Database Users

Activesync 4.1 - not working

Can anyone help please?
I cannot get my xda mini to sync. Basically it just keeps running and nothing happens.
I have researched a lot of threads which refer to setting up a dummy server connection for what I presume is the the "exchange server" which I have attempted - is this a false IP address please?
On my PC, activesync diplays Exchange Server and my XDA with a list of the sync items below.
I keep getting a message on the XDA saying it cannot retrieve an IP address for the connection. Sometimes when I sync the try to connect via GPRS
I do have a wifi connection set up which now works (most of the time).
TIA.

I have the same problem as you with my QTEK 9100. Sometimes it works to connect the device to my portable computer (Compaq Presario 2800) via ActiveSync but mostly it does not. ActiveSync just keep looking for the device but doesnt find it.
I have also tried after that I have turned off the firewall and antivirus software, but it still doesnt work. The few (2-3 times) that it did work I had my firewall and antivirus running.
Anyone have an idea what I should do? It's a brand new QTEK 9100 (just got it a few days ago) with ROM 1.3.7.13 SVE, ROM date 9/29/05. Since I can't connect my device to the computer I can't upgrade the ROM.

turn off your firewall
disable your onboar intell wifi card if you have one

Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?

nolovelust said:
turn off your firewall
disable your onboar intell wifi card if you have one
Click to expand...
Click to collapse
thanks but as I said I have turned off the firewall, and I don't have a built in wifi card in the laptop.
macrinus said:
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
Click to expand...
Click to collapse
Yes it is the same problem no matter of the soft reboots. The only times I get it to work is when I have reinstalled the activesync 4.1 software on my laptop, after a reboot (of the laptop) it does not work; instead it only display a network icon with "Limited or no connectivity" (this is also without both firewall and antivirus installed) when I connect the device. The result is that AS can't find the device...
My theory is that it somehow looses the USB drivers installed with ActiveSync 4.1 when I reboot the computer. Anyone know how to fix this? Which (dll?) files belong to the USB drivers? I might be able to manually replace them in the correct path if I find that out...

any news??? I just met the same problem

simple enuf chaps...
i just met the same problem and the fix is pretty simple...
remove a/s 4.1
re-install a/s 3.7 / 3.8.1
re-establish the partnership
re-install 4.1

How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter

I am using Dopod 838, the asia version of Qtek9100.
I also seems to have problem on activesync 4.1 which keep on sync and fail to connect. When it fail. I will try
1) In Windows Task Manager, kill wcescomm.exe
2) Kill everything in wizard
3) manually turn-on activesync4.1 on pc again.
4) connect wizard with PC again..
I just bought my phone for 2 days and i have to try a few more times to confirm it really helps.. may be you can give it a try too.

PeterP said:
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
Click to expand...
Click to collapse
you will need AS 4.0 and above for all WM5 devices

You might want to check device manager when your device is hooked up via USB and make sure there are no exclamation marks on your handheld device.
I have a laptop and I only installed ActiveSync 4.1 and it works fine. I've even re-imaged my laptop since getting the phone and wasn't a problem second time around. I also installed 4.1 on my work PC and it works fine there too.
Not sure if you can use anything older than 4.0. (Not sure the reasons why)
At work I tried to use 3.8 (Just for the hell of it) but 4.0 updates all the USB drivers and stuff. Anything below 4.0 will not recognize WM 5.0 devices as jfran said. After installing 4.x I don't know the reason or need to uninstall then install something older then uninstall and reinstall 4.x.
It should work straight after install. However I do NOT know what happens if by chance you had an older version of ActiveSync then tried upgrading to 4.x. Should work though. I know people have had success upgrading from 3.7 and 3.8 to 4.1 to use the newer Dell Axim x51v which have WM 5.0 here in my environment.

