Help I'm stuck at the white HTC splash - Wing, P4350 General

Hey,
I've tried to update my herald but after 1 hour still nothing happend.
After a while >> 1 hour i''ve soft reset the herald stil stuck at the 1st white HTC splash.
After a hard reset also stuck at the white HTC splash...
THere is also communication with USB ...
Has someone an idea (other then trashcan)..
gr

go to bootloader, flash RUU.

Thanks !!!

Related

Screen at strange colors UNI doesn't boot

I had my EXEC/uni stoped at the o2 boot image and freezed. so I used the varios methods here for updating the rom and the screen is with colors fuzzy colors , very strange ... so any one can help me please.
I can enter boot loader I dont know what rom I had... I am in Portugal so dont have O2 support
thanks
Have you successfully loaded the ROM even once?
I loaded the rom, then the congratulation screen apeared and I made the hard reset and the fuzzy colors apear... i am getting a little bit scared. it was working yesterday night and today.... freezed the boot.... i tried 3 difrent roms the qtek rom in the cd, in the webpage (my-xda), a rom from qtek in portuguese didnt work.
the light doesn't lit when I plug the wall charger... and I am affraid of use all the battery in the process of loading the roms...
I solved the problem installing the wm6 rom on it. and now it boots
me beri gapppy lol

help the wizard is dead after upgrading to new rom

hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!

Bricked wing?

Tried to upgrade to Touch flo and installation froze, now my phone wont boot past the white t-mobile screen, anything i can do?
Pureplaya851 said:
Tried to upgrade to Touch flo and installation froze, now my phone wont boot past the white t-mobile screen, anything i can do?
Click to expand...
Click to collapse
was your phone hardspl'd? did you read how to flash? is it a herald or wing?
What rom were you trying to flash? try to get into the bootloader mode and reflash the original rom, Use this link if its a WING http://forum.xda-developers.com/showthread.php?t=321717 , to get into bootloader softreset while holding down the camera button, it will come up to a colorful screen with ipl and spl information... While in this screen connect the device to the computer and reflash..
i tried that but i doesn't wrk on my phone for some reason. please help me!!!!!!
hard reset?

Trinity stuck in boot-loader mode after bad flashing , pls help

Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!

HTC Arte 100 stuck on logo

hi,
I am new here, and I am new to this model how could I fix this phone? Stuck on logo only it shows , I already hard reset the unit but still same problem. Can you guide me how to fix this? basic pls.. thanks
Stuck on logo only it shows IPL 1.12.0001, SPL 1.12.0000, GSM 02.67.90, OS 1.12.0.0
How did you break it?
it just suddenly break... solution for this?

Resources