Is there a way to setup a profile for my phone. I like to profile's: 1 in car, 2 outside car.
If my profile is "in car" and when i pickup the phone, he must switch automaticly to handsfree (speaker on).
yes
I have been looking for an answer on this too
On my Himalaya, my BT carkit does exactly that. It's paired as a Headset and thus autom. diverts the calls to it whan there is a connection (BT on and Carkit on)
I believe if you use the BT to answer the call it will route to the BT. If you use the phone to answer, it will use the handset.
I have the pioneer BT70 radio with intergrated BT carkit. Couldn't get it to auto connect (nokia does). Installed PocketZen and set the Car profile to autoconnect headset on incomming or outgoing call. It works about 90% of the time.
Like the PocketZen. But use it only as a way to turn on and of my BT to save power and to have the different profiles. Configuring the programm (saving settings) is f***ing slow! Switching is fast
Bluetooth audio streaming is not connecting automatically to my car kit (a Parrot MKi9200). The phone connection always sets up automatically as soon as I turn on my car's ignition, but the BT audio streaming never does. To make BT audio streaming work, I have to activate it manually in my phone's menu, each time I start my car. That's just too much on working days where I sometimes get in and out of the car frequently.
Both Parrot and HTC have told me that this functionality simply isn't there in the phone. Other phones can connect automatically, but not this model, so they say.
Is there a work-around? For instance, is there some sort of software utility that could help me automate the establishment of the BT audio streaming connection?
I find that on WM6 you have to reconnect manually in the comm manager to get AD2P to activate. But in some WM6.5 roms (most probably) like the EnergyROM I am using now the AD2P is very responsive and reconnects just by pressing play in HTC audio player even if stopped during the bluetooth connection to your car stereo/kit.
I have tried many AD2P auto software enablers but they eventually just remove the functionality alltogether and has me reflashing the rom. =/
I would suggest either to go with a 6.5 build or just make a habit of reconnection to the BT manually via comm manager if you want to stay with wm6
I have the following problem when connecting the HD2 with bluetooth to my car stereo:
The car stereo is capable of BT-phone (Hands-free) as well as BT-audio (Stereo Audio) connection. The connections are made automatically (connections are set and authorized) indicated with two different symbols indicating each connection.
The following occurs:
A. When connecting the HD2 for the FIRST time to this stereo, both BT-phone and BT-audio do connect automatically. This can be monitored by the two symbols on the car stereo, and also in the bluetooth connection monitor on HD2.. both Stereo Audio and Hands-free are connected, indicated by the green arrows.
B. When connecting the HD2 again (so anytime but first time), ONLY BT-phone does connect automatically!
The BT-audio connection I can connect when I need to, but this can be done only manually in the bluetooth settings on the HD2 by ticking the Stereo Audio entry.
In case B it makes no change if I check or uncheck the "Connect seperately to Bluetooth hands-free and stereo audio services" checkbox in the connection properties on the HD2. Makes no difference.
Also, a normal stereo bluetooth headset connects both BT-phone and BT-audio at all times,
So for the car I would like to also have Stereo Audio connect automatically too (like Hands-free). For the HD2 I have tried several ROMs and several soft/hard resets to make sure it is a problem which always occurs..
Why does the car stereo only connect both services the first time the connection is made, and afterwards only the phone handsfree service?
htc12345 said:
I have the following problem when connecting the HD2 with bluetooth to my car stereo:
The car stereo is capable of BT-phone (Hands-free) as well as BT-audio (Stereo Audio) connection. The connections are made automatically (connections are set and authorized) indicated with two different symbols indicating each connection.
The following occurs:
A. When connecting the HD2 for the FIRST time to this stereo, both BT-phone and BT-audio do connect automatically. This can be monitored by the two symbols on the car stereo, and also in the bluetooth connection monitor on HD2.. both Stereo Audio and Hands-free are connected, indicated by the green arrows.
B. When connecting the HD2 again (so anytime but first time), ONLY BT-phone does connect automatically!
The BT-audio connection I can connect when I need to, but this can be done only manually in the bluetooth settings on the HD2 by ticking the Stereo Audio entry.