Thanks everybody for your replies,
it was after hamish_dy tip I wanted to know how to get an connection between AS3.x and a WM5 device, since I haven't been able to do so. And I also have read that WM5 needs AS 4.x in order to sync.
Have had my Qtek9100 now for a week, and have been studied this forum in detail for a solution on my problem.
Previously I had a Qtek S100 which synced with my laptop together with AS 3.8. My company uses Groupwise as e-mail system, but with Outlook 2002 also installed on laptop I got it working (also after some days of trial).
Now with my Qtek9100 nothing happends when I plug in the USB-cable. Well not true, it will connect with an IP-address and I can from AS see the filestructure on my Qtek, BUT nothing starts syncing (calendar, contacts, e-mails,etc.). I watch task-manager but nothing kicks in. Previously with my S100, mapisp32.exe always kicked in and was the magic component between outlook and groupwise. With AS 4.1 everything is dead in task-mgr. I also receive the 85010014-error message sometimes.
Have uninstalled AS 4.1 several times, cleaned out registry of AS keys, rebooted, installed AS again, reinstalled outlook, turned firewall off, turned antivirus off, soft-reseted my qtek, and so on. Have downloaded the swedish version of AS 4.1, since my Qtek has swedish language, and thought that was the reason. But no. Soon out of options and ready to take my new qtek back to the dealer.
Any help from anyone is very much appreciated.
thx in advance.
Peter
----------------------
ROM: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio: 01.04.10
Protocol: 4.0.13.17
Ext Rom: 1.3.7.125

One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?

ccisn said:
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
Click to expand...
Click to collapse
No, manual sync does nothing.
If I can't find any solution before mid-next-week, I will find a workstation at work and load only the minimal components/applications needed and try to nail down the issue, as a last try. I work with IT myself so I'm not keen to reimage my laptop, there are just too many things to reinstall.
thanks for the advice!
Peter

Active Sync Sync via USB Resolved (well for me anyway)
Over the last month I have not been able to sync my Wizard to my laptop via USB. Via bluetooth worked a treat, but I was not able to upgrade ROM via btooth.
This morning, completely by accident I resolved the issue with USB sync'ing to Active sync 4.1.
This works for me:
1. Connect Wizard to laptop via USB (you will get the usual problem, with ActiveSync saying "Connecting" and nothing else
2. Whilst phone is still connected via USB perform soft reset on phone
3. The laptop system tray should display "Found new USB device" and then say "Pocket PC USB Sync found"
4. When the laptop / pc has finished installing software and displays "Your new hardware is installed and ready to use" Disconnect the USB cable from your Wizard.
5. Wait a couple of seconds and then reconnect your Wizard via USB and hopefully it will work.
Please let me know if this works for anyone else!

One more thing you could try before throwing it back at the salesman is to check your network connections.
Go to Control Panel and select network connections - make sure you are set to view details and look for the "Local Area Connection" that has a description of "Windows Mobile-based Device". On mine it is "Local Area Connection 3". You may have to scroll to the right to see the description.
Right click the relevant connection and then click "properties". Make sure that the following entries ONLY have a tick next to them.
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
For some reason on mine none of them were initially selected :?
Click OK, when I did this it started syncing straight away!
Good luck!

I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............

s4vva said:
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
Click to expand...
Click to collapse
Hard reset has done the trick, so it turns out all problems may not be down to our pc's......

The same thing happens for me sometimes. What I have found ou this helps.
Unplug pda from sync cable. Kill all active programs on the pda. Plug in sync cable again. Viola! It syncs.

I have the same trouble, activesync just says connecting and thats it, i havent found any particular reason for it. SR does not help, just HR which is kind of overkill. Im really glad for the sprite backup software. I have tried all different things i could think of while i couldnt sync and nothing helped. I have allready about 3 HR after me.

USB PROBLEM. ACTIVESYNC keeps Connecting but no sync ! :-(

Hi,
If anyone can spare some time to look at my problem.
Basically : I have received my new O2 XDA EXEC and have tried a few times to synchronise it using
- the included 4.0 Activesync
- the download 4.1 Activesync
Problem is : when I plug the USB to the device, it is recognise and Activesync start spinning and displays "Connecting..." but would just keep connecting without moving further (as screenshot below).
I looked for issues like this on various website and here, but nothing really looks like what I am experiencing, anyone has an idea where to go from now ?
I checked
- firewall (activesync is in the list of exception)
- uninstalled activesync, reboot pc, reinstall, reboot pc.. still no luck
- install activesync on a second PC and do the same: no luck
- used a different mini USB cable, no luck so it's not the cable.
Do you think I should send my XDA back ? everything else seems to work (GPRS, Wifi, BT..)
Thanks a lot for your suggestion ?
PS: the device is recognised as I can ping it too from the PC.[/b]

Well you seem to have hit all the usual suspects. Regarding the firewall issue, in ZoneAlarm I also watched the logs, found a blocked connection attempt that seemed to be my device and set that to the trusted/allowed zone which helped back when I was having problems. The next step might be a hard reset on the Exec.

