Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
zsizsi said:
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
Click to expand...
Click to collapse
I agree 100% that this should be easier. But I think ActiveSync is actually a service that the laptop offers, not the phone. So on the phone, go to your BT manager, select your laptop, and then select services. ActiveSync should be one of the choices. After that, you should be able to connect to ActiveSync via BT, but I think you need to initiate the connection from your phone.
Activesync via Bluetooth
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
thank you all for your input.
i tried everything you guys suggested and it's still not working. my comp only offers a serial connection. is that ok? it has this toshiba bluetooth software on it not the original windows kind.
when i choose connect via bluetooth on my ppc's activesync it sais there's no computer that supports bt.
any ideas?
thanks again
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Hi,
Thanks for all your effort.
I did what you said and it's still not working.
When I'm trying to connect from my phone via bluetooth it satill sais it cannot find existing blueooth partnership with a pc that supports activesync.
what am i doing wrong?
Thanks
IceGoal said:
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Click to expand...
Click to collapse
Phat!! This works for me with my Acer laptop and Bluetooth connection, thanks man!
Sweet, took a few tries, but works like a charm.
Thanks
Bump
I just wanted to bump this to say thanks for posting the bit about using the LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)] port instead of the client port. Trying to get AS working using the Toshiba stack was driving me around the bend!
My pleasure
I've learned a lot from this wonderful board from a lot of wonderful people. Glad to be part of it!
You're the MAN
Thanks. This also worked for my Cingualr 8125. Many hours wasted. Glad I found this post. Thanks for your help.
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
The only thing that worked for me after 4 days of messing with it was to do a cold boot.
The first thing I did after the boot was to follow the instructions. Voila! ActiveSync magically appeared.
Hi all,
I have exactly the same problem with my qtek9100 and my IBM T43 Laptop.
I tried many times but....still not working!
As zsizsi if I try to make a relationship via PDA, it asks me the pairing key, and I'm blocked.
If I go through PC, I can do pairing, in the services I flag activesync, I configure the same com port that I have on AS (com 8) and when I0'm in the bluetooth wizard on the PDA, related to the PC I can only see 3 services:
hands free
remote connection
serial port
no activesync service to flag.
If I try then with the PDA Menu>BT connection it aswer that there is no relationship with PC supporting AS!!!!What the hell!
The only thing I see is that in my BT config in the local server the BT wizard creates a serial port named My activesync......
I have tried also your suggestion but.....
tinman44 said:
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
Click to expand...
Click to collapse
thank you soo much for that info...enabling the "PAN networking service" finally allowed me to connect with my toshiba qosmio laptop
If the devices are paired... You have to select a service for the pda BT connection
Only when you manage to select the servive Activesync (a comport has to be valid assingd) then a connectin can be astablished.
In active sync you must assign a com port.
See the manual in activesync BT
Yes, I can guess it.
The rpoblem is that the devices are paired, the activesync service is flagged in the PC (while I do the automatic pairing devices withn a wizard).
But I can't still see the service in my PDA.
I can only find:
Hands free
Serial port
remote connection
No activesync service on the PDA relation wizard...
Any other suggestion?
Another issue.
When I look in my BT services, I can't find an activesync service, but only an icon (com plug) called My activesync.
Look at the properties of this icon I can only flag automatic/manual and Secure/unsecure connection, and there is the window manu to select the com port (that is the same selected in Activesync settings).
Is that correct, or I should find a specific activesync icon (like PIM syncronizing ....)
Blinks....
SKID
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
FOLLOW THIS STEP BY STEP.... I HAVE DONE IT 3 TIMES FOR MYSELF AND FRIENDS ON DIFFERENT LAPTOPS AND IT WORKED FIRST TIME - EVERYTIME!!!
PS. Delete all existing pairings, relationships, COM ports etc, START FRESH!
THANKS MAN!
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
Thanks IceGoal, on my HP laptop it works superb.
But I have to say that those people that work on our mobile network provider company are uncapale, because they said that this is impossible to connect.
Thanks again folks.
Hi,
could an expert out there advise me if my theory is possible please?
Using Remote desktop/Terminal services : See whats on my PC/Laptop on the screen of my XDA2 - connected via cradle and usb(as usual). If so what do I put in the "Server" box of the XDA Terminal services prog and on the "Main" PC.. Do I have to make a Network first? Or ?
Thanks to all.
The site is great but much of it goes straight over my head at the moment..
