my mda vario screen appears to be broken. Things on display fades off and it looks like the "ink" inside the screen is on one side. Also when am holding it vertically and displaying contact list...everything on the screen shakes.
I dont know if there is a fix for this and if there are store who can fix mda varios? I believe i might need a new screen. So, why can i get one and is it something very easy to fix? Or better still who fix mda vario in uk here? Thanks.
PS
I cant send it back to tmobile, it is past warranty.
try going to this place they fixed mind for £130 ish i think
http://www.posltd.com
Related
I brought CHT9000 at July 2006 and O2 Trion at August 2006. Both have disalignment problem. At first I thought it is ROM problem and happened for certain model and S/N only.
I try 4 ROMs : I-Mate, Dopod ENG ROM, TyTN and New CHT (Taiwan) ROM.
I installed these ROMs and without installed 3rd parties software. Also I proceed all necessory method to prevent this problem happen such as set a false exchange server for activesync and unclick USB to PC (Check my post).
http://forum.xda-developers.com/viewtopic.php?t=58633
However, all of them have this fuxking disalignment problem. :twisted:
It is hardware problem and I have 2 possible methods to produce this disalignment happen to your TyTN:
1. Body Heat. i.e. Charging, Surf internet and Long talk.
2. Apply very little pressure on LCD. i.e. Cleaning your LCD Panel.
You will find this fxcking disalignment happen again. If you encounter this problem, don't realign the screen manually. Wait few mintues and you will found that it will re-align again. Now you can re-align the screen manually this time.
I already sold my device and not recommend anyone to buy it. It seems that HTC cannot solve this problem and perhaps they don't know the causes.
If you want to buy it, please wait. :wink:
If you brought it, good luck and godspeed.
i have sent mine back because of it
This is the HTC official answer to my request:
Good Afternoon,
There are now procedures in place for fixing the screen alignment issue with the TyTN devices. This is a hardware issue that we have identified and we are offering a replacement to owners of affected devices with two conditions.
1: The device must be returned with all accompanying accessories.
Everything that was in the box when you bought the device must be in the box when you return it.
2: The device must be a Genuine HTC Badged device. This means that the device cannot be a Vodafone v1605, an O2 XDA Trion, a T-Mobile Vario II or any other device based on the TyTN, but that is not actually a TyTN. For these devices, you must contact the Network/Reseller for further advice on this issue.
If you meet these two provisions, you may contact your nearest repair centre to arrange the swap. Please place everything back into the original box and arrange to have the device picked up. It will then be tested to confirm that it has the problem, and then it will be swapped for a replacement unit.
If you are unable to return everything, you will be eligible for a repair under the warranty. For this also, you can contact your nearest repair centre to arrange this.
:roll:
Cheers
Mine goes back Tuesday hopefully the replacement unit will not have the same issue.
There are people who fixed their issue by ROM Upgrade. There are people who just bought their Hermes got this problem. Some has SN HT63XXX. There also some people who been swap their units, and the issue came back.
Well, as I see it, HTC does not know how to fix this issue 100% since it is also happening on some Dopod 838, 8125 (models with sliding keyboard).
I will upgrade my Trion this weekend, and if this issue persists... I will sell this baby and reactivate my trusty Universal.
:lol:
A colleague was able to fix the problem by untightening the two screws on the back of the display and retightening them (not quite as tight as before). His device works without screen alignment problems ever since.
It seems that the screws are too tight which causes tension on the LCD resulting in screen alignment problems.
Magnet Theory
A friend of mine with CHT Dopod 9000, did this and fix his alignment issue.
"When Slide the keyboard, there's a magnet that activates the landscape mode. It's in the back of the screen when you slide it. ( I tried to put it near a magnet and the lanscape activates!)
Then I put a tape at the back of the small protruding (hunchback) just enough to be able to slide it close. This will decrease the magnetism receive from the main body when is close. Then for a week, it's good than before that I need to align 5x a day."