Try disabling your firewall and test the connection.
For some firewalls you have to do more than just allow ActiveSync.

Try diabling the password. That cofused my activesync the first time I tried my replacement handset

Disable firewall completely, than retest if activesync will work. Helps in 99%.
HTH
Chris

I'm currently having "issues" with ActiveSync too. Every time I try to sync when there are more than about 25 changes that need updating, my JasJar decides to open an ActiveSync window on the JJ (for no apparent reason).
It only manages to show the top half of the ActiveSync window (The "Connected" section with the progress bar are missing) then it freezes, requiring me to do a soft reset.
The only way I can currently sync all details successfully is to kill all non-essential processes with a process manager, and remove all today plugins (!), then it works with absolutely no problems. Not a very elegant solution, but it works for now, and as I've tried absolutely everything else I can think of in THIS thread, it'll have to do for now...

it works fine now ! I have disabled the firewall and also ..
uninstall Cisco VPN client, so not sure which one it was that caused the connexion problem.
Thx to all your fast responses.

I have mine Sync successfully after removing the anti-virus software. Not sure whether it works or not to install the anti-virus back on. I have followed all the instruction in Microsoft website, but with Trend Micro installed, it just couldn't Sync. That's why I removed it completely.

Maybe this will help You (or me ) further :
I can sync at home without problems, W-XP ASync 4.1, Internet through a Linksys Firewall/Router.
If I come to the office I get exactly what You have, visible, but no syncing.
I use W-XP there as well, same ASync 4.1, Internet through the Office Network.
When I disconnect the network cable, Microsoft Office will immediately notice and complain. I wait between 30-60 second and ASync will actually connect and sync. It will not sync to a Exchange Server though, as this is disconnected with the cable.
I would have come with this issue here, but probably a little later, as other problems are of higher priority to me now, but maybe this information helps here.
regards,
Ruud

Perhaps this hint may help you under certain conditions: http://forum.xda-developers.com/viewtopic.php?t=39002
regards
df2jh

Hi df2jh,
thanks, interesting read. I was able to solve my issue in the meantime.
My firewall, MS is restricting the programs used by MS ASync and therefore does not allow syncing.
Solution for me :
Disabled processes wcescomm.exe and rapimgr.exe in the Windows Task Manager
Wrote a text-file in the directory where ASync is in !! which will be searched for by the firewall (do not recall the name of this file, but can check it out if somebody needs it.) This file has one entry to disable the firewall in concern of rapimgr.exe.
Then run rapimgr and wcescomm by hand and, WOW, WCESMgr.exe will run itself and syncing it working flawlessly.
What I did not understand until then :
1) this special file should be in the ASync directory, not in the firewall directory
2) this special file is only searched for when ASync is run (PC boot), not when the USB is connected
For me this is solved, though not everything else in my sync problems.
Hope this helps others,
Ruud

Might not be the same issue but you may find my post in this topic of use
http://forum.xda-developers.com/viewtopic.php?p=225939#225939

Might not be the same issue but you may find my post in this topic of use
http://forum.xda-developers.com/viewtopic.php?p=225939#225939

Had same problem on Kaiser and Wizard
I fixed it by going into Settings>Connections>USB to PC (in WM6.1, USB to PC is in system). Uncheck Enable Advanced Network Functionality. Fixed my active sync not connecting problems on both phones.
Hope that helps some of you!
escapemcp

Activesync hanging on "Looking for changes"

Hi
Activesync just decided to stop working yesterday on my O2 XDA Mini S.. I've uninstalled and reinstalled both Activesync and Outlook 2003, and even resorted to hard resetting the device, but I still get a hang when I connect!!!
Any ideas?
Shaun

make a new partenship but do not tick the media box.something to do with media player. i have been having the problem for over a week.
whatever you do do not open media player wile sync as i will desconect the device.let me know how you get on.

