On my laptop I am connected to a LAN (for work and internet). At the same time I use the dial up (t mobile web and walk plus through the phone, connected on Bluetooth). . I want to be able to use only certain services/destinations over dial up and everything else to be routed over the LAN. For example, set up one browser, a messenger, outlook to go over the dial up while all my other traffic goes though the LAN. How can I achieve this?
I thought of using some proxy server software to set up one browser to go over the dial up but how do I prevent everything else going over dial up then?
Cheers,
Dan
in pc network properties under tcp/ip for a connection you can set
metric's
the connection with the lowest metric will be the first the pc will access for a connection
so if you 1 have a normal network without internet on wired LAn and a wifi which give internet
then you can avoid the LAN which normaly gets first priority try to control the internet
you do that in this case by setting a lower metric for the wifi then the LAN
thanks Rudegar, I will try it.
Related
Hi all
Firstly apologies if this has been discussed elsewhere. Searching bluetooth returns ... too many results to sift through.
OK, I have this setup. I connect my laptop to the net using either the router OR network cable. My laptop is equipped with BT.
Is there any way to browse the net from my PDA, by establishing a BT connection from XDA2 to the Laptop?
I know it would be a doddle (I hope) if I were to purchase a wifi SD card, but if I can avoid the expense it would be great.
Thanks in advance.
One way would be through BlueTooth ActiveSync. As when in the cradle, when your PPC is connected to your PC through ActiveSync, internet connectivity is through the PC. I use it whenever I am in proximity to my BT laptop. Works well!
If you go to Options in ActiveSync, click the Rules tab, check Open ActiveSync when my mobile device connects. and have the Connection set to The Internet or Work depending how your network is set up. Then establish an ActiveSync connection (USB, serial, Bluetooth or IrDA) and it will allow you use Internet programs like PocketIE, Pocket Outlook, etc.[/b]
I thank you both for your very very quick response.
Yes, both methods work. YIPEEEEEEEEEEEEEEEEEE
I am one happy bunny.
Cheers
Going insane bluetooth activesync internet
I wish I could be so happy. Let me give a brief overview of the last 6 hours:
Installed bluetooth dongle on the work PC - eventually got it connecting to the XDA2.
I have now managed to get a connection with activesync which seems to be quite robust and synchronises ok.
I am now trying to get on the internet via my active sync bluetooth connection (and tearing my hair out)
My network management is now set to a new connection I have created call 'My Work' no modem set up with the proxy settings set to those required on my work LAN. No VPN set up.
Have set the pass through on the PC to work, internet and open activesync to enable and disable but can't get ti to connect. Please help!!!!!
Going insane bluetooth activesync internet
I wish I could be so happy. Let me give a brief overview of the last 6 hours:
Installed bluetooth dongle on the work PC - eventually got it connecting to the XDA2.
I have now managed to get a connection with activesync which seems to be quite robust and synchronises ok.
I am now trying to get on the internet via my active sync bluetooth connection (and tearing my hair out)
My network management is now set to a new connection I have created call 'My Work' no modem set up with the proxy settings set to those required on my work LAN. No VPN set up.
Have set the pass through on the PC to work, internet and open activesync to enable and disable but can't get ti to connect. Please help!!!!!
maybe it's a firewall issue
try messing around with the ping program
on your pocketpc and see if you can ping the ip of your computer
and on it's gateway and dns
also make sure your dns settings on your pocketpc is set to the same as your pc
pocket ping
http://www.pocketgear.com/software_detail.asp?id=11879
Thanks for the advice. Bit stumped really:
My PC has a static IP address (10.130.16.84) I run pocket ping on the XDA and it says it's IP address is 192.168.55.101 the network is DHCP enabled. Neither of them can ping the other one (so there is no way I can connect to the proxy from my XDA2). Any ideas why my IP address isn't in our LAN range.
Just out of interest I can use a Dell X3i and connect to the network wirelessly no problem at all.
Further to baffle everyone - If i disconnect bluetooth and cradle it. I get the same Ip address but can connect to the internet no problem! So this would lead me to believe that all the connection and activesync settings are correct.
not sure here are some guides
http://www.geekzone.co.nz/content.asp?ContentId=449
Thanks for the help but the guides didn't fix the problem.
