Dead touchscreen, need help thx - 8525, TyTN, MDA Vario II, JasJam General

Hello
My touchscreen is dead.
I can't calibrate it correctly, most of the time i can't calibrate it at all....
I have to replace it but i can't do it overnight.
My big problem :
I can't set the alarm only using the keyboard.
How can i do it please ? I use my phone to wake me up, it's the only thing i have for that.
Also, is there a way to set up a key to lock the keypad/touchscreen ?
Because of my alignement problem, it can click anywhere anytime...
btw, do i have to buy just the touchscreen film or the full lcd with touchscreen ?
Will it fix once and for all the alignement problem ?
Thx
Here's an exemple. See where is the pen and where is the actual line ??

Anyone ? please

if you read the Wiki this is/was a commen problem with the Hermes at one point there is lots of info there on what you can do to fix the screen issue

austinsnyc said:
if you read the Wiki this is/was a commen problem with the Hermes at one point there is lots of info there on what you can do to fix the screen issue
Click to expand...
Click to collapse
Done it all and nothing worked on the long term unfortunately

Bump
really need help to set the alarm time only using the keyboard please

Related

wizard doesn't change orientation automaticly

hi after replacing touch screen my wizard wont chang screen orientation when open to qwerty, any help please !!!
bartosz77s said:
hi after replacing touch screen my wizard wont chang screen orientation when open to qwerty, any help please !!!
Click to expand...
Click to collapse
Who did the work? You or somebody else.
Kirby
disasembling myself soldering servis guy, using htc service manual, unit was in parts for a month waiting for new screen, could that affect yhe magnets, where are they any way, apart from that everthing works fine,
bartosz77s said:
disasembling myself soldering servis guy, using htc service manual, unit was in parts for a month waiting for new screen, could that affect yhe magnets, where are they any way, apart from that everthing works fine,
Click to expand...
Click to collapse
I think that you are stuck with taking it apart again to see what you missed. Not sure where the magnets are located I have scanned thru the manual but haven't given it a real good reading yet.
Good Luck,
Kirby
i've done it 3 times already, every screw is in place, nothing is missing, could that be a software problem, or keybddr.dll problem, ?
bartosz77s said:
i've done it 3 times already, every screw is in place, nothing is missing, could that be a software problem, or keybddr.dll problem, ?
Click to expand...
Click to collapse
Whoa 3 times you are an expert at taking the thing apart at this point. I don't have any other ideas but with any luck somebody will give you an answer. Sorry i couldn't be more help.
Kirby

Screen problems...! help!! :(

I have a problem with my herms 200...
it's my toutch screen... it doesn't work, evry time i touch the screen it open the windows bar, if i touch in the clock it opens the windows bar... i already try the calibration option, but it doesn't work too... i touch in the 5 point like it ask and it apears again, i touch the 5 points and it apears again, and again, and again...
what can i do??
pleass someone help me!
ps: i already try to update but it doesn't work too...
thanks...
ASGM
You have to take the unit apart, and re-seat the screen. It's a problem affecting me too.
Or the digitizer's about to die, You may need to replace the entire LCD. Happened to me too, started with little alignment problem that ended with no touchscreen...
Take my advice, download remote screen alignment. It allows the alignment info to be recorded to the pc so you can skip the alignment procedure after flashing a rom.
You can navigate by buttons for most things but its a *****. This is a stopgap so you can use your Hermes until you replace the LCD...
Cheers...
ultramag69 said:
Or the digitizer's about to die, You may need to replace the entire LCD.
Click to expand...
Click to collapse
I just installed my repacement screen last week. Can you post the link to the remote tool that you use?
Nokia 3650 said:
You have to take the unit apart, and re-seat the screen. It's a problem affecting me too.
Click to expand...
Click to collapse
I have seen this web site: http://inuchanbt.blog54.fc2.com/blog-entry-100.html
I have done everything there's asking to do, but that haven't work... now i have uploaded a new OS version to my herms and a can turn it on, cause i need to align the screen and i cant do that... :HELLLP:
I have uploaded a movie on youtube, with me trying to align my screen after turn on my herm... http://www.youtube.com/watch?v=TiHXEOPHPq8
thanks a lot.
ps:sorry about my english... im portuguese.
ultramag69 said:
download remote screen alignment.
Cheers...
Click to expand...
Click to collapse
Try google...

Please help, white screen issue!!