I have been having this problem regularly with both my phones since I got my XDA mini S and MDA Vario 2 weeks ago.

I had the PPC6700 for a couple days (switched from cingular to sprint - hated their service so now am back to cingular) now I have the 8125 and with both devices 4.1 blows - very tricky to configure. My issues came from VPN mostly - I say mostly cause it still doesnt like to connect when I have that tunnel in place. What I determined to work on both handsets was sync the cal, inbox, tasks, and contacts with exchange and sync NOTHING locally. If I need to transfer files I do it via mSD card - apps install regardless. This is a high level accounting of what I went through, but will go through more detail if you want.

I had the same problem also some weeks back. It ended up being due to the software firewall I am running (sygate). I've discovered that I have to completely exit the firewall app (rather than just allow all traffic) if I want to sync properly - a real pain!
Based on a bit of hunting I've found out that the activesync connection works by creating a software USB - tcpip bridge. The first step on connecting the win mobile is to assign an ip address to the connection. This proceeds ok with the firewall app running as it works via the normal DHCP port numbers. Once this is done activesync knows there is a win mobile machine connected and starts trying to commumicate with it ( connected..... looking for changes). The problem now is that the communication between activesync and the machine occurs via different ports number *which are blocked by the firewall app*. This also explains why you can't sync when you have a VPN active - the VPN blocks the traffic from the 'extra' local address created by the activesync DHCP request and activesync consequently can't tell the win mobile is attached.
What I don't understand is why if doesn't work when I tell the firewall to "allow all"! There is a document on microsoft's site explaining how to go about setting up a firewall to allow this traffic (google for 'activesync firewall problem'). Problem is that it doesn't seem to work with the sygate firewall as far as I can tell...... any ideas anyone?

does anyone know if you can install IPX/SPX on the handheld?

Hi
Thanks but still not working... I am not running my VPN (I know Activesync never works with my VPN). I do not have any firewall software in place, and the windows firewall is off. My antivirus is disabled when I sync, and I have a valid, DHCP assigned IP address.
I am not syncing media - in fact the *only* item I have ticked is files.
I can explore the pocketpc OK, so I know its physically connecting.
:-(
Any other ideas?
Shaun

this page may help
http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm

Hi
Sigh, still no luck. So far I have:
1. Repaired and then Reinstalled Activesync 4.1
2. Repaired and then Reinstalled Outlook 2003
3. Repaired mapi32.dll
4. Hard reset the XDA mini S
5. Deleted all partnerships, both sides
6. Changed sync options to only sync favorites
7. Reapplied XP SP2 and patches
8. Removed all firewalls and antivirus software
9. Tried different cables, and IR connections
Yet still, no matter what I do, I get "Looking for changes" forever. Exporing the PPC is fine.
I cannot reinstall XP - this is an company laptop, and MIS do not allow us to reinstall our OS, and as they don't support the XDA, they won't reinstall XP either....
So I'm left with no options - back to a palm!?
Regards
Shaun

Sorted!!
Phew
After random playing I found it... It hangs if "favorites" is n the sync list. If I delete the partnership and when the wizard restarts, untick favorites, it syncs OK.
In all my testing, I had stupidly assumed things like files and favorites would work...
So... I think I'll live without favorites.
Shaun

U must have stuff which is not uninstalled properly. try unchecking everything for SYNC except Files.

I have experienced the same problem. Activesync worked great out of the box, but several days later, began hanging up on "Looking for Changes". Nothing that I tried fixed the problem, including reinstallation, deletion of devices from both sides, syncing with BT, etc. Finally, I gave up and did a hard reset, and Activesync immediately worked perfectly again! I assume that one or more programs I installed on the MDA along the way was causing the problem, and I am now going to methodically reinstall apps until I find the culprit. I will post again when I identify the guilty party.

had the same problems, tried all the standard solutions and nothing fixed the hanging on sync issue...
until i plugged the phone into the usb add-on card instead of plugging in to the motherboard's usb ports.
haven't had any problems since!

