Database Users

"Device Lock" to Softkey or Hardkey?

Hi!
Is it possible to get this today-plugin mapped to a soft- or hardkey? If not, does a similar app exists to unlock the device with 2 keystrokes?

???

There are a couple of apps out there that will lock the screen. ScreenLock is one of them - it requires you to press two buttons at once. Another is MortSaver. Just do a search on the usual PPC software sites for "lock".

warx said:
Hi!
Is it possible to get this today-plugin mapped to a soft- or hardkey? If not, does a similar app exists to unlock the device with 2 keystrokes?
Click to expand...
Click to collapse
Place the device lock Plug in at the top of your "Today" screen (must disable Date plugin). When you are in today screen, you can scroll (arrow down) one click and then click on the action button to lock device.

squeeze said:
warx said:
Hi!
Is it possible to get this today-plugin mapped to a soft- or hardkey? If not, does a similar app exists to unlock the device with 2 keystrokes?
Click to expand...
Click to collapse
Place the device lock Plug in at the top of your "Today" screen (must disable Date plugin). When you are in today screen, you can scroll (arrow down) one click and then click on the action button to lock device.
Click to expand...
Click to collapse
Genius lateral thinking. I like that. Well Done

Two new tools were released the last few days, the both use the built-in device lock. Have a look here:
http://forum.xda-developers.com/viewtopic.php?t=45953
and here:
http://forum.xda-developers.com/viewtopic.php?t=45851
Haven't yet figured out if I can also unlock without pulling out the stylus. Anyone know?
B

you can, but the plugin was designed for devices that have a full phone pad available when the screen is (e.g. smartphones, mostly); it uses the * key. You can use the same key on the wizard, but of course you have to slide out the keyboard for that

hehe, I already tried that and it's "a bit" inconvenient (considering that i also have to press the "blue dot" key to get the *)
But thanks for replying
B

THIS ONE works perfect!
http://www.mr2-power.com/downloads/DeviceLock.CAB
Just install it. Map it to a hardwarekey and there you go. I have it running on my MDA Vario and it works just perfect. One button push and the device is locked. You can even change settings ( just go to settings/system and you will see a new icon - Device Lock - )
Super little helper! This is a (IMHO) must-have-tool

DREAMBOXER said:
THIS ONE works perfect!
Click to expand...
Click to collapse
it's basically the one from 3 (now 4) posts up, no?
http://forum.xda-developers.com/viewtopic.php?t=45953

ZeBoxx said:
DREAMBOXER said:
THIS ONE works perfect!
Click to expand...
Click to collapse
it's basically the one from 3 (now 4) posts up, no?
http://forum.xda-developers.com/viewtopic.php?t=45953
Click to expand...
Click to collapse
you are correct in that this tool is great ! How do I map it to a key though...

1. Start > Settings > |Personal| > Buttons
2. Select a button from the list
3. Under "Assign a program:" pick "Device Lock"
done

I came across a problem when I try to uninstall the program. After a successful unintall, I simply soft resetted my device. When the deviced booted back up, I received an error message stating that it failed to start the Device Lock program and showed the path where it used to be installed.
I looked at all the locaitons where it might have left a trail but at the end, the error message would constantly show up and slow my device down.
I had to hard reset the device. Why does it do that ?

The program may have left a notification in the notification queue. Speak to Matt to check if the program removes this on uninstallation, or remove it manually with Memaid or SKTools.
My app can remove its own notification with the -remove command line.
But you should remove the notification before uninstallation to prevent the message.
V

Device Lock for Touch HD?

Is there a working version for a Device Lock for my beloved HD? I want my HD to be locked when a notification pops up or a phone call comes in. Actually its unlocked after a call or notification.....

Candy-men said:
Is there a working version for a Device Lock for my beloved HD? I want my HD to be locked when a notification pops up or a phone call comes in. Actually its unlocked after a call or notification.....
Click to expand...
Click to collapse
try S2u2.
Do a search - there are a few similar discussions!

i like the pocket shield on my touch hd -> http://pocketshield.netserver01.com/

I´ve tried S2U2 on my Wizard with some strange problems like Battery drain etc. Pocketshield works so far, but i loved the simplyness of DeviceLock.
Isn´t there any way to lock the device on wake up? Pocketshield shouldn´t be the last fix for this problem....

PocketShield is the best for the HD.

arturobandini said:
PocketShield is the best for the HD.
Click to expand...
Click to collapse
What version?

