Related
Can somebody tell me how to connect my MDA compact to my wlan router via bluetooth ? I've got a bluetooth access point (dlink DBT-900AP) that is connected by ethernet cable to my router/adsl modem.
I want to use email en internet access with my MDA Compact.
The standard built in bluetooth manager seems not to support this LAN access through bluetooth. Who can help me ?
i have the same prob ;-(
i have a qtek2020 and dlink dbt-900ap bluetooth acceess point attached to usrobotics router...
zeee
Ronnie12 said:
Can somebody tell me how to connect my MDA compact to my wlan router via bluetooth ? I've got a bluetooth access point (dlink DBT-900AP) that is connected by ethernet cable to my router/adsl modem.
I want to use email en internet access with my MDA Compact.
The standard built in bluetooth manager seems not to support this LAN access through bluetooth. Who can help me ?
Click to expand...
Click to collapse
The BT Lan Access Service using Microsoft BT Stack has been removed in the registry. It's been like that since XDA2.
I do not know if there is a corresponding driver available in MDA Compact such that you can re-enable the service via updated registry entries.
Anyone?
i think it needs the ppp bluetooth profile
and ms bluetooth stack dont have that
vidcomm bluetooth stack does....
you can try using that
henrylim said:
The BT Lan Access Service using Microsoft BT Stack has been removed in the registry. It's been like that since XDA2.
I do not know if there is a corresponding driver available in MDA Compact such that you can re-enable the service via updated registry entries.
Anyone?
Click to expand...
Click to collapse
Found the reg entry with missing configuration:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001102-0000-1000-8000-00805F9B34FB]
@="Lan Access"
and here are some more...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001105-0000-1000-8000-00805F9B34FB]
@="OBEX Push"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001106-0000-1000-8000-00805F9B34FB]
@="OBEX FTP"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001112-0000-1000-8000-00805F9B34FB]
@="Headset Audio Gateway"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Services\00001124-0000-1000-8000-00805F9B34FB]
@="HID"
Anyone knows enough of these entries?
just add those to your device, apply the other things from msdn you've found and restart your device. then scan your ppc on the pc for open services...
I have found a workaround
I'm the happy owner of an MDA Compact and a Siemens blue2net access point. Indeed, the Microsoft Bluetooth stack refused to talk to the access point, which only offers the "Lan Access" profile.
I tried the suggested registry hack. Good idea, but sadly it does not work. It would appear that the "Lan Access" profile is simply not supported by the Bluetooth stack - it has not just been disabled by deleting a few registry entries
However, I found a workaround. After a few hours of fighting with the Microsoft stack, I downloaded a free Bluetooth stack from Toshiba (http://aps.toshiba-tro.de/bluetooth/) that supports the "Lan Access" profile. I did a full backup of my MDA Compact, adopted the "brace position", and prepared for a crash landing (aka hard reset).
After installing the Toshiba Bluetooth stack, I simply had to do a soft reset to activate it. Big surprise for me: my MDA still worked. Clicking the Microsoft Bluetooth icon in the status bar now told me that my toy had no Bluetooth support; however, clicking the new Toshiba Bluetooth icon brought up a different (and better, IMHO) Bluetooth interface. From here I could see the blue2net access point. Not only that - I could actually connect to it. The rest was piece of cake: add the Bluetooth device and configure a modem connection via it. I am now happily surfing the web via Bluetooth
The only caveats I have so far are these:
1) I now have a disfunctional Microsoft Bluetooth icon in the status line. I would like to get rid of that. Please drop me a note if someone knows how to do that.
2) When using the Toshiba Bluetooth stack, the diode above the screen does not blink blue when Bluetooth is active. A small price to pay for having internet access
i am about to do as lars_juhl has stated on my xda II knowning that he messed with mda compact and i have a xda II but still i am going to do as he has stated will let you guys know wat happens.
FINGERS CROSSED !!
ok ive downloaded bluetooth stack v3.10.00 from the link that you've given and after extracting the contents of the zipped file on my desktop i have.
1.QFE (FOLDER)
2.SD_HOST_driver (Folder)
3.us (Folder)
4.AutoAns (Exe)
5.AutoOn (Exe)
6.AutoSetup (Config File I Guess)
7.lmgLoad.dll
8.Setup (Exe)
9.TbpSetup (Exe)
10.TbpSetup (Config)
11.TosBtLoad.dll
12.Uninstall
care to tell me which is the file that you installed on your pda as a bluetooth profile and i shall follow you.
regards
jeetz
I think you're supposed to download the 'Pocket PC 2002 / Windows Mobile 2003' bluetooth stack. This shows version 5.01.
