Hi, Ive just got an imate JAMin after a 3 year break from the Pocket PC world and im very impressed but I have a few questions.
1) VPN, how do you actually connect to it? I have enterd all the details to connect to my windows VPN server but as far as I can see the only way to initiate the connection is to tap hold on the VPN in connection manager and select connect. But it also never does anything.
2) Is there any way to select if the wireless uses b or g mode or is it totally automatic? I would like to leave it in b only mode to save power.
3) My setup is as follows. Wireless at home directly connected to the internet, wireless at work on our lan which also offers internet access. I would like to know whats the best way to setup my connections? Should I say my wireless is on the work network or on the internet? I want connections no matter where I am to always use the wifi first and then if it cant connect to use the GPRS connection. The way I have done it is to convigure everything to use my work network and added a GPRS connection to that. so the 'My ISP' option isnt even used any more.
Many Thanks for any assistance you can offer.
I have a WM5 device (HTC Wizard) and have the following situation:
My "Home" connection uses a proxy to connect to the internet over GPRS (from phone company) -- this works fine.
My "Work" connection uses a different proxy to connect to the internet over wifi (from my work) -- this works fine.
If I want to connect to a third network (my home wifi connection, an internet cafe) that doesn't use a proxy (or uses a different proxy) I need to modify the "Home" connection to remove the phone company proxy settings -- then this works fine. But when I want to get back on my GPRS connection, I need to go modify the proxy configuration again to put the settings back in.
Is there an easier way to move between >2 proxy configurations than setting/clearing/modifying the proxy configuration every time I move between networks? I'm looking for solutions native in the device - I'm sure there are hacks like setting up my own proxy and screwing with the forwarding rules to identify "phone is on WLAN, go directly to internet" vs. "phone is connecting from GPRS, chain through phone company proxy" which will cause me about as many headaches as just manually entering the information. Thanks in advance for any replies.
easist way is to set up a third connection with no proxy....
Have you actually tried doing this? WM5 supports two connections - one for automatic connections (which by default it calls "Home"), one for VPN (which by default it calls "Work"). I could create another network connection profile, but that trade-off is between a) reconfiguring the single network connection profile that my "Home" connection uses (via my provider's proxy or not) for b) reconfiguring which of two network connections the "Home" network connection selects. I don't want another bunch of clicks to jump through as I move from network to network, I want it to Just Work. I'd like the decision tree to go:
if (secured resource)
..use VPN ("Work")
else
..if (preferred network available)
....// this would be my 802.11 nets
....// each of which may have proxy information associated with it
....use that network (afaict, NYI)
..else
....use GPRS ("Home")
But it appears to be:
if (secured resource)
..use VPN ("Work")
else
..use GPRS ("Home")
A bit of an ugly workaround would be to use Opera Mobile - you can manually specify HTTP and/or HTTPS proxies in its own Preferences, as well as any proxy info you might have set up in your work profile.
As of yet, I've not found a way to have more than one proxied profile preconfigured, which is annoying as different buildings in my Uni use different wifi networks with their own proxies and ports typical.
How do you select what network connection to use? 99% of the time I only ever want the phone to connect to the internet over Wifi (or bluetooth/cable connection to the computer) and not using Cingular's network. There is the occasional time that I would like to enable that but most of the time I want to only use the Wifi. Where can I set so it doesn't connect to Cingular accidentally (say if I'm out of Wifi range or hit the wrong button) so i don't get large data charges?
Thanks
In connexion option set default internet connexion as "my work network" and privat network default as "my work network" as well.
So lemme just confirm something - unless I configure server settings on the a HTC TyTN (using stock rom) on the Cingular network - it will not be able to use Cingulars network right? The only time I will be able to access the internet with the phone is over wifi, bluetooth connection (or USB) with an internet enabled computer. Otherwise the internet will not function and I will not be charged data charges correct?
I don't really ever find myself using the internet on a phone when I'm away from home so I can't justify the expense of the data service but I work on a few websites that I'd like to look good on a cellphone so that's my main reason for wanting internet access on it - so while I'm at work I can log into the wifi system and test the site while I'm tweaking the code.
Am I correct in assuming that I shouldn't be charged under this situation?
Hi, I'm on Vodafone and I made the changes fun_key posted without noting down the original settings. Please can someone tell me what the default settings are for internet connection and private network connection. Thanks
Hi Everyone,
Having the Shift as my workhorse since some moths, there is still one annoyance I couldn't avoid: my VPN connections are interrupting the Internet connection when using 3G/HSDPA modem connecting to Internet in Vista/WM.
I was trying to search through all existing threads, but I still don't see anyone finding a solution.
I think the root lays in WM somewhere, since I cannot establish a PPTP connection in WM neither. In my case it is certainly not caused by the data provider, because I have checked it with them.
Let's try to put our knowledge together to sort this out !
This is normal behaviour I suppose
When connected to the VPN, the VPN must provide you with either a proxy or another internet gateway, otherwise you are just connected to a private network...
Maybe you mean something else, but from what I read it seems like you never got on the internet with VPN active.
If you did, and you are talking about intermittent network errors, then only high performance settings on your power settings may help.