P
ummm ... your theory seems not that much difficult as you can implement it using Bluetooth networking I guess ..
you can setup bluetooth networking from Pocket PC to Laptop then you can browse what your home PC conatin from your PDA
give it a try
I hope this is what U was talking about , if not please give us more clarifications
Cheers
It is better and faster to use Wifi if you're going to use terminal services.
Been using this method since last year.
Thanks but I do not have wifi or bluetooth...
There is a ref to doing it on MS site via the cradle and usb but then it shoots off in the over the web stuff...
I have tried just now but nothing connects.... But I notice that when I check my desktop (xp) pc under the rempte tab - I only have Remote Assistance.... Could this be it? Perhaps I do not have Remote Desktop installed then ! Eh? I will try to locate my original xp discs and see if I can install !!??
Ta.
Remote desktop or Terminal services connect only via IP address.
So you can only connect via TCP/IP using WIFI on your XDA.
Bluetooth 1.1 has no IP address setting so it is not possible also.
I tried all methods since last year and WIFI is the only solution or if your XDA has a backpack you can use a CF type NIC for wired connection via crosslink or hub.
Still Wifi is the cheapest and cleanest alternative. You can use Adhoc settings between your PC if you have no WIFI access point.
hy
can anybody tell me how can i set the connection
becouse when i connect to my pc through usb it show that tha account is not
set up (on the remote windows srceen)
and is there any BT REMOTE progz????
thanx
remote desktop is a protokoll in windows 2k and newer!
you must enable it on you host and it works via network connections ... usb too if you have setup your xp to accept connecten over usb.
the remote of windows is too bad
I use z2remote 1.2 good one I think
the connection. activecyunc what ever connced with, bt wifi usb, internet too
You must right click on "My Computer" then Properties then remote desktop tab to make sure that the remote desktop is on.
You also must know your computer name or its IP Address.
All I have to do is when I open the remote desktop on my 818Pro. I just typed in my computer name and it will connect me right away.
I'm not sure if you can use USB through Activesync though. I use wireless at home.
Hope this helps.
Hello Everyone
I am new to android ndk development i had few queries regarding networking:-
I have the C code through which i can find out to which remote computer i am connected through my device i can detect remote computer ip,port and connection state that is weather it is listening,established etc.
BUT now i have a problem i have to find out the mode by which i am connected to remote computer that is weather i am connected through wi -fi,through BLUETOOTH or through GPRS.
Does anyone has any idea how can it be done through C or java?
Hi guys
I have a small issue with my remote connectivity to my android, I hope you guys can help with, the scenario is simple and my target is to connect to my android remotely through my laptop while the android is connected to my PC in the other room through USB cable, so what I have done already is that am connecting the Android to the PC through a USB cable and the PC to the Laptop through the LAN, now am connecting Remote desktop from my laptop to the PC and on the PC I installed application that can connect to the android so I can totally see the skin of my android and control it, but the final thing I wish to do is to make a phone call, here I connect a Bluetooth to the PC and I connect the Bluetooth as free handset to the android it didn't totally work,
So guys as you see its interesting scenario and if we work together we can accomplish something really assume
Really appreciate your help, Thanks
There are some computers that can act as a bluetooth "headphone", I'm one of the lucky ones.
Hang on while I search for my bluetooth drivers...
Bluetooth Radio by Qualcomm Atheros
Driver for my Asus N56: http://dlcdnet.asus.com/pub/ASUS/nb/DriversForWin8/Bluetooth/Bluetooth_Atheros_Win8_64_Z800206.zip
It appears that most of the Atheros bluetooth cards support this feature.
Thanks AmeesingNoob
But the thing is that I already got a Bluetooth USB connected to my PC working as a Hands free, so from the PC itself I can do Voice call through the PC speaker and headset but my trouble is that I can’t do this through the Remote laptop that is connected to this PC
So it would be like this:
Mobile Phone Sound > A2DP > Computer 1 > Computer 2
Click to expand...
Click to collapse
Am I right?
Exactly,
the first connection is between the mobile and the Computer 1 which it is a USB connection, and the second one is between Computer 1 and Computer 2 which it is a LAN / WAN connection.
Ah. Sounds like something I could use too.
I did some searches on Google and browsed some forums; found this.
PulseAudio is a sound server, a background process accepting sound input from one or more sources (processes or capture devices) and redirecting it to one or more sinks (sound cards, remote network PulseAudio servers, or other processes). -- Wikipedia
Click to expand...
Click to collapse
Please note that this software only runs partially (command line, no gui) on Windows. It was written for Linux computers.
mhhhh
I will try to download it and test it , then I will post my result in here
hope it will do the job,
Good luck!