Is it bad for the cpu of my qtek200 to overclock it? for example run it at 230mhz?
lordsinasina said:
Is it bad for the cpu of my qtek200 to overclock it? for example run it at 230mhz?
Click to expand...
Click to collapse
use the search function , you can easly overclock it to 260
over clocking issue
Hello all,
I have purchased a used prophet, unfortunately the person who sold it to me did not use it for approx 3 months, so what i did naturally is as soon as i purchased it i have up graded to WM6 Touch rom. I have activated the over clock feature which worked great.
After a few hours my battery suddenly died, it turned up that the battery needed to be changed after i purchased a new one i released my phone kept hanging and becoming slow and sluggish, i started to hard reset and re-install roms and so on, then i remembered that i have set my cpu speed before it dead to approx 65 Mhz. So i re-installed the over-clock app and set it back to 195, now it works great....
so be carefully
Related
Hi guys!
I see that my Jamin is stable at 240MHZ... what is, in your opinion, the hi stable overclock for the Jamin... ?
O2 Neo
Hi, i run my O2 Neo at 240 stable. I'll probably try even 252. It's summer so I wouldn't push it higher than that. 252 could be stable, but depends on conditions. Just try it for few days.
Running at 240 MHz, it the battery life MUCH reduced than using factory 200 MHz speed?
My opinion - 'Sligtly' is more accurate then MUCH. But i didn't measure it.
252 MHz for 2 month on my XDA Neo with JAMin ROM, without any problem. Battery life is good, did not really see any difference before and after overlocking.
Well, I have been running my wizard at 264 MHz for 4 months straight and it has never failed on me. i have it on all the time after standby and soft resets. ive also tried 276MHz for a while but i had to soft reset it almost twice a day.
BTW, increasing the clock higher than usual does not heat up your device. the most it would do is soft reset it. temperature running at 264mhz is mostly the same as running at factory speed. (well for me it has) dont know about some of you.
lsnizzle said:
BTW, increasing the clock higher than usual does not heat up your device. the most it would do is soft reset it. temperature running at 264mhz is mostly the same as running at factory speed. (well for me it has) dont know about some of you.
Click to expand...
Click to collapse
How do ya measure the temp?
cellchamp said:
How do ya measure the temp?
Click to expand...
Click to collapse
Xbar can do it
Overclok on Dopod 818pro
Guys, my device is Dopod 818pro, and i was using OmapClock.exe to OvClock my processor, but, when the first time i run this program, the clock speed, says 264 Mhz? is it supposed to be the correct Processor Speed?
I got confused as i read anywhere else that the default factory speed is only at 180 Mhz.
But why is it my device gives me a 264 Mhz on Clock Speed?
also i've tried all the guides and tricks to keep my Clock Speed at certain number (eg. 216 Mhz). such as using a MemMaid and etc. but still, i always got the number 264 Mhz and it won't change at all... neither after soft-reset nor stand-by.
Anyone got the same problems?
I forgot to mention, when the first time i bought this 818pro, i felt that my device run very fast, even faster than my friends HP 6828 and ATOM PURE. Did i get lucky or sumthin'?
Everything on my device is still on factory setting...
i removed the OmapClock and Other Utility Software..
also..... there is one more sw.... 'Pocket Hack Master' from http://www.antontomov.com.... have a look whether it has compatiblity with URs.....
might be helpful.....
Mine has been stable at 240MHz for 2 months so about 6 weeks ago I bumped it to 252MHz and is stable since.
Nir
thanks! :wink:
Re: Overclok on Dopod 818pro
p12a said:
Guys, my device is Dopod 818pro, and i was using OmapClock.exe to OvClock my processor, but, when the first time i run this program, the clock speed, says 264 Mhz? is it supposed to be the correct Processor Speed?
I got confused as i read anywhere else that the default factory speed is only at 180 Mhz.
But why is it my device gives me a 264 Mhz on Clock Speed?
also i've tried all the guides and tricks to keep my Clock Speed at certain number (eg. 216 Mhz). such as using a MemMaid and etc. but still, i always got the number 264 Mhz and it won't change at all... neither after soft-reset nor stand-by.
Anyone got the same problems?
I forgot to mention, when the first time i bought this 818pro, i felt that my device run very fast, even faster than my friends HP 6828 and ATOM PURE. Did i get lucky or sumthin'?