I´ve tryed aout Phoneshield, but i wasn´t that surprised of it. Now i´ve tryed This:
Goto registry:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 1]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 1]
That works for me without installing any Software

Candy-men said:
I´ve tryed aout Phoneshield, but i wasn´t that surprised of it. Now i´ve tryed This:
Goto registry:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 1]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 1]
That works for me without installing any Software
Click to expand...
Click to collapse
however doing this modification at registry can I answer to a call sliding to green the on screen indicator?
or am I forced to press phisical anser button?

The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....

and after....
Candy-men said:
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
Click to expand...
Click to collapse
and after how many time lock the device and can i eventually change (30 60)
thank'you

Candy-men said:
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
Click to expand...
Click to collapse
ah that's fine thx
I would to know one thing, I see two different key to lock the phone:
AutoDeviceLockEnable
LockLevel
why? isn't enough only one of them? for example backlight lockenable?
pls explain to me what exactly these 2 keys so

quick question :
which registry entry governs the backlight display on the lock screen,
at the moment i've got the phone dimming after 30 seconds, then it locks and the light comes back on. for about 30 seconds. ideal the lock screen would be illuminated for about 10 seconds then blank the screen.
What reg entries do i need to set to sort this out ?
answers appreciated.
many thanks.

Hi,
HTC End Key is included, hold End Key 3 seconds an device locked.
wfg
starbase64

Candy-men said:
I´ve tried S2U2 on my Wizard with some strange problems like Battery drain etc. Pocketshield works so far, but i loved the simplyness of DeviceLock.
Isn´t there any way to lock the device on wake up? Pocketshield shouldn´t be the last fix for this problem....
Click to expand...
Click to collapse
am I missing a trick here, doesn't pressing the 'end call' button lock your phone with out the need to install extra software ????

Jezwick said:
am I missing a trick here, doesn't pressing the 'end call' button lock your phone with out the need to install extra software ????
Click to expand...
Click to collapse
by default yes, but you can amend the function of the long key press if you like via the buttons menu in further options.
i've got mine killing off connections data/phone, for example with the power button at the top locking the phone.
works for me.

Hi!
I'm still struggeling to find the right way to lock the phone. The ideal solution would be to:
1) Have the phone unlocked when I switch it on with the Power button (so that I can immediately use it after deliberately turning it on)
2) Have the phone automatically locked when it wakes up due to a phone call or SMS (so that I don't press anything by accident when it is in my pocket).
This seems to be the only really logical way to use device lock. Can this be done?
Regards!

But PocketShield doesn not meet my requirements (see above post). It's just another regular device lock app without the possibility to disable the device lock when the unit is turned on with the power button.
Regards!

I found the Registry-Hack Solution is the better way, just my opinion. But can somebody tell me which reg-value must be edited to avoid locking with end-call button? I don´t want to lock my device in this way, i want to end Data connections with long pressed end-key.

easy
1) scroll along to settings
2) hit 'all settings'
3) select 'personal' tab
4) select 'buttons' icon (top left)
5) get your stylus out
6) on the buttons screen, hit the arrow on the bottom right until you can see the "end key" section. hit that.
7) in the options listed, select "automatically execute selected action" and underneath this select " terminate data connection"
8) hit the OK button (top right) and bob your dads brother, you can now terminate data calls via the long press call cancel key.
nice one.

Thx for that.....

lock screen missing

hi all...
the lock screen on my hd2 has gone missing... pressing the red button directly brings me into the sense UI... any suggestions what went wrong?
thanks!

any help with above issue pls?

Have you recently installed then uninstalled a custom lockscreen? Look at my sticky (link in my sig) and towards the bottom of the first post you'll see some attached cabs. download the one that says Lockscreen HD2 original then install it. It should bring you back to normal.

ddgarcia05 said:
Have you recently installed then uninstalled a custom lockscreen? Look at my sticky (link in my sig) and towards the bottom of the first post you'll see some attached cabs. download the one that says Lockscreen HD2 original then install it. It should bring you back to normal.
Click to expand...
Click to collapse
hi there...
i did stumble upon your sticky and downloaded the lockscreen HD2 original cab file yesterday itself. I have soft reset the device after the installation but still there is no lock screen. Once the device boots up its directly in the Sense UI. Anything else I can do to fix OR might have done wrong?
Thanks for your input!
** Also, to answer your question, no i have not installed or uninstalled any custom lockscreen.. I am still in the learning stages of flashing a ROM and once I get comfortable with all the steps involved, I'll take the plunge but at this point the device is in stock condition except for the apps I have installed. Thanks

