Hi All!
I have 2 devices - Qtek9100 and Dell X51v. I pair them and Dell see only 1 service - Dial-Up Networking! Where other services?!!!! Help me, plese!
PS: USB dongle see only 1 service too
Are you sure your Qtek is in discoverable mode? I saw that when you turn bluetooth on in the Comm Manager , it does not turn on the discoverable mode. For this you have to go to start-settings-connections-bluetooth and tick the box for that.
Maybe that is the problem on your device? You can use Buzz Lightyear's SwitchIt to switch bluetooth on and off and into discoverable mode as well, works pretty good.
Yes, I sure, my Qtek discoverable mode turn on. I dont try Buzz Lightyear's SwitchIt? but I try this. But other device see my Qtek, but dont see services!!!
Vic Odin said:
Yes, I sure, my Qtek discoverable mode turn on. I dont try Buzz Lightyear's SwitchIt? but I try this. But other device see my Qtek, but dont see services!!!
Click to expand...
Click to collapse
Everyone that can should check this- I have noticed the same thing on my KJAM. The only profiles available on the wizard appear to be DUN, headset and serial port. This is the same whether I use my PC with WIDCOMM BT, my Axim x50v or my Axim x30. I was wondering if anyone else was having the same issue, but had not taken the time to post more about it...
ill say it again!!!!!! Bluetooth smells on the wizard
Bring widcom back
I have the same problem. The only thing that I see is DUN...
One positive is that I can get DUN to work...
Same problem while trying to transfer some files from Nokia 6630 to Qtek 9100 :-/ Any solution to this?
I have found the solution to BT recieving problem: you must check the "recieve all incoming beams" in the settings/connections/Beam and you can recieve all files from other BT devices
any one know how the battery time will be if im using Dial-Up Networking ?
then did anyone sync successfully via bluetooth ???? can connect to the ActiveSync via bluetooth ??
Related
I have read all about the bluetooth i need to know to configure the XDAII to work with the comp. Problems i encounter are
1. THey get paired with the auth keys i put in! but the services that i wanna retrieve from the comp on the XDAII itself cannot be view, all i get from Bluetooth>Bonded Devices>Desktop are 1. rename 2. delete. Is it suppose to be that way?
2.Now the vice versa, when i wanna retrieve the services from the XDAII on my comp it gives me only 1 choice, and that is DUN or Dial-Up Networking? and i on the right track?
3. Downloaded the stupid Bluetooth software for the comp and the software cannot seem to detect my XDAII
4.Downloaded the Pocket Bluetooth tools, thinking that it will solve all problems, i am still stuck there!!
I only in my early twenties but i seem bald enough from the stress i get at work, now with this stupid dongle that i bought from Auction it seems to me that i am already bald! Pls some1 just guide me along this... Another other tools or softwares to get???
1 last thing just to let all out there know... I am running on a XP platform with the latest T-mobile 1.72 rom in my XDAII.
From what i understand the XDAII has only a stripped down bluetooth stack. I would like to use a Crabat bluetooth dongle to receive MP3 over bluetooth but this to will have to wait until someone v.clever does a very serious driver package.
From what i think now is the BT stack in XDA 2 is not compitable with the widcom BT stack in my comp! thats the prob any soultions to it? somehow i manage to get it sync but error to the com port saying other programs are using the comp port. Well i getting balder by the seconds! its already 0500 in Singapore!!!
I give up. First when i use the bluetoothGPS i can get an outgoing port to recongize on XP then when i uninstall that, the outgoing port also just dissappear. Can some1 explain to me what is happening? When i download the pocket BT tools. I only get an incoming port from the XDA2 is it suppose to be that way?? Shouldn't i be having a outgoinport to sync too??
FINALLY
I got it to work finally with another bluetooth dogle i bought. An advice to all ppl trying to do bluetooth out there. Always get the class 1 (100m) bluetooth dogle, always a better range!! XDA2 can go out to 30 m. With the new bluetooth stack + bluetooth tools it is good!!! Finally i got it to work with help from http://forum.xda-developers.com/viewtopic.php?t=5237&highlight=active+sync+bluetooth
Hey , i have a Qtek 2020i with a sony headset and a gps bt-308 both of them BT.
i do not have a problem with the headset it works fine
bu with the gps i have a big problem .
the PPC wont connect to the gps, it does not find it , i can't see it in the BT manager.
i tried everything from Rom updating to BT tools updating
my rom is the latest that i found for qtek 2020i 1.11
also the latest BT tools
i install the GPS cd it hasn't given me anything
i really do not know what to do to fix it.