Everything on my device is still on factory setting...
i removed the OmapClock and Other Utility Software..
Click to expand...
Click to collapse
Try installing the demo of sktools - its the only program I know that shows the true processor speed.
i did over clock to my device into 240, and it's works normally, but i don't know how to know that my overclocking was success or not, where can i read the speed of processor after overclocked?
rGrds
-wisnu-
how do i keep my device permanently on at a certain speed thgough omapclock?
also i would like the overlock to work at the set speed even after soft resets. Is this possible?
cellchamp said:
how do i keep my device permanently on at a certain speed thgough omapclock?
also i would like the overlock to work at the set speed even after soft resets. Is this possible?
Click to expand...
Click to collapse
Yes you can 2 simple methods here
1. Using omapclockplus - see here http://forum.xda-developers.com/viewtopic.php?t=56057
2. Use batterystatus plugin - displays Mhz on today screen and has omap functions inc device wakeup overclocking see here http://forum.xda-developers.com/viewtopic.php?t=55782
You could also use smartskey or notification queue method but above methods use easy install cabs.
median said:
My opinion - 'Sligtly' is more accurate then MUCH. But i didn't measure it.
Click to expand...
Click to collapse
Just tried - I agree, there is no big difference in battery life - similar autonomy than factory settings when running at 240 MHz...
Hi,
I really don't recommand to overclock the prophet over 240mhz.
I overclocked my first prophet @252mhz.
I had no crash problem with this overclocking, but it burned the bluetooth chipset.
Now i have a new one and have a permanent overclock @216mhz, and sometimes i overclock it @240mhz, but usually it' only to do some tests!
The 216mhz is more than enough to do what i want.
Bye
Herc. 8)
i know this might b a stupid question and a question that has been asked alot... i did a search and couldnt find an answer but my question is what is the highest you overclocked your phone and it was stable? im currently running at 240 stable and im sure this will answer alot of questions for anybody who is new to overclocking thx in advanced
dont really think that that many people push it to the max
as both ram speed and sd ram interface being a much bigger bottleneck then cpu
so overclock is more likely to cost precious batt time then anything usefull
I've noticed that my MDA becomes unstable after 230 or so. I'm using an old 1.08 IPL/SPL rom if that has anything to do with it. I have Battery Status so I just use the CPU scaler and it works pretty well.
I'm running @ 232 and have been for months with no noticeable additional battery drain. Running a more-or-less stock WM5.
When i have some high quality video files or a bit more complex software that wizard can't handle at standard frequency (like quake), i run it @260MHZ without any problems. I went up to 273MHz a few times, and it worked fine with TCPMP, but i never used this setting for more than about 20 minutes. When i used different programs (not only the video player) and switched between them (read: normal pda use) i had a few system frezes @273MHz, so i don't consider it a safe setting
I use Battery Status to scale between 147 to 247 with boost set to 260. I have never once in 4 months had it lock up. I use a very stable rom though so that has to help. When using other less stable roms I was getting lock ups often.
Jeff
what is the highest that the wing can be overclocked and what would be the best program to do so?
rastlin said:
what is the highest that the wing can be overclocked and what would be the best program to do so?
Click to expand...
Click to collapse
You are prob going to be slammed with 'use the search feature', but, I'm bored as hell at work, so I thought I'd help.
You will find many people use different speeds, and different programs. The two I've used are batterystatus and Omap. Personally, I like batterystatus, and I've safely clocked mine to 299mhz.
BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .
buru898 said:
BatteryStatus? Isn't that way old?
I highly recommend HomeScreen Plus Plus (which is the new version of Battery Status) just google it and you'll find it and download the Advanced verson not the Basic one.
And I safely overclock it to 299 with no problems. I went to 312 once but every so often the phone would rest itself.
HS++ is also good cause it auto underclocks and auto overclocks your device so when your phone is sleeping it saves battery .
Click to expand...
