HELP: my jasjar is dying!!! - JASJAR, XDA Exec, MDA Pro General

Hi all,
today i forgot my charger so the battery was 44% full and i used the mobile for a long phone call and after im done the battery was 36% after a while i wanted to make another phone call and the battery was 29% the phone was in flight-mode without any reason...
then i did restart the device but it didnt turn on....
this is not the problem...
after i went back home and did recharge the phone now the speakers and the microphone doesn't work i did HARD RESET THE PHONE AND NO USE!!!
Help me pleaaaaaaaaase!!!

i found the solution and here it is in case anyone faced the same problem...
if you were using a normal headset and after you plugged it out the sound started to break apart then do the following:
1-turn your media player on and start playing any audio file while volume is at MAX...
2-try to plug it in first and then test if the sound comes out of the headset normally...
3-then plug the heasdset out of the device (not all of it keep some of the jack inside the headset hole) do that in slow motion....yes...in slow motion and try to focus in making the sound goes out of the headset and the device at the sametime....
4-if you managed to make the sound BLOWS OUT from the speakers then the problem is because you plugged out the headset too quickly which generated a shock (actually i dont know if that's the accurate definition)
5- try to twist the headset jack left and right and plug it out gentely while the sound is still going out of the speakers...
and thats it...

Related

imate Jam loses audio, alerts, etc..

My Jam occasionally loses all sound. I mean everyting from alerts to the phone itself. It would only work if I plugged in my headset. I tried checking my headset and the contact in the jam, everything was OK.
Anybody experienced this? Does anyone know how to fix it?
Thanks.
Where are your tones placed? In the device or in the card?
I lost audio, all of it not just alerts
I think I know it. Same thing happened to my jam too.
Your jam does not recognize that u unplug your headphone.
Problem is; there's a little switch in your headphone socket, when you plug your headset it turns off the internal sound, and when u unplug it should normally turn on the internal sound. But if the switch is locked, jam does not recognize that u unplug your headphone.
My solution is, plug-unplug your headset's plug (or something thinner) several times in different angles carefully to your socket while your jam is playing something. Till u hear the sound.
Mine is ok now. And I don't use any 3. party plug adaptors anymore.
(sorry bout my bad english. hope u got it.)
I have the same problem with my MDA Compact. The plugging in and out of the headphone didn't help much either.
It's hard to tell whether it's the headphone "switch" or the external speaker that is broken. Is there a software for PPC that can recognise whether there is a headset plugged in or not? This would help identifying the problem.
I think there are 2 external speakers. One is at the back, the louder speaker. The other is at the front, active during a phone call.
If they are both down, it seems to be a switch problem.
-btw, when I was having the same problem, I lost the mic too..
Did you use only the original headset or some other plugs?
I only lost sound from the external speaker at the back. Everything else was working fine. As you correctly pointed out, if it was a switch problem I wouldn't have been able to make calls using the front speaker as the sound would directed to the headset. In my case it's the speaker )at the back) itself that is the proble. I have now sent it back for repair...
... and I have to wait for 14 looong days before I get it back, and that's excluding delivery time!