Please help me fix this problem
Fox2 said:
Hey , i have a Qtek 2020i with a sony headset and a gps bt-308 both of them BT.
i do not have a problem with the headset it works fine
bu with the gps i have a big problem .
the PPC wont connect to the gps, it does not find it , i can't see it in the BT manager.
i tried everything from Rom updating to BT tools updating
my rom is the latest that i found for qtek 2020i 1.11
also the latest BT tools
i install the GPS cd it hasn't given me anything
i really do not know what to do to fix it.
Please help me fix this problem
Click to expand...
Click to collapse
Use com port 6 and try it again
what do you mean use com 6
my inbound is already on com 6??
please explain
Bluetooth manager select "Explore a bluetooth device" it should show up there, then select it, it should display "Slave" device or something similar.
If you need to pair it use the key "0000" (usually works)
If your having problems with TomTom 5 you will need to use the newer 5.10 patch, this fixes the problems where it wouldnt reconise "Other bluetooth devices".
I use COM port 5 with my bluetooth GPS but i guess its not specific.
Also you might want to turn off your bluetooth headset while you get the GPS working as it may want to comunicate on the same port, which if it is the case ... im not sure how you can get both working together.
Hey guys,
I got it to work once. But I have no idea how to make my iMate Jam connect to my PC's bluetooth connection using the Wireless Modem application on my Jam. Eveytime I fiddle around with that software it ends up screwing with my radio signal and I lose the signal. Then I have to reboot the phone to make it work again. Does anyone have any instruction on how to work this program? This seems to be so much harder than my P900 which I just used the Dial-up Bluetooth Modem and had it dial *99#. By the way I'm using the standard Windows XP Bluetooth stack with my USB Bluetooth adapter. Please help.
i've the same problem... anyone as a solution?
bt modem tip
On my sx66, i noticed i was having a problem with my modem connection, I noticed it wouldnt let me connect if I had already initiated a gprs session, ie. syncronizing with my excahnge server or pop mail accounts or web browsing on the pda. If i soft booted then connected the dial up connection it worked fine. In some cases i have heard some peoples PC would drop the DUN setting after every sesssion with the PC's BT settings.
rovert said:
Hey guys,
I got it to work once. But I have no idea how to make my iMate Jam connect to my PC's bluetooth connection using the Wireless Modem application on my Jam. Eveytime I fiddle around with that software it ends up screwing with my radio signal and I lose the signal. Then I have to reboot the phone to make it work again. Does anyone have any instruction on how to work this program? This seems to be so much harder than my P900 which I just used the Dial-up Bluetooth Modem and had it dial *99#. By the way I'm using the standard Windows XP Bluetooth stack with my USB Bluetooth adapter. Please help.
Click to expand...
Click to collapse
This is why it's worth following my blog - I've published a tutorial of this over a month ago. Please read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=510&more=1
Forget the wireless modem application, it's not necessary for this for me.
Go to your PC's bluetooth and open it up. Is et Widcomm? Pair the phone with the PC.
ok, on the PC click on the paired phone and click search for available services. SSA should come up.
Set up a dial up connection with phone no *99# any username, password for your provider and it should connect. PLEASE' Note, you must be DISCONNECTED from GPRS on the phone first to make a connection from your PC.
You may also have to put in an APN on the bluetooth modem in Windows XP, Control Panel, phones and Modem options, as supplied by your provider. First let us know if you get as for as finding SSA?
Surgy, ignore last post, I just saw yin said you are using MS Bluetooth stack.
admisi said:
Surgy, ignore last post, I just saw yin said you are using MS Bluetooth stack.
Click to expand...
Click to collapse
You can also use the DUN from the MS BT stack too.
Your tutorial only covers the newer devices with WM5. I'm using an older i-Mate Jam/Magician and when I do a discovery with my Bluetooth adapter on my PC I only see OBEX File Transfer, Serial Port, and Voice Gateway. I still can't figure out a way to do it wirelessly. I have figured out how to do it via USB cable and the Wireless Modem program on the Pocket PC but it's only a 28.8 connection whereas usually I connect at 56K with my Sony Ericsson P900. Strange stuff. Well I'll be upgrading to a Jamin shortly so I hope this will resolve my problem.
rovert said:
Your tutorial only covers the newer devices with WM5. I'm using an older i-Mate Jam/Magician and when I do a discovery with my Bluetooth adapter on my PC I only see OBEX File Transfer, Serial Port, and Voice Gateway. I still can't figure out a way to do it wirelessly. I have figured out how to do it via USB cable and the Wireless Modem program on the Pocket PC but it's only a 28.8 connection whereas usually I connect at 56K with my Sony Ericsson P900. Strange stuff. Well I'll be upgrading to a Jamin shortly so I hope this will resolve my problem.
Click to expand...
