I finish flashing my mini S and get stuck at the boot screen, what can I do?
I boot my Wizard in safe mode and re-flash it many time, it still stuck at boot screen! :[
Can anyone help me?
Thanks!
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 6.0.0.0
Put your phone in bootloader mode and flash the latest rom that your carrier made or flash wizard love.
Good Luck
ThankS!
peter petrelli said:
Put your phone in bootloader mode and flash the latest rom that your carrier made or flash wizard love.
Good Luck
Click to expand...
Click to collapse
I am a new comer, How can I make it in "bootloader mode"?
Thanks again!
vaiopostpet said:
I am a new comer, How can I make it in "bootloader mode"?
Thanks again!
Click to expand...
Click to collapse
Turn off your device and then hold the camera and power buttons untill it powers back on. It will power on in tri-color mode AKA bootloader.
Thanks!
I try it and flash it again and again! But it still hang at O2 screen with IPL, SPL, GSM and OS.
So, what wrong of it?
:{
Thanks again!
vaiopostpet said:
I try it and flash it again and again! But it still hang at O2 screen with IPL, SPL, GSM and OS.
So, what wrong of it?
:{
Thanks again!
Click to expand...
Click to collapse
Ok give this a try. Disconnect your device from the cable/cradle and then remove the battery for about 3 secconds and then put it back in. Hold the camera and power button to put the phone in bootloader mode and then use RUU to flash back to carriers latest rom.
P.S. What is your IPL/SPL and who is your service provider?
Thanks!
IPL 2.25 0001
SPL 2.25.0001
Cingular
Thanks again!
re: O2 ada mini S
IPL 2.25 0001
SPL 2.25.0001
Cingular
Thanks again!
vaiopostpet said:
IPL 2.25 0001
SPL 2.25.0001
Cingular
Thanks again!
Click to expand...
Click to collapse
Ok so you hava G4. Since it is a G4 then you have 2 options, either pay to have the device CID unlocked or try this thread [solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED]
dharvey4651 said:
Ok so you hava G4. Since it is a G4 then you have 2 options, either pay to have the device CID unlocked or try this thread [solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED]
Click to expand...
Click to collapse
I still stuck at the loader mode, so, what should I do to recovery it?
Thanks!
After on day.........
I still stuck at the loader mode, so, what should I do to recovery it?
Can anyone help me???????????????????????
vaiopostpet said:
I finish flashing my mini S and get stuck at the boot screen, what can I do?
I boot my Wizard in safe mode and re-flash it many time, it still stuck at boot screen! :[
Can anyone help me?
Thanks!
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 6.0.0.0
Click to expand...
Click to collapse
If the screen you're stuck at is tri-colored, push the green hardware phone button. Lower left on the 8125. This is basically a hard re-set directly from the device hardware.
Dead! :{
hotdog53 said:
If the screen you're stuck at is tri-colored, push the green hardware phone button. Lower left on the 8125. This is basically a hard re-set directly from the device hardware.
Click to expand...
Click to collapse
Thanks!
But, it cannot power on right now!
I think, it is time to repair!
Anyway, thanks for guys who reply me!
Related
Hello everybody.
After i flashed the Radio ROM 2.69.11 to my Wizard..
Its broken, freezes on bootup and wont run.
the screen shows the following:
IPL: 0.3
SPL 1.03
OS 1.3.1.13
--------------------
How do i fix this problem?
Thanks
//Daniel ..
IPL 0.3? What did you loaded into it...
The Radio ROM may be too new for your IPL version...
If warranty is not important, Go to the Wizard Upgrade section and read the stickies, use Button's 1.05 ROM to unlock, then upgrade a newer IPL and SPL.
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
latii said:
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
Click to expand...
Click to collapse
Put it into bootloader, then flash from there.
Bootloader is.. Power + camera button.. right?
I got red/green/blue/ screen now.. with IPL 1.03 and SPL 1.03..
Connection USB and start the .exe file? (from buttons).
//Daniel
Wizard Works Again!!
Big Thankss To Alll !
Really Appriciate..
//daniel
Right, I have a massive problem.....Been debranding HTC and all for ages now using this great site. But now it happened. I was trying to install WM06 on a charmer and well my comp froze partially in the process....Now I can get to the tri-color screen but cant flash there oddly enough. And when I normally start it, I get the splash with the info
IPL 2.06.0001
SPL 2.06.0001
GSM 02.69.21
OS 6.1.0.0
The major issue I have is when I use USB TTY, it says not the proper security level. I know many wrote bout this issue already but jst seconds before I unlocked the phone using Lokiwiz so I thought I am CID unlocked??
