Mine is Cingular 8125
I flashed RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship to get IPL/SPL 1.06 and Redio 1.xx (I don't quite remember it).
then I flashed WM6 roms 5.2.1921(build 18521) which does not involve IPL/SPL and Radio.
Everything seems normal.
I leave it charge for all night, I saw 100% this morning, but the it drop to 50 after half an hour, and completely died after 1 hour.
I cannot recharge it when the phone is off, all lights are off, no flashing.
of course, I cannot turn it on.
Few days ago, when I was using WM5 with IPL/SPL 2.26, I can charge the battery, and I can use the phone with GSM and Wifi on for at least one day without recharge.
Need help, thank you.
Please Email me: [email protected]
I solved me problem with an universial car charger for variable voltage.
This charger is not for this phone, but it for many other things, such as PSP, Radio, etc.
I set the voltage as 4.5V, and I use two wires to take over the electrisity from + and - to the back of my phone.(there are a + sign and - sign on the battery), I hooked on the phone's + and - brush, and use this universial charger bootup my phone, then put on the battery, the battery would be charge for a little while, and enough to do another boot.
Dont use this method to charge the battery, it may burn your phone. and dont use higher than 4.5V for first bootup.
the same problem with you.the battery seems not so stable after I flash wm6 rom
PLease help me
I have a similar problem one night i was charging my cingular 8125 then after i wake up i look my cingular and it dont turn on!!!!
I put again to charge and it make the led red and if u leave the battery the red led continue, please help me!
Same problem but solved somehow
Same thing happened to me and I somehow solved it. It is not normal for a battery to suddenly drop dead. The problem is I think the battery has 2 cells inside and sometimes one is charged and the other gets stuck uncharged when the battery is old.
What I did is:
drain down the battery fully until the phone does not turn on any more. So the two cells get ballanced at 0 charge.
Plug in the official wall charger when the phone is off.
Press the turn on button. So it charges a little while phone is off. Wait 1 minute
Press power button again to turn the phone on, and leave it on until (if at all) charges to 100%.
Just my experience maybe it will work for you too. Worth trying! Correct me if i'm wrong ... good luck
Related
I put my phone (T-Mobile MDA VARIO) on charge last night before I went to bed, nothing strange about that, but this morning the phone was completely dead ,wouldnt charge, no lights, wouldnt boot etc.
After searching this forum I found what I thought was the fix for a dead battery (3 AA batteries/wires etc) I did this and the phone now boots and says its chargeing, but only if I charge using USB, it wont do anything if I use the wall mains charger
If I take off the wires/AA bateries, the phone shuts down and wont charge, but as soon as I put the wires/batteries back on it works as normal.
While the phone is running I looked at the power application & it shows the battery chargeing, but wont hold any charge at all
obviously I cant walk around with 3AA batteries & 2 wires attatched to my phone.
does anyone have any suggestions please
cheers
Phil
I'd look into a new battery...
If this were a notebook battery I would say the cells had collasped.
exact same thing happened to me last night. I think there is an issue with charging the wizard when its off, like it doesn't know when to stop charging and it overloads the battery. Do you happen to have the link for that 3 batteries and the 2 wires trick, I want to give it a go. Thanks.
Hi there,
First I apologize about my poor English, I am Brazilian and should speak portuguese, but this is the best forum ever... so I'll try my English
My story:
Four days ago my 1,5 years old 9100 running the WM6 NTS was working perfectly, the best device I ever had. But, at night, I removed the battery to get the SIM card and then I put the battery back but did not turn on the phone. I used the SIM card in another phone during the night. I was afraid to lost it.
In the morning, I removed the battery again, put back the SIM card and then the battery. When I tried to turn it on, nothing happened, just like as if it was without any power. I was surprised, because I had fully charged the battery in the night before and before I first remove the battery, it was about 80% of power. So, I decided to try to recharge again, but there was no lights on. I left it charging for about 10 minutes and got nothing.
So, as I was leaving home, I put the 9100 in my pocket, after a few minutes I tried to turn it on again and it worked. The battery meter was showing about 80%.