morphosin said:
hi there...
i did stumble upon your sticky and downloaded the lockscreen HD2 original cab file yesterday itself. I have soft reset the device after the installation but still there is no lock screen. Once the device boots up its directly in the Sense UI. Anything else I can do to fix OR might have done wrong?
Thanks for your input!
** Also, to answer your question, no i have not installed or uninstalled any custom lockscreen.. I am still in the learning stages of flashing a ROM and once I get comfortable with all the steps involved, I'll take the plunge but at this point the device is in stock condition except for the apps I have installed. Thanks
Click to expand...
Click to collapse
Maybe something here will help. did you install Bsb Tweaks, also try installing the lockscreen cab to device.
http://forum.xda-developers.com/showthread.php?t=658884&highlight=lockscreen

ddgarcia05 said:
Maybe something here will help. did you install Bsb Tweaks, also try installing the lockscreen cab to device.
http://forum.xda-developers.com/showthread.php?t=658884&highlight=lockscreen
Click to expand...
Click to collapse
Thanks for the link - it kind of helped, which is to say - when i go to start menu and tap on "lock" it does lock the screen but after unlocking it when i press the red button to shut the display and again press it the lockscreen doesnt come up.. i'd hate to click twice before I press the red button only to make sure it doesnt come to life and call my aunt while in my pocket :-/
I tried reinstalling the cab from your sticky to the device (coz I wasnt sure where i had installed it previously) but the problem persists and No I havent installed any BSB or any other tweaks (atleast not intentionally)

So when you go to start , etc, then lock, after you unlock it you're presented with the lock screen Options. Are those set accordingly? Once set, it'll ask you to save changes, then click ok in top right corner.

jimbonics said:
So when you go to start , etc, then lock, after you unlock it you're presented with the lock screen Options. Are those set accordingly? Once set, it'll ask you to save changes, then click ok in top right corner.
Click to expand...
Click to collapse
Okay so here's what I do -
- tap on start menu
- bottom left soft key says "lock"
- tap on lock
- device lockscreen comes on
- now if i press the red button to switch off and then press it again, the lockscreen stays.
-but if i slide the lock on the lockscreen to reveal the sense UI, close the device and then switch it on again, it doesnt show me the lockscreen
does that help you help me?
thanks a ton for your patience!

morphosin said:
Okay so here's what I do -
- tap on start menu
- bottom left soft key says "lock"
- tap on lock
- device lockscreen comes on
- now if i press the red button to switch off and then press it again, the lockscreen stays.
-but if i slide the lock on the lockscreen to reveal the sense UI, close the device and then switch it on again, it doesnt show me the lockscreen
does that help you help me?
thanks a ton for your patience!
Click to expand...
Click to collapse
Do you have cookies home tab/chteditor or bsb tweaks installed? If you do that might be causing the fail.

ddgarcia05 said:
Do you have cookies home tab/chteditor or bsb tweaks installed? If you do that might be causing the fail.
Click to expand...
Click to collapse
No I dont. I dont have any of those installed. I want to install the cookies but havent installed any mods yet. The only things I've installed on there are apps.
One of them being Resco Explorer which has a Task manager with it. Could that have made my screen disappear?

morphosin said:
No I dont. I dont have any of those installed. I want to install the cookies but havent installed any mods yet. The only things I've installed on there are apps.
One of them being Resco Explorer which has a Task manager with it. Could that have made my screen disappear?
Click to expand...
Click to collapse
I don't think Resco Task Manager is the problem. I have it installed, and I still have the Lock screen that displays when I hit the red key.

brucegil said:
I don't think Resco Task Manager is the problem. I have it installed, and I still have the Lock screen that displays when I hit the red key.
Click to expand...
Click to collapse
Thanks for the input. Any other checks from anybody as to how can i solve this problem? I really dont wanna find refuge in hard reset... its kinda pain in the we know where to setup all the accounts n stuff
thanks

morphosin said:
Okay so here's what I do -
- tap on start menu
- bottom left soft key says "lock"
- tap on lock
- device lockscreen comes on
- now if i press the red button to switch off and then press it again, the lockscreen stays.
-but if i slide the lock on the lockscreen to reveal the sense UI, close the device and then switch it on again, it doesnt show me the lockscreen
does that help you help me?
thanks a ton for your patience!
Click to expand...
Click to collapse
Listen...
Once you go to the start menu, select SETTINGS. Then tap the MENU soft key in the bottom right and select ALL SETTINGS. You should see LOCK in the top-right. Tap it, this locks your screen. Immediately unlock. You are now at the LOCKSCREEN OPTIONS page. Set accordingly. Save. Tap OK in top right. Done. Drink a beer.

jimbonics said:
Listen...
Once you go to the start menu, select SETTINGS. Then tap the MENU soft key in the bottom right and select ALL SETTINGS. You should see LOCK in the top-right. Tap it, this locks your screen. Immediately unlock. You are now at the LOCKSCREEN OPTIONS page. Set accordingly. Save. Tap OK in top right. Done. Drink a beer.
Click to expand...
Click to collapse
I already tried this before.. Tapping on the Lock icon in the "ALL SETTINGS" does not lock the screen. Instead, it directly takes me to the password screen (maybe what you referred to as lockscreen options) where my first choice is a checkbox for "Prompt if phone unused for ___ mins and the other option is to choose a password.