I eventually got it working (and a better bluetooth connection in the process) by downloading the slightly newer version of the XTND Blue Manager software http://www.windigosys.com/support.htm
I can now suft the internet on the XDA over activesync and syncrhonise files ok. Slightly slow but this I expect with what is basically a glorified serial port!
The only slight niggle I have now is that ActiveSync always reverts back to COM1 as the default port when I reboot my machine. Is there any way to stick it to com3?
it's blazing away at 700K/sec at least so the specs says
Hi, Ive just got an imate JAMin after a 3 year break from the Pocket PC world and im very impressed but I have a few questions.
1) VPN, how do you actually connect to it? I have enterd all the details to connect to my windows VPN server but as far as I can see the only way to initiate the connection is to tap hold on the VPN in connection manager and select connect. But it also never does anything.
2) Is there any way to select if the wireless uses b or g mode or is it totally automatic? I would like to leave it in b only mode to save power.
3) My setup is as follows. Wireless at home directly connected to the internet, wireless at work on our lan which also offers internet access. I would like to know whats the best way to setup my connections? Should I say my wireless is on the work network or on the internet? I want connections no matter where I am to always use the wifi first and then if it cant connect to use the GPRS connection. The way I have done it is to convigure everything to use my work network and added a GPRS connection to that. so the 'My ISP' option isnt even used any more.
Many Thanks for any assistance you can offer.
I configured my private wireless network, and the needed configuration for my cellular carrier web connection.
The issue is that whenever I am trying to surf to any webpage using my wireless LAN, my trinity always trying to connect to the cellular network, without using the available wireless connection. If I'm trying to cancel the conection process, it stopped but I can't surf anywhere.
Any ideas how to force the trinity to use the wireless network when available?
Thanks,
Amir.
In your connections configuration, create a new connection and do not add any entries to the Modem Section. Just configure the Proxy setting according to your ISP requirements. You have to change the connections configuration ach time you want a different connection to the internet. This you can do easily by creating different connctions for different situations.
Regards,
Randy
It sounds as if your connection to the WLAN Router isn't being recognised.
1st thing to try is to go into the WLAn control panel, and in the Power tab, make sure the slider is fully to the left for max performance.
In the Network Cards CP, see if your router is listed, and whether Available or Unavailable.
Recheck the security settings- are you using WEP or WPA? Does your router have any Range Extender features- if so, turn them off.
Once you have a valid WLAN connection, the PPC will use that in preference to the GPRS, as long as you have WLAN conneced before opening PIE, and as long as there is no current GPRS activity when you open PIE (I find that if my Exchange Server is connecting via GPRS, then WLAN won't connect till the data session has completed)
For a quick way to force GPRS off, then on as needed, look for a great free app called Bandswitch. This allows you to force the P3600 to use GSM or 3G if needed to conserve power, and also to quickly enable/disable the various GPRS connections.
Hi Everyone,
Having the Shift as my workhorse since some moths, there is still one annoyance I couldn't avoid: my VPN connections are interrupting the Internet connection when using 3G/HSDPA modem connecting to Internet in Vista/WM.
I was trying to search through all existing threads, but I still don't see anyone finding a solution.
I think the root lays in WM somewhere, since I cannot establish a PPTP connection in WM neither. In my case it is certainly not caused by the data provider, because I have checked it with them.
Let's try to put our knowledge together to sort this out !
This is normal behaviour I suppose
When connected to the VPN, the VPN must provide you with either a proxy or another internet gateway, otherwise you are just connected to a private network...
Maybe you mean something else, but from what I read it seems like you never got on the internet with VPN active.
If you did, and you are talking about intermittent network errors, then only high performance settings on your power settings may help.
If you could give more info I could help more. IP/Proxy/Gateway/ did it ever work yes no etc.
lucid said:
When connected to the VPN, the VPN must provide you with either a proxy or another internet gateway, otherwise you are just connected to a private network...
Maybe you mean something else, but from what I read it seems like you never got on the internet with VPN active.
If you did, and you are talking about intermittent network errors, then only high performance settings on your power settings may help.
If you could give more info I could help more. IP/Proxy/Gateway/ did it ever work yes no etc.
Click to expand...
Click to collapse
Lucid,
Thanks for replying. I will try to explain it another way.
1. When I am connected to Internet via Wifi, I have no problem using my VPN connection. I get authenticated and connected to the company network and the connection stays active as long as I want.