If you could give more info I could help more. IP/Proxy/Gateway/ did it ever work yes no etc.
lucid said:
When connected to the VPN, the VPN must provide you with either a proxy or another internet gateway, otherwise you are just connected to a private network...
Maybe you mean something else, but from what I read it seems like you never got on the internet with VPN active.
If you did, and you are talking about intermittent network errors, then only high performance settings on your power settings may help.
If you could give more info I could help more. IP/Proxy/Gateway/ did it ever work yes no etc.
Click to expand...
Click to collapse
Lucid,
Thanks for replying. I will try to explain it another way.
1. When I am connected to Internet via Wifi, I have no problem using my VPN connection. I get authenticated and connected to the company network and the connection stays active as long as I want.
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
I hope this is more clear this way, any hints are very welcome !
jarbi said:
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
Click to expand...
Click to collapse
Thats exactly the same problem that i have had for over months - it just doesn't work and I can't see any way to get it to work - so much so, I don't use the Shift anymore - got a Tytn II and redfly and just remote desktop to a PC on the work lan!
jarbi said:
Lucid,
Thanks for replying. I will try to explain it another way.
1. When I am connected to Internet via Wifi, I have no problem using my VPN connection. I get authenticated and connected to the company network and the connection stays active as long as I want.
2. Using 3G/HSDPA Internet, the following happens:
- I start the same VPN connection, and get connected.
- Than my 3G/HSDPA connection breaks up, and the PPTP dialin stays alive - it doesn't have any use this way of course.
- When I disconnect from VPN, the 3G connection comes back automatically.
I hope this is more clear this way, any hints are very welcome !
Click to expand...
Click to collapse
The VPN that you are running is on VISTA side.(if yes try to see the routing table) by default the VPN get the default GW, and try to change it.
If this is the issue then you can go to the VPN connection properties -> Networking ->TCP/IP -> Properties -> Advanced -> IP Setings -> unchek the use the default GW on remote network.
regards
Is this a problem caused by this vista "feature", which disconnects the 3G Modem from Vista, as soon as an other network is being connected via WLan or via cable?
I think this is a stupid feature. Instead of that the users just should set the metrics for the networks manually and you can be sure, that Vista always uses the WLAN instead of the GSM/3G modem, if both where available.
alazarid said:
The VPN that you are running is on VISTA side.(if yes try to see the routing table) by default the VPN get the default GW, and try to change it.
If this is the issue then you can go to the VPN connection properties -> Networking ->TCP/IP -> Properties -> Advanced -> IP Setings -> unchek the use the default GW on remote network.
regards
Click to expand...
Click to collapse
alazarid,
Thanks a ton, the TCP/IP part did the trick ! Now my VPN has a use ).
cheers !
Ok guys heres the issue...
At first I thought this problem was associated with the fact that there may have been some software monitoring for other data connections, to disable the GSM modem when not needed...
After checking into everything, I found that there is probably NO software that does this...
Since WM handles the passthrough for the 3G connection, and ontop of that the actual endpoint for the data connection on the GSM connection is the WM side and not Vista, what happens is what when the VPN creates a connection and you opt-in to use the default remote gateway (I prefer to use it, because I require this for the work I do), the default gateway is updated on the 3G network interface.
I beleive that this update of configuration, then causes the WM side to stop the connection because either a) it doesn't know howto interprit this or b) retries to create the connection because it thinks there is an error.
I havn't played with this for a few weeks, and have my fair shareof other stuff I deal with, so I cannot remember if WM NATs the 3G connection, but the key thing breaking this is the WM side.
I beleive that IF you did want to hack up a configuration that uses the remote gateway, you could configure a VPN connection under Windows Mobile and have WM connect to the VPN, therefor the PC would be using that connection (but wouldn't be aware that its connected to the VPN), therefore giving the user access to the VPN, WITH the remote default gateway being used.
Again, as I mentioned its been a while since ive gone tech on my Shift, but I beleive this is correct. If anyone wants to add anything, please feel free.
Guys,
I'm hoping somebody with some time can just help me out here. My Touch HD is on Vodafone (UK) and I have some issues with connectivity.
I have a home wireless network, along with "Contract Internet" provided by Vodafone. If I start by telling you what I'm after. I basically want all my applications to use my "Contract Internet" network (GPRS/EDGE/HSDPA) by default, providing that there is NO active Wifi connection or USB connection. If there is, it is to use that.
Now the problem I have is that the only way I could ensure that my device connected to a) my home resources and shares (pc's and printers) and b) connect through my wireless router for gateway access to the internet (without the net attempting to launch GPRS connection) was to set both "Programs that automatically connect to the internet....." and "Programs that connect to a private network...." connection networks (Start, Settings, Connections, Networks, Network Management) to display "My Work Network" - this seems to allow that....however, when not connected to wifi, the GPRS or Contract Internet connection launches fine, but doesn't allow access to lots of applications which normally would utilise the network....only the internet works. Windows Live, RDP, you name it.....it doesn't work....unless I switch back the "Programs that automatically connect to the internet....." connection to "Contract Internet"
Ideas...help...please!
Cheers in advance
**bump** Please - at my wits end!