Had about the same problem.
Just synchronized once, and on a second connection hung on connecting or looking for changes. Tried everything I could think of.
Last resort was a cold reboot without restoring the backup..
Then synchronizing worked like a charm.
Put back the backup and it still works.
Why? Beats me........
Edit
It stopped functioning again. Have to do a soft reset and delete the partnership on th PC.
Then it will sync for as long as the Wizard stays in the cradle.
When I take it out it won't sync for a second time

Hangs on looking for changes
I find it does this everytime, without fail, if outlook is open when I connect.
If it's closed, and I connect, no problem.
Another quirk is media player.
When the device is connected and you open a movie file in WMP. If you close WMP, the file continues playing (in audio at least). Disconnect the device, no problem.

Works now
Hi,
I had same problem.
I was using Zone Alarm and after I configured it right it worked.
I had to upgrade to pro
Microsoft has got a nice page that explains it for different firewalls.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
I do not really understand why it does work now when it didn't when I just diabled the windows firewall or later the ZoneAlarm firewall. But it works now.
Greetz,
Pfeffa-rah

I also had all kind of troubles trying to sync via USB. Now I sync via BT and it works pretty well so far. No need to disable the firewall, no hanging, etc. But I only sync the Outlook stuff, no files or favorites.

Bogus said:
I had the same problem also some weeks back. It ended up being due to the software firewall I am running (sygate). I've discovered that I have to completely exit the firewall app (rather than just allow all traffic) if I want to sync properly - a real pain!
Based on a bit of hunting I've found out that the activesync connection works by creating a software USB - tcpip bridge. The first step on connecting the win mobile is to assign an ip address to the connection. This proceeds ok with the firewall app running as it works via the normal DHCP port numbers. Once this is done activesync knows there is a win mobile machine connected and starts trying to commumicate with it ( connected..... looking for changes). The problem now is that the communication between activesync and the machine occurs via different ports number *which are blocked by the firewall app*. This also explains why you can't sync when you have a VPN active - the VPN blocks the traffic from the 'extra' local address created by the activesync DHCP request and activesync consequently can't tell the win mobile is attached.
What I don't understand is why if doesn't work when I tell the firewall to "allow all"! There is a document on microsoft's site explaining how to go about setting up a firewall to allow this traffic (google for 'activesync firewall problem'). Problem is that it doesn't seem to work with the sygate firewall as far as I can tell...... any ideas anyone?
Click to expand...
Click to collapse
First of all you have to open the ports in the sygate firewall like microsoft describes (http://www.microsoft.com/windowsmobile/help/activesync/sygate.mspx)
For getting the synchronization to run with the sygate firewall it seems to be necessary to change the maximum tcp ip packet size (MTU).
You have to change the RNDIS driver settings in the mobile phones registry as well. Use a regedit tool like PHM Registry Editor:
Here are the settings to be added (or to be changed respectively):
Key: HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\RNDIS
Name of the Value to add: MTU
Type : DWORD
Data: 1514 (Value is Decimal)
Name of Value to add: MaxOutTransfer
Type: DWORD
Data: 1642 (Value is Decimal)
After a reset my Prophet (XDA Neo) synchronized well with active sygate firewall!

had the same problem
I had the same problem when i first got my mda. It didn't even work off the bat. I noticed it was my computer because i tried it at work and it worked perfectly. I called everybody and tried everything you can possibly imagine. In the end i said the hell with it and i reinstalled my OS. Now its working like a charm. Don't what caused it but I haven't had it since.

firewall
I had this same problem and i had to go open up some ports in my windows xp firewall, once i did this, it worked just fine.
if you read the trouble shooting steps that come with the program it tells you that.
-Chuck

getting Win XP Pro to recognize my device...