I know this true, since I met him and check his device. I even tried to massage his display, or run it hot.
I will try it myself... let u posted...
The problem only started for me after I installed a screen protector (Martin Fields, an excellent choice!), and since then I've had to re-align the screen every day. This morning I tried the screw trick, so I'll report back if it works for me.
Also I should point out that I have an MDA Vario II, so it looks like those of us who waited are no better off.
The next problem I have to deal with is an unresponsive 'C' key on my keyboard... :wink:
alignment issue is SW or HW or Both...
But unresponsive key(s) is really a HW, my first one has the "L" and backspace.. and it always like that, try to press it fast and it will not register all unlike the rest.
goodluck to all of us!!
:wink:
Anyone that has sent their TyTN back in for repair/replacement for the screen crapalignment, please report back when you get your TyTN back. I want to know if it's worth making the effort to get mine replaced, seeing as I live in Australia and I don't exactly have HTC repair centres, mainly on account of that they don't sell this here. BUT if it's worth getting it repaired/replaced, i'll try to make arrangements with my ebay seller and/or some overseas repairing people.
Cheers guys,
~Louis x_.
Re: Magnet Theory
sectorlord said:
A friend of mine with CHT Dopod 9000, did this and fix his alignment issue.
"When Slide the keyboard, there's a magnet that activates the landscape mode. It's in the back of the screen when you slide it. ( I tried to put it near a magnet and the lanscape activates!)
Then I put a tape at the back of the small protruding (hunchback) just enough to be able to slide it close. This will decrease the magnetism receive from the main body when is close. Then for a week, it's good than before that I need to align 5x a day."
I know this true, since I met him and check his device. I even tried to massage his display, or run it hot.
I will try it myself... let u posted...
Click to expand...
Click to collapse
really ? I will try. Thanks
Tried, fermin's method seems to work！Thanks！
just cracked the screen on my 02 orbit when my daughter sat on it, definately the screen as the screen has a crack line along it and only lights up (can get incomming calles and touch pads seems to respond but only a white screen with lines)..
q1. does anyone know how to take apart an o2 orbit or point me in the right direction
q2. will screens from other phones such as the mda compact or any others work on this phone if i were to buy one or do i need an orbit specific screen.
q3. where i can get a screen from?
thanks guys n girls in advancefor any help you can give as i am now without a phone.
try cpw, the local one to where I work replaces ANY screen for £40 all in
q1. does anyone know how to take apart an o2 orbit or point me in the right direction
Click to expand...
Click to collapse
a1.
http://forum.xda-developers.com/showthread.php?t=298413&highlight=disassemble
If you won't loose your Warrnty so let it repair in an repaircenter.
Just a simple question:
Are both phones the same? Do they use the same stylus pen? Do they use the exact same motherboard, screen, connectors and etc? The only difference is the case and keyboard shape?
Thanks in advance!
Both devices are HTC WIZARD 200. They have a different housing face plate and keypad. Therefore also the shape of the stylus might vary - I am not sure! I am using the MDA version which looks better on the front in my opinion. Allthrough I think the keyboard looks better on the 8125 ...
Anything else is the same in the devices.
A friend of mine is sending me a dead MDA and I'd like to know if I buy a Cingular 8125 with a broken screen, will I be able to use the motherboard from the MDA or the screen from the 8125 to get a fully functional unit?
Marton said:
A friend of mine is sending me a dead MDA and I'd like to know if I buy a Cingular 8125 with a broken screen, will I be able to use the motherboard from the MDA or the screen from the 8125 to get a fully functional unit?
Click to expand...
Click to collapse
I wouldn't buy a 8125 with a broken screen in first place! Research this forum for the SERVICE MANUAL of the HTC WIZARD! After seeing how to take it appart you might be able to imagine that too much can go wrong! The screen and the keyboard are the last things you can access! You open the device on the back and have to work all way down piece by piece until there ...
