hello for the flashen uses I windows xp pc. but downloading I do with vista pc.
my question is why can't I put a rom on usb stick and run it on the xp pc.
if I do that it gives an error that the file is corrupt.
If download the rom with the xp pc it will run ok.
download with the xp pc is not an option because there's not standaart Internet on it.
who help can me?
marc
h.kaminsky said:
hello for the flashen uses I windows xp pc. but downloading I do with vista pc.
my question is why can't I put a rom on usb stick and run it on the xp pc.
if I do that it gives an error that the file is corrupt.
Click to expand...
Click to collapse
I'm not sure if I understand correctly, but do you run the ROM file while it is still on the USB stick? Maybe it helps when you copy the files to a tempdir anywhere on the harddrive. Other points to take into consideration: did you run the USPL first, and do you use ActiveSync version 4.5? Since the XP pc is not connected to the net I presume it doesn't have a firewall installed, otherwise disable that too.
yes i put the rom firt on the harddisk.
then i connect the phone with activesync 4.5.
i always run the uspl first to be sure it go's okey.
then i wan't to run the ruu but it stil says corrupt.
i think i try to format the usb stick and try again.
other wise try to connect the pc upstairs and download the rom again.
Related
Would it be possible to re-flash a universal on a different computer if it failed on a pc with vista on it? i got error 101 on the pc with vista.
I'll be attempting the same rom-flash on pc with xp on it. The problem is that activesync doe not find the xda. The xda just shows usb v1.00 and serial when i disconnect the usb.
Any help would be appricated
Open your device in Bootloader mode,
Connect it via USB,
Open the ROM uploader exe,
Click next....
It won't be a problem, i think. It should work anywhere, not on just vista or xp..
Hi,
I am trying to upgrade the firmware to the latest one but USB option doesn't appear.
- I put it in bootloader mode properly pushing cam button and connecting the cable, then 0. USB appears in the 3 coloured screen.
- I disabled USB conection in Windows Mobile Device Center. I use windows Vista.
Any suggestion?
Thanks
you need to install an USB drivers from ActiveSync
thank you very much!!!
no problem
btw, these drivers is for Windows Vista x86/32bit only
Erofich said:
you need to install an USB drivers from ActiveSync
Click to expand...
Click to collapse
Hi, sorru for my stupidity, but how what do I have to do once downloaded (Vista user, Windows mobility centre)
thx!!
curehead
I have the same issue. I dowloaded the drivers and put them in my system32/drivers directory and the usb option still doesn't come up.
What next???
OK I just made matters worse now my SMT5600 gets stuck while booting on the splash screen. Audiovox splash screen in the background with the following displayed over it:
Typhoon PV/DVT
IPL 1.00
SPL 1.01.0109
GSM 11.3.13.80
Clean HIVE (1): N
Format Par. (2): N
HEEELP Please!!!
I try on Vista 32bit and Vista 64bit
Same result no USB in mtty
Only way was Installing Windows XP and runing mtty, and USB was in list on XP, connect and restore my briked HTC Universal
is there a way to do this with 64 bit vista?
EDIT:
I found this and completely solved my problem
http://forum.xda-developers.com/showthread.php?t=524619
If you know someone with WinXP, you're better off putting the files you're working with on a USB stick and using their machine for a little while. I tried on Vista 64bit and tried to make it work in a Virtual Machine with XP running and got stuck at the MTTY/TeraTermPro part.
I was working on someone's WinXP pc recently and when done, I popped in my USB key with all the cellphone tools I was using and completed the process using the PC. I had to load ActiveSync, but that uninstalls really easily.
Good luck!
I wonder how these tools would work in Windows 7 using the XP mode compatibility addon...
how about win7 plz ,
whatever i do , no USB port at mtty
So I have figured how to do this, YAY, finally. without reinstalling OS.
You will need:
VMWare
WinXP installation disc (or image does not matter)
Artemis_USPL.zip archive
Activesync installation
Okay Install VMWare, make new virtual computer then install Windows XP on this computer.
Transfer all needed files to this computer.
Install Activesync
Connect phone, then connect it to virtual pc
run CID unlock
This should bypass problems with usb drivers in WIN 7 (VISTA) - 260 CONNECTION PROBLEM
I think it given a hardware problem
Scavender said:
So I have figured how to do this, YAY, finally. without reinstalling OS.
You will need:
VMWare
WinXP installation disc (or image does not matter)
Artemis_USPL.zip archive
Activesync installation
Okay Install VMWare, make new virtual computer then install Windows XP on this computer.
