Related
Hey all,
i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.
i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
try any of this three cab see which one will work for you
MMS
I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.
I have to soft-reset to get out of it as "Cancel" does not work.
Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ
I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toenailed,
Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?
Thanks
Sending is work perfectly, but the receive...
pixar 4
hello to all
i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error
i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc
help needed
thanks
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toe,
Could you post your settings for Pixer4?
My settings are below and I cant seem to send nor receive..
Thanks..
hi jenellej.. just run the GPRS cab ..
under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings
for sun
"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"
for GLobe
"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"
for Smart
"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"
i already try the GLOBE and SUN .. but i havent try it with SMART yet
one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..
PS Dont install also ArcSoft MMS COmposer
I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!
still doenst work
can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol
gateway 213.30.27.63
url http://mms/servlets/mms
port 9201
After sending--- device Hang
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Re: After sending--- device Hang
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
for SMART (philippines):
here's the settings for Pixer..
Start/Settings/Connections/Connections
Click Advanced Tab, choose Select Networks
Under "Programs that automatically connect to the Internet should connect using:", click new.
Under General Tab:
Enter a name for these settings: Smart MMS
Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.
Access point name: mms
Click Next then Finish.
NOw open Pixer4.
Tap Options/Preferences/Advanced.
Wap Gateway IP Address:
10.102.61.46
MMS URL:
http://10.102.61.238:8002
Service:
Smart MMS
Click OK, check "Get Message Immediately" then OK.
for GLOBE and SUN settings, refer to toenailed's post above.
i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:
I can send using Pixer4 on the Orange network. Not sure about receiving yet.
My Pixer4 settings:
Wap Gateway IP Address:
192.168.224.10
MMS URL:
http://mms.orange.co.uk
Service:
Orange MMS
works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:
How abaut EzWAP MMS
i'm not try it yet but i thought it work.... :roll:
Re: After sending--- device Hang
mariolouis said:
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
Click to expand...
Click to collapse
mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!
try this MMS Composser
this two cab must instaled
Re: try this MMS Composser
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Re: try this MMS Composser
jenellej said:
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Click to expand...
Click to collapse
Arcsoft MMS Composer 1.6
Hello,
How do I turn GPRS OFF On an Xda Exec?
I have a successful WiFi connection set up to my Works Netork and I want to browse the internet via that. However, GPRS just will not GO AWAY & keeps on insisting that IT rather what I WANT is the route to the internet.
Hence I want it gone, nada, no more.
I can safely say that I will NEVER browse the net using GPRS or poxy WAP sites - excessively expensive crapola!
Thanks in advance,
Andy
i have same problem , plz help
sakinah said:
i have same problem , plz help
Click to expand...
Click to collapse
and me! been searching but no luck yet!
not sure about 2005 but with 2003 i can just choose which connection i wanna use in connection->advanced
If you never going to use GPRS, just delete the settings:
Settings->Connections->Connections, under My ISP choose 'Manage existing connections', then long click on the GPRS setting (not sure what the name in your case will be, but it is probably the only one there) then choose delete.
You are now safe from GPRS charges.
levenum said:
If you never going to use GPRS, just delete the settings:
Settings->Connections->Connections, under My ISP choose 'Manage existing connections', then long click on the GPRS setting (not sure what the name in your case will be, but it is probably the only one there) then choose delete.
You are now safe from GPRS charges.
Click to expand...
Click to collapse
there is not option to delete?
It is possible that on your phone the connection is set up under 'My work network', try checking there. Somewhere there should be a connection with your GPRS settings and you should be able to delete it.
i must be going blind, there is no option to delete, just edit or add
You are not going blind.
On the dialog it self there are two buttons 'Edit' and 'New'.
But if you tap and hold the connection it self (see little circles) you get a pop-up menu saying 'Delete' and 'Connect'.
It works on my Jamin, and it should work for you.
levenum said:
You are not going blind.
On the dialog it self there are two buttons 'Edit' and 'New'.
But if you tap and hold the connection it self (see little circles) you get a pop-up menu saying 'Delete' and 'Connect'.
It works on my Jamin, and it should work for you.
Click to expand...
Click to collapse
aaahhh now youre talking! ok i'll give that a go ta
oh bugger, ok thats worked BUT i thinki deleted my phone settings as now it cant find the network for calls, pratt, anyone got the setting so i can ut them back in, i dint reallt want to reset it after i got everything else working!
got it working now! ta
Same problem here, however I would like to use GPRS occasionally, so do not really want to delete the setting.
