Database Users

SOMEBODY HELP ME PLEASE I THINK I'VE BROKE MY XDA IIi

i have an xda IIi an it say's serial v1.01 when i try to put it in the charger it say's usb v1.01 but activesync 4 will not detect it but it does connect to my pc without activesync but i can't install any thing on it. i have downloaded the original software from the o2 website but the installation instructions say it needs to be connected to activesync. what do i do

Hmm...Seem to me you are in bootloader mode serial connection version 1.01 .. Try checking the buttom. As this mode will only come if you press power+reset+navigator buttom.

i have tried soft reset and hard reset but i just can't do anything with it

chill..
download the rom image from o2 here is the link,
http://www.my-xda.com/xda2i_soft.html
put the device into bootloader and put into the cradle and let it do it's magic
simple!
PS, i problem like it i killed mine by messing up the rigistry i was screwed so i did that above and all was okay....main thing is not to panic always think u have the garuntee from o2 so u can take it back...so take it ez!

need to make my brick back to a fone plz help

cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help

If it is realy a brick without any chance of life I need a part of it: the keypad.

Thats really rude.

not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen

All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.

Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.

You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.

Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.

T-Mobile Ameo / Athena - Stuck in bootloader, won't connect to ActiveSync

I have got hold of a T-Mobile Ameo that's gone wrong whilst upgrading/unlocking, I believe they were using the Olipro way (which I've successfully done fine myself in the past) and it's now stuck in the multi colour bootloader screen which displays:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.RP00
And although it shows USB when plugging it in to a computer it won't connect to ActiveSync so I can't get to the stage where I can re-flash it.
I have tried the hard reset by holding down the volume and pressing the reset hole, and I get to the prompt:
Press ACTION to restore factory default
Press Camera Key to exit
I then press the little nipple button down and it displays:
Restore default complete
Press Power Key to boot
Press CommManager Key to format micro drive
I press the Power Key and I'm back in the multi colour boot loader back where I started, and I canot connect to ActiveSync to reflash.
Any help to turn this paper weight back into a useful device would be appreciated...

exactly the same problem here.
any guru with a solution ?

seckt0r said:
exactly the same problem here.
any guru with a solution ?
Click to expand...
Click to collapse
Hi seckt0r,
have you tried reflashing the original rom for your device while connected to your computer in bootloader? ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
another idea would be to try sd card flashing,(see the wiki) but you would need to extract an image from the flash utility.
One thing to note is you couldn't flash any of the newer roms as you are probably not unlocked

lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...

Active Sync issue is solved !!!
Active Sync 4.5 had changed the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. So it can cause problems in connecting with PPC. Try install on your PPC the "ActiveSyncMode.sa.CAB" that you can easily find on Google & run it. Hope this might help.

same problem here i tried to upgrade with orignal rom tmobile uk but its show invalid vensor what can i do plz help thnx

got your msg ahmerp but I don't use MSN
have you tried some of the other shipped roms
if that fils you could try cmone s mtty solution to rswrite the vendor id

seckt0r said:
lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...
Click to expand...
Click to collapse
Please help me to sort out my ameo problem some one flashed with with wrong rom now phone shows only volume icons and whenever i try to flash with tuk roms it always give me error invalid model id e.g

Check post 33 on this thread http://forum.xda-developers.com/showthread.php?t=387454&page=4. You MUST use Windows XP with SP2 optionaly SP3 for this to work. If you need mac file for SPL1.2 send me email.

ameo stuck on bootloader after trying to unlock with athena unlocker
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub

hafizayyub said:
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub
Click to expand...
Click to collapse
Can you post what is written on the bootloader screen?This will help define what rom you need to flash.

thanks lakeman
my bootloader tri color screen shows
I hv a new htc Athena (ameo t mobile uk locked).
I was trying Athena unlocker by olipro. I hv used this on a number of occasions and no problems.
With the present one it was on rom 1.12 tmobile uk and while doing Athena unlocker it crashed on first step.
In bootloader mode it shows
Athe100
Ipl-v1.00
Athe100
Spl-v1.10. RP00
It keeps giving invalid vendor id error 294 when I try to flash tmobile original rom
I have read olipro message who say that I can only repair this via pdocwrite. Apparently it’s the spl that’s corrupt so I need to repair this.
I will be very happy if u can help me with a step by step guide to repair the spl using pdocwrite or rswrite to change vender id.
I am using windows xp or windows 7 and I hv tried mtty and I can successfully connect to Athena and do info 2
It shows level=ff ie it is still locked cid.
Wdata also seems to work but even after password says pass I do not really know how to change the device id or vender id
Device id shows HTCS Þ?ÒtHTCE
I am told y olipro that this device id or spl can only be repaired via pdocwrite.
How can I do it..
Pls help me u can email me on [email protected] or hotmail.com and can add me so u can please provide me with a step by step guide repair my athena ameo
Ayyub

Problem with putting XDA II into bootloader.

Hello,
I wanted to upgrade my operating system on my XDA II but to do that i need to use the power button but on my phone the button is broken, is there any way to get to the serial screen such as a freeware program i can run or another way of doing it?

There is a video somewhere here in WM5 or WM6 to show you how to upgrade.
It´s here:http://forum.xda-developers.com/showthread.php?t=370752

Nice Little Tool For Entering BootLoader
Ok give this a Try it was Originally for Polaris but it works with my prophet so i am assuming it works with other htc devices ,Install the cab then run Enter BootLoader from programs\tools folder (no button pressing needed)

thkz it wrks great

help...
i cant enter the bootloader mode... i think my hima is brick when i try to enter to bootloader mode nothings happen(power dpad reset)... but when i do a hard reset(power + reset) its a whitescreen and i cant see anything... do you have any adie what to do mith my hima.. please need help... thanks

how can I Upgrade my Xda II if my camera and record button is broken?

Help, help!!!!
Certainly when upgrade from WM03 to WM06, we all must go to the boot loader option to clean registry, disable KITL, clean storage...etc . However,poor me, I have an XDAII with broken record and camera button, so that I can not get in Boot Loader ( Press ResetButton and hold down CameraButton + RecordButton )
So could any one solve this problem?
many thank!!!!

when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi

Arimbi said:
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Click to expand...
Click to collapse
yes, its because you'r flashing Radio only, if you are flashing WM5/WM6/WM6.1/WM6.5 you need to enter bootloader mode!

Me to have only record button not working
But i made it,open your phone open whole parts,now attach your battery with a rubber ring so phone can start,notice that white part which is situated near the camera which has four pines fix it with screw or until your phone boots, you need four hands either to enter in boot loader mode or hard reset.you should connect the circuit button with a metal/wire,first try that button you will see camera or record working apply same for your needs. out of that four points of button adjust three to connect toughether to activate.