Transfer all needed files to this computer.
Install Activesync
Connect phone, then connect it to virtual pc
run CID unlock
This should bypass problems with usb drivers in WIN 7 (VISTA) - 260 CONNECTION PROBLEM
Click to expand...
Click to collapse
This USB driver for windows 7 ..
Hakim Rahman said:
This USB driver for windows 7 ..
Click to expand...
Click to collapse
Thanks alot for sharing that driver! I didn't want to install a virtual computer only because of a not working driver. Finally my problem is solved.
But with Win 7 64 bit I still had to overcome the problem with the unsigned driver. I tied lots of things and finally got your unsigned driver working using this program:
"Driver Signature Enforcement Overrider 1.3b" you can find it on ngohq.com
Note: Read the installation instructions from the link above, it explains how to enable the Windows Test Mode and how to sign a system file.
Now ROM updating using Windows 7 x64 isn't a problem anymore.
Thys stuff should be pinned.
Cause said:
Thys stuff should be pinned.
Click to expand...
Click to collapse
will do, ill add this to the uspl rom upgrade tricks and tips thread.
btw Cause might be worth checking the thread dude, click the link in my signature...
GOOD WORK Hakim! - i will quote your entire post for my thread, keep it up dude!!!
done...
ive quoted you both and added the quotes to the first post here
FYI - if you notice anything that you think should be added to my tips and tricks thread, let me know and ill see to it that it will be done..
i have a newer device now so i am not always viewing the artemis section, however if you send me a PM ill get it done asap
Rn
Hey guys. I have a problem with my SGY. Windows does not detect it, tried different cables, but no luck. Running Windows 8.1.
I have also tried it with a different PC, with Win XP, it works. I also ran Live Ubuntu, it also detects it, so it's a problem in Windows.
Tried reinstalling Kies, USB drivers, but it doesn't help, no yellow triangles in Device Manager.
Odin does detect the phone while it is in Download Mode, it is in COM3.
Does anyone know what to do here?
xddxd said:
Hey guys. I have a problem with my SGY. Windows does not detect it, tried different cables, but no luck. Running Windows 8.1.
I have also tried it with a different PC, with Win XP, it works. I also ran Live Ubuntu, it also detects it, so it's a problem in Windows.
Tried reinstalling Kies, USB drivers, but it doesn't help, no yellow triangles in Device Manager.
Odin does detect the phone while it is in Download Mode, it is in COM3.
Does anyone know what to do here?
Click to expand...
Click to collapse
Follow my instructions for how to get windows 8.1 to recognise your phone - links in my signature
Basically
Install Samsung USB drivers from my firmware thread
Remember in Windows 8.1 you have to run the setup in compatibility mode - right click the setup file - click properties - select compatibility tab - select run this programme in compatibility mode for - select windows xp sp3 - apply
Run the setup - it will now run & install
Plug your phone into the rear USB port (any if on laptop)
Now plug in any other USB device that you have already installed eg a USB mouse dongle
Windows 8.1 will now detect your phone
marcussmith2626 said:
Follow my instructions for how to get windows 8.1 to recognise your phone - links in my signature
Basically
Install Samsung USB drivers from my firmware thread
Remember in Windows 8.1 you have to run the setup in compatibility mode - right click the setup file - click properties - select compatibility tab - select run this programme in compatibility mode for - select windows xp sp3 - apply
Run the setup - it will now run & install
Plug your phone into the rear USB port (any if on laptop)
Now plug in any other USB device that you have already installed eg a USB mouse dongle
Windows 8.1 will now detect your phone
Click to expand...
Click to collapse
Thank you for your help, it worked!
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
erik.aragorn said:
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
Click to expand...
Click to collapse
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Mik-el said:
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Click to expand...
Click to collapse
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
erik.aragorn said:
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
Click to expand...
Click to collapse
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Mik-el said:
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Click to expand...
Click to collapse
Yes I have not problem too, but last 2 update make big problems with WMDC under Windows 10. Only solution what I see is, found old NB and run Windows 7/8 on it.
Or is it possible run Win CE 6.x app from this PDA on WIndows Mobile device with WIndows 6..1/6.5? I try it, but i got error. But I think it with little editing it is possible run it. But how?
https://riftek.com/eng/support ->Railway Wheel Profile Gauge -> IKP-5 Software for PDA (from 2016) (2MB)