In case B it makes no change if I check or uncheck the "Connect seperately to Bluetooth hands-free and stereo audio services" checkbox in the connection properties on the HD2. Makes no difference.
Also, a normal stereo bluetooth headset connects both BT-phone and BT-audio at all times,
So for the car I would like to also have Stereo Audio connect automatically too (like Hands-free). For the HD2 I have tried several ROMs and several soft/hard resets to make sure it is a problem which always occurs..
Why does the car stereo only connect both services the first time the connection is made, and afterwards only the phone handsfree service?
Click to expand...
Click to collapse
i have exactly the same problem! any suggestions on this would be appreciated
+1
using fiscon mobile.
at the same time i have quality issues (no bass or low sampling rate). but i guess this is a fiscon problem? it was the same with my previous i-phone.
Audio quality is fine here. Is the connection issue a Windows Mobile bug?
htc12345 said:
Audio quality is fine here. Is the connection issue a Windows Mobile bug?
Click to expand...
Click to collapse
on a fiscon? are you using a fiscon as well?
I don't know if this is helpful, however I have an IO Play system in my car and it connects automatically everytime for both handsfree and audio streaming.
Works fine for me with my Lidl (!) Silvercrest car stereo. But for me the HD2 has to be playing audio/music for the Bluetooth streaming to work.
FYI - my car stereo is an Eclipse 3200
Have the same issue with A2DP Bluetooth headphones/handsfree.
While the device recognised it as Bluetooth stereo and handsfree and on a first connection both connections are active in device profile, on any other connections only handsfree connects authomatically. And I need to mannually connect stereo in Bluetooth manager :/
Same here :S
Every time i connect my Nokia BT Headphones " Hands free" connects automatically and "Stereo audio" not
I also have exactly the same problem. only BT-Phone connects, not BT-Audio.
I have a Sony headunit. Seen as I guess we all have different headunits in our cars, it must be an issue with the HD2 not the stereo.
archvile77 said:
on a fiscon? are you using a fiscon as well?
Click to expand...
Click to collapse
I have a Sony car stereo.
Same here except in my case I have a cheapy Tevion (Aldi) headunit. This is a real pain in the neck if you stop and turn off the engine of the car because then I have to reconnect BT Audio again
Correct me if I'm wrong, but I think this also happens with A2DP stereo headsets with combined audio+HF.. Don't know why though..
Had this problem with my HTC Diamond, and now with my HD2.. Search for "A2DP Toggle"..
It defintiely happens with some A2DP headsets - I have a Sony headset and it happens on that. You have to manually connect A2DP profile each time.
We need an A2DP toggle for the HD2 Widcomm stack ...
Mark
I have a Sony headset which connects both BT Audio and BT Phone together, and a Sony Car stereo which connects only BT Phone.
I have the exact same issue with my JVC car head unit, should be able to connect to use as hands-free and stream music, but neither will retain a connection. I can't connect and pair the devices with the '000' (or whatever I choose) BT pairing code. My previous mobile worked perfectly and auto-connected as it should every time.
I submitted it as a support request on HTC (UK) site, here is my response:
Thank you for your enquiry.
The Bluetooth accessory you have mentioned may not be fully compatible with the HTC handset so may have limited features to be used with the device. For example you maybe able to pair it but other faults may occur. Please keep an eye on our website for any future updates such as Bluetooth patches and ROM upgrades. We cannot confirm if and when these may or may not become available.
As a test, you maybe able to delete all Bluetooth partnerships/devices from your handset and start the pairing process again.
Is it working now?
As an alternative solution please see compatible and recommended Bluetooth accessories in the Buy section of our website below:
(Link to 'HD2 Bluetooth Accessories' page of their website)
Please let us know how you get on and we will assist you further if and when required as a matter of urgency.
Best regards,
Mat
HTC
Click to expand...