Goodluck.
@lars_juhl ??
help needed here
Re: I have found a workaround
lars_juhl said:
However, I found a workaround. After a few hours of fighting with the Microsoft stack, I downloaded a free Bluetooth stack from Toshiba (http://aps.toshiba-tro.de/bluetooth/) that supports the "Lan Access" profile. I did a full backup of my MDA Compact, adopted the "brace position", and prepared for a crash landing (aka hard reset).
1) I now have a disfunctional Microsoft Bluetooth icon in the status line. I would like to get rid of that. Please drop me a note if someone knows how to do that.
Click to expand...
Click to collapse
Hi,
I've one question:
(a) Apart from Internet access, do you have other BT functions working?
e.g. Headset/Handsfree, BT ActiveSync??
The BT Tray Icon can be removed by deleting this registry key
[HKEY_LOCAL_MACHINE\Services\BTIcon]
then reboot.
If you don't wish to remove the key, you can disable it by editing this parameter value under the registry key
change
"Dll"="BTIcon_Dll.dll" to
"Dll"="BTIcon_Dll.dll.disabled"
then reboot. When WM2003SE tries to load the Dll driver, it can't find it and therefore the MS BT system tray icon will not be activated.
The download is here:
http://aps.toshiba-tro.de/bluetooth/pages/download.php
Works great on my MDA Compact too (DLINK BT-900ap).
Many thanks for this idea.
Does anyone know if there is a way to turn on/off the bluetooth radio once this stack has been installed ? I have the feeling that it is always on, consuming precious energy...
BTW has anyone tried headsets with this stack. Do they work ?
Thanks agian,
Martin
andrewpmoore said:
The download is here:
http://aps.toshiba-tro.de/bluetooth/pages/download.php
Click to expand...
Click to collapse
i did that mate downloaded the english version compatible with xp, but i wanna find out after downloading and extracting it which is the file that i am suppose to run so that the stack is installed on my pda ?
....my bt headset was recognized an paired (anycom headset) ... but is NOT working when calling...
thinksmart said:
Works great on my MDA Compact too (DLINK BT-900ap).
Many thanks for this idea.
Does anyone know if there is a way to turn on/off the bluetooth radio once this stack has been installed ? I have the feeling that it is always on, consuming precious energy...
BTW has anyone tried headsets with this stack. Do they work ?
Thanks agian,
Martin
Click to expand...
Click to collapse
Yeah, I have the same question.
And one more: After turning off/on toshiba bt icon disappers. How to fix it?
it works for me but how can i turn bluetooth off ?!! i think it goes ON all the time
Yeah, the BT icon is disappearing after turning the device off as well as sometimes ramdomly.
The set-up app (bt_setup) cannot be restarted without soft reset, I get following error "An error occured with th Buetooth Card Confirm that the card is working properly."
M.
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality missing in the MS stack!
...BUT...
It is unstable as hell (I have experience all the bugs listed in this thread) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
Hi All!
I have 2 devices - Qtek9100 and Dell X51v. I pair them and Dell see only 1 service - Dial-Up Networking! Where other services?!!!! Help me, plese!
PS: USB dongle see only 1 service too
Are you sure your Qtek is in discoverable mode? I saw that when you turn bluetooth on in the Comm Manager , it does not turn on the discoverable mode. For this you have to go to start-settings-connections-bluetooth and tick the box for that.
Maybe that is the problem on your device? You can use Buzz Lightyear's SwitchIt to switch bluetooth on and off and into discoverable mode as well, works pretty good.
Yes, I sure, my Qtek discoverable mode turn on. I dont try Buzz Lightyear's SwitchIt? but I try this. But other device see my Qtek, but dont see services!!!
Vic Odin said:
Yes, I sure, my Qtek discoverable mode turn on. I dont try Buzz Lightyear's SwitchIt? but I try this. But other device see my Qtek, but dont see services!!!
Click to expand...
Click to collapse
Everyone that can should check this- I have noticed the same thing on my KJAM. The only profiles available on the wizard appear to be DUN, headset and serial port. This is the same whether I use my PC with WIDCOMM BT, my Axim x50v or my Axim x30. I was wondering if anyone else was having the same issue, but had not taken the time to post more about it...
ill say it again!!!!!! Bluetooth smells on the wizard
Bring widcom back
I have the same problem. The only thing that I see is DUN...
One positive is that I can get DUN to work...
Same problem while trying to transfer some files from Nokia 6630 to Qtek 9100 :-/ Any solution to this?