Ok then… It worked well on Monday. But when I woke up yesterday morning (Tuesday), the phone seemed to have self-restarted during the night. So, I typed my password and it started working well again. I checked the battery meter and it was showing about 40% of charge. After a few minutes the phone seems to be totally dead. I tried to charge it again and after 2 hours I got nothing, it was still dead, did not turn on and there were no lights on.
Later on that day, I got a multi-meter and checked the battery tension. With the positive on my left I could check that measuring the power with the wires on the 1st “slot” and on the 3rd on, I get 3.47V. Measuring the 1st with the 4th I get 3.63V and measuring the 1st with the 5th or 6th I get 3.75V. Check what I mean at http://webtennis.rg3.com.br/qtek_9100/battery.gif.
I tried to remove the battery, then put it back and then turn it on again… It started, but in a few seconds, when was showing the OS, SPL, etc… it went off. I tried that again; it started, loaded the OS and went off. Once again I tried this, but with the power cable on, so it started but in seconds was off again.
So I thought “that might be a bug, maybe if I run the update utility it will work”. I started the phone in the bootloader mode, but before I connect the USB cable and start the RUU the 9100 went off. A few more times tring to remove the battery and starting it again, it went off and never came back again!!
I plugged the power cable on the wall and on the phone and there were no lights on, but I could feel the battery a bit warmer, just like it used to get. I left on the wall all night long and today in the morning still nothing. I removed the battery for about 30 minutes and got nothing, neither the screen with the OS, SPL, IPL…
Now I am despaired, don’t know what to do, no clues. I am in Brazil and don’t know where I can take to be repaired and have no plans to get back to Canada or Europe for the next 3 months.
Can you help me with this problem? I love my phone and want it working again.
Thanks for all your help.
Battery problem...?
It seems as thought you may be having a problem with your battery, not your phone. Try buying a battery off eBay, they are pretty cheap, and that should tell you what the problem actually is.
Or if you know anyone that has a wizard, try your battery in their device. If the problem is still appearing, then you will know that you just need a new battery.
Battery or charger ?
I agree with zakhir_n, it sounds like a battery issue not the phone. My friends MDA battery died after 2 months of use, so you can never be sure. We swapped batteries and revealed it was his battery not taking a charge.
Next check that you are using the original charger. I went away on business and grabbed the nearest charger for my 8125. Needless to say I grabbed a Motorola charger and it refused to charge the dead battery. Make sure you have the original charger, as it MUST say 1000ma or 1Amp output on the plug. The Motorola one I used was only 500ma or .5Amp and it was unable to recharge a dead 8125 (MDA) battery.
New status: WORKING
Hi there,
Thanks for all the posts.
Well, I checked my charger and it is a 1A 5V and my battery gets 100% of charge.
This is what I did:
Fully charged the battery, removed it for about 1 day an then I turned it on. Surprise!!! It was working and worked for 20 minutes and went off again e seemed to be dead.
Once more I the same thing but this time I flashed it with an official ROM. Fully charged the battery and removed for about 1 day. When I tried to turn it on, it worked as it was new.
So I flashed it with the WM6 Core 2.0n. It worked perfectly. When the battery got 80% of power, it restarted itself for several tines.
Now I bought a new battery and it is working very well, no problems till now. Guess you were right… I really had to change the battery.
Thanks for all the help and sorry about my English!!!
Regards,
Arthur
Nooooooooooooooooooooo
Hi there… Got the worst birthday present ever!!! Today I woke up and my QTek 9100 wasn’t working.
I got a new battery, when I put it on my phone it was 54% of charge. I used it till it gets 13%, then I fully charged it with my computer’s USB cable. Used the phone for 1 day and the battery was again around 80% of charge (just like the other time). I put it on “flight mode” went to sleep. When I woke up……. it was not working anymore, I put back the old battery and got nothing.
Now it is with the new battery being charged with my wall charger (1A 5V), but there is no lights on.
I already tried to run the WM5, tried a new WM6, checked the charger, replaced the battery and none of this seems to solve my problem… Do you know what more I could try? Do you know where I can send it to fix in Brazil?
I don’t know what to do… I already sent e-mails to QTek and to HTC and after 1 week got no answer…
Thanks for all the help!!!