Example whilst at home, I want to use wi-fi, on the road GPRS.
Is there any tools that can turn GPRS on and off ?
Just press the E or G icon on the top bar and you should have the option to disconnect. That is, if you've enabled GPRS Disconnect in your registry. Works like a charm. Whenever I want to connect via WiFi, I just disconnect GPRS and fire up WiFi...
Hi Guys!
just a quick question... How to send an MMS? And what to do to receive one?
I can't receive any MMS (I haven't been using them for ages, don't need them) but now some1 have to send me an MMS and...
It looks like I've all those settings, my simcard is activated etc- but i can't even see an option to compose one...
What I'm doing wrong then?
Cheers
Chris
columb said:
Hi Guys!
just a quick question... How to send an MMS? And what to do to receive one?
I can't receive any MMS (I haven't been using them for ages, don't need them) but now some1 have to send me an MMS and...
It looks like I've all those settings, my simcard is activated etc- but i can't even see an option to compose one...
What I'm doing wrong then?
Cheers
Chris
Click to expand...
Click to collapse
you need to install you service provider mms settings into the device.
Thanks for your reply- unfortunately is not any helpful. I should mention that I'm using o2 rom with o2 settings. I can see those settings...
Cheers
Chris
Hi Guys!
If you can send/receive MMSes can you please tell how to send one?
What should I have in my menus? And why I can see all those settings but can't send?
Cheers Guys!
Ok, what I've tried next:
1. checking MMS settings (yes, they are in MENU)
2. taking a picture and tried to send this picture as a MMS (didn't work twice, Exec has just hang)
3. found http://forum.xda-developers.com/showthread.php?t=261852&highlight=o2+settings and tried to applay those settings one more time. No joy...
Strange thing is that I don't have MMS folder but I do have MMS settings
Any other ideas? I really need MMSes (like never before, I'm heavy user but just calls and GPRS/WIFi- no texts (10-20/mth) or MMSes (5 in my whole life or even less)
Cheers
Chris
Edited 19/12/06
I'm so sorry for all those stupid grammatical mistakes I was sooo tiered last night and really fed up with MS and their ideas how to improve our lives...
T-Mobile MMS Settings?
Originally, I wrote:
I have a similar problem with my Jasjar and T-Mobile (USA): MMS messages just sit there, and occasionally I get a notification that they couldn't be sent...? My Jasjar was purchased independently and is unlocked. Is there some T-Mobile USA file I need to upload to the device? And can I do it via my Mac and Missing Sync?
Click to expand...
Click to collapse
Well, I uploaded a T-Mobile settings file which I had downloaded from i-mate, et voilá! I was able to send MMSes. It also (when I choose to disconnect from the GPRS network) restored the G-in-a-square that had become dashed two-way arrows. Unfortunately, there's still something interfering with syncing with my Mac via Missing Sync for Windows Mobile.... Thanks! Cheers,
Has either one of you tried to contact your provider and actually ask them to help you with the settings? I mean really, CALL customer service and have them either walk you through it, or get the settings and we'll help you input them if it comes to that.
Hi,
No, I havn't. The reason is that I do have:
- VGA hack (OZ)
- load of programs (which shouldn't affect anyway MMS as they are not affecting emails and texts)
- I've done full backup + restore using SPB backup tool (from older ROM to newer, as my phone went for service)
Now I going to do hard reset.
I just have to create list of installed programs, prepare them etc.
I've even installed windows
Anyway, it looks like something is going on with MMSes...
Cheers
Chris
None of the things you mentioned can be used as an excuse for not calling your provider of the settings:
a. OzVGA has a nice little button which will allow you to boot in normal mode.
b. Nothing to do with MMS
c. That might be a problem altogether, it's generally not recommended restoring on newer ROM.
joannaex said:
None of the things you mentioned can be used as an excuse for not calling your provider of the settings:
a. OzVGA has a nice little button which will allow you to boot in normal mode.
b. Nothing to do with MMS
c. That might be a problem altogether, it's generally not recommended restoring on newer ROM.
Click to expand...
Click to collapse
Oh, yeah,
I do agree. As I've said only my backup could mess up with settings...
Will try to call O2 HD tomorrow
Thanks for your advice!