I saw broken screen WIZARDs on eBay for $150.00 - compared to that you can find working dev ices for $200.00 w/o contract.
Yeah I saw the service manual and got scared too, but I can give it a try I think, if I find a broken device for less than $150
I need help...
My T-Mobile MDA can power up but it will just stay on a white screen & after awhile, the backlight time-out & swtiches off.
Tapping the screen or the power button will bring it back on.
All the buttons seem to be responding & the system sound comes on when I press some buttons.
What might be wrong?
Several soft reset will not bring me to the standard screen.
Is it a hardware issue or software issue?
Please advice me what I should do to recover from this situation.
Thanks!
konker
Update:
I finally performed a clean reset & the standard WM5 "tring" sound came on.
At least, the system board is working fine.
But nothing appeared on the screen except for the greyish-white background.
I also brought the MDA into the bootloader mode but I don't see the Tri-colour screen.
What should I do next?
I noticed from the MDA Service Manual that there's a flex board for connecting the screen/front panel buttons to the system board.
Could that be cause of my problem? Or is it the LCD screen giving me problem?
Please, anyone who has experience with this issue, I appreciate any help I can get.
TIA!!
Is your MDA out of warranty? Do you have insurance? If no and I were you I would probably take it apart and check for a loose or bad connection. You got the service manual you should be good to go.
bendog2784 said:
Is your MDA out of warranty? Do you have insurance? If no and I were you I would probably take it apart and check for a loose or bad connection. You got the service manual you should be good to go.
Click to expand...
Click to collapse
bendog2784,
My MDA has no more warranty nor insurance.
I took the plunge & disassembled it.
I made sure all connections are clean & tight before reassembling the unit.
The screen still stayed greyish-white.
This morning, I screen suddenly turned on but for a brief moment.
It seems that when I slide out the screen (or slide out the keyboard), half way through when 2/3 of the k/b is exposed, the screen looks just as it should.
Beyond that it will blank out, kinda like a device having been put to hard reset from an operational state...except that the backlight stays on & then greyish lines start to appear.
So now, I'm not sure if it's the screen that's causing problem or the flex cable.
The flex cables are very hard to find where I'm & very costly too, judging from eBay auction listed.
Would appreciate any help to revive the screen of my MDA.
Thanks!
konker
I got a Replacement LCD for my MDA for $39 at WWW.HTCLCD.COM
belize2004 said:
I got a Replacement LCD for my MDA for $39 at WWW.HTCLCD.COM
Click to expand...
Click to collapse
What happened to your LCD that prompted you to replace it?
Did it crack?
If mine was cracked & there were fragmented display showing through, I would have gotten a replacement LCD with no questions asked.
However, in my case, the LCD is not showing anything other than a greyish white shade no matter what I do to the hardware.
I'm not sure it is a LCD problem as I mentioned above that yesterday, I got it to work for a short period of time at a certain position.
That said, I can get a replacement LCD for my MDA for less than US$25 here.
If it is an intermittent problem (as you described) I'd check the flex cable again.
try to reseat the connector that goes to the LCD (the large one that is locked in place with orange tape and the little brown clip on the connector itself).
help
hi im having the same probs with my vario, have you havd any luck sorting this out?
chrisakak9
Hi, a few month ago I accidently smashed the screen of my Vario. I decided to buy a new screen so I found one on ebay and installed it in my phone, however when I switched it on all I got was a white screen, no logos, nothing. The touch screen still works as I can hear the sounds when pressing it.
I am now being forced to go to a shop to fix it but I dont really want to shed out money for other people to do. Anyone know what could be causing the problem and how I could fix it?
Thanks.
hi
dont do with ur self u must send ur set to any expert person for evoid any more problems in ur PDA
Recheck the Flexi cable with which screen is attached,may be its detached or not fixed properly or even can be faulty.