This is probably really remedial but I'm a Mac user so it's foreign to me. I had an Imate Jam working great with Active Sync 3.8 on Win XP Pro.
Now I have the MDA and have installed Active Sync 4.1 (even tried 4.2). When I plug in the MDA, Windows makes the 'donk' sound to advise something's been connected but it just shows a 'Generic RNDIS' device connected and the add hardware wizard says the device cannot start (yes it's turned on).
I don't see any drivers on the T-Mobile CD that came with the product....is there something else I have to do to install this thing so Active Sync recognizes it?
<edit> I've attached a picture of the hardware manager...
When I uninstall the driver and re-plug in the device, it's immediately recognized as a Windows Mobile-based device but then I get the error: "A problem occured during hardware installation. Your device may not work properly." This happens each time I try it, even after a restart.
thanks,
Tim

hi buddy
i've had that XPerience when i've connected my brand new prophet (o2 xda neo) to my pc via usb 2.0 hub. i was going nuts, because all older partnerships to devices i've established before i've bought the hub did work... if you do the same - change it! at least one time you should connect the ppc directly to an available usb connector on your pc until you have established a partnership. also i would recommend to install active sync 4.2 beta (use the search here to find the link), it fixes some connecting trouble... let us know if any of these tips helped at all or if you found your own solution...
cheers, lutz

Try disabling your firewalls these are the usual culprits to stop syncing. You can add activesync to the list of acceptable programs if you use something like zone alarm firewall etc.. I have the windows firewall disabled.

Thanks for the suggestions. I've tried connecting directly to the USB port -- no dice. I only have the Windows Firewall which was already showing ActiveSync as an allowed application but I turned it off and still nothing changes.
The device manager reports:
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
The troubleshooter basically instructs me to delete the device and try again, which I've done a dozen times, restarted both phone & computer. Still nothing.

Another trick that worked for me, if you have a network socket even if you dont have a network cable attached, enable network connections on your computer and try again. Whenever you change settings on your computer uninstall activesync and reinstall it. Hope that helps.

AS not connecting
For some reason, I had to repair/re-install AS. After re-booting, XP Pro/AS 4.2Beta recognized the Wizard again (Cing 8125) as all was well.
It's been stable the past few days, I think because I'm not trying to sync at work (I just cancel and use Guest).
Not a great answer, but good luck...
paul

Thanks, still no go. I do have an active Internet connection. I'm not so sure this has anything to do with ActiveSync as the computer doesn't even get to a successful install of the hardware....it always says a problem occured and the hardware may not work properly.

Succes...almost. I left the phone plugged in and restarted (after deleting the hardware profile) and when the PC rebooted it made that oh-so-sweet ActiveSync connected sound. Then AS quit and I was back to where I started in the post before....doh!
Just for kicks I plugged in my old Jam and it worked just fine, the hardward was recognized right away.
This leads me to believe something may be hosed on my MDA? Weird because it charges fine and everything else is great...it was a brand new unopened box from the local T-Mo retailer.
Hmmm...

BNDIS Connector
Guys,
Not sure that this is the solution, but this is what happened to me too. The way that Active Sync 4.x talks to a WM5 device is as a network device, not a USB device as in WM2003/Active Sync 3.x.
So, what you need to do is make sure that your PPC, which when connected to the PC shows up in the Device manager as a BDNIS network adapter, is to ensure that the BNDIS connector has an IP Address.
The easiest way to do this, connect the PPC to the PC and here the ping sound.
Right click on the My Network Places icon and select Properties
In the Network Connections Window, select Views > Details.
Find the Network Adapter that has the Device Name of the BNDIS connector.
Right click on this Network Adapter
Ensure that Internet Protocol (TCP/IP) is checked.
My guess is that it is not checked
If it is, check the properties for the Internet Protocol (TCP..) and ensure that DHCP is selected.
Hope this helps -

Re: BNDIS Connector
jkossowsky said:
Guys,
Not sure that this is the solution, but this is what happened to me too. The way that Active Sync 4.x talks to a WM5 device is as a network device, not a USB device as in WM2003/Active Sync 3.x.
So, what you need to do is make sure that your PPC, which when connected to the PC shows up in the Device manager as a BDNIS network adapter, is to ensure that the BNDIS connector has an IP Address.
The easiest way to do this, connect the PPC to the PC and here the ping sound.
Right click on the My Network Places icon and select Properties
In the Network Connections Window, select Views > Details.
Find the Network Adapter that has the Device Name of the BNDIS connector.
Right click on this Network Adapter
Ensure that Internet Protocol (TCP/IP) is checked.
My guess is that it is not checked
If it is, check the properties for the Internet Protocol (TCP..) and ensure that DHCP is selected.
Hope this helps -
Click to expand...
Click to collapse
This happened to me too. ActiveSync 4.1 worked perfectly until my WinXP Machine crashed and I had to reload.
When I reloaded, ActiveSync acting in the same manner.
I'll try this tonight and see if works for me. Hope so.