Desperate Help Needed, Audio Fault On My Wizard ;-(

well this one has me totally baffled!!
went out yesterday with my wizard and everything was fine, all audio was working prefectly! on the bus i plugged in my hands free kit to listen to a little music, that was fine..
when i got off the bus i unplugged the headset and for some reason the audio on the wizard was not working, no clicks, no music playing when i opened media player, almost as if it was on mute!
i thought to myself, maybee the speakers are bust?.. but when somebody rings me the speakers kick in and sound works perfectly! but only when people ring me,
BIG PROBLEM IS: if i answer the sound dosent work and neither does the microphone, as if the headset is still plugged in.
if i plug in the headset, the mic and headphones work perfectly for calls.
SO YET AGAIN!! I THOUGHT TO MYSELF: maybee the wizard is registering that the headset is constantly plugged in even though it isnt, or something is jammed in the headset socket.
BU NO!, if that was the case then when the phone rings the loudspeaker wouldnt be ringing too would it...
I AM OFICIALLY TOTALLY BAFFLED! have hard reset the phone 4 times, soft reset countless times!! i have no idea *CURRENTLY USING THE NEWEST QTEK ROM*
if anyone has any ideas i would be most greatfull!!!!!!! CHEERS A;LL!!!!
are u using bt ?
then try btaudio to tunnel audio through and no bt
dont use bluetooth at all, and its a good solution, but i still wouldnt have my good old audio back propperly i dont think,
there are just times when i like to sit my pone on my desk and play movies/music, or actually take a call and not have to plug in my headset everytime just to talk to someone lolol
its driving me nuts lol
ive tried re flashing the phone to its base tmobile rom, the qtek one and the o2 one now and still the same problem, so im guessing its hardware somewhere down the line.
any suggestions?
I have the exact same problem i believe and have found no solution. I didn't use the hands free set though. Just one night while charging, the main speaker stopped working on my 9100. Been like that for probably 2 months now.
Speakerphone, bluetooth headset and wired headset still work.
when wired headset is plugged in, it wont switch to speaker phone. When its not plugged in, it will, so I know its not just thinking the headset is plugged in still.
why are you complaining here ... return the device, it has warranty..
Hi
I had the exact same problem with my Magician (not had it with the Wizard yet). The problem is something to do with plugging the Handsfree kit in. when you unplug it, the little catch inside the 2.5mm hole does not flip back across so the device still thinks that the Handsfree is plugged in.
What i did to sort this was to wiggle a large paper clip inside the hole and it sorted it.
I hope this is the same problem
Thanks
Dahquim

HTC3600 has stopped to make any sounds..

Hello,
i have a problem with my device: it has stopped to make sounds (as the click on selections, the music from a mp3, the ring of a call) i can hear the voice of the speaker in a phone call. But i can listen to everything if i put the headset on. It seems like the device is switched in "headset mode" turning off the main speaker. When i plug and unplug the headset i can hear (sometimes) the sound to come back, just to shut off the second later.
I've tried soft and hard reset and i've even installed the news rom: once installed it seems to work properly.. but this morning is "mute" again..
anyone would help this poor guy?
thanks in advance!
Execus me for this question, but I have to exclude the obvious. Did you try raising the volume utilizing the speaker icon on the top bar?
The volume is at the max and all the sounds are enabled.
MaxDemian said:
The volume is at the max and all the sounds are enabled.
Click to expand...
Click to collapse
Are you using any siftware which might conflict with the OS?
Test the volume with no software installed and BOTH sliders at the maximum (UP)position,also bear in mind that the installed windows media player has a volume slider of its own.
Sadly not: the problem is still there even after an hardware reset, without any other software installed. And if i plug the headset i can hear everything, so the volume is up.
It seems like the device is finding the headset even if they are not plugged, thus turning the main speaker off.
...maybe a broken loudspeaker...
I'm afraid to say this , but before to have my trinity I experienced a similar problem with my old JAMin , were the loudspeaker suddenly stopped working and only with a new one ( loudspeaker) I recovered the correct " voice" of the device.
in this case it seems to be the same , but to be sure you should be able to mesure the impedance of it ; normally should be around 30 ohms ...
when mine was broken , it was completely "open" ....
but to do this you have to open the device !!!!
I'm sorry , any other idea...
MaxDemian said:
Sadly not: the problem is still there even after an hardware reset, without any other software installed. And if i plug the headset i can hear everything, so the volume is up.
It seems like the device is finding the headset even if they are not plugged, thus turning the main speaker off.
Click to expand...
Click to collapse
From what you say i think we can safely rule out the loudspeaker being damaged(you wouldn't have been able to hear anything ,not even for a second), it's more than likely that your problem has to do with the miniusb audiojack which might be shorting out,the only thing you can do before taking the device to a service center is insert a miniusb cable in the jack and carefully move it sideways and up and down,this might resolve the issue.
sammis said:
From what you say i think we can safely rule out the loudspeaker being damaged(you wouldn't have been able to hear anything ,not even for a second), it's more than likely that your problem has to do with the miniusb audiojack which might be shorting out,the only thing you can do before taking the device to a service center is insert a miniusb cable in the jack and carefully move it sideways and up and down,this might resolve the issue.
Click to expand...
Click to collapse
And... sucking the jack... although this might gives a too strong picture of how much you love your trinity
Thanks a lot,
moving the jack seems to solve the issue sometimes..
I was wondering: are there any settings on the registry to avoid the use of the headset: maybe if i can set the device to never use the headset the problem with the switch could be bypassed...
lost sound
well my trinity just did the same thing.
Was working fine one minute, then suddenly no sound. Plug in the headset and it works fine, but without the headset I can connect to a call but i can not hear the other person and strangely they cannot hear me. Seems like my phone is stuck in headset mode somehow.
Haven't done a hardrest yet, but i guess thats next . . .