Click to collapse
Not the response I wanted, and when I have followed up on this reply I got the same copy/pasted text response! Upon following up on that reply I think they gave up on me as I haven't got a reply this time!
Basically, they want me to go out and spend another couple of hundred £ on more equipment to achieve my hands-free (without an earpiece) requirement, even though I already have the equipment but can't make it connect!!
nniicckkss said:
Not the response I wanted, and when I have followed up on this reply I got the same copy/pasted text response! Upon following up on that reply I think they gave up on me as I haven't got a reply this time!
Basically, they want me to go out and spend another couple of hundred £ on more equipment to achieve my hands-free (without an earpiece) requirement, even though I already have the equipment but can't make it connect!!
Click to expand...
Click to collapse
HTC is getting better and better at standard responses. However there are also helpful and knowledgeable people on the other side of the communication line.
Approved bluetooth says nothing, as if they will try to test every bluetooth device in the world, even sold prior to the birth of the HD2... right.
However the problem is perhaps more WinMo related and not only HD2. But I have only the HD2 to test with..
AND WHILE WRITING... I see that also sony stereo headset is connected as BT Phone... guess we need a small tool to connect bluetooth easily.
I think its a combination of the software in the Bluetooth device and the host. My Sony headset would also require manual A2DP connection with my previous phone - an Eten. As others have posted here other Sony headsets will pair with the HD2 automatically for A2DP.
Mark
I can also confirm this "bug". Can't get my A2DP device (BCK-08) to connect (itself) as BT Stereo. Everytime reconnects automatically in HF mode. That really sucks.
Olioaglio
I don't know if this is possible or if this is a really simple question however is there a way to disconnect a hands free device in 1-2 clicks.
what happens is this, I have a BlueAnt Speakerphone in the car I get out of the car (and forget to turn of BlueAnt) walk 15m and make a call - phone is still connected to Hands-Free, so how can I quickly disconnect the hands-free and make a call through the normal phones internal speaker.
I suppose I can assigna button to be comms manager and disable bluetooth however I want bluetooth to remain on if possible (just d/c hands-free temporarily)
Windows Mobile 6.1 on HTC Touch HD
You can try this, it merely toggles bluetooth.
However, I have had the same problem as you, so decided to make my TD2 KNOW when it is in my car and KNOW when it is not. I use GProfile for this. It knows when it is in my car because it is connected to my car cradle (it is charging) which is also an FM transmitter (it thinks it is connected to a headset). This then automatically turns bluetooth on when cradled. When I un-cradle it, it turns bluetooth off thus disconnecting from my handsfree headset.
GProfile is one program which does this but you could use Mortscript instead.
I have a N6P, rooted 6.0.1 with Xposed. I use MacroDroid to automate some processes. E.g. I have a macro that enables bluetooth whenever I leave the house and my phone disconnects from the home wifi network. In my car I use a Parrot CK3100 bluetooth voice kit. I want my phone to automatically connect to the kit whenever bluetooth on my phone is enabled and I start my engine (and the Parrot becomes powered). Whenever I switch on bluetooth manually and it is on for some time and I get into my car and start the engine, my phone connects to the Parrot without any problems.
I also have a macro which actions are that a sound is played and it vibrates whenever the phone connects to my Parrot. But whenever I leave my house, I can see that my bluetooth is enabled but when I get into my car and start the engine, I can hear the sound and feel the vibration of the MacroDroid macro, but the screen of the Parrot still shows the Parrot logo and not the name of my phone. So MacroDroid confirms that a connection has taken place (otherwise there wouldn't be any sound and vibration), but in fact the phone and Parrot are not connected. Going then into BT settings and trying to connect manually works in 50% of the cases.
I have also tried AutomateIT to get this working, but with the same outcome. And the app Bluetooth Auto Connect (to force the connection) didn't bring any luck either.
Because when enabling BT manually before I leave the house the connection succeeds and when using the macro it does not (neither in MacroDroid not in AutomateIT), I suspect that it may have something to do with the (short) time between the enabling of BT and the powering on of the Parrot, but I'm not sure.
Anyone any ideas?