Click to collapse
OIC. Strange. Some (for example, Verizon) PPC PE devices are crippled in that they can't be used as BT modems.
If you can't see the DUN or SSA or Dial Up. it sounds like your Bluetooth has been modified on the imate jam/mini.
Did you install either the Blue Soleil Stack or the new BLUETOOTH STOCK from this forum?.. If so, then this is the problem. Standard default Bluetooth Stack should show it in discovery.
What make is your bluetooth dongle?
admisi said:
If you can't see the DUN or SSA or Dial Up. it sounds like your Bluetooth has been modified on the imate jam/mini.
Did you install either the Blue Soleil Stack or the new BLUETOOTH STOCK from this forum?.. If so, then this is the problem. Standard default Bluetooth Stack should show it in discovery.
What make is your bluetooth dongle?
Click to expand...
Click to collapse
I did upgrade it to the new bluetooth stack. I guess it did more harm than good. Is there anyway to undo it or must I hard reset and install everything all over again? I have a Logitech Dinovo Bluetooth Keyboard/Mouse combo.
Hi all,
I've enabled the registry change that will allow the MDA to RECEIVE files from another BT device, such as my laptop. But when I tried to do so, I receive an error on the laptop saying "FTP service not found on target device".
Does this means that one can NOT send a files to the MDA?
I run the Qtek AKU2 ROM and I have the same problem with my XP machine (I haven't done any registry changes though). The weird thing is though, that I can send files to the Wizard from my Mac or my other Linux phone. But it's just XP with an Anycom (Broadcom firmware) usb BT dongle that doesn't send files to the Wizard.
It's good to know that I am not the only one having this problem!
My MDA (HTC Wizard) is running 2.17 ROM and my XP machine is running the Widcom BT driver 1.4.2.2.
Anyone else can help?
I also have this problem. I have Qtek S200 with Aku2, a portuguese rom, and the latest Widcomm 5.1.2500. If this is by default, another disappoitment from M$****
Erm, guys, please check this....
To be able to recieve BT incoming transfer you need to have a tick on
Start>Settings>Connections>Beam
jamichy said:
tick on
Start>Settings>Connections>Beam
Click to expand...
Click to collapse
Thanks for that. I was previously under the impression that the option you mentioned was for Infra-Red only as I could accept BT files all day long on my old X50v with it turned off
jamichy said:
Erm, guys, please check this....
To be able to recieve BT incoming transfer you need to have a tick on
Start>Settings>Connections>Beam
Click to expand...
Click to collapse
I don't see any Beam on the connections window... Am I missing anything??
i cant see the connection of turning on the infra to receive file via bluetooth..
wierd..
wierd!..
i cannot sync via bluetooth......my laptop detects and its paired too...no incoming or outgoing ports are seen....i hve 2 BA both upgraded to WM6... working allright ....please somebody help
Well, you didn't exactly give much information.
What do you mean "no incoming or outgoing ports are seen"? What do you get when you go into activesync on the angel and tell it to connect via bluetooth?
you must have enabled on your PC BT dongle one incoming and one outgoing com port, also in activesync on your pc in connection settings you must check that activesync to accept connection on your incoming port. Then the sync over BT will be possible
bluetooth
thank you explode I have done it now
What settings do I need to fill up?
Hi anyone who can help me,
I am trying to sync via bluetooth... I can connect both laptop and BA .. however, I dont know what else I need to do to make them sync via bluetooth..
I dont understand where to set up the com in and out.
would someone be kind enuf to guide me step by step please .. excluding pairing devices since that is straight forward.
Cheers
Maybe the same here
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Workaroung to service not available
ungureanub said:
I have installed WM6 on my N560 and now I cannot send files from my computer to my pda. The pc sais that the pda does not accepts this service.
Any ideea?
Click to expand...
Click to collapse
I have the same problem, just enable the beam in the connections manager, then enable the bluetooth as well , then set bluetooth to discoverable in the bluetooth settings then everything works fine.
It seems the beam must be enabled as well for some reason.
Would love to know if there is a more elegant solution though.
I can create only incoming port on PC. When I try to create the outcoming port, he try to find the device (BA) but don´t find it. Help....
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
iixxboredumxxii said:
well like my phone after updating it to wm6 6.1 i cant recieve anything shared on bluetooth, my phone is discoverable but nothing can send into it because it says it fails! can anyone help??
Click to expand...
Click to collapse
Me neather... someone can help?
Radio Upgrade
Hi everyone, sorry if I post this in the bad place but I search for the radio upgrade at the wiki and I wanned to upgrade to version 1.13 BUT the link seams to be broken or something. Anyway, I was wondering if any of you can upload this from rapidshare or give me another link because I want to test the improvement. Thanks!