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
I hope this is more clear this way, any hints are very welcome !
jarbi said:
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
Click to expand...
Click to collapse
Thats exactly the same problem that i have had for over months - it just doesn't work and I can't see any way to get it to work - so much so, I don't use the Shift anymore - got a Tytn II and redfly and just remote desktop to a PC on the work lan!
jarbi said:
Lucid,
Thanks for replying. I will try to explain it another way.
1. When I am connected to Internet via Wifi, I have no problem using my VPN connection. I get authenticated and connected to the company network and the connection stays active as long as I want.
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
I hope this is more clear this way, any hints are very welcome !
Click to expand...
Click to collapse
The VPN that you are running is on VISTA side.(if yes try to see the routing table) by default the VPN get the default GW, and try to change it.
If this is the issue then you can go to the VPN connection properties -> Networking ->TCP/IP -> Properties -> Advanced -> IP Setings -> unchek the use the default GW on remote network.
regards
Is this a problem caused by this vista "feature", which disconnects the 3G Modem from Vista, as soon as an other network is being connected via WLan or via cable?
I think this is a stupid feature. Instead of that the users just should set the metrics for the networks manually and you can be sure, that Vista always uses the WLAN instead of the GSM/3G modem, if both where available.
alazarid said:
The VPN that you are running is on VISTA side.(if yes try to see the routing table) by default the VPN get the default GW, and try to change it.
If this is the issue then you can go to the VPN connection properties -> Networking ->TCP/IP -> Properties -> Advanced -> IP Setings -> unchek the use the default GW on remote network.
regards
Click to expand...
Click to collapse
alazarid,
Thanks a ton, the TCP/IP part did the trick ! Now my VPN has a use ).
cheers !
Ok guys heres the issue...
At first I thought this problem was associated with the fact that there may have been some software monitoring for other data connections, to disable the GSM modem when not needed...
After checking into everything, I found that there is probably NO software that does this...
Since WM handles the passthrough for the 3G connection, and ontop of that the actual endpoint for the data connection on the GSM connection is the WM side and not Vista, what happens is what when the VPN creates a connection and you opt-in to use the default remote gateway (I prefer to use it, because I require this for the work I do), the default gateway is updated on the 3G network interface.
I beleive that this update of configuration, then causes the WM side to stop the connection because either a) it doesn't know howto interprit this or b) retries to create the connection because it thinks there is an error.
I havn't played with this for a few weeks, and have my fair shareof other stuff I deal with, so I cannot remember if WM NATs the 3G connection, but the key thing breaking this is the WM side.
I beleive that IF you did want to hack up a configuration that uses the remote gateway, you could configure a VPN connection under Windows Mobile and have WM connect to the VPN, therefor the PC would be using that connection (but wouldn't be aware that its connected to the VPN), therefore giving the user access to the VPN, WITH the remote default gateway being used.
Again, as I mentioned its been a while since ive gone tech on my Shift, but I beleive this is correct. If anyone wants to add anything, please feel free.
I have a HTC Touch 3G (Jade) running Windows Mobile 6.1, i have managed to set up the VPN connection with my work server, the phone connects to the server (although it does say the connection is not encrypted), but when i set Activesync going of the phone the server drops the VPN connection
I have read about adding the server address into the exceptions list, but this does not help.
Any assistance would be much appreciated
Thank you
think it could be because if
settings->connections->connections->advanced-selecet network is set
to my home network
that would make the device try and use the network connection it get access to from active-sync and drop the connection it is using to connect to vpn
I would turn of the ability to use the active-sync as network connection
Rudegar said:
think it could be because if
settings->connections->connections->advanced-selecet network is set
to my home network
that would make the device try and use the network connection it get access to from active-sync and drop the connection it is using to connect to vpn
I would turn of the ability to use the active-sync as network connection
Click to expand...
Click to collapse
Thanks for the advice Rudegar
settings->connections->connections->advanced is set to;
Programs that automatically connect to internet = Mobile web
Programs that automatically connect to private network = My Work Network
I would try and change the later of the options
and maybe look in pc activesync for the ability to turn of network sharing
Help!!!!, still no joy
Does anyone know if it is because i am trying to connect to the VPN via a 'payasyougo' sim, having reads O2's info they only appear to talk about connections to VPN via 'pay monthly'?
Thanks