Click to collapse
+1000000 this is awesome man! thanks
i want to thank everyone that had responded i did a little research and i was confused. ya see i am using batterystatus .04 and if i go above 260 my phone freezes and to be quite frank i had 2 wizards that i believe died from overclocking. they both one day randomly after a reset went to the bootloader screen and stayed. i had tried a hard reset and flashing the unit with no luck personally i dont have a clue what happened and with this one being my only source of 'net access i cannot mess it over once again thank everyone whom responded
-rastlin
Hmm wow I'm sorry for your Wizard but the Wings can go up to 299mhz without dying and the good thing about HS++ is that if you enable CPU Scaler and set the overclock to say... like 400 and your phone freezes, just plug in your charger and reset your phone. The CPU Scaler is disabled as long as you have a power cord plugged in your phone (your phone stays on it's native speed) so you can just go back into the CPU Scaler overclock settings and lower it and try again ^_^!!
So just use the CPU Scaler to find the highest overclock speed but never just set the overclock speed in the normal overclock menu. Use the CPU Scaler auto overclock option and you won't need to hard reset your phone.
thanks for the advice. so it is possible to kill a unit with overclocking i just wanted to be sure, cause when i asked in the wizard forms if i am not mistaken no one answered me. i had also asked hct via a number provided to me by tmobile and they said the stock "i dunno we will have to look at the unit and that will be $180" towhich i responded f**k!! that i can get a new unit for under 130 off of ebay then got a wing....
-rastlin
I didnt want to root my phone HTC WILDFIRE because I am a little noob at these things a I thought I would totally destroy my phone.
But I found out that it is not so hard to root it as I thought, so today I succesfully rooted my phone. Than I wanted to overclock my procesor from 528 Mhz to I think 768 by downloading new kernel etc... Everything went good. I succesfully installed(or what, I said I am a little noob) that new kernel and was happy that my Wildfire will be faster.
But now I can see that my phone is lagging more, sometimes it freezes what i couldnt see before when It had original kernel.
HOW IS IT POSSIBLE?
Pls help
Do you have SetCPU installed? Then turn it a bit down, till 690~710 Mhz
Maxing it totally out can make your phone unstable. Think about it like a car, when it has 100 hp's and you tune it to 150 hp's things might break.
From stock 528 to 768 isn't a walk in the park, it's +45%
Yes I have setCPU and when I set my procesor to about 710 Mhz it lags and freezes. When I set it to about 580 it is doing the same. The only one solution of this I think is to reinstal the kernel.
Now I have 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1.
That is the full name of it. And in setcpu info it shows me before the version ( 2.6.32.21-HCDRJacob-ga91 e 73b- [email protected] 1) Linux versio... Maybe thats the problem???
And I have to find some solution as fast as possible because sometimes when somebody calls me I cant answer because of a biiiig lag. And then I cant do anything.
Thx for help
What id the minimum speed set to? I wouldn't go below 160. And my max is 672mhz.
Are you running different profiles or just the main profile in setCPU? Mine used to lag when i had a few profiles running but i have removed them all and only using the main profile and the lag has now gone.
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
I tried many options and at last its OK. firstly I had a big difference between max and min of my procesor at setCPU, so I tried to set it to min about 630 and max about 700.
Now it is OK I dont know how, but I am happy the ****y problem is somehow solved and everytjing now goes very smoothly, thx u all
ephbee said:
when i went to wildpuzzle i found whatever speed i set my processor through set cpu it froze about 4-5 times a day. after flashing the kernel to remove overclocking it has not frozen in a week. everything really responsive, checking auto detect speeds with set cpu shows max 528mhz min450mhz
Click to expand...
Click to collapse
So what kernel did you flash it to?
Hi I`ve got SetCPU installed and flashed jacobs 0130 kernal so I can overclock my Wildfire.
Now I`ve got a small issue, I`ve set it at 710 max and 556 min settings and it seems to be running fine, but when the battery starts getting a bit low it causes it to freeze and have problems running some apps. I know its personal choice for how much it is overclocked but are there any recommended speeds for min and max settings to get it running well or is it just a question of experimenting until I get it to my liking?
I have searched the forums and everyone seem to have different preferences.
Thanks again Nexus04
I got random freezes using SetCPU too. I uninstalled and used OverclockWidget instead, havent had a single freeze since
Thanks I`ll have a look at that
why do you have your minimum setting overclocked? the slowest your phone can go even with screen off is 556, no wonder phone chucking a hissy fit
i'm running 691 max 245 min set on performance, not one freeze.
running wildpuzzle v.08
Thanks ephbee, thats made that clear for me, I was having a "DOH" moment there