Seriously broken sound!!

I have no idea what caused this (no drops recently) but would REALLY appreciate some help as my phone is really useless at the moment.
Presently, absolutely NO sound comes out of my phone at any point, via speakers or headphones, except during calls, where i can hear the other person but they cant hear me, i.e. microphone isnt functioning.
I have no idea what causes this, I have done a hard reset and inserted and removed headphones many times.
I should clarify that by absolutely no sound, I mean nothing on the phone works sound wise. You can in fact hear a really faint clicking/popping sound occasionally, but its grey noise, its not really quiet versions of what the sound is meant to be.
Many thanks if anyone can help!
I also made a brief voice recording on the phone and copied it to my PC to find it was blank, so microphone doesnt work outside of a call either.
.. summary: mic broken, speakers only work in a call.
Help?
Bump! Please?
try pairing with a bluetooth headset, you should be ok ... seems your sound driver is corrupt, did you by any chance increrase the preamp a lot in tcpmp and play sound for a while before experiencing this?
Cheers for the reply!
I hadn't done anything out of the ordinary like you mentioned, it just stopped working. I have done a hard reset, wouldnt that sort out a bad sound driver?
And, as far as I know I have no access to a bluetooth headset, why would that be any different anyway?
Is there any chance a rom reflash could help? I'm at last resorts here, I'm thinking about buying a palm!! (for budget reasons)
I will try it if it could work, trouble is the usb port is very dodgy, dis- and re-connects very often, so that could be dodgy for a reflash?
:'( !!
also mine is off!! just hearphone works, but built-in speakers are dead!
PLEASEEE help me!!
same problem occured to me...
if you were using a normal headset and after you plugged it out the sound started to break apart then do the following:
1-turn your media player on and start playing any audio file while volume is at MAX...
2-try to plug it in first and then test if the sound comes out of the headset normally...
3-then plug the heasdset out of the device (not all of it keep some of the jack inside the headset hole) do that in slow motion....yes...in slow motion and try to focus in making the sound goes out of the headset and the device at the sametime....
4-if you managed to make the sound BLOWS OUT from the speakers then the problem is because you plugged out the headset too quickly which generated a shock (actually i dont know if that's the accurate definition)
5- try to twist the headset jack left and right and plug it out gentely while the sound is still going out of the speakers...
and thats it...
hope your device will get well soon
same problem occured to me...
if you were using a normal headset and after you plugged it out the sound started to break apart then do the following:
1-turn your media player on and start playing any audio file while volume is at MAX...
2-try to plug it in first and then test if the sound comes out of the headset normally...
3-then plug the heasdset out of the device (not all of it keep some of the jack inside the headset hole) do that in slow motion....yes...in slow motion and try to focus in making the sound goes out of the headset and the device at the sametime....
4-if you managed to make the sound BLOWS OUT from the speakers then the problem is because you plugged out the headset too quickly which generated a shock (actually i dont know if that's the accurate definition)
5- try to twist the headset jack left and right and plug it out gentely while the sound is still going out of the speakers...
and thats it...
hope your device will get well soon
I did steps you mentioned and get my sound back!!
Thank you wizzmaster..!

headphone jack problems

Does the speaker in the phone have a mute ? No mater what jack I plug into the thing it never shuts off the speaker. I was hoping to play tunes on my car stereo but now I found out that even the samsung earbuds don't turn it off either, or is the phone junk and trade it in for a different one?
As strange as it may be but I was surfing this forum and made it to page 20 and then my phone locked up.I made it to taking off the batery cover and then my touch screen started to work normally again. It just kept zooming in and out. Then I was able to restart it and the head phones worked as they should. No explination on why and this morning I. Jammed the phone internet radio on my way into work with no problems .WTF? Hope it stays fixed.

Categories

Resources