Yeah that's the stuff. That's where you enable it. Check the box, set the password (pin).
Sorry for not realizing you had been there. If setting and saving those options doesn't work, not sure what to tell you.
Are you connected to an exchange server?
(you have to make sure after you hit the obvious SAVE button that pops up, you have to hit the OK button in the top right the screen.)

jimbonics said:
Yeah that's the stuff. That's where you enable it. Check the box, set the password (pin).
Sorry for not realizing you had been there. If setting and saving those options doesn't work, not sure what to tell you.
Are you connected to an exchange server?
(you have to make sure after you hit the obvious SAVE button that pops up, you have to hit the OK button in the top right the screen.)
Click to expand...
Click to collapse
Thanks for all the help ya'll
The problem wasnt gettin resolved so finally i hard reset, well actually i was plannin on flashing with a new ROM so did that... got the chuckyROM on there now... rocks!!
Thanks again

edited cuz of mistaken

HELP, cant use keypad while on call

The problem is very isolated because when i answer or make a call the touch screen then becomes useless....i can't hold, turn on the speaker phone, switch calls, or x out off the phone tab. There have been some moments when it would work but if i tried another call it would stop working again. if someone could help me fix this issue it would be greatly appreciated.

turn off the 'increased tap time' tweak in BSBtweaks. (or uninstall the 'tap time' cab if you did it as a standalone tweak.)

samsamuel said:
turn off the 'increased tap time' tweak in BSBtweaks. (or uninstall the 'tap time' cab if you did it as a standalone tweak.)
Click to expand...
Click to collapse
+1..it happen to awhile back..

try swyping across the word keypad dont push it, says it in the manual i didnt read it either someone had to tell me

End call at black screen

I know im not the only one who has this issue...If im on a call and have a black screen the want to hang up, more often than not I find myself waiving my phone around or trying to find a button that will wake up the screen so I can end the call. anyone have a quick way to get this done? thanks.

just move the screen away from your head and the screen should light up
If it doesn't return phone to stock with odin then take it into sprint and tell them you want it fixed (If you have insurance)

its normally when im on speakerphone and have my phone on a table or center console

I have some icon on my screen that I can't get off... Can you help?"?????D?SD

OO then try changing your "screen timeout"
Settings---> Display--->Screen timeout
try setting it a little higher so it wouldn't turn off

azyouthinkeyeiz said:
I have some icon on my screen that I can't get off... Can you help?"?????D?SD
Click to expand...
Click to collapse
Can you describe the icon ?

iSaint said:
Can you describe the icon ?
Click to expand...
Click to collapse
Sorry It was tongue in cheek...
Just implying, that we can't help out unless we are given some more info... :\
Ie... OP.... What is the rom you are running, what kernel have you flashed, what add ons have you messed around with, what themes have you tried, etc...

azyouthinkeyeiz said:
Sorry It was tongue in cheek...
Just implying, that we can't help out unless we are given some more info...\
Ie... OP.... what is the rom are you on, what kernel have you flashed, what add ons have you messed around with, what themes have you tried, etc...
Click to expand...
Click to collapse
Ugh i never get those kinds of jokes 8(
i am to stupid

iSaint said:
i am to stupid
Click to expand...
Click to collapse
Hey! Don't say that! It's only true if you believe it to be! lol..
BTW.. I love your signature...
OP.. Try waving your finger over the top portion of the housing above the screen and see if it is your screen protector messing with the proximity sensor by lifting the corner to give it unobstructed access to light..... That is a pretty common issue...

Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".

Koadic said:
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Click to expand...
Click to collapse
the only problem with this is if you're on a call that you need to press numbers on (like press 1 for english, 2 for spanish, etc).
the only way I know to wake up the screen when on speaker is the power button so for that reason only, I'd advise against this. I say just tap the power button and be on your way.

Koadic said:
Another option is to enable ending the call with the power key (assuming your on 2.2)... This way, even if the screen is unlit, a simple press of the power key will disconnect the call.
To enable this option, hit Menu->Settings->Accessibility->(if you get a popup saying "No accessibility applications found", just hit cancel)->then toggle the box next to "The power key ends calls".
Click to expand...
Click to collapse
PERFECT! Thats just what I needed