today my hd2 fell on the floor and the display cracked. the lcd and touchscreen are still working fine, even in the area where its cracked.
Is there a chance just to replace only the plastic case on the lcd? Or do i have to completly renew it?
Thanks!

Nope, sorry.
There's no plastic display on the HTC, nor anything plastic. The LCD is soldered to the digitizer and normally both should be replaced. They cost around 100$, and the replacement is about 200$ in the HTC center. You do the math, it's the price for a sec hand HD2. Otherwise, you can buy and change the digitizer (costs around 50$). But this is a very delicate operation to do by our own -you have to cut the LCD from the cracked digitizer and do many other things. As someone have said for some other reason "it is an easy operation, but if you have no experience in soldering, do not try to learn it on your laptop motherboard". So, your choice is between repairing it in HTC for 200$ and "repairing" it some other service for 100$, with questionable quality and voiding your warranty.
As you may guess, I have walked that road already. My HD2 was 1 week old. After some sleepless nights (as I was wondering what to do AND because the "perfectly working cracked screen" had cut my fingers) I sold it 100-120€ under the second hand market price and found a new one. That's also my advice to you. I.e. the first one. The second one is to buy a silicon cover for your next HD2.
ingrdgrbl said:
Hello guys,
today my hd2 fell on the floor and the display cracked. the lcd and touchscreen are still working fine, even in the area where its cracked.
Is there a chance just to replace only the plastic case on the lcd? Or do i have to completly renew it?
Thanks!
Click to expand...
Click to collapse