I have found the solution to BT recieving problem: you must check the "recieve all incoming beams" in the settings/connections/Beam and you can recieve all files from other BT devices
any one know how the battery time will be if im using Dial-Up Networking ?
then did anyone sync successfully via bluetooth ???? can connect to the ActiveSync via bluetooth ??
Hi, i'm looking for a way to connect my Nokia 6230 to my Wizard so that the Wizard is recognized by the Nokia as headset. Does anyone know if this is possible?
I've been looking at the widcom/broadcom stack but i couldn't get it to work yet. Insufficient memory error.
Does anyone know if this is somehow possible?
I dont think this works. However I have done the reverse using my Laptop. I used my laptop to take calls and answer them, while my PDA is in the other room! w00t
And do you think it would be possible if we get the broadcom/widcom stack running on the Wizard?
No. I dont think that has the correct services/profiles. And is it possible to get the widcomm stack on the Wizard? Doesn't it already have the microsoft stack on it?
Thanks
how did u answer the calls on your lap top??? thats awesome wanna share? thank you!
my email address is [email protected]
To be a "headset" for another device, you need the "Audio Gateway" profile.
Most desktop adapters support this profile (the Widcom stack does), so your desktop or laptop PC can be a headset for your phone. I've used this as a speakerphone when we were doing something in a class. It's pretty slick.
The Wizard does NOT have the Audio Gateway profile, so it cannot be the speakers or mic for another device.
However, SOME of the Ipaq PDA's can do this. I've done it with a Bluetooth-Equipped Ipaq, so I know that, at least in theory, it IS possible.
TomXP411 thanks. You basically explained it for beckhams777...
PDAs that are not a phone themselves are usually the ones that have this profile. If you find a device that has this profile AND uses the Widcomm stack, I may be able to extract this profile and use it on other devices also. It also depends on what version of widcomm stack they use... But, it could well be possible now that I know some other devices can do it
Thanks
I'll go searching 8)
got it! thanks anyways!
T-mobile MDA (USA version) and Bt
Ok, read all the posts, so there isn't a way to use my bt earbud with music on my MDA?
it worls great for phone, but MDA does NOT have audio gateway software
Al
When I pair with my Mac (OS X 10.4), the mac does discover bluetooth audio as a service on the wizard... however when i try to send sound, OS X states that it could not connect to the BT Audio device... So in theory it should be possible, if the service is discovered. We perhaps just need an app on the wizard that responds to the connection request...
Hi,
I hope I am posting in the right forum, but I didn't find a forum for the Charmer (MDA Compact II) PDA phone. So, I am posting here, because I noticed that there are many threads here about Charmer, but If there is any place where my problem fits better, please inform me about it.
So, is there any way to set up a wireless TCP/IP network between PC and Charmer (obviously, over bluetooth, Charmer doesn't have Wifi)? After 2 days of massive googleing and reading various threads, I figured out that my Charmer shipped with microsoft bt stack, witch is not support PAN. On the Magician, there is a solution, it is possible to replace the bt stack with another one, or expand the functionality (I don't know too much about the technical details) to support PAN. On the Prophet, the problem easily can be solved with Wifi.
But what about the Charmer? I cannot find any working hack to replace the bt stack.
Activesync works over bt, but there is no TCP/IP. If connect through USB cable, TCP/IP network appears.
I'm really disappointed, and plan to sell my 1 week old Charmer because of this problem. Any comments, tips or tricks are welcome.
Thanks in advance
go into my network places, view network connections. you should be able to use the 'bluetooth network connection' to establish a network between the two but ive just tried it on mine and it doesnt work, guess the charmers stack doesnt support it. i know this is the right way to go about doing it as i can set up a network between my pc and laptop.
Yap dave, I did exactly the same, under network connections/bluetooth network connection I cannot add my ppc, becouse it says that it doesn't support PAN. That's why I need to replace the ms bt stack, wich is a garbage. As I figured out the last days, nobody have succesfully did this scenario yet.
Any solution?
I still don't have the solution for replace the BT stack on Charmer which supports PAN.
Any ideas?
When you connect to PC via ActiveSync (via Bluetooth) your ppc got address 192.168.55.101 and pc got address: 192.168.55.100
My dopod d810 is running WM6 at the moment
WHat happened is that im trying to get this product to synch with it
http://www.directron.com/laserkeyboard.html
but for some reason it cant seem to detect
i launched the bluetooth explorer and it just did not detect~
help me
Seems that Trinity identifies itself as a PDA in BT - some BT devices only want to bond to devices that identify itself as a computer.
You may want to try search for a registry key to change the BT device type in Trinity. It has been discussed before.