timskrastins said:
This is probably really remedial but I'm a Mac user so it's foreign to me. I had an Imate Jam working great with Active Sync 3.8 on Win XP Pro.
thanks,
Tim
Click to expand...
Click to collapse
You can still use your mac & missing sync 2.5 alpha & for most things it will work fine, but functionality is limited & sync only via BT. - it does ical, Address Book & tasks & time sync. & you can also install programs & documents as well. for media I just copy the songs straight to my mini sd card via a card reader.
Some programs will only install via windows, but as I have an intel iMac I run windows as well & activesync so far works well for me, but I have to disable the contacts/tasks/calendar or I end up with dupicate entries etc.

jkossowsky - awesome info. The problem I'm having is that the device does not show up in the network adapters. When I plug it in, it tells me there was a problem with the device and it could not be started.

Device Recognized
You need to install Active Sync 4.x before plugging in your device.
So, to be really really safe, go to Device Manager, look at the Unrecognized Devices section, find your unrecognized device and right click on it and remove it.
Install Active Sync 4.x
(if you already installed it, uninstall it, reboot and reinstall it again)
Once it is installed, plug in your device and it should be recognized as a Network Adapter.
If Active Sync does not automatically find the device, follow the instructions from my post above.

Uninstall Activesync, reboot, Reinstall Activesync, Reboot, plug in device.
pray
if that fails, attached are the proper INF files, manually update them to this, and see if that helps.

Thanks for the info, I'll give this a try. The thing that really killed me is that my old iMate Jam connected fine during this whole ordeal.
I exchanged the Wizard for a new one and still had the same issue. I finally tried syncing it on a new laptop running Win XP Pro and was able to get it to connect.
I'll try the suggestions above on the previous machine to see if I can get it to recognize the phone. Atleast I know the phone is not defective now.

Darn, no dice on that manual driver install...I get 'the specified location does not contain information about your device'

timskrastins said:
Darn, no dice on that manual driver install...I get 'the specified location does not contain information about your device'
Click to expand...
Click to collapse
try this;
http://forum.xda-developers.com/viewtopic.php?t=51649&highlight=

Hmmmm....
You may want to have a look @ support.microsoft.com
There's an issue with 4.x ActiveSync [AS] and Windows Firewall. Even though AS is listed in the exceptions, it doesn't work properly......
See here.......... http://www.microsoft.com/windowsmobile/help/activesync/default.mspx

I had this also - bugged me for weeks.
I found that the AS suite I downloaded from the MS site - regardless of version - would never find the Wizard. Only when I installed the version on the CD that came with the dvice would it connect - even though I think it was only AS 4.0.
Although I imagine you've aalready tried the CD version if you have one...

Man I am pissed I can get my Dual to talk to my PC

Everytime I try and sync my Dual I get the messge "To synchronize this device, you must install Activesync 4.5 or newer on your desktop computer". I have been all over the internet looking for a solution but nothing works. I have installed the newest version of Mobile Device Center and updated, unchecked the usb to pc box under connections, nothing works. Can someone plese help me out.

which OS are you using in your desktop pc?

worth a try
1/turn on the speaker volune of your pc + make sure in connecton setting allow usb setting is ticked
2/connect the phone do you hear a sound on connection?
3/does connecting the phone open up the software? if so what happens next?
4/do you have a firewall installed on your pc if so switch it off and try and reconnect the phone this is only for syncing if you are going to use internet sharing then switch back on the firewall/antivirus as it will not affect the network connection
5/if you want to sync with the firewall switched on go to the manufacture of your firewalls(i.e mcfee/norton) website and under support you will find configuration info relating to activesync and firewall software,otherwise do a google search for configuring active sync with your firewall (i.e norton,mcfee)
6/if still no luck try installing the active sync software on another pc and try syncing
7/ what operating system are you using

Yes, check your firewall settings. Had the same problem with NOD.

well i couldnt get it to sync so i just said screw it and reformatted my laptop then did all updates then tried to sync and it worked fine.