Cheers
Chris.
joannaex said:
Has either one of you tried to contact your provider and actually ask them to help you with the settings? I mean really, CALL customer service and have them either walk you through it, or get the settings and we'll help you input them if it comes to that.
Click to expand...
Click to collapse
Yeah...no joy. Doesn't work, and they don't know why. Cheers,
Uploading a T-Mobile configuration file obtained from i-mate resolved this issue.
Here are vthe MMS and Internet settings sent to me from Voda UK
MMS:
Click Start
Click Messaging
Click Menu
Click MMS Configuration
Click on the Servers tab
Click New
At Server Name enter a new name for the profile.g. Vodafone MMS
At Gateway enter Menu
At Port Number enter 8799
At Server Address: enter after the http:// mms.vodafone.co.uk/servlets/mms
At Connect Via click on the Arrow down to and click on the GPRS connection you created i.e. Vodafone GPRS
Scroll down
At Sending size limitation click on the Arrow down to and select 100K
At WAP Version click on the Arrow down icon and select WAP 2.0
INTERNET:
1. Click Start
2. Click Settings
3. Click Connections tab
4. Click Connections
5. Click Manage existing connections under the Internet / ISP section or WAP heading
6. Click New
7. At Enter a name for the connection enter a new name i.e. Vodafone Intranet
8. At Select a modem click on the down arrow and select Cellular Line (GPRS), Cellular Line (GPRS, 3G) for v1605
9. Click Next
10. At Access point name enter
for Contract: Internet
for PayT: pp.vodafone.co.uk
11. Click Next
12. At User name enter web
13. At Password enter web
14. Click Finish
regards Jonnie 16
Hello,
I have 2 issues with my universal.
1.) I cannot send or recieve multimedia messages. Can someone help me with this and give me the settings.
2.) I have an internet problem. I can sign on anf when I try to open a page it goes throught the connecting and locating stages fine, but gets stuck on the opening stage.
Thanks in advance
both depend on your operator, if you are european then this program that htc distribute for the trinity will help
http://www.europe.htc.com/support/software/htcp3600.html
The 3rd 'Download Software' Button
I'm american. Is there anything I can do?
you could tell me your operator, then i can get the settings for you
just a tip, check the first post you make next time instead of posting 2 more...
Tmobile is my operator.
After I posted it the first time i refreshed the thread page and I didn't see it so i posted it again sorry about that.
http://tmobileus.wdsglobal.com/mms?...mobileNumber=&captchaEnabled=true&service=mms
thank you so much. Will this fix my Internet to?
if you do both parts yes
franklinromeo said:
I'm american. Is there anything I can do?
Click to expand...
Click to collapse
About being american? Unfortunately, no.
captainsensible2002 said:
About being american? Unfortunately, no.
Click to expand...
Click to collapse
ROFL QFT ^^
Well I've done both settings completely. I still have problems though. I tried to open an internet page and it srill keeps saying open. The phone doesn't freeze or anything it just keeps saying opening. And when I tried erecieving apicture message it just says Downlaoding:0%. And I also can't sen. I noticed those are for the mda also and they aren't exactly the same with connections. Might that be the problem?
Well I managed to fix my mms messages with this link
http://www.pdaphonehome.com/forums/...0/41141-pda2k-t-mobile-gprs-mms-settings.html
I still need help with the internet though. Anyhelp is greatly appreciated. Also, with the sttings I got form the site, does t5hat mean UI can only browse wap pages and not www?
Anyone still there
Anyone still here?
franklinromeo said:
Anyone still here?
Click to expand...
Click to collapse
Yeah, but I can't help; I've NEVER been able to get MMS working on my i-mate Jasjar (WM5), despite coaching from T-Mobile and following all the links here. It connects via GPRS to T-Mobile, but it won't send or receive an MMS! Sorry. Cheers,
Midget_1990 said:
you could tell me your operator, then i can get the settings for you
just a tip, check the first post you make next time instead of posting 2 more...
Click to expand...
Click to collapse
Hi.
I am in south africa. My operator is MTN, do you have a solution?
Thanks
PMan
Hi.
I have the same problem. My network is MTN in South Africa.
Can anybody help.
Thanks in advance
Pman
franklinromeo said:
Well I've done both settings completely. I still have problems though. I tried to open an internet page and it srill keeps saying open. The phone doesn't freeze or anything it just keeps saying opening. And when I tried erecieving apicture message it just says Downlaoding:0%. And I also can't sen. I noticed those are for the mda also and they aren't exactly the same with connections. Might that be the problem?