Hi all,
I'm real frustrated at the moment with my i-mate jasjam branded hermes 100.
It started a couple of days ago when my screen would get all glitchy. I ignored it. Then i got it whenever i put pressure on certain parts of the casing and now from that it manifested and it does it whenever i hold it in a certain position etc... It's really starting to tick me off... 1300 dollars for this? has anybody experienced this issue? ive heard it's a hardware problem... im running shamanx windows mobile 6 ultimate rom...
I need my phone to keep in contact with some real important people.. any ideas?
BUMP
BUMP
howcome some other dude with a similar problem got replys instantly?? he didn't even use tags can anybody pleeasse help me???
Gr33kJag said:
BUMP
howcome some other dude with a similar problem got replys instantly?? he didn't even use tags can anybody pleeasse help me???
Click to expand...
Click to collapse
He may have been lucky. Here we re-use threads and there have been quite a few on the white screen problem.
Here's one of the main ones - I suggest you look at the suggestions about placing a pad on the D-Pad chip:
http://forum.xda-developers.com/showthread.php?t=321163
Mike
Ohk
ohk sorry but the buttons do work perfectly fine it's only the screen... also the usb port is loose so whenever i need to charge i need to push it in a particular way so i just place it on its face upside down to charge and i use an ftp program to get files off of it insstead of usb >-< it was a really nice phone till it started doing this and cbf sending for repairs il just buy a new phone when i get the money and yeah if i decide i might try something that requires opening it up but i just cbf
Gr33kJag said:
ohk sorry but the buttons do work perfectly fine it's only the screen... also the usb port is loose so whenever i need to charge i need to push it in a particular way so i just place it on its face upside down to charge and i use an ftp program to get files off of it insstead of usb >-< it was a really nice phone till it started doing this and cbf sending for repairs il just buy a new phone when i get the money and yeah if i decide i might try something that requires opening it up but i just cbf
Click to expand...
Click to collapse
Well, the reason to pad the D-pad chip is because the d-pad circuit board is the one that the screen connector connects to and the chip is the one that processes the screen signals. So although your buttons work fine, it is still that board that causes the screen whitening.
The usb port sounds like the anchoring solder joints may be cracked. These can normally be resoldered.
Mike
Hi Gr33kJag,
Try to perform the solution provided by mikechannon only if u can assemble and de assebmle ur pda very accurately, because the pros and cons of that method are describle in that page.
This solution worked for me at least and i am very much thankful to mike for giving me solution to that problem.

Touch screen not working.

Hi all,
First of all let me appologise for my bad english.
I have a G1 and yesterday after i called someone the touchscreen stopped working.
Now I tried a few things to test if it was really not working
- flashed a new rom to see if it was the rom
- used a backup when it was working.
- Reset the phone.
Now I opened the G1 and noticed the Flex Cable has a little tear in it.
At first i thought that was the problem, but i dont think that cable breaks that easy if you make a phone call.
(I reassembled the phone and the lcd screen is working and all but no touchscreen)
So i was wondering, is it common of the touch screen just stops working?
And is there a way to test the touchscreen?
Many thanks,
MacWell
I'm sorry if i posted this in the wrong place or if this already has been answerd, but i couldn't find it with the search button.
not sure if this helps but if you have a screen protector, than remove it.. try cleaning the seams... not sure if it will help but i read a few posts saying it helped others...
ldrifta said:
not sure if this helps but if you have a screen protector, than remove it.. try cleaning the seams... not sure if it will help but i read a few posts saying it helped others...
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
I do not use a screen protector.
I ordered a new G1 flex cable and I hope this will fix the problem.
However if it doesn't fix the problem I think i'll buy a new touchscreen for the G1.
But if anyone has an idea please tell me

G sensor problem?

So guys..my phone doesn't respond anymore. It was fine all along until today, I can't press on anything on the screen.
I can only get into clock recovery only, nothing else I can do.
Is there a file that can fix this issue???
Thanks.
It looks to me like a touchscreen issue and not related to G sensor...
same thing happened to me it just suddenly touch is not working cant even unlock the screen but the hard keys still works...
does this mean its the end of flashing on my hd2?
Help please
Definitely NO, just you should replace your touchscreen, somehow a common problem for this future(former) hardware-beast(HD2)
bib*oops said:
Definitely NO, just you should replace your touchscreen, somehow a common problem for this future(former) hardware-beast(HD2)
Click to expand...
Click to collapse
thanks...
would it not be hard to find touchscreen parts for HD2 nowadays...
r_i_x said:
thanks...
would it not be hard to find touchscreen parts for HD2 nowadays...
Click to expand...
Click to collapse
Not at all, you're right!

Categories

Resources