Hi! i've bought an used Qtek 9090. the problem is that this Qtek don't power on! it doesn't go on bootloader mode, doesn't go on hard reset ecc... but when i charge it, the red led turns on!
what can i do? please help me
well try to charge the battery only in the cradle
if this not help try to borrow working battery from someone, if your device does not start even with working battery then you are screwed (a hardware problem of some kind)
no i think the battery is ok.
there is a way to restore the bootloader? i've read about the jtag, but i don't know anything... can you explain?
Battery is charging only when the LED is orange/amber. Red means problems with charging - that's why xplode proposed putting the baterry directly in the cradle, as it can "fix" the battery.
Well the red light means there is problem, the most comon problem is the battery, but the red light is also shown with motherboard, bootloader, kernel, and other problems
one more option is there. if the battery is not charged from a long time it needs a shock before recharging to activate the electrons. u should apply some 12v at 1 or 1.5 amp for 15-30 sec. than battery will get a little charge which is sufficient to turn on the phone once.................... but do not apply this voltage regularly or for long time.
Hi i have a problem. Yesterday my Prophet battery goes to 0%, when i back to the home I plug-in it to charger. The light-emitting diode start flashing, but i can't turn on my phone. After 8 hours connected to charger Prophet still won't work. DO you have any idea? Maybe this is battery problem?
PS. Sorry for my poor english.
same with me,my dopod 818 pro won't turn on after 2 month not use,i try to charge,but the led not light..its off..i have no idea witn this problem,please help me to solve.thanks
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
errhec said:
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
Click to expand...
Click to collapse
Oh.. great! do you know which pin of the battery is (+) and which pin is (-) pole? I want to charge the battery by a balance charger.
happened to me couple months ago
and i used desktop charger for 5 minutes directly on the battery
then plug it in and charged normally with usb connector
used the desktop charger on the first and last pins on the battery
Hello, i'm sorry, my english is bad. but i wanna help.
Now, before 1 week i have the same problem, my qtek s200 after update whit wm6.1. OK 1 month everything was ok, but after that /i don't now where i go wrong but no matter/ that my phone start stuck in bootloader. I let it one night on to see, maybe will turn,and at the morning he wont start, even the light wont start wen i put the carger on. I take one charger/from sony erricson/ cut cable, there are 2 cables, take off the battery of my pda, put directly cables from sony charger in to battery, black is minus, red is plus, but don't worry, there is no problem if you make mistake.Let it like that 1-2 hours, put battery back on pda and everything will be OK.Now in my case my ROM fu** up, i go to tree color screen/see more info how to do that/ and replace the ROM.and next time do not full dry the battery.Hope i help.
Hello! i have problem with my streak 5, few days ago battery drained out and phone shut down.
i connected ti a charger but nothing happen, no reaction on phone so i left it on charge all night.
Still no response, no picture on the screen, no backlight, no LED, completely dead.
I can get reaction only when i enter in fastboot mode (holding power+camera)
IN this mode touch screen not working, computer recognize device and i can do flash and i do it successfuly but i still cant turn on my phone.
What can be a problem, I tried everything with no luck, also i have not found anyone with same problem
I have 2.2 official, no root.
Try changing the battery. The one you have could be defective, or else there is an issue with the charging circuit.
I measured with instrument 3,67V, connected od 1 and 4. And few other combination i get from 3,30 to max 3,67V.
This seem to be ok, regardless of that you think might be the battery?
Never let the battery drain that much becase now the battery doens't have enough power to start the charging... you should charge the battery manual with some wires on (+) and (-) from a old phone charger be carefull with the voltage(V) and the ampers(A) not to brake the battery, 20 or 30 min should be enough, or you should buy one of this Universal charger. Then place the battery in the phone and it should work ok .
This morning I optimistically tried to turn on a phone and it was successful
battery Indicator showing 7% so i connected to charger, now is normaly charging, everything is working normally...
I do not understand, what could happen? i few times drained battery to 0% but still able to charge, maybe battery is problem, but again, turned on after 3 days
Don't worry the battery is ok the problem is not to empty it again to 0%, at 5% 7% close the phone if you don't have a charger to charge it. This method applies to every phone and battery. It's not a good thing to fully discharge.
Now is fully charged and power is 4,07V.
So obviously battery caused this problem.
I think, good info for all who suspect on battery, 4,07 V is power you need to have on fully charged battery.
With 3,6V you cant event turn on the phone.
Thank you for suggestions