Click to expand...
Click to collapse
I'm using T-Mobile. Although in the Netherlands.
I had to use "internet" as the accesspoint name (step 9 in that data account step by step instruction), but I guess that's just different for the US. I also had to use CHAP authentication in the GPRS settings instead of PAP.
BTW I saw another step by step and this seems to be for internet connections rather than wap connections:
Use Your Phone As A Modem
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile GPRS.
Enter T-MobileInternet in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter internet2.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
The new Internet profile is now configured and ready for use.
SOLVED! With screenshots!
I said above I couldn't help, but in the meantime, I've solved my own problems and posted the screenshots and procedures, which I hope might help you. Here's the solution with screenshots!
Basically: first, revise the T-Mobile USA procedures to eliminate any leading zeroes in IP addresses (e.g. change "...050..." to "...50..."), and second, after making your changes, be sure to power off the device (briefly press the power button and release), and then repower it. Hope this helps! Cheers,
how can i get messanger to run off Wifiand not data connection when i log on. please help
You need to reflash your phone with generic firmware
http://forum.xda-developers.com/showthread.php?t=466404
I used the XA firmware, being American, it makes they keyboard map to $ and not £... trying to find a fix for that though...
Thanks but that wont be useful being in uk if u find a fix let me know.
PaulW21781 said:
You need to reflash your phone with generic firmware
http://forum.xda-developers.com/showthread.php?t=466404
I used the XA firmware, being American, it makes they keyboard map to $ and not £... trying to find a fix for that though...
Click to expand...
Click to collapse
sorry but thats not true!!!!
i guess u have a vodafone branded phone right?
there is a threadhere in the xperia forum somewhere.
just install this cab here (works with the vodafone branding at least)
scotty180 said:
Thanks but that wont be useful being in uk if u find a fix let me know.
Click to expand...
Click to collapse
I'm in the UK and can live with it... takes like 3 extra clicks just to find the £ sign...
thanks
ok will try it and let you know
I have flashed my phone with a generic rom (from Vodafone). If I install the WLAN fix cab, will it work? i.e. give me WLAN access for messenger? cos I dont want to screw any of my current settings up! On another point, will it give me WLAN access to emails etc?
Regards,
Alan
it did for me.
it will screw up ur settings a little bit. at least it will set another default connection for internet apps (my isp). but u can easily set it back to the old one.
then it used Wifi if its available. if not it did a GPRS connection for me. no matter what app i used.
nalab1 said:
I have flashed my phone with a generic rom (from Vodafone).
Click to expand...
Click to collapse
Either the phone still has the default Vodafone ROM (in which you can't use Live on Wifi) or you have installed a new generic ROM (which can use Wifi).
If I install the WLAN fix cab, will it work? i.e. give me WLAN access for messenger? cos I dont want to screw any of my current settings up! On another point, will it give me WLAN access to emails etc?
Click to expand...
Click to collapse
The WLAN fix is just a load of registry setting changes, however it's for German Vodafone phone, so you will need to edit the APNs back to the UK ones.
artesea said:
The WLAN fix is just a load of registry setting changes, however it's for German Vodafone phone, so you will need to edit the APNs back to the UK ones.
Click to expand...
Click to collapse
Help doing that???
scotty180 said:
ok will try it and let you know
Click to expand...
Click to collapse
Installed and worked but now i have no data connection all i get is wifi onnections.
scotty180 said:
Installed and worked but now i have no data connection all i get is wifi onnections.
Click to expand...
Click to collapse
like i said.
go to connections-> connections and hit the advanced tab and set ur old default connection for Internet apps.
Any idea what to put in to get my default please
I have the opposite problem. I can only connect to MSN over Wi-fi and not with the data connection. I'm on T-mobile but have a sim free uk X1. How can i get the messenger to connect when connected to t-mobile internet? I have web'n'walk included and msn not working defeats the object of why i got it! The opera browser works fine with the data connection... Please help! Thanks in advance.
achmed20 said:
like i said.
go to connections-> connections and hit the advanced tab and set ur old default connection for Internet apps.
Click to expand...
Click to collapse
nope not working. The new settings are being saved, but it still connects to the other data connection.
got gprs working again... msn still refuses to work though.