Any help??
I flashed my Polaris sometime ago to cooked rom, of course using HARD SPL. It has been working fine until I flashed it again to BEPE and again to something else. It started going into bootloader (tri-color) each time I restart. I flashed it with HARD SPL V2 and it starts again and each time my NAV. Hangs and I restart it goes back to bootloader (tri-color).
Right now I’ve tried everything and it wont get out of BOOTLOADER (TRI-COLOR).
HELP! HELP!! HELP!!!!
faxme said:
I flashed my Polaris sometime ago to cooked rom, of course using HARD SPL. It has been working fine until I flashed it again to BEPE and again to something else. It started going into bootloader (tri-color) each time I restart. I flashed it with HARD SPL V2 and it starts again and each time my NAV. Hangs and I restart it goes back to bootloader (tri-color).
Right now I’ve tried everything and it wont get out of BOOTLOADER (TRI-COLOR).
HELP! HELP!! HELP!!!!
Click to expand...
Click to collapse
What does it say in the bootloader?
Dave
DaveShaw said:
What does it say in the bootloader?
Dave
Click to expand...
Click to collapse
Bootloader mentions normal info as when u want to flash: Thus TRI-COLOR MODE. I REMOVED THE BATTERY THE WHOLE DAY. i CAME HOME NOW AND IT WORKS AGAIN, then I turned it off and it went back to TRICOLOR MODE:
POLA100 MFG
SPL-2.20.OliNex
CPLD-2
SERIAL (and if I insert usb then it turns to USB)
did u try upgrading an official ROM (it worked for me ...)
I had the same problem, nice colors but not so useful.
Try to reflash by using the microsd card metod, that helped me.
http://forum.xda-developers.com/showthread.php?t=384084
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
?
tried flashing with HTC_1.12.405.01_026790_WWE_SHIP says invalid model...
T-Mobile dead loop ?
I have similar problem with my artemis. I have a HTC P3300 from T-Mobile. It started with switching itself out, then it didn't want to boot, then it began to hang on bootscreen and at the moment i cannot start it at all (even the battery is fully charged and it is pluggen in my PC).
I suspect that T-mobile build in a dead loop somewhere in the software or hardware. It looks very suspicious to me that both mdas i had from T-Mobile start to make problems exactly a month or or two after the warranty is expired. and the problems develop in the same way in deteriorating manner.
It could be that the hardware cannot take it anymore and it starts to deteriorate exactly after the second year (handy for two years contracts).
Does anyone similar experiences or anyone solved that problem.
Sorry mates I cannot provide you with any info about my PPC (radio, rom version etc.) because I simply cannot get so far to be able to see that information.
Looking forward hearing from you
Cheerz
Hi, my problem is similar, but I need the ROM in ITAlian.
Information about my cellphone:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
Any ideea how to download this ROM? Pls help.
Thanks, Fernando.
Here the same...any one help?
kappp13 said:
hi.
i got this p3300 and it doesnt fully turn on.After i press power in remains stuck on the boot screen : the one with the HTC logo and info about the rom:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.12.0.0
I tried to flash rom but it fails at 2 or 3% saying image file corruputed which i think its right because i dont think it was unlocked so you can write any rom you want.
I also tried USPL but that i get "NO devive connected" so i cant unlocked my device to write a proper rom into it.
I did all the above with the device in boot mode (record button+reset).
Any ideea?Pls help.
Thank you!
Click to expand...
Click to collapse
Have you tried the CMON USPL? It's on Shady's ROM (the lite one) run this first! Be in Bootloader. Hold the Record Key (left key) and by holding that press Power key to switch on! Then try to Update your ROM
Hello
Got here friends htc wizard (MDA VARIO). After dunno what only boot screen appears and thats all. Bootmanager is accessable.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
I am able to put there button rom, but thats all. I tried many roms, but noone can be instaled. Also tried love wizard rom. I dont have the original rom.
Batery is loaded up to max.
Any suggestions?
Ok solved, it was problem with flash tool.
EDIT: still i dont have any functional ROM. The love wizard rom doesnt boot up. I dont have access to original rom. I am nearlly at end of ideas.
I was able to load there this ROM:
RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.exe
But still it freezes on boot screen.
Please, anybody got a rom, that works in a Mda Vario from slovakia? Its for sure cid blocked and i dont have a functional rom.
Hard reset is not possible. He says, that failure at format. Any body got some idea????
maybe you can try to update your IPL to 3.08 and GSM to 2.x
sailor_sky said:
maybe you can try to update your IPL to 3.08 and GSM to 2.x
Click to expand...
Click to collapse
Tryed and still not working. But thanks for your post