Hi
I have written a mortscript which automatically switches the audio on my O2 Orbit (WM6) to my bluetooth car kit when it detects it, it then plays a sound to confirm that the sound has switched over - it also start TT if power is detected. When it looses the bluetooth connection sound is returned to the handset and a "disconnected" wav is played. Now this works fine as long as the device is awake but not when in standby. So I would like to find a way of waking the device up when it first gets a bluetooth connection and then again when it looses it. I have looked at adding something to the notification queue using memmaid but I can't see any bluetooth actions there.
Can anyone help me??
anyone?????????????
Related
Hello,
i have a qtek 2020 1.75.00 WWE
My question is as follows:
Is it possible to have the headset mode set to "enabled" as soon as Bluetooth is switched on? At this moment, i have to go to the today screen to manually touch the headset icon to enable it. So even when bluetooth is active, i still can't use my headset immediately. When the phone rings i still have to go through the above mentiond manouvre, so by the time i have done that, the phone already stopped ringing.
So what i actually want is that the headset mode is either always enabled or that it gets enabled as soon as bt is active.
I hope you can help me.
Regards,
Ilana
Hi Ilana,
On my i-mate (XDA II) I run Pocket Bluetooth Tools (or BTHTools) which you'll find on XDA Developers if you search for it, and aside from adding additional profiles (such as the missing SPP - Serial Port Profile, which is needed to connect to Bluetooth GPS units), it also replaces the default Headset Profile app with an automatic one.
When the phone is activated by an incoming or outgoing call, the Bluetooth radio turns on automatically & I just tap the BT headset's answer button to transfer the call to the headset. When the call finishes the BT radio automatically turns off again after 60 seconds (thus saving battery power).
Give it a try - you can uninstall it to return to the default Microsoft BT stack if it doesn't ring your bell.
Lucas.
Thank you for your help. I will definitely give it a try!
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...
Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.
so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..
Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.
Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.
GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.
Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.
Hi,
When I bought the phone in November it had serious problems with bluetooth, it was turning on off and disconnected the headset during or especially after phone calls.
That is absolutley not ok and I am using SE's top of their line headset: DS-980
These massive problems with BT exist also after firmware upgrade to R2A - The phone handling seems smoother than before, there are little improvements like a battery symbol on the top bar, another BT symbol, but it seems that some bluetooth problems still exist.
Just minutes ago, the phone disconnected from GSM/GPRS/UMTS line and connected again while I was using headset and was listening to music through WM player - then the phone suddenly restarted !!
I think that this is not the problem with the compatibility of this headset only, I did not try others but I think it will make same troubles with them too.
BT BUG in detail:
* Connect / Disconnect Phone when using headset intensive
* Headset (DS-980) especially disconnects after phone calls
* BT icon dissapears sometimes -> then it has to be switched off and on again to work "properly"...
SO MY QUESTION: CAN SOMEONE CONFIRM THESE BUGS/PROBLEMS ?? Is it the headset or a bug in phone (hardware or firmware ?? )
Thanks,
Freako
I have almost the same problem with my Volvo XC70's built-in hands-free - phone randomly disconnects from car in standby mode as well as during phone calls. I found some solution but haven't tried it yet - there is a program which stays in memory and checking BT status - if it's OFF the program restarts it.
i´ve the BT Headset Ds980 too but not such problems...
but beforce the update i had problems with calls...i couldn´t answer them with the headset...if i accepted them with the headset, i had to use the phone... the device did not stream the voice to the headset but now every thing runs "perfect"^^
I use a2dp a lot with my car stereo.
Every day the phone connects to the car in handsfree mode and doesn't connect a2dp too.
so I've been running a2dp toggle each time I get in the car, and every time I complete a call (the phone disconnects at the end of calls, and reconnects only the phone part).
I've found an app that can search for devices at fixed intervals or when the device is woke up and if the selected device is discovered it will run a set app. This is an ok solution, but probably not too great for the battery.
The ideal solution would be to set the phone to always connect to a2dp on any devices it connects to, or an app that runs whenever a bluetooth connection is established (ie the handsfree connection) and would run a2dp toggle.
Does such an app exist?
- Anthony
BTMusic 1.0
BTMusic is one that helps a lot. http://maxmobilesoft.com/index.php/software/btmusic
You could take a look at this.
http://forum.xda-developers.com/showthread.php?t=502549
Hello.
I've a problem with Bluetooth call on my phone (stock rom) . All works great but since a couple of days I can't receive or make some calls with any Bluetooth device ( headset handfree, car audio etc). Media like music or icoyote (set in a2dp notification o media) works great.
I've reset all, car audio, phone. Nothing changed. I've installed spectrum mm rom, I've the same problem.
When I open Bluetooth device properties I can't activate the option for call and notification.
Do you have any idea for solve this problem?
Hello and up! Anyone have an idea to solve my problem? I've reset the phone 2 time and it works great for 2 week and now it don't work. I can't made a call with the Bluetooth
bluetooth doesnt open?can u send-receive files?
Hello. Bluetooth works. I can play audio like mp3 on hands-free and car audio. I can make phone calls on car audio but sounds of call don't go on car audio. On the phone I can't check made call on Bluetooth
I've tested the last spetrum's modem. All works great after each reboot but just one time.
When I enable the bt for the first time after rebooting it connect and call phone option was activated. When I enable it the second time it connect but call phone options was disable and if I tried to check it I can't.
the only issue that I have from the bigining..is that many times although b.t connects,it doesnt transfer sound to my plantronics M55 b.t headset.then I just turn off-on my headset,it reconnects automatically and sound is being transmited normally..
I solved the same problem with this thread
https://forums.lenovo.com/t5/Moto-X...less-bluetooth-